[ROOT/CWM] Samsung Galaxy Star Pro/Plus - Android General

This is a Clear guide to Root your Device.
**note: this will also fix your device if it is stuck in white screen.
First download the file attached below before proceeding into the steps/guide.
**(if you didn't have Samsung USB Driver you can search it on google )
1. Extract the "ROOT - RECOVERY FIX GT-S7262.zip".
2. Place "UPDATE-SuperSU-v2.16.zip" to your SD Card.
3. Open Odin3 v3.07.
4. Click "PDA" then choose recovery.tar.
5. Power off your device and go to download mode (power button + menu + volume down) then press volume up to continue.
6. Connect the USB to your phone.
7. Uncheck the "Auto Reboot" option.
8. Press start. It should be showing "Reset" or "Pass" if it is Done
9. Long press the Power Button to shutdown.
10. Go to Recovery mode (power button + menu + volume up)
11. Choose "Install zip from sdcard" (press power button to confirm)
12. Then " Choose zip from sdcard"
13. Then find where you placed in your sdcard the "UPDATE-SuperSU-v2.16.zip"
14. Then choose " -Yes"
15. Then go back and choose "reboot system now"
Tadaaaa~ ! your Device is now rooted
IF IT STILL WHITESCREEN THEN DO THIS :
*First you need empty SDcard, just put "UPDATE-SuperSU-v2.16.zip" in your SDcard
*Then boot to recovery( power + volume up + home, relase home when you see samsung)
*Then the phone will boot in white screen
*After getting white screen just wait for 15 sec letting CWM to load
*Now you are in main screen of cwm but you can not see it.
*Then Do this following steps.
1. press volume down
2. press power twice
3. Press volume up twice
4. Press power
5. Press volume down 7 times
6. Press power
7. Wait a minute and press back button a few times and press power button to reboot.
**Hit Thanks if i helped you
**Sorry for my bad english

Related

Help pls Error Message: E:Can't mount /dev/block/mmcblk3p2:

I made the whole process, but has more than 10 minutes in the second screen gtablet help please: S
1.) Error Message: E:Can't mount /dev/block/mmcblk3p2: :
Resolution: the SD card has become corrupt. Please follow these steps to correct the issue:
1.) Turn the tablet off if not off already.
2.) Press and HOLD the power power button and rapidly press the VOLUME UP button (whille holding the power button without letting go). The tablet should enter recovery mode.
3.) User the volume buttons to scroll to Advanced, then press HOME to select.
4.) User the volume buttons to scroll to Partition SD Card , then press HOME to select.
5.) User the volume buttons to scroll to 2048, then press HOME to select.
6.) User the volume buttons to scroll to 0, then press HOME to select.
7.) Press Home to Reboot Recovery
8.) Press Home to Reboot System Now
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
EDIT Solved, i use nvflash and restore system, thanks anyway*-*
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

