Database Info

[Folio 100] Keys to know and force reboot pinhole

Hello,
I'm lost into key ordering to put the folio 100 into different modes/stats...
Do i write synthesis, Can someone confirm this ?
(I probably found an interseting toshiba doc for locked/bricked folio to force reboot folio 100...)
MODES :
* Normal mode
This il the default starting mode, when you power folio100 running the OS.
* Recovery mode
This is the mode where you can reset the folio 100 default settings, and you can upgrade the ROM with new one automatically
(http://aps2.toshiba-tro.de/kb0/OPT0C032V0000R01.htm)
* Bootloader mode
With this mode you can propably use nvflash to collect and push data over folio100
or exemple to dump all partitions datas, etc...
ACCESS :
Power + VolumeUp : Recovery Mode access
Power + VolumeUp >> VolumeDown : (Cancel) Start OS
Power + VolumeUp >> VolumeUp : Recovery Mode menu
Power + VolumeUp >> VolumeUp > VolumeUp : Factory Reset menu
Power + VolumeUp >> VolumeUp > VolumeDown : System Update menu
Power + VolumeUp >> VolumeUp > VolumeDown > VolumeUp : System Update confirmation
4 x Power + VolumeDown >> Bootloader mode
5 x Power + VolumeDown >> BE CAREFULL : This seem to Lock/brick definitivelly the Folio (Firmware seem to go into a deadloop....)
But I dont' know if it's the solution, but you can apparently force Folio100 to reboot probably out of the deadloop firmware with the "force reboot pinhole"
(http://aps2.toshiba-tro.de/kb0/OPT0C032F0000R01.htm). I dont try this, I don't know if it's work, i hope Dexter_nlb do this try with hes bricked Folio 100
(seen here http://forum.xda-developers.com/showthread.php?t=831086)
Thanks to confirm me
Molux
PS: sorry for my bad english

Autoresponding...
Hello,
Hum...(<-- embarrased) I just undertand that back black platic panel it's very very easy to remove (unlike iphone & co, for exemple) to access to battery, etc...
So i think most of you found the "reset pinhole" a long time ago...
Dexter send me a message to clearly say that "Reset pinhole" DONT leave the "deadloop".
Actually there is NO SOLUTION to leave this deadlocked stat
Molux

Help pls Error Message: E:Can't mount /dev/block/mmcblk3p2:

I made the whole process, but has more than 10 minutes in the second screen gtablet help please: S
1.) Error Message: E:Can't mount /dev/block/mmcblk3p2: :
Resolution: the SD card has become corrupt. Please follow these steps to correct the issue:
1.) Turn the tablet off if not off already.
2.) Press and HOLD the power power button and rapidly press the VOLUME UP button (whille holding the power button without letting go). The tablet should enter recovery mode.
3.) User the volume buttons to scroll to Advanced, then press HOME to select.
4.) User the volume buttons to scroll to Partition SD Card , then press HOME to select.
5.) User the volume buttons to scroll to 2048, then press HOME to select.
6.) User the volume buttons to scroll to 0, then press HOME to select.
7.) Press Home to Reboot Recovery
8.) Press Home to Reboot System Now
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
EDIT Solved, i use nvflash and restore system, thanks anyway*-*
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

[Q] Forgot Password pattern of Moto g 4.4.2 without setting up of gmail id

Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?

vids107 said:
Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?
Click to expand...
Click to collapse
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile

Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.

DarkDarth said:
Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.
Click to expand...
Click to collapse
read well and try it
Steps On Bypassing or Unlocking
Pattern Lock or Password on Android
Devices Without Losing Data
Now, before you take any action on
your device, make sure you know it well
Requirement For a Successfully
Operation
1. Aroma File Manager 1.80 which
you can download from https://code.google.com/p/rom-cmexmini/downloads/detail?name=aromafm-1.80.zip&can=2&q=
2. Your Locked android device
either locked by pattern lock or
password
3. A Memory card( the memory
card of the android device)
You will be surprised that we don’t
need a computer, that the awesome
thing about this method of unlocking
password and pattern locks.
To the main business proper, how to
unlock the pattern lock or password,
please follow the steps
Step 1
Once you have download the Aroma
file manager , move it to the memory
card and insert the memory card to
the android device
Step 2
Open your stock recovery and
different device has there own way of
entering stock recovery, so I advise
you Google it out along with your
android device name. Once you have
it, enter into stock recovery which is
a black interface
Step 3
once you are there, use your volume
+ and volume – to scroll up and
down and use the middle button to
select
Step 4
Now Mount and storage>> Mount
Everything>> Mount System>> Mount
data>>Mount afs>>Mount
Preload>>Mount SDcard>> Mount
ExternalSD>> go back>> Install zip
from SDcard>>Choose zip from
external SDcard
Step 5
The find the Aroma File manager you
download into the sdcard and select
and select “Yes Install Aroma file
manager” then it will load and the
file manager will open in the recovery
mode
Step 6
In the aroma file manager, go to
Settings and Go to bottom n select
“Automount all device on start ”
which is the second to last option
and then exit from aroma file manger.
Step 7
perform step 5 again and the Aroma
file manager will update and open
again
Step 8
go to the Data Folder>>>then System
folder and find the gesture.key if it is
password lock that locked your
phone or password.key if it was a
password lock and press the file for
long and the option to delete the file
will pop up and delete it
Step 9
Exit the aroma file manager and
restart to the normal interface and
when the device has finished restart
you will still find the pattern lock or
password there but you are to use
any pattern lock or password and it
will accept and your device is
unlocked but note the pattern you
use and password.

