Related
Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Thanks in advance
any ideas guys ???
Thanks
You most likely need to copy the nk.nbf file into the same directory as the romupdateutility.exe file.
I am having the same problem with my new mda IV compact i have tried to load the rom in every different way but still the same message comes up, i am trying to change radio settings to the 06 version. i have done the spl load but can't do a flash rom. any ideas please
I have the same problem i have installed HardSPL
But when i try to run the roms KaiserCustomRUU this error pops up
is there a certain program i should be using to run it? or did i save it wrong?
Make sure the phone is in active sync mode. My diamond i had this problem then realized that i had it in disk drive mode. switched it back and i was fine.
hey.. problem solved for me.
Click that "View README" button right next to the llast button you click before you get the error.
Where is that file located on your computer? For me it didnt load, but it said "could not find file at c:\windows\system32\readme.doc".
I took the cue, and moved my *.nbh file into the system32 folder. Voila! It was weird because I was running the ruu.exe file from the desktop (on a vista PC). I guess for some reason it was looking in system32??
So give the above a try. Might work for ya
Hi,
I am havıng the same prob.
I have trıed everythıng already lısıted ın here to no provail. The weırd thıng ıs that I have already used thıs rom.
I downloaded ıt and flashed my devıce but was havıng problems wıth hard resets occurıng randomly.
I read up on the rom (Dark vısıon) and ıt warned of thıs and suggested ınstallıng a dıfferent rom then tryıng agaın.
I ınstalled the recomend rom but when ı went to try and ınstal dark vısıon agaın...
for me it helped to just change the .image name to .nbh and it updated..
Daniel
I moved all the files to my desktop and it worked for me.
The last help was very usefull for me..
Regards,
im having the same problem on my HD2 can someone please help me
I also have the same problem, i tested all previous ways but nothing. Can you help me, thanks, My phone is not "company unlock" , i dont know whether it is due to locked phone.
I can't even find the NBH file. Virus software is disabled - anyone come across this one?
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Here is my question. When I install new program using PC (through ActiveSync) it seems that ActiveSync will transfer CAB file (which is inside .exe) and then - install it as usual. So ... where will be those CAB files located and will they be deleted after installation if delete-cab-after-install feature is disabled ?
During TRANSFER ActiveSync does not ask .... "Do you want your CAB to be transferred to SD card or main memory", right ? It only asks during INSTALLATION of the CAB.
I make lots of installations using ActiveSync and would like to know if I'm not filling my valuable disk space (on phone itself) with junk CAB files.
bogdatov said:
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Here is my question. When I install new program using PC (through ActiveSync) it seems that ActiveSync will transfer CAB file (which is inside .exe) and then - install it as usual. So ... where will be those CAB files located and will they be deleted after installation if delete-cab-after-install feature is disabled ?
During TRANSFER ActiveSync does not ask .... "Do you want your CAB to be transferred to SD card or main memory", right ? It only asks during INSTALLATION of the CAB.
I make lots of installations using ActiveSync and would like to know if I'm not filling my valuable disk space (on phone itself) with junk CAB files.
Click to expand...
Click to collapse
I think that it stores them in the temp dir...which is deleted after soft reset
bogdatov said:
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Here is my question. When I install new program using PC (through ActiveSync) it seems that ActiveSync will transfer CAB file (which is inside .exe) and then - install it as usual. So ... where will be those CAB files located and will they be deleted after installation if delete-cab-after-install feature is disabled ?
During TRANSFER ActiveSync does not ask .... "Do you want your CAB to be transferred to SD card or main memory", right ? It only asks during INSTALLATION of the CAB.
I make lots of installations using ActiveSync and would like to know if I'm not filling my valuable disk space (on phone itself) with junk CAB files.
Click to expand...
Click to collapse
Thats why I prefer to extract the cab out of the C:\Programs\Activesync and copy them to SDcard. Pro: you have all needed programs on SDcard and do not have to install throu activesync.
bogdatov said:
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Click to expand...
