Related
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Normally you just have to try agaion without resettiong yout device. Just restart your computer and restart the upgrade. If it says USB V1.00 it's much better then it says nothing ! i'm shure it will not be dead at thîs point !!
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
embraser said:
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
Click to expand...
Click to collapse
That's the country id error normally its simple to get that propblem solved but i don't know how, it must be somewhere at the forum here
I tryed using this:
MaUpgradeUt_noID.exe
but got a .dll error
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
kta said:
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
Click to expand...
Click to collapse
I'm about to give up...
This gets more complicated as a new attempt to help me arrives.
What other files in the TEMP folder are you talking about?
I think I'm probably in need of a step by step, because I don't know anymore what to do with all the files you guys were so kind on giving me.
Please...
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
HighPingBastard said:
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
Click to expand...
Click to collapse
6. you will get a country id error..... don't panic leave the device connected and run the MAUpgradeUT_noID again and everything should go fine......
cheeeeeeeers
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
embraser said:
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
Click to expand...
Click to collapse
Did you extract the rom into the folder? If you Unzip ma_tmde_10601_130_10500_ship.zip you end up with a file called ma_tmde_10601_130_10500_ship.exe. Once you have this file, you should right click on it and use the "extract here" option. If you do not have this option then you need to install winrar.
The folder you extract the rom to should have the following files visible.
EnterBL.exe
GetDeviceData.exe
MaUpgradeUT.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
copy over the no country file and re run it following the above instructions.
I did all you told me to do, downloaded the
ma_tmde_10601_130_10500_ship.zip
extracted the
MA_TMDE_10601_130_10500_Ship.exe
then right-clicked on it an there's no extraction option, only compression on winrar.
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Finally some progress.
I used the
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
file and it did something in 2 stages, some radio upgrade and then something else, but nothing else.
Now what?
dary said:
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Click to expand...
Click to collapse
after that is there any way to put it in english?
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Now your s100 will be able to turned on =)
and after that an error
then this happens...
Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Thanks in advance
any ideas guys ???
Thanks
You most likely need to copy the nk.nbf file into the same directory as the romupdateutility.exe file.
I am having the same problem with my new mda IV compact i have tried to load the rom in every different way but still the same message comes up, i am trying to change radio settings to the 06 version. i have done the spl load but can't do a flash rom. any ideas please
I have the same problem i have installed HardSPL
But when i try to run the roms KaiserCustomRUU this error pops up
is there a certain program i should be using to run it? or did i save it wrong?
Make sure the phone is in active sync mode. My diamond i had this problem then realized that i had it in disk drive mode. switched it back and i was fine.
hey.. problem solved for me.
Click that "View README" button right next to the llast button you click before you get the error.
Where is that file located on your computer? For me it didnt load, but it said "could not find file at c:\windows\system32\readme.doc".
I took the cue, and moved my *.nbh file into the system32 folder. Voila! It was weird because I was running the ruu.exe file from the desktop (on a vista PC). I guess for some reason it was looking in system32??
So give the above a try. Might work for ya
Hi,
I am havıng the same prob.
I have trıed everythıng already lısıted ın here to no provail. The weırd thıng ıs that I have already used thıs rom.
I downloaded ıt and flashed my devıce but was havıng problems wıth hard resets occurıng randomly.
I read up on the rom (Dark vısıon) and ıt warned of thıs and suggested ınstallıng a dıfferent rom then tryıng agaın.
I ınstalled the recomend rom but when ı went to try and ınstal dark vısıon agaın...
for me it helped to just change the .image name to .nbh and it updated..
Daniel
I moved all the files to my desktop and it worked for me.
The last help was very usefull for me..
Regards,
im having the same problem on my HD2 can someone please help me
I also have the same problem, i tested all previous ways but nothing. Can you help me, thanks, My phone is not "company unlock" , i dont know whether it is due to locked phone.
I can't even find the NBH file. Virus software is disabled - anyone come across this one?
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356
animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
What boot screen are you looking for? Or do you want to creat your own one?
Yes, I want to use my own! It's an Anime picture like my nickname!
welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom
I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx
Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027
first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf
welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse
flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse
can you please tell me what exactly should I do?