Unbrick Phone & Fixing Rom Firmware

Brief: Back up All - Contacts (remove sim card)
-------------------------------------------------------------------------
Boot into Recovery Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'Home button' and press 'Power-on' (keys of you phone model to get you into recovery)
4. Keep holding down the 'Home button' or ‘key of you phone model to get you into recovery’ until the cyanogenmod recovery menu pops up (it takes a while.)
Wipe Data/Factory Reset
1. Press the 'volume' down to 'Wipe Data/Factory Reset'
2. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Menu will come back up...
Select 'reboot system now'
-------------------------------------------------------------------------
Now start write-up below
First Install Driver on PC:
'LGAndroidDriver_WHQL_ML_Ver_1.0_All_Win7' (works on all windows)
To install by ‘Double click’ on driver download (Xp may require a similar driver search mediafire.com)
Download Android Version Flash Recovery to PC/Laptop ‘extract’ to PC
1. Via PC/Laptop USB ‘add the update.zip (this may be called something else ‘Rename’ to ‘update.zip’ for your Version Rom firmware) to Main directory of SD Card
To Manually Access SD Card
1. Boot into "Recovery'
2. Using 'Volume button' scroll down to 'mounts and storage' select
3. Using 'Volume button' scroll down to 'mount /sdcard'
4. Using 'Volume button' scroll down to 'mount USB Storage' select
DON'T PRESS 'UNMOUNT' just stay in that screen!
You now can access your SD Card from your PC/Laptop
5. Add update.zip to main directoy of SD Card
Now -
Hit your phones back button twice select 'power off'
Download this Link to PC: KDZ Updater Europe Open.zip 144mb
Put your phone into Download Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'volume down' and Hit 'Power-on' button
4. The screen should display 'Download mode'
5. Plug in 'USB'
Extract KDZ Updater Europe Open.zip to your PC/Laptop
1. Run 'kdz_fw_upd'
2. Choose '3gqct' as the 'Type'
3. Choose 'Diag' as the mode
4. Click 'File icon' and select 'Europe Open+Fastboot.kdz'
then hit ‘Launch Software Update’
------------------------------------------------------------------------------
If you find your USB Locks on 'Launch Software Upate'
1. Boot into "Recovery'
2. Using 'Volume button' scroll down to 'mounts and storage' select
3. Using 'Volume button' scroll down to 'mount /sdcard'
4. Using 'Volume button' scroll down to 'mount USB Storage' select
DON'T PRESS 'UNMOUNT' just stay in that screen!
While sitting there....
1. Run 'kdz_fw_upd' from PC/Laptop
2. Choose '3gqct' as the 'Type'
3. Choose 'Diag' as the mode
4. Click 'File icon' and select 'Europe Open+Fastboot.kdz'
then hit ‘Launch Software Update’
------------------------------------------------------------------------------
Now make a flash recovery.bat file for ‘Recovery Image’
1. Open notepad ‘add’ below in it and change ‘img’ to what every img you using….
adb reboot bootloader
fastboot flash recovery recovery_clockwork_3.0.1.9_swift.img
fastboot reboot
3. Save Notepad as ‘flash recovery.bat’
4. Open 'CMD' within folder with ‘Usb connected’ to phone
5. Type ‘flash recovery’ Hit ‘Enter’ key
As soon as phone reboots hold the buttons down to put your phone model into ‘recovery mode’ (search ‘fastboot recovery mode’ for your ‘phone model’ buttons)
NOTE BELOW BUTTONS MAY VERY BETWEEN PHONE MODELS
Now to install the Rom
1. Press the 'volume' down until 'install zip from sdcard' is selected
2. Then press the 'camera button'
3. Then press the 'camera button' on 'apply /sdcard/update.zip'
4. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Done..
Menu will come back up...
Hit your 'Back button' and select 'reboot system now'
by Stryker’s Lounge AUS

please help me :( #reboot#

my problem is
a rooted my samsung galaxy tab 10.1
i did all of this steps carfully
Root Samsung Galaxy Tab 10.1 4G (GT-P7500r) for 4G version
Step #1: Download the karnerl file and download the recovery file to PC, please don’t modify it
Step #2: Plug the device to PC and copy downloaded files tablet.
Step #3: Turn the device off and reboot tablet into recovery mode:
At the same time hold down the Volume Down and the Power keys on your tablet.
When you see two icons appear on the screen, stop pressing the above mentioned keys. You can use the Volume Down key to navigate between these icons.
Select the icon on the left side (box). Press the volume UP key to select it. You will now boot into Recovery mode.
Step #4: Select “Install zip from sdcard, then “Choose zip from sdcard” and select “kernel.zip” to install, after that install recovery zip too in same manner.
Step #5: Return to main menu and select “Reboot now” and you are done. That’s it enjoy!
when i was in step 5 i returned to main menu and selected "reboot now".
after that the screen have been black with a light
i tried to turn it on i saw the samsung welcome.
then its been black and the tab turned off,
when i tried to press power and volume as the same issue when i turned on like when u unplug the tv or other machine
and when i plug it to the pc and press and hold power and volume
i listen a new device sound and when i look to the device manger
its appears "adx"!!!!!!!
i dont know that to do please help me to repair that !
and thank you

[Completed] [Xposed][framework+modules][4.3.x +] Lollipop Status Indicator (or MIUI V7)

