Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Thanks in advance
any ideas guys ???
Thanks
You most likely need to copy the nk.nbf file into the same directory as the romupdateutility.exe file.
I am having the same problem with my new mda IV compact i have tried to load the rom in every different way but still the same message comes up, i am trying to change radio settings to the 06 version. i have done the spl load but can't do a flash rom. any ideas please
I have the same problem i have installed HardSPL
But when i try to run the roms KaiserCustomRUU this error pops up
is there a certain program i should be using to run it? or did i save it wrong?
Make sure the phone is in active sync mode. My diamond i had this problem then realized that i had it in disk drive mode. switched it back and i was fine.
hey.. problem solved for me.
Click that "View README" button right next to the llast button you click before you get the error.
Where is that file located on your computer? For me it didnt load, but it said "could not find file at c:\windows\system32\readme.doc".
I took the cue, and moved my *.nbh file into the system32 folder. Voila! It was weird because I was running the ruu.exe file from the desktop (on a vista PC). I guess for some reason it was looking in system32??
So give the above a try. Might work for ya
Hi,
I am havıng the same prob.
I have trıed everythıng already lısıted ın here to no provail. The weırd thıng ıs that I have already used thıs rom.
I downloaded ıt and flashed my devıce but was havıng problems wıth hard resets occurıng randomly.
I read up on the rom (Dark vısıon) and ıt warned of thıs and suggested ınstallıng a dıfferent rom then tryıng agaın.
I ınstalled the recomend rom but when ı went to try and ınstal dark vısıon agaın...
for me it helped to just change the .image name to .nbh and it updated..
Daniel
I moved all the files to my desktop and it worked for me.
The last help was very usefull for me..
Regards,
im having the same problem on my HD2 can someone please help me
I also have the same problem, i tested all previous ways but nothing. Can you help me, thanks, My phone is not "company unlock" , i dont know whether it is due to locked phone.
I can't even find the NBH file. Virus software is disabled - anyone come across this one?
Related
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Normally you just have to try agaion without resettiong yout device. Just restart your computer and restart the upgrade. If it says USB V1.00 it's much better then it says nothing ! i'm shure it will not be dead at thîs point !!
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
embraser said:
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
Click to expand...
Click to collapse
That's the country id error normally its simple to get that propblem solved but i don't know how, it must be somewhere at the forum here
I tryed using this:
MaUpgradeUt_noID.exe
but got a .dll error
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
kta said:
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
Click to expand...
Click to collapse
I'm about to give up...
This gets more complicated as a new attempt to help me arrives.
What other files in the TEMP folder are you talking about?
I think I'm probably in need of a step by step, because I don't know anymore what to do with all the files you guys were so kind on giving me.
Please...
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
HighPingBastard said:
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
Click to expand...
Click to collapse
6. you will get a country id error..... don't panic leave the device connected and run the MAUpgradeUT_noID again and everything should go fine......
cheeeeeeeers
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
embraser said:
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
Click to expand...
Click to collapse
Did you extract the rom into the folder? If you Unzip ma_tmde_10601_130_10500_ship.zip you end up with a file called ma_tmde_10601_130_10500_ship.exe. Once you have this file, you should right click on it and use the "extract here" option. If you do not have this option then you need to install winrar.
The folder you extract the rom to should have the following files visible.
EnterBL.exe
GetDeviceData.exe
MaUpgradeUT.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
copy over the no country file and re run it following the above instructions.
I did all you told me to do, downloaded the
ma_tmde_10601_130_10500_ship.zip
extracted the
MA_TMDE_10601_130_10500_Ship.exe
then right-clicked on it an there's no extraction option, only compression on winrar.
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Finally some progress.
I used the
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
file and it did something in 2 stages, some radio upgrade and then something else, but nothing else.
Now what?
dary said:
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Click to expand...
Click to collapse
after that is there any way to put it in english?
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Now your s100 will be able to turned on =)
and after that an error
then this happens...
I've tried another rom image for my mda compact 2 and now my mdac2 does'nt start any more.
I have tried several rom-images (for compact, atom, ewtc..), but I can install no one .
On the T-Mobile Homepage there is no Image for the MDAc 2.
Can anyone help me ?
I only come to the bootloder screen (red - green - blue).
