Database Info

[Recovery+Backup+Root] Walton Primo C1

Cautions:
1.your warranty is now void.
2.do this at your own risk.
3.read the whole post before starting.
Flashing CWM recovery and taking backup :
1. Download the package and extract all files.
2. Extract the driver.zip located in drivers folder->1
3. Install the driver.if your OS is 64bit then install the x64 one.if the OS is 32bit,then the x86 one.
4. Open researchdownload application
5. Select the 2nd button with double cog sign.
6. Now a new window will appear like the screenshot attached.
7. Right click on the file name field.choose the files located in "Required files" folder of the package.
be careful here.Put fdl1 in fdl1 field,fdl2 in 2nd field and the recovery image(extract the "CWM-recovery-SC8810-nonpadded.zip") in recovery field. Then press the "OK" button.
8. Press the Start (Play) button in ResearchDownload -application (third button).
9. Turn off the phone.
10. Keep holding the "- volume" key. Without releasing the button "- volume" plug the usb cable
11. The process of CWM- burning should be started now in ResearchDownload-application and it will take approximately 1 Minute.
I think you can release the Vol.Button, but I had kept it nevertheless.
12. Wait until the CWM-flashing has been finished (A green sign will appeare and "Passed" will be shown in ResearchDownload- application window).
13. Remove the battery, wait 20 seconds. Put battery back and turn on the phone.
14. now hold the vol (-) and power button until the screen flashes (40 seconds or less or more) and now you are in the CWM recovery menu.
15. PLEASE make a full backup by the "backup and restore" option .make sure there's about 500mb free space in your micro SD card.
16. after the backup reboot the phone and PLEASE store the backup files in somewhere else..(the whole ''clockworkmod'' folder)
congratulation. you have done a full backup and flashed your CWM recovery.
Rooting device:
*don't do this.if u find that your backup size is lower than 250mb~300mb(slight +/- may occur)
1. download and put the "superuserandfullbackup.zip" in your micro SD card
2. power off your device.
2. Reboot to Recovery by holding volume (-) and power button until the screen flashes and recovery menu comes.
3. just go to "install zip from sdcard option and select the zip "superuserandfullbackup.zip"
4. flash it
5. reboot.
Advices:
Rooting is dangerous.so first make a full backup of your unrooted stock Rom just after flashing CWM.
Store the backup(size will be around 250mb~300mb(+/- ) in someplace safe.it's the life of your phone.If anything goes wrong,it's the only key to fix your phone.......be careful.........
Getting back your warranty:
Restore your stock Rom's backup.Then,flash the stock recovery(included in the package.find it in RECOVERIES folder),in the same way you've flashed the CWM.
good luck.and thanks for reading this.

[BeginnerGuides] How to root Samsung Galaxy S Duos

Hello XDA,
I know there are lot of guides on how to root the Galaxy Note 2,but unfortunately I have not seen a guide that is clear enough to beginners that know nothing about Android. So, after hard work I have done a guide on how to root the Samsung Galaxy note 2 and put it in your hands.
Note:I Have Also Made A Picture Full Guide So, IF This Guide Wasn't Clear For You, You Can Go HERE
Introduction:
Today, I will guide you on how you can root Samsung Galaxy S Duos. This method is the easiest and the safest with NO triangle will appear on your boot. This method will flash (install) a custom recovery to gain root then after rooting we will flash back the stock recovery.
Disclaimer:
I’m not responsible if something goes wrong on your phone(Usually nothing goes wrong), you’re doing this on your own responsibility. Rooting your phone will void your warranty so don’t root your device unless you know what you are doing. To know more about rooting check What is rooting and it’s top 10 benefits.
The Method:
Requirements:
1- Download this zip file Galaxy S Duos S7562 (Rooting Kit).rar, thenextract it and you shall see these 5 files:
A)CWM-SuperSU-v0.96, put it in your phone external SD card.
B) Odin.zip,
C) CWM recovery
D) Stock_Recovey
E) Samsung USB drivers, install it.
2- Backup your device.Luckily, we have a post on how you can backup your
device here
Let’s Start:
Step1:
A- First of all,put your Galaxy S Duos in the download mode by holding the and then press the power button for 5 seconds then a warning screen will appear and you will have to press the volume up.
B- Extract Odin.zip and you will see 3 files, now click on “odin.exe”.
C- Now make sure only these boxes are checked ,then click on PDA and Choose CWM recovery.tar
D- Now remove the cover then click on start and wait until you see “Pass” above the “ID:COM”
table
Step2: After the phone shutdown completely (you can know that because the phone will vibrate when its completely off) remove the battery,then place it again.Now hold the Volume UP Button+ Home Button then press the Power Button for 5 seconds to boot to ClockWorkMod recovery. (To navigate throw the menus you can use the Home Button to select and the Volume Buttons to move up and down.)
Step3:
A- Now Choose the option “install zip from sdcard” then the option “choose zip from sdard” and now navigate to the file we moved earlier (CWM-SuperSU-v0.96.zip) and choose it by pressing the Home Button. You will have now to scroll to the option “Yes” by using the Volume Keys and then choosing it by pressing the Home Button
B-After the process finishes, you will have to go back to the main menu and choose the option “Reboot System Now”. Now your phone will restart and you should see SuperSu in your app drawer.