anandrd said:
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile
Click to expand...
Click to collapse
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
---------- Post added at 11:47 PM ---------- Previous post was at 10:51 PM ----------
I finally was able to get rid of the screen lock pin by using this info:
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence

Moto g4 plus not accepting Gmail address used to sync device
I managed to factory reset my Moto g4 plus phone...but after rebooting the phone and trying to set up the phone again, it did not accept the Gmail address which I had used to sync the device earlier...is there any way to bypass this requirement so that I can start using the phone again ?

[ROOT/CWM] Samsung Galaxy Star Pro/Plus

This is a Clear guide to Root your Device.
**note: this will also fix your device if it is stuck in white screen.
First download the file attached below before proceeding into the steps/guide.
**(if you didn't have Samsung USB Driver you can search it on google )
1. Extract the "ROOT - RECOVERY FIX GT-S7262.zip".
2. Place "UPDATE-SuperSU-v2.16.zip" to your SD Card.
3. Open Odin3 v3.07.
4. Click "PDA" then choose recovery.tar.
5. Power off your device and go to download mode (power button + menu + volume down) then press volume up to continue.
6. Connect the USB to your phone.
7. Uncheck the "Auto Reboot" option.
8. Press start. It should be showing "Reset" or "Pass" if it is Done
9. Long press the Power Button to shutdown.
10. Go to Recovery mode (power button + menu + volume up)
11. Choose "Install zip from sdcard" (press power button to confirm)
12. Then " Choose zip from sdcard"
13. Then find where you placed in your sdcard the "UPDATE-SuperSU-v2.16.zip"
14. Then choose " -Yes"
15. Then go back and choose "reboot system now"
Tadaaaa~ ! your Device is now rooted
IF IT STILL WHITESCREEN THEN DO THIS :
*First you need empty SDcard, just put "UPDATE-SuperSU-v2.16.zip" in your SDcard
*Then boot to recovery( power + volume up + home, relase home when you see samsung)
*Then the phone will boot in white screen
*After getting white screen just wait for 15 sec letting CWM to load
*Now you are in main screen of cwm but you can not see it.
*Then Do this following steps.
1. press volume down
2. press power twice
3. Press volume up twice
4. Press power
5. Press volume down 7 times
6. Press power
7. Wait a minute and press back button a few times and press power button to reboot.
**Hit Thanks if i helped you
**Sorry for my bad english

[Completed] [Xposed][framework+modules][4.3.x +] Lollipop Status Indicator (or MIUI V7)

Xposed​
Notes : This is Xposed Framework + Modules. Please take a Backup of ur ROM if in case going to "soft-brick" ur device.
Pre-Requesites​
Root access (# or superuser/supersu)
It is important to perform this to access the application to system partition to modify sensitive files.
BusyBox ( Stericsson/JRummy)
It is also recommended to install this after rooting ur device to be able the root access work properly and enable all features.
Custom Recovery (TWRP/CWM (official/unofficial) )
This is also recommended to install this after rooting and busybox installation. You need this to flash zip files (flashable zip file to device) and installing or updating ROM.
Installation​Step 1 : Install the zip through recovery. Not in normal Mode. To open recovery, Turn off your phone and after vibrates, Press and hold Vol- and Power button. On some devices, Vol+ and Power button On any other devices Vol+ + HomeButton +Power. (Samsung Devices) On any other devices While the phone is needed to turn on and while in home screen press and hold Power button + Volume- + Volume + ( Do IT Quickly) (Nexus Devices) and for Other Sony devices Power button and while in SONY Logo, a couple of Press Volume- and will enter into recovery mode. If you see that there's 'enter recovery', press power button.
Step 2 : (CWM RECOVERY) Press volume- and volume+ to scroll the highlight and power button is select. If you're using an old recovery, follow this. install zip --> apply update from sdcard /external sd or storage/sdcard0 or storage/sdcard1 and select the zip file. move the highlight to install "blahblahblahxyz.zip'' and reboot your phone.
Step 2. 1 : TWRP RECOVERY if u use touch version, go to install --> and select the directory under sdcard foler and swipe the arrow to flash and reboot your phone.
Step 3 : When your phone is booted up, it will install the Xposed installer , Flat style Indicator and Flat Style Colored Bar . Open the Xposed Installer and go to Framework , tick Install/Update and Press back button 2x . And go to Modules , tick checkbox the Flat Style Colored Bar and Flat Style Indicator.
Reboot​
After reboot If bootloop presents, go to recovery and restore your back up ROM. :laugh: I have some screenshots.
Take note that the SystemUI in notification shade doesn't change and it will not replace SystemUI.apk
THUMBS UP and HIT THANKS.,.​ :good: :good:

XDA Assist is not the place for this.
Thread closed.