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it
Btw, this is where I got the ability to cook my splash screen on my ROMs. You know the first bootscreen.
Here.
I don't speak Vietnamese, but it's pretty easy to figure out. If you don't understand me, tell me and I'll write a walkthrough. The pictures tell it all, though.
EDIT:
Things you need:
-Thay Doi_SplashScreen.
-NBH_Tool_v1.1.
-HTC_ROM_Tool.
Create a BMP or JPG that's 240x320.
Run Chạy Tool Replace SplashScreen.exe
Click Load Bitmap and choose your file.
Click Update Splash.
It will create the needed files where the BMP/JPG is currently stored.
Take the ruu_signed.nbh and use NBH_Tool_v1.1 to extract the PrimarySplash.nb that you can use with your ROM.
you should probably type it up anyway. hah
Thanks for the link, Ivan
Can someone upload the files, I cant read the site so I cant make a log in lol.
Thx
Write up
Hi,
I will try to write this up today as time allows.
How-To
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
ttran001 said:
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
Click to expand...
Click to collapse
Thanks Ttran!! I knew someone would step in and help me in my time of laziness.
Dumb Question
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
zcink said:
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
Click to expand...
Click to collapse
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
ttran001 said:
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
Click to expand...
Click to collapse
Okay got it. Will try it. Thanks.
by the way, thanks so much for using Megaupload and Not Rapidshare. Megaupload is by far the best.
I'm nervous about doing this but here goes.
Just one question. I put the PrimarySplash.nb in splash box and not system box -- right?
Please advise.
thanks. (I just don't want to brick my phone.)
Got it -- worked. You are a Genius.
Okay I did what I thought and it worked great. Thanks again!!!!!
yay for viets! (sorry gotta represent)
found this...not sure if you can do anything with it
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Haven't tested that, but it's probably for one of the other two startups. The first startup cannot be changed without flashing.
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Be nice if you could tweak this. Says ROM by Tom Condron. Nice graffics though. Uninstalled.
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
chris30_2001 said:
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
Click to expand...
Click to collapse
did you make the picture that you want for the flash screen ? Did you download the easy how to as well ???
Ok I am no noob .. Maybe im too tired or I missed something somewhere in all of this. So let me ask all the dumb questions and hopefully you can make this a sticky clearly explained. Lets start will all the directions 1 by 1 and hopefully 1 of you geniuses can clean it up then hopefully make a sticky .....
A.) Download all files needed. (assistance is more than welcomed here)
B.) get the picture you want to use for your splash screen.
(**Instructions written by ttran001**)
1. Copy the image you would like to use into the image folder.
2. Open up the Step 1 folder and run the Replace SplashScreen.exe file.
3. Click on Load Bitmap from the newly opened menu (Replace Artemis SPlashScreen.
4. Click on the Update Splash button.
The PDA Phone ROM Update Utility 3.0.3.1 menu will pop up.
Leave it alone.
5. Go back to the image folder for step 1 and locate the RUU_signed.nbh file.
6. Copy the RUU_singed.nbh and place it into the RUU_signed folder.
7. Go back and close out both PDA Phone ROM Update Utility 3.0.3.1 and Replace Artemis SplashScreen.
8. Now go to the step 2 folder and double click on the nbhtool.exe.
9.This will open up Dutty's good NBH tool v1.1.
10. Click on the Decompile NBH file button.
11. Browse back to the RUU_singed folder and locate the new RUU_signed.nbh file.
12. Choose the same location or the one of your choosing to save the extract files.
13. Once completed it will extract a new file called PrimarySplash.nb, this is your new Splash replacement file.
OK we now have that part as easy as can be. Now the next parts for creating a nbh file.
Download and extract the HTC_ROM_Tool to your computer.
Double click on the htcrt.exe file to get started.
This new screen will popup.
Click on the Build! button.
On this screen click on the box under the Device: to select your device type.
Choose Herald
Type in your version of the rom, example: 4.10.531.3
Click on the box highlighted in red to choose your OS.nb file.
( Now where do we get this file from i would like that clarified and have it added to a download list for the sticky please.)
Click on the Build ROM botton.
This new screen will popup.
OK ... Now we have a nbh file... Now what would be the correct way of flashing this to a device. also the basic questions.