I need a rom-image, that i can start from the bootloader.
thx
Try this link from TMO UK http://t-mobile.iris-global.com/download_manager_mda_com2.html
Success, M
I've already tried this, and it starts updating but then comes the message :
ERROR [294] : INVALID VENDER ID
THis Update Utility cannot be used for your PDA Phone.....
Maybe I have to unlock the CID first ?
But can I unlock the CID with the aWizard, when the Comp.2 is in the Bootloader mode (red-gree-blue) ?
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
In the unzipped folder is no file like RUU.conf.
Only RUU.dll and RUUREsource.dll
There are following files in the folder
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.xex
RUUGetInfoi.exe
RUUResource.dll
RUU.dll
And I've downloaded " nbfdec " , but I can not start this program.
I think i have to reboot my computer.
un zip all the files from the t-mobile package
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
download this and unrar and overwrite in the same folder.
connect up the phone in bootloader to pc and run the ..._NoID.exe
as theres no activesync connection it will pause for a bit on the checking existing rom but still let you carry on
ignore the picture of the wizard, just make sure your installing the right nk.nbf for the compact 2
I've exactly done what you said, the update ended with 100 % and now the device starts until the bootloader-screen (red-green-blue).
Have I done something wrong ?
What has happened ?
dave106 said:
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
Click to expand...
Click to collapse
That's the one I was referring to, thanks.
Bundy did you reset afterwards?
M
Yes, I did a Hardreset, a Softreset , but I only get to the picture with the 3 colors.
IPL 1.12
SPL 2.15
I'm terribly sorry, but we've ran out of my knowlegde of the MDA Compact II. So besides the usual question: have you ran the update a second time, for me this would be warranty issue.
Hope Dave is worth more.
Good luck, M
Yes , I have done the update a second time, but with the same effect - the device only starts in the three-color-screen.
So I think I can do nothing more ....
:-(
Hello, ive just upgraded to wm05 and my tomtom 6 worked perfectly before. now when i turn it on the back light goes off instantly. i have tried hex editing it from Backlight to Bbcklight but it comes up with an error when i try to open tomtom then. i have also tried downloading a pre patched one from this forum but still the same error.
Any help would be appreciated.
I have a xdaii
Thanks Andrew
Any help here at all please ive tried my hardest to get this working.
this is the error message i get when i open it with the patched file.
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
fixed it no worries now
andrew88 said:
fixed it no worries now
Click to expand...
Click to collapse
How did you get it working?
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Re: tomtom6 on xdaII
I have the same problem as you have. You said you hex edited tomtom navigator.exe. Which editor you are using and which location you are changing?
Help will be appriciated.
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
andreabix said:
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
Click to expand...
Click to collapse
Try this. I got it from one of the forums
Thanks a lot!!!
This fix worked fine for me.
pparmar said:
Try this. I got it from one of the forums
Click to expand...
Click to collapse
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
I have tried this and still no luck, the fix error message is still coming up, anyone any ideas?
im having the exact same problem
i have downloaded the file TomTom-Backlight-Fix.ZIP
i have copyed the file over to /program files/ navigator/
i am getting the error message
i have also downloaded and installed the fix-error-message.zip
i have extracted the .cab file to the root of the memory card and i have ran it.
it installed sucessfully.
but i am still getting the error message saying that the file is not signed or the components cannot be found.
could you please help me as i need tomtom 6 working as soon as possible
Same Problem
Guys, where does the file go? How do i use it?
Thanks.
Help with tomtom 6
I have a palm treo 650. I just downloaded tomtom 6 and U.S. maps online. I installed tomtom 6 on my phone. (im pretty sure I did it right). I have the navigator symbol and everytime I click it, it says, "tomtom sd card not found".
Well I put a bunch of crap on my sd card and tried it again. I clicked to open the navigator but this time, instead of it saying "tomtom sd card not found", the phone completely shut off on me, then restarted.
I dont know what i am doing.
can someone help me? thanks!
I don't know anything about palm treo 650, but I cleaned the SD card and transfered all tomtom6 files on my desktop computer using card reader. As soon as you insert SD card in to your palm itwill start installing. Try it it might work.
@Fudger: find out where Tomtom Navigator.exe is on your device and replace it by the one posted above.
