Hi All,
I upgrade my Himalaya to WM5 2.3a64.
Then I wanted to change to 2.3a32 but soprise, after the upgrade all the data on my PDA remain and it is not clean.
How can I upgrade to a clean install like a new PDA?
Even Downgrade to WM3 didn't wipe the data!
to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
10'X
Related
Hima_DOC_Tool_1.0.exe will:
- reformat your Disk-On-Chip.
This change IS reversible with:
Hima_DOC_Restore_1.0.exe
This operation is SAFE. It will not destroy your device.
You will get:
- Storage partition 31MB
The main purpose of this tool was to get more storage space under WM2005,
but it can also be used on WM2003/SE.
HOW TO RUN IT
-------------------------------------------------------------------------
(it can be run on WM2003 or WM2005 as well)
1. Install ExtendedROM Unlocker.
2. UNHIDE and UNLOCK your ExtendedROM.
3. Run the Hima_DOC_Tool_1.0.exe on your device.
4. Hardreset your device
HOW TO RESTORE ORIGINAL DOC chip SIZE
-------------------------------------------------------------------------
1. Install ExtendedROM Unlocker.
2. UNHIDE and UNLOCK your ExtendedROM.
3. Run the Hima_DOC_Restore_1.0.exe on your device.
4. Hardreset your device
HOW TO HARD RESET
--------------------------------------------------------------------------
Press reset hole and keep holding camera + record button until menu "Boot Options" appears on the screen.
Then release cam + rec and use them for moving across the menu and to change the values.
To hardreset tou have to select:
Enable KITL = NO
Clean Reg Hive = YES
Format Storage = YES
THAT's IT FOR NOW
buzz net
after i installed wm5 in my xda2,i tried to perform hard reset which is juz press the power button + the soft reset button.
after tat,it til not be hard reseted...y?
what is Enable KITL when i succesfully enter the menu to format??
try RESET BUTTON+CAM BUTTON+REC BUTTON...
after you see menu, chose
Enable KITL = NO
Clear Reg Hive = YES
Format Storage = YES
and press D-PAD
thx..i will try later...
Hello,
I have bought an Omnia and it is in SWEDISH. There is a manual in Samsung Omnia which guides you to change the language in English.
Instructions are as follows:
If you have the microSDTM memory card supplied with your device, go to step 1. If you do not have the microSD memory card supplied with your device, go to step 6.
1. Press and hold to turn your device off (if necessary).
2. Insert the supplied memory card.
3. Press and hold to turn your device on. The multi-language installation program runs automatically.
4. Tap Install.
5. Wait until the installtaion files are copied to the device.
6. From the Today screen, tap Start → Settings → System tab and select .
7. Tap an MLI file and Select.
8. Read the instructions and tap Change language.
9. Enter 1234 and tap Yes. The device restarts automatically.
10. When the language selection window appears, scroll to a language by pressing
or .
11. Press to select the language.
12. Press to select the Yes check box.
13. Press to tap Next.
The firmware is installed and the device restarts automatically.
The problem is after step 9, nothing happens. I called Samsung support and they send me an updates .MLI file, but it didn't work for me as well.
Any Ideas?
Try hard reset
http://www.pspmyspace.com/omnia/2008/09/how-to-hard-res.html
Ok, I'll try to do that, but any one experienced the same problem ? or any other solution ?
defcomg said:
Try hard reset
http://www.pspmyspace.com/omnia/2008/09/how-to-hard-res.html
Click to expand...
Click to collapse
Hard Reset didn't helped.
I have a T-Mobile HTC Hero. One thing I did, was reinstall the operating system, by downloading an updated OS from the T-Mobile website, and installed it using HTC Sync.
According to HTC Sync, this wipes everything on the phone and installs the new OS..
But is this actually the case? Does this really completely wipe the phone before installing it?
What I am looking to do... is completely wipe the phone, and then install the new OS. If I've already done that, good. If I haven't, I need to.
If you go to Settings and do a factory reset, that only resets user settings and removes applications. It doesn't wipe the OS and everything on the phone. As said, I need to do all of that, and the install the new OS.
You can either:
1) To initiate the Android device wipe process, first tap your Android Menu key to bring up a number of on-screen options.
2) Next, choose the Settings option within the on-screen menu, and on the following screen scroll down to and tap Privacy.
3) Within the Privacy Settings menu, tap the Factory Data Reset option, and on the following screen choose whether you want to wipe all data on your device, all data on your external microSD memory card or both, by filling in the appropriate check boxes. Then confirm the action by tapping Reset Phone.
4) You'll be prompted one more time to confirm your Android device wipe on the Factory Data Reset screen, and if you're sure you're ready to erase your device, tap the Erase Everything button to complete the process.
or to delete the data from your phone and to install a ROM:
http://www.youtube.com/watch?v=gIyYHfb1Afg
Reboot phone and then:
1. Press down button and Power button together.
2. Use the volume down button to select recovery then press the power button.
3. Okay use the volume down button and go to advanced three times.
4. Press the power button and use the trackpad to select.
5. Wipe/factory reset and then select yes.
6. Wipe cache
7. Select advance
8. Wipe dalvic cache
9. Select install from sd card then select the ROM you wish to install.
NB: I am not responsible for any data lost on your phone for the above.
WARNING: This method will erase your internal data and your current ROM since you are installing a custom ROMM so this method should be fine : )
A. Go to recovery mode, shown below for various devices
Firstly shutdown/boot your android device then perform the below combination until boot logo shows up
IF YOU JUST NEED TO EXIT THIS MODE ASAP KEEP PRESSING POWER KEY TILL THE LOGO APPEARS
NOTE: Also in this mode touch screen may not work, it's the default, Volume buttons are used to navigate and power button to select, you may need to select the recovery mode.
-> Samsung | at the same time press and hold these buttons: Home, Volume up, Power
-> Redmi | at the same time press and hold these buttons: Power and Volume Up
-> Realme | at the same time press and hold these buttons: Power and Volume Up
-> Micromax | at the same time press and hold these buttons: Power and Volume Up
-> Motorola | at the same time press and hold these buttons: Power and Volume down
-> One Plus | at the same time press and hold these buttons: Power and Volume down
-> Vivo | at the same time press and hold these buttons: Power and Volume down
-> Oppo | at the same time press and hold these buttons: Power and Volume down
-> Pixel | at the same time press and hold these buttons: Power and Volume down then release vol down when the logo appears then at the same time click vol up once and now release both the buttons
B. Goto wipe-> Advanced wipe
a. Select dalvik+data+internal storage+cache+system( you are deleting your current rom )
b. Then swipe to wipe
c. If you get the error message then
i. Go back to Advanced Wipe & select data+system
ii. select repair file system, if error still occurs then goto iii
iii. Change File System-> exFAT-> swipe to select then repeat steps i & ii-> Change
File System-> EXT4-> swipe to select
d. After the above goto home in TWRP-> Reboot-> Recovery
C. If It's still alive then goto Wipe-> Format Data, this will just reset the phone. Then Wipe Dalvik cache before flashing.
D. Keep the custom ROM & Magisk(or any other of ur choice) in an ext SD card, after the above steps just flash Magisk to root your phone before flashing the ROM.
CREDITS: Youtube-> TechBoy Mrrajsingh111