1.) Will this delete and or change my settings. ?
2.) What are the risks of flashing this way ?
3.) Does this work with HardSPL ?
4.) Does this work without HardSPL ?
5.) Must the picture be a bitmap ?
6.) Can I just use the ReplaceSplashScreen to just change the splash screen ?
7.) Does the program ReplaceSplashScreen work on wing before HardSPL or after or both ?
8.) Maybe im really tired how do I put pictures in this thread ... LOL ...
If I want to change the Windows Mobile splash also, do I change the name from "PrimarySplash" to "Secondary Splash"? or something? thanks.
first to post here
as i saw that HP rx1950 has got a Windows Mobile 6.1 Custom ROM..
but my device doesn't have the same language as the custom ROM pack, so i can't update it...
i've searched through the forum and the internet... there had been some ROMs posted,, but the links were dead already
anyone who still have this device, hope u can kindly extract the Stock WM5 English ROM for me
thanks a lot for your help, and sorry for my poor english..
martin
Just upgrade you phone, language of your current ROM doesn't make a difference .
Here is a kitchen ROM of WM 6.1 Classic for rx1950 from xda members Victory144 and Guifort.
http://www.mediafire.com/file/nna2yo92q2beiik/Flasher_Hp_Ipaq_rx1950_ENG_WM6.1.rar
I agree with tomcug. It should flash your ROM to WM 6.1 regardless of the language. You need to use it on a Windows XP computer with ActiveSync installed though...
Here is the original thread for more help:
http://forum.xda-developers.com/showthread.php?t=510764
RumoredNow said:
Here is a kitchen ROM of WM 6.1 Classic for rx1950 from xda members Victory144 and Guifort.
http://www.mediafire.com/file/nna2yo92q2beiik/Flasher_Hp_Ipaq_rx1950_ENG_WM6.1.rar
I agree with tomcug. It should flash your ROM to WM 6.1 regardless of the language. You need to use it on a Windows XP computer with ActiveSync installed though...
Here is the original thread for more help:
http://forum.xda-developers.com/showthread.php?t=510764
Click to expand...
Click to collapse
I've read the post.. there're two methods to flash the WM6.1 ROM, by SD or through USB.. but i failed with a message "Wrong Image" after cloning the image to SD card, and the lauguage problem while flashing through USB with stock update utility (that maybe some lock by HP on language. mine is Chinese Traditional, but the update image is English..)
therefore, that'll be fine if the English Stock ROM is available.. btw, is there any program to flash that bypass the lock??
or how to change the language option of the ROM generated by kitchen?
i am not very familiar to configure the kitchen
thank you for your help
Here is a very technical discussion of 2 methods for installing different language ROMs.
http://www.tweaks2k2.com/How_to/39xxROMlang.htm
You will need a HexEditor:
http://www.mediafire.com/file/6r8ffn1fq3bh9mu/uedit32.exe
And a mtty program:
http://www.mediafire.com/file/7srppxvnr728ime/mtty11a.exe
BUT - at the end of method two when the author says - At the terminal screen type "lnb nk.nb0" at the USB prompt. (That means: Load the ROM nk.nb0)
INSTEAD - use the command "l nk.nb0"
That may be a typo - or the difference in mtty versions used by myself and the author...
thank you for your suggestion, i see that the ROM file structure of 3950 is a bit similar to rx1950, so i will try to change that
i've got the kitchen and the whole system downloaded from the site u suggested, but i just can't figure out how to change the language code of the output file while building the ROM , so that i can fool the ROM Update Utility and flash the ROM to my PDA..
wt's Build_XIP?
do u hv any suggestions? thx again
martin
Build_XIP... I think that is something for a different device. confused
_____
The following is based on research and guesswork. I make NO CLAIM that it will work and not damage your device... TRY AT YOUR OWN RISK.
_____
If my experiments with mtty and my reading of the How to install a different language tutorial are correct, all you need is:
mtty11a.exe to send commands to your iPAQ.
The English WM 6.1 ROM Image (CEOS.nbf) you want to upgrade to.
And Uedit32 to edit the ROM.
Put all 3 files in the same folder. It will be easiest to create a new folder on desktop with whatever name you like.
