SPV M3000 - After installing programs like Vbar or Magic Button, I want it to run from the startup folder. Unforntunately the phone gives an error message saying that it 'cannot open the file 'Vbar' because of a missing certificate.
Does anyone know how I can still run these programs from startup?
Thanks in advance.
Henri
Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Thanks in advance
any ideas guys ???
Thanks
You most likely need to copy the nk.nbf file into the same directory as the romupdateutility.exe file.
I am having the same problem with my new mda IV compact i have tried to load the rom in every different way but still the same message comes up, i am trying to change radio settings to the 06 version. i have done the spl load but can't do a flash rom. any ideas please
I have the same problem i have installed HardSPL
But when i try to run the roms KaiserCustomRUU this error pops up
is there a certain program i should be using to run it? or did i save it wrong?
Make sure the phone is in active sync mode. My diamond i had this problem then realized that i had it in disk drive mode. switched it back and i was fine.
hey.. problem solved for me.
Click that "View README" button right next to the llast button you click before you get the error.
Where is that file located on your computer? For me it didnt load, but it said "could not find file at c:\windows\system32\readme.doc".
I took the cue, and moved my *.nbh file into the system32 folder. Voila! It was weird because I was running the ruu.exe file from the desktop (on a vista PC). I guess for some reason it was looking in system32??
So give the above a try. Might work for ya
Hi,
I am havıng the same prob.
I have trıed everythıng already lısıted ın here to no provail. The weırd thıng ıs that I have already used thıs rom.
I downloaded ıt and flashed my devıce but was havıng problems wıth hard resets occurıng randomly.
I read up on the rom (Dark vısıon) and ıt warned of thıs and suggested ınstallıng a dıfferent rom then tryıng agaın.
I ınstalled the recomend rom but when ı went to try and ınstal dark vısıon agaın...
for me it helped to just change the .image name to .nbh and it updated..
Daniel
I moved all the files to my desktop and it worked for me.
The last help was very usefull for me..
Regards,
im having the same problem on my HD2 can someone please help me
I also have the same problem, i tested all previous ways but nothing. Can you help me, thanks, My phone is not "company unlock" , i dont know whether it is due to locked phone.
I can't even find the NBH file. Virus software is disabled - anyone come across this one?
Hello, ive just upgraded to wm05 and my tomtom 6 worked perfectly before. now when i turn it on the back light goes off instantly. i have tried hex editing it from Backlight to Bbcklight but it comes up with an error when i try to open tomtom then. i have also tried downloading a pre patched one from this forum but still the same error.
Any help would be appreciated.
I have a xdaii
Thanks Andrew
Any help here at all please ive tried my hardest to get this working.
this is the error message i get when i open it with the patched file.
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
fixed it no worries now
andrew88 said:
fixed it no worries now
Click to expand...
Click to collapse
How did you get it working?
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Re: tomtom6 on xdaII
I have the same problem as you have. You said you hex edited tomtom navigator.exe. Which editor you are using and which location you are changing?
Help will be appriciated.
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
andreabix said:
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
Click to expand...
Click to collapse
Try this. I got it from one of the forums
Thanks a lot!!!
This fix worked fine for me.
pparmar said:
Try this. I got it from one of the forums
Click to expand...
Click to collapse
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
I have tried this and still no luck, the fix error message is still coming up, anyone any ideas?
im having the exact same problem
i have downloaded the file TomTom-Backlight-Fix.ZIP
i have copyed the file over to /program files/ navigator/
i am getting the error message
i have also downloaded and installed the fix-error-message.zip
i have extracted the .cab file to the root of the memory card and i have ran it.
it installed sucessfully.
but i am still getting the error message saying that the file is not signed or the components cannot be found.
could you please help me as i need tomtom 6 working as soon as possible
Same Problem
Guys, where does the file go? How do i use it?
Thanks.
Help with tomtom 6
I have a palm treo 650. I just downloaded tomtom 6 and U.S. maps online. I installed tomtom 6 on my phone. (im pretty sure I did it right). I have the navigator symbol and everytime I click it, it says, "tomtom sd card not found".
Well I put a bunch of crap on my sd card and tried it again. I clicked to open the navigator but this time, instead of it saying "tomtom sd card not found", the phone completely shut off on me, then restarted.
I dont know what i am doing.
can someone help me? thanks!
I don't know anything about palm treo 650, but I cleaned the SD card and transfered all tomtom6 files on my desktop computer using card reader. As soon as you insert SD card in to your palm itwill start installing. Try it it might work.
@Fudger: find out where Tomtom Navigator.exe is on your device and replace it by the one posted above.
@oakman: thanks for kicking this thread back up.
I already created another solution for myself, a mortscript that writes to backlight registry keys once Tomtom starts. It is less elegant, backlight flashes and Tomtom starts slower. So
@andrew88 Thanks a lot
Now @All:
I found several solutions on the web for Tomtom turning volume to 70% at start up, but I don't like any of them very much. Anyone who's been able to tweak Tomtom to set it to 100% default?
thanks
very
much
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
still struggling with backlight
Hi. I have TT6 v 6.01. I have an IPAQ 214, and whilst I used TT6 OK on my LOOX 720, I get the "no backlight" problem on the IPAQ. I have seen the suggestions here. Edit Backlight to Bbcklight first. On my TomTom Navigator.exe there is only one occurrence (UTF). I've edited that and saved. The version posted here seems to have only one occurrence too, but the addresses are different. Different release? Tried my edited version and got the error everyone else reports re certificate. So then I looked at the CAB file suggested to fix the error message. How should this be installed? I put it onto my SD card and found it using explorer on PDA. Double clicked and installed it to "device". No good. Then installed it to "File Store". No good. Then put it into Navigator folder and installed it. No good either. Anyone got any other ideas please?
I've got this same issue on an Ipaq 214 with Tomtom 6.
I can see the issue being described with editing the exe with a hex editor to reference the backlight function correctly, and like others I'm getting an issue with the cerfificate of the file.
TomTom6 does not have a cab called Cert_SPSC
How can I fix the certificate error with tomtom 6 ?
I've edited the TomTom Naviator.exe file correctly, and just need to fix the certificate error.
unicode editor
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
how can i get uni-code editor. is it available to download
uni code editor
How can I get uni code editor? I download hex editor but can not see the right code
Thanks,
Hi there,
I am Using the windows mobile crossbow version at the moment.... I must say with a few adjustments like splashscreens, Batteryindicator it is almost the perfect rom... Its to bad that i only have 7 options in my ComManager.. Think i'm missinig a few things...
Is there a possibility that the wm6 crossbow version can be modified so it will have the same ComManager options as the NDB WWE rom????
If anyone knows anything... or knows if this would be possible....???
thanks for the reply's
Try this...
http://forum.xda-developers.com/showthread.php?t=301580
Thanks allot will try that...
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Drakesilver said:
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Click to expand...
Click to collapse
I have a G3, so perhaps that makes a difference?
Drakesilver said:
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Click to expand...
Click to collapse
Where is the cab file before you try and run it, cus i find sometimes that if i have it on my sd card it doesnot like it, and i have to copy to main part. But then sometime if i replace the cab file it will work from the card!!! It has a mind of its own.
Hello guys,
when i try to create a backup of my HD7, both tools show an error message, related to the registry settings of the device. I used the EasyBackup Tool and the Cab Sender Tool. It says, that these registry settings are corrupt.
I don't know what the correct English translation is, because it shows a German error message.
I have no idea what this error means. I hope you can help me.
S51B14