@oakman: thanks for kicking this thread back up.
I already created another solution for myself, a mortscript that writes to backlight registry keys once Tomtom starts. It is less elegant, backlight flashes and Tomtom starts slower. So
@andrew88 Thanks a lot
Now @All:
I found several solutions on the web for Tomtom turning volume to 70% at start up, but I don't like any of them very much. Anyone who's been able to tweak Tomtom to set it to 100% default?
thanks
very
much
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
still struggling with backlight
Hi. I have TT6 v 6.01. I have an IPAQ 214, and whilst I used TT6 OK on my LOOX 720, I get the "no backlight" problem on the IPAQ. I have seen the suggestions here. Edit Backlight to Bbcklight first. On my TomTom Navigator.exe there is only one occurrence (UTF). I've edited that and saved. The version posted here seems to have only one occurrence too, but the addresses are different. Different release? Tried my edited version and got the error everyone else reports re certificate. So then I looked at the CAB file suggested to fix the error message. How should this be installed? I put it onto my SD card and found it using explorer on PDA. Double clicked and installed it to "device". No good. Then installed it to "File Store". No good. Then put it into Navigator folder and installed it. No good either. Anyone got any other ideas please?
I've got this same issue on an Ipaq 214 with Tomtom 6.
I can see the issue being described with editing the exe with a hex editor to reference the backlight function correctly, and like others I'm getting an issue with the cerfificate of the file.
TomTom6 does not have a cab called Cert_SPSC
How can I fix the certificate error with tomtom 6 ?
I've edited the TomTom Naviator.exe file correctly, and just need to fix the certificate error.
unicode editor
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
how can i get uni-code editor. is it available to download
uni code editor
How can I get uni code editor? I download hex editor but can not see the right code
Thanks,
Hi there,
I am Using the windows mobile crossbow version at the moment.... I must say with a few adjustments like splashscreens, Batteryindicator it is almost the perfect rom... Its to bad that i only have 7 options in my ComManager.. Think i'm missinig a few things...
Is there a possibility that the wm6 crossbow version can be modified so it will have the same ComManager options as the NDB WWE rom????
If anyone knows anything... or knows if this would be possible....???
thanks for the reply's
Try this...
http://forum.xda-developers.com/showthread.php?t=301580
Thanks allot will try that...
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Drakesilver said:
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Click to expand...
Click to collapse
I have a G3, so perhaps that makes a difference?
Drakesilver said:
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Click to expand...
Click to collapse
Where is the cab file before you try and run it, cus i find sometimes that if i have it on my sd card it doesnot like it, and i have to copy to main part. But then sometime if i replace the cab file it will work from the card!!! It has a mind of its own.
Hello
I have been busy reading this forum and i has been a great help, I have been given 3 phones 2 o2 XDA IQ & a Vodafone V1240 2 of them need repairing new keyboard and casings on them which i found on ebay.
Back to the question is there anyway of changing the boot screens on the xda ia as when it boots it has the welcome to 02 and then a bubble screen could these be changed?? i am running the orignal wm5 but i did flashed it with wm6 rom the beta version but nothing has changed??
Cheers
Brogusblue
http://forum.xda-developers.com/showthread.php?t=318423
that thread should explain how to do it.
chribruu said:
http://forum.xda-developers.com/showthread.php?t=318423
that thread should explain how to do it.
Click to expand...
Click to collapse
here you go...
plug your phone in. run this program. then go to tools/immediate flash tools...and you should have a function called splash screen or something like that. point to the desired file. update... restart your phone and it should work. with this prog, you can also extract splash screen from a nbf file.
Hello
Thanks, I have plugged the phone in and ran program but i get "No file loaded, immediate flash not available (Client DLL not found)"
Cheers
Brogusblue
Choose, Test Immediate Flash, on your phone, TyphoonNBFtool.dll will prompt you to give it permission to run , allow it
Hello
I am completely confused, Downloaded the file to pc unzipped and ran program and get "No file loaded, immediate flash not available (Client DLL not found)" and that's how far i get the phone does prompt me. i have had a look on my phone and found the file "TyphoonNBFtool.dll"??
Cheers
Brogusblue
You need to extract the archive to a folder first, then click Test Immediate Flash, then TyphoonNBFtool.dll will prompt you to allow access