_____
This is for a Windows XP computer. That is what you have, yes?
First be sure to BACKUP your iPAQ and put all files in a safe place on your PC.
Next - remove the battery and any SD cards from the rx1950. Wait at least 10 minutes for the internal battery to discharge so that the iPAQ is cleared of all memory except the ROM you want to overwrite.
_____
Now we want to save the Chinese ROM you have so we can restore it if anything goes wrong. Best to be safe, yes?
Do you have a spare SD card at least 256mb? If not, use the one you normally have in rx1950... See why we saved all your files first?
Kill ActiveSync by opening Task Manager>Processes. Look on the list for wcesmgr.exe and wcescomm.exe. Highlight each one and click on End Process. With ActiveSync killed you can now "talk" to iPAQ with mtty.
DO NOT PUT IN THE BATTERY. Attach the iPAQ to the PC with the USB cable AND the AC Power Cord. Turn the iPAQ on and manually enter Bootloader Mode. (Google tells me for rx1950 you - press following buttons simultanously
Contacts + Mail + Reset for as long as your PDA boots)
Insert the SD card where you want to save the Chinese WM 5 ROM.
Go to the folder where you saved the 3 files you need and double click mtty11a.exe. That opens a box called "Open port setting." Scroll down the list in "Port" and look for \\\WCEUSBSH001. That is the port you want. I noticed that the end number (001) changes with each use of mtty. Never mind the number so much, \\\WCEUSBSH00x is what you want - that is your iPAQ. Select that port and click on the "OK" button.
It should open a command terminal (white window). Press enter until USB> appears in the window. I only needed to press enter once, but some tutorials say keep pressing until it appears. (?)
At the USB> prompt type r2SD and press enter. This will have mtty command your iPAQ to dump your ROM image onto the SD Card as RAW DATA. Wait for the progress bars on iPAQ screen to finish and you get a completed message.
Save this SD card in a safe place. This is your Recovery Image to restore the iPAQ back to the ROM you started with. The card is not formatted in a way that you can open and read with Windows XP so do not try putting it in a card reader right now - XP will want to format it and we don't want that to happen.
_____
If you need to recover your iPAQ at any point...
Unplug the iPAQ from PC and AC power cords. Remove battery and SD card. Wait 10 minutes to reset memory.
Insert SD card with Recovery Image. Plug in the AC power cord. Turn on iPAQ. Enter Bootloader Mode. iPAQ will see the Image on the SD card and offer you the option to Flash your ROM or exit. Pick the option to flash your ROM.
The iPAQ will Hard Reset after it flashes and then you can remove the SD card with the Recovery Image and do a Restore from the files you saved on PC and/or your regular SD card and the Backup we did at the beginning of this experiment.
_____
Now that we are safe, we can start to try and change the English WM 6.1 ROM so you can flash it to your iPAQ.
I read the "How to install a different language" tutorial quite a few times. Here are my calculations for what we need:
Original checksum
minus HexSum of ENG (45+4E+47 = DA)
equals change value
or
ECEC
-DA
= EC12
HexSum of CHT (43+48+54 = DF)
plus change value
equals new checksum
or
DF
+ EC12
= ECF1
Then that means we change ENG (code for English) to CHT (code for Chinese Traditional) and also change the Checksum from ECEC to ECF1 and we can get the ENG ROM to load on your CHT rx1950.
_____
Now you need to edit the ROM. Go to the folder where you saved the 3 files you need and double click uedit32.exe to open the Hex Editor. Click on "File>Open" and navigate to the folder where you put your files. Select CEOS.nbf and Uedit will open it.
10 lines down (line 00000090h) the file says "..........ENG.hp"
Next line 000000a0h says "iPAQ rx1950...."
This may or may not be the place to change - But I believe it is the right spot to tell any updater program what iPAQ version to update...
Scroll down to line 00000ea0h where it says "..........ECEC^a"
Next line 00000eb0h says ".e^a..........."
I believe that is the ROM Checksum and then an order to verify the checksum from iPAQ...
Scrolling down farther to line 00001ec0h it says " iPAQ rx1950..6."
Next line 00001ed0h says "00.00 ENG......."
I believe this tells any updater program what version is being flashed. But it may need to be changed...