Xposed​
Notes : This is Xposed Framework + Modules. Please take a Backup of ur ROM if in case going to "soft-brick" ur device.
Pre-Requesites​
Root access (# or superuser/supersu)
It is important to perform this to access the application to system partition to modify sensitive files.
BusyBox ( Stericsson/JRummy)
It is also recommended to install this after rooting ur device to be able the root access work properly and enable all features.
Custom Recovery (TWRP/CWM (official/unofficial) )
This is also recommended to install this after rooting and busybox installation. You need this to flash zip files (flashable zip file to device) and installing or updating ROM.
Installation​Step 1 : Install the zip through recovery. Not in normal Mode. To open recovery, Turn off your phone and after vibrates, Press and hold Vol- and Power button. On some devices, Vol+ and Power button On any other devices Vol+ + HomeButton +Power. (Samsung Devices) On any other devices While the phone is needed to turn on and while in home screen press and hold Power button + Volume- + Volume + ( Do IT Quickly) (Nexus Devices) and for Other Sony devices Power button and while in SONY Logo, a couple of Press Volume- and will enter into recovery mode. If you see that there's 'enter recovery', press power button.
Step 2 : (CWM RECOVERY) Press volume- and volume+ to scroll the highlight and power button is select. If you're using an old recovery, follow this. install zip --> apply update from sdcard /external sd or storage/sdcard0 or storage/sdcard1 and select the zip file. move the highlight to install "blahblahblahxyz.zip'' and reboot your phone.
Step 2. 1 : TWRP RECOVERY if u use touch version, go to install --> and select the directory under sdcard foler and swipe the arrow to flash and reboot your phone.
Step 3 : When your phone is booted up, it will install the Xposed installer , Flat style Indicator and Flat Style Colored Bar . Open the Xposed Installer and go to Framework , tick Install/Update and Press back button 2x . And go to Modules , tick checkbox the Flat Style Colored Bar and Flat Style Indicator.
Reboot​
After reboot If bootloop presents, go to recovery and restore your back up ROM. :laugh: I have some screenshots.
Take note that the SystemUI in notification shade doesn't change and it will not replace SystemUI.apk
THUMBS UP and HIT THANKS.,.​ :good: :good:
XDA Assist is not the place for this.
Thread closed.

[Resolved] TWRP Error while flashing custom ROM- error opening / permission denied

WARNING: This method will erase your internal data and your current ROM since you are installing a custom ROMM so this method should be fine : )
A. Go to recovery mode, shown below for various devices
Firstly shutdown/boot your android device then perform the below combination until boot logo shows up
IF YOU JUST NEED TO EXIT THIS MODE ASAP KEEP PRESSING POWER KEY TILL THE LOGO APPEARS
NOTE: Also in this mode touch screen may not work, it's the default, Volume buttons are used to navigate and power button to select, you may need to select the recovery mode.
-> Samsung | at the same time press and hold these buttons: Home, Volume up, Power
-> Redmi | at the same time press and hold these buttons: Power and Volume Up
-> Realme | at the same time press and hold these buttons: Power and Volume Up
-> Micromax | at the same time press and hold these buttons: Power and Volume Up
-> Motorola | at the same time press and hold these buttons: Power and Volume down
-> One Plus | at the same time press and hold these buttons: Power and Volume down
-> Vivo | at the same time press and hold these buttons: Power and Volume down
-> Oppo | at the same time press and hold these buttons: Power and Volume down
-> Pixel | at the same time press and hold these buttons: Power and Volume down then release vol down when the logo appears then at the same time click vol up once and now release both the buttons
B. Goto wipe-> Advanced wipe
a. Select dalvik+data+internal storage+cache+system( you are deleting your current rom )
b. Then swipe to wipe
c. If you get the error message then
i. Go back to Advanced Wipe & select data+system
ii. select repair file system, if error still occurs then goto iii
iii. Change File System-> exFAT-> swipe to select then repeat steps i & ii-> Change
File System-> EXT4-> swipe to select
d. After the above goto home in TWRP-> Reboot-> Recovery
C. If It's still alive then goto Wipe-> Format Data, this will just reset the phone. Then Wipe Dalvik cache before flashing.
D. Keep the custom ROM & Magisk(or any other of ur choice) in an ext SD card, after the above steps just flash Magisk to root your phone before flashing the ROM.
CREDITS: Youtube-> TechBoy Mrrajsingh111

Categories

Resources