Click to collapse
hi,but i have the same problem and i cant enable deleting the cab files after installation.i changed the registry HKLM/Software/Apps/Microsoft Application Installer to 2.but it still doesn't delete them!!plz help me.
hamed_ppc said:
hi,but i have the same problem and i cant enable deleting the cab files after installation.i changed the registry HKLM/Software/Apps/Microsoft Application Installer to 2.but it still doesn't delete them!!plz help me.
Click to expand...
Click to collapse
anybody dont know how i can solve this problem?i want cab files will be deleted after installation
hamed_ppc said:
anybody dont know how i can solve this problem?i want cab files will be deleted after installation
Click to expand...
Click to collapse
To enable or disable deleting CAB files after installing:
HKCR/cabfile/Shell/Open/Command/
default = \Windows\wceload.exe "%1"
\Windows\wceload.exe "%1" /nodelete
newbie2 said:
To enable or disable deleting CAB files after installing:
HKCR/cabfile/Shell/Open/Command/
default = \Windows\wceload.exe "%1"
\Windows\wceload.exe "%1" /nodelete
Click to expand...
Click to collapse
thanks a lot
papamopps said:
Thats why I prefer to extract the cab out of the C:\Programs\Activesync.
Click to expand...
Click to collapse
you have made my day! i never knew you could do that. i always had to look for cab versions untill now
papamopps said:
Thats why I prefer to extract the cab out of the C:\Programs\Activesync and copy them to SDcard. Pro: you have all needed programs on SDcard and do not have to install throu activesync.
Click to expand...
Click to collapse
Also if you make the files readonly you don't need to worry about making the registry change to stop them being deleted after installation.
bbobeckyj said:
you have made my day! i never knew you could do that. i always had to look for cab versions untill now
Click to expand...
Click to collapse
Thanks! I found it just one day when I had trouble with active sync.
I have completed a OEM Package for HTC WMP Today Plug-in. Just put it in the OEM folder in cooking. Have yet to figure out how to put in .CAB format PLEASE HELP!!!
can you made a cab file for this plz i dont know how can i cook my rom
Any reason there are two .RGU files, each with the same entries? The same with the .DSM files, however one has a carriage return, the other is empty?
Andy
this doesnt work in the kitchen..
Cool, Been waiting for someone to get this. Seen it on all the new wm6 updates released officially. Hope someone can get this into a cab
ANTC said:
this doesnt work in the kitchen..
Click to expand...
Click to collapse
Delete the two files:
Code:
5c302504-0686-11dc-8314-0800200c9a66.rgu
5c302504-0686-11dc-8314-0800200c9a66.dsm
And the build the ROM, this worked for me.
Andy
ADB100 said:
Delete the two files:
Code:
5c302504-0686-11dc-8314-0800200c9a66.rgu
5c302504-0686-11dc-8314-0800200c9a66.dsm
And the build the ROM, this worked for me.
Andy
Click to expand...
Click to collapse
IS there anyway of just getting this into a cab install file. I really dont want to try to build a ROM and istall all my programs again
ADB100 said:
Delete the two files:
Code:
5c302504-0686-11dc-8314-0800200c9a66.rgu
5c302504-0686-11dc-8314-0800200c9a66.dsm
And the build the ROM, this worked for me.
Andy
Click to expand...
Click to collapse
oh man It worked thanks...wait till me newest release its perfect beside minor details im trying to fix
Anyone have a Today PlugIn for HTC's Audio Manager?
Here is the cab.
Removed the option.xml, the dsm and the rgu files.
Imported the registery settings from the rgu to the cab file.
All the other files reside in the windows folder.
Untested though, but should work
[edit]
see my post here for the working version.
the-equinoxe,
NOpe, didnt work for me, it says, The program or setting cannot be installed because it is not digitally signed with a trusted certificate.
thx man
thx now testing on pandora´s rom
will sign the files and remake the cab, standby for the update ..
error instaling "the setup was unssesfull" any ideas why??
g4 cid locked
2 gigs mini sd
ipl/spl 2.26.0001
rom 4.0.0.0 WWE
radio 2.47.11
protocol 4.1.13.24
ext rom faria v5.0
even with signed dll's it is unsuccessfull in installing..
I am missing something here..
WmpPluginToday.dll is the culprit, it doesn't allow to be installed by cab (signed or not.).