So my best guess is:
At the first spot ENG is listed (line 00000090h) you need to edit ENG to CHT
At line 00000ea0h you need to edit ECEC to ECF1
Make these changes with Uedit32 and then click "File>Save as" and label the file "Test.nbf" saving it to the folder we have been using. (Note that mtty and any files you want to flash MUST be in the same directory.)
In Uedit32 click on "File>Close All Files" and exit Uedit32. Now you have 2 versions of the ROM in your folder...
_____
mtty still open and iPAQ connected?
If not - connect iPAQ as above (no battery or SD card, wait ten minutes, connect with USB and AC power, put rx1950 into Bootloader Mode). Open mtty. Navigate to your port and get a USB> prompt.
At USB> type in "l Test.nbf" (no quotes) and it should try to flash the edited ROM to rx1950.
If it was edited wrong you will get an error message something like "Header request time out."
_____
If it doesn't work that way it shouldn't affect your iPAQ and a Hard Reset should be all you need to restore your system. If that fails we have the SD card Restore Image we made earlier.
Delete the Test.nbf file from the folder and try editing CEOS.nbf again.
Try changing the Checksum and the second time ENG is listed:
At line 00000ea0h you need to edit ECEC to ECF1
At line 00001ed0h you need to edit ENG to CHT
Save as Test.nbf and have mtty "l Test.nbf" again
If it fails, delete Test.nbf
The last try would be by editing the Checksum and both times ENG is listed:
At line 00000090h you need to edit ENG to CHT
At line 00000ea0h you need to edit ECEC to ECF1
At line 00001ed0h you need to edit ENG to CHT
Save as Test.nbf and have mtty "l Test.nbf" again
_____
I hope one of these works for you. Please let us know what happens.
Thanks.
thanks for your suggestions very much!!
but i get the File CRC checksum error when using the stock update utility,
and through mtty.exe, it shows "Header Request Time out" also, in both i changed the first mentioned "ENG" to "CHT", second time and both times ...
all failed
would there any way to flash it through SD (by creating a suitable .nb0 file?) ?
hurray!!!!
i've cheated the HP ROM Update Utility (RUU) to accept to update an English ROM to a Chinese machine !!!
i use WinHex to replace the ENG with CHT, CHT with ENG,, and it's OK now!!!!
anyway, thank you very very very much for your sincere help!!!!!!!!!
Really marvellous!!!
HUZZAH and Congratulations martinhy!!!!!
I'm glad you got it to work.
I was at the keyboard for about 4 hours playing with the files last night and was afraid that my guess was wrong (as it turns out it was). So I'm really surprised and pleased that you solved it.
You just edited the RUU??? All other files in the kitchen folder stay the same???
Cause I need to cheat it and make it change from rx1950 to rx3115... I'll be trying your method soon.
it's troublesome to change ,, or i can say, cheat, the ROM file (.nbf) itself, coz it has checksum .. and the algorithm may be difficult to guess, and changing with different versions of iPAQ,
but the RUU itself doesn't have the integrity check, so it's cheatable
anyway, thx for your effort to help me
i can't be sure whether your guess is wrong, coz when i download the stock ROM, i.e. "l CEOS.nbf" to the iPAQ, through mtty, i also says "header request timed out"..
so i can't be sure whether there's problem for the way to edit the ROM, or the iPAQ doesn't support such mtty method...
or........
. becoz i'm a newbie, maybe i've got something wrong though...
*sigh*
When I try to change the RUU from rx1950 to rx3115 and run the rx1950 upgrade kitchen I get the CRC error...
When I try to change the .nbf and put it in with a rx3115 update package I get 244 Error (model ID)...
When I pull on my hair it comes out in big chunks...
I think I need a lot more study and a new toolkit...
that's maybe quite a challenge to flash ROMs from other models rather than language... both models are not compatible
martinhy said:
hurray!!!!
i've cheated the HP ROM Update Utility (RUU) to accept to update an English ROM to a Chinese machine !!!
i use WinHex to replace the ENG with CHT, CHT with ENG,, and it's OK now!!!!
anyway, thank you very very very much for your sincere help!!!!!!!!!
Really marvellous!!!
Click to expand...
Click to collapse
can you help me do that ? thanks