FIXED see my post below
well it installed for me butIt's nowhere to be found. ROFL any ideas?
success !!
Just installed my newer version, and it works (after reset of course)
Had to change the "self registering" and the "shared file" flag..
Working version attached.
Nope, it's still saying the same thing to me Equinoxe.
check the first page for the fix.
Madcap180 said:
Nope, it's still saying the same thing to me Equinoxe.
Click to expand...
Click to collapse
If you have downloaded the new version, and still get an untrusted error, you should install the following certificate.
unzip, copy to ppc and double click on certificate (on ppc not pc!!)..
Hi everybody? I am trying to find a solution to a issue with sasimi on the new 6.5.X roms (with the start button on the lower bar). The issue is that sashimi cant install cabs to storage card. I searched the web and foud some ideas that u need to hack the sashimi.mrsc file but none of them was working.
Can anybody who succeeded in runing sashimi post his workoround? That would really help me. Thanks ion advance.
Nobody here uses sashimi?
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Man, I love you, thanks.
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
dagrim1 said:
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
Click to expand...
Click to collapse
no it will not working with 6.5, first backup SASHIMI.mscr original first for using later with 6.5
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
steveianson said:
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
Click to expand...
Click to collapse
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I'm so glad that it works again...
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Me too
It seems that the "SendSpecial ("Down")" is not working and the script may be hanging on the command, or something like that. You don't see the selection change, so it could also be the "SendSpecial("Space")" not working. Either way, the "SendSpecial("LeftSoft")" just after is obviously not firing. Not sure why it's different now, but it apparently is. There used to be a "SendSpecial("CR")" instead of the "SendSpecial("Space")", so I'll try that to see if it's working again (worked in win6.1, not in win6.5). Mine's been working just fine, up till the very latest Energy ROM on my CDMA TP2.
LightC said:
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Click to expand...
Click to collapse
I think it connected to the roms u are using. For me it worked with one rom, then I flashed other rom and I experencied the same thing as you.
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
secoseco said:
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
Click to expand...
Click to collapse
dingolino said:
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
Click to expand...
Click to collapse
You're right there off course
I am having no luck with the v8.0 of Sashimi. I have the Artemis ROM (WinMo v. 6.5.5).
Auto mode only installs cabs from cab/ASL folder. I replaced the Sashimi.mscr with the one posted in this thread but to no avail.
Do you guys have any suggestions?
me too,
sashimi doesnt install (not works) for new artemis v7. It install all my cabs from auto/SC to device becasue it can not move cursore down anymore..
any suggestions?
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
I'm surprised that either of the attachments on this thread works on HD2 Leo. I found that there is a very basic problem with mortscript and all sashimi scripts will hang. Two symptoms:
1) if not in flight mode, sometimes hangs during initialisation
2) if auto install to storage card, will hang (leaving you to select the radio button and press install)
and there is no easy cure.
padlad said:
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
Click to expand...
Click to collapse
thx m8,
i will try it
i'm on wm 6.5.x and sashimi stalls at SASHIMI INITIALIZATION COMPLETE.... HEEEEELP!
The HTC Flashlight app isn't bad. It looks fancy at least, and I see it's included in many ROMs, so it must do something better than TorchButton (my other baby).
Anyway, when you start HTC Flashlight, you get that annoying demo you have to wait for before you can use the app. Well, it's annoying to me at least.
Attached in the .zip is a fixed .exe in which the demo is skipped. The rest works like it does normally (light is turned on immediately at the middle setting). Just replace the original .exe with this one. If it's cooked into the ROM, you may not be able to overwrite it. Just put it somewhere else and make a shortcut then.
Btw, you can recognize if you use the modded .exe if you see FlashLight as title, instead of Flashlight (note the capital L).
Have fun.
Update march 7th
The original app can be downloaded from this thread, first post: [CAB] HTC Flashlight
(so after that, overwrite the exe with this one)
Update march 8th
Updated the attached .zip with a signed version of the executable, which prevents problems to run the fixed exe on stock roms and a number of custom roms.
aho77 made an updated cab wish signed version to install the whole thing, can be downloaded from this post: http://forum.xda-developers.com/showthread.php?p=5817414#post5817414
Also attached is the certificate used to sign the executable. You shouldn't have to install this, but I provided it just in case.
Wow... this is PERFECT!!!! Dankje man!!!
Thanks NetRipper, another annoyance gone...
Thanks!
Hey thanks m8 awesome no annoying demo ^^
when trying to run it says:
the file cannot be trusted, either it is not signed with a truseted certificate or one of its components cannot be found
mmmalas said:
when trying to run it says:
the file cannot be trusted, either it is not signed with a truseted certificate or one of its components cannot be found
Click to expand...
Click to collapse
yes! me 2.....
Can you post a cab file?
mmmalas said:
when trying to run it says:
the file cannot be trusted, either it is not signed with a truseted certificate or one of its components cannot be found
Click to expand...
Click to collapse
You can ignore that message. Just click 'yes' to continue. (You get that message because the .exe was modified, and that's correct.)
If you want to get rid of that message forever, run this cab:
http://www.netripper.com/raphael/Default_Signed_DisableSecurity.CAB
mjemec said:
Can you post a cab file?
Click to expand...
Click to collapse
Not much point in that I think. This is just a hack for an existing app. You replace the .exe with this one. If I were to cab this, I'd have to provide the full app. I think there's like 3 dlls besides the exe normally.
[edit]
Here's you can download the original cab from, I'll add that to first post too: [CAB] HTC Flashlight (after installing that, overwrite with exe in first post)
Strange...I can't get it to run too.
I get the same error message (cannot be opened, not signed with trusted cert, component missing.) Installed the cab you provided, reset, but still the same msg. Running as standalone or copied to windows folder, same result. On official ROM 1.66 WWE.
NetRipper said:
You can ignore that message. Just click 'yes' to continue. (You get that message because the .exe was modified, and that's correct.)
If you want to get rid of that message forever, run this cab:
http://www.netripper.com/raphael/Default_Signed_DisableSecurity.CAB
Click to expand...
Click to collapse
That message always appears and I am never given the option to run the exe. it always quit. installing the cab to disable the security message didn't make any difference. I wonder if it is because of my stock 1.66 ROM Asia or Resco explorer to unzip the file.
Please help.
Thanks,
Kurni
The mod should be great, but doesn't work for me neither.
I have the same problem as a above... there isn't such a option as a "YES" to continue it closed also i have installed the cab but no luck ... any idea?
Ahhh...fantastic, thanks for this!
Wondered when someone would fix this
Nice,
I will try it now.
alex fung said:
The mod should be great, but doesn't work for me neither.
Click to expand...
Click to collapse
miroalex said:
I have the same problem as a above... there isn't such a option as a "YES" to continue it closed also i have installed the cab but no luck ... any idea?
Click to expand...
Click to collapse
Kurni said:
That message always appears and I am never given the option to run the exe. it always quit. installing the cab to disable the security message didn't make any difference. I wonder if it is because of my stock 1.66 ROM Asia or Resco explorer to unzip the file.
Click to expand...
Click to collapse
I don't know why it's not working for you guys. Two of you reported to be using stock rom's. I've only tested this on energyrom which has htc flashlight cooked in. Maybe that's the problem.
Did the original htc flashlight app work for you guys before you tried using the patched one?
And just a short in the dark, try installing this cab with developer certificates (might need soft reset afterwards):
http://www.netripper.com/raphael/SdkCerts.cab
do I have to install this exe by itself,
or should it go where the original app was installed?
this could be the reason
Well, you overwrite the original exe with this one, or you at least place it in the same dir with a different name.
same issue here using miri 6.5 v5.0 which has flashlight cooked in.
NetRipper said:
I don't know why it's not working for you guys. Two of you reported to be using stock rom's. I've only tested this on energyrom which has htc flashlight cooked in. Maybe that's the problem.
Did the original htc flashlight app work for you guys before you tried using the patched one?
And just a short in the dark, try installing this cab with developer certificates (might need soft reset afterwards):
http://www.netripper.com/raphael/SdkCerts.cab
Click to expand...
Click to collapse
The original one works, but the patched exe doesn't.
On stock 1.66 asia WWE rom...wonder what's the problem.
And the original exe is in the Windows directory, replace or renamed gives the same problem.