Reserved

works...:good:

[Q] Forgot Password pattern of Moto g 4.4.2 without setting up of gmail id

Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?

vids107 said:
Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?
Click to expand...
Click to collapse
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile

Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.

DarkDarth said:
Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.
Click to expand...
Click to collapse
read well and try it
Steps On Bypassing or Unlocking
Pattern Lock or Password on Android
Devices Without Losing Data
Now, before you take any action on
your device, make sure you know it well
Requirement For a Successfully
Operation
1. Aroma File Manager 1.80 which
you can download from https://code.google.com/p/rom-cmexmini/downloads/detail?name=aromafm-1.80.zip&can=2&q=
2. Your Locked android device
either locked by pattern lock or
password
3. A Memory card( the memory
card of the android device)
You will be surprised that we don’t
need a computer, that the awesome
thing about this method of unlocking
password and pattern locks.
To the main business proper, how to
unlock the pattern lock or password,
please follow the steps
Step 1
Once you have download the Aroma
file manager , move it to the memory
card and insert the memory card to
the android device
Step 2
Open your stock recovery and
different device has there own way of
entering stock recovery, so I advise
you Google it out along with your
android device name. Once you have
it, enter into stock recovery which is
a black interface
Step 3
once you are there, use your volume
+ and volume – to scroll up and
down and use the middle button to
select
Step 4
Now Mount and storage>> Mount
Everything>> Mount System>> Mount
data>>Mount afs>>Mount
Preload>>Mount SDcard>> Mount
ExternalSD>> go back>> Install zip
from SDcard>>Choose zip from
external SDcard
Step 5
The find the Aroma File manager you
download into the sdcard and select
and select “Yes Install Aroma file
manager” then it will load and the
file manager will open in the recovery
mode
Step 6
In the aroma file manager, go to
Settings and Go to bottom n select
“Automount all device on start ”
which is the second to last option
and then exit from aroma file manger.
Step 7
perform step 5 again and the Aroma
file manager will update and open
again
Step 8
go to the Data Folder>>>then System
folder and find the gesture.key if it is
password lock that locked your
phone or password.key if it was a
password lock and press the file for
long and the option to delete the file
will pop up and delete it
Step 9
Exit the aroma file manager and
restart to the normal interface and
when the device has finished restart
you will still find the pattern lock or
password there but you are to use
any pattern lock or password and it
will accept and your device is
unlocked but note the pattern you
use and password.

anandrd said:
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile
Click to expand...
Click to collapse
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
---------- Post added at 11:47 PM ---------- Previous post was at 10:51 PM ----------
I finally was able to get rid of the screen lock pin by using this info:
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence

Moto g4 plus not accepting Gmail address used to sync device
I managed to factory reset my Moto g4 plus phone...but after rebooting the phone and trying to set up the phone again, it did not accept the Gmail address which I had used to sync the device earlier...is there any way to bypass this requirement so that I can start using the phone again ?

[Completed] R

Alright for the past two week I had searched every corner of the internet looking up on how to install the “MOAR ROM”. Just getting the same answer install with “TWRP”. And to install TWRP you had to root your phone. So now I had to search on the internet and find a tutorial on how to root my phone. In the end I had to go through three different tutorials on how to get the MOAR ROM flashed on my phone. And where I had to go to get the files to download.
Well so you don’t have to do the long, and arbitrary tasks that I had to go through. Here is a tutorial – Telling you from start to finish on what you need to do.
This is for the Sprint Variant of the Samsung Galaxy S5. I don’t know if this will work on other version of the S5.
I apologize on the crudeness of this tutorial, a lot of this was written from memory.
All of the software you need to download is provided by clicking on words that are highlighted in brownish tan-ish color
I don’t not nor do the developers of the software you use are responsible for the lost of data and/or lost of your phone. You assume responsible for modifying your phone.
I have not created any of the software provide in this tutorial.
Step 1. Make sure you have VPU1BOA6 (Lollipop) OS installed on your phone.
-To see if you have this already installed your phone.
- You go to your phones “Setting”
- From there go to “About Device”
- You will then see “Software Version” and underneath that you will see “G900PVPU1BOA6”
If you see “OA6” you are good to go on to step 2. for rooting your device. So Please Continue. If you do not see this that is okay all you need to do is either update your phone or you need to flash the appropriate OS on your phone. To do this continue on to step 1a.
Step 1a. If you fail to see “OA6” in under “Software Version” then you will have to download some files.
- You will need to download Odin
- Then you will need to download the OS “Lollipop”
- Once you have both of these move to step 1b.
Step 1b. Warning!!! Installing this OS will wipe your phone of all its data. Highly recommend that you create back of contacts, photos, videos, etc.
- Now unzip Odin, and run SM-G900P_OA6_FullRestore.exe (This is will give you the Lollipop OS it will unzip it to the file destination you wish)
-Run Odin, Click on the AP button – A window should appear, navigate to where you unzip the OS and click on it.
- Now it is time to move on to set 1c.
Step 1c. Now it is time to put your phone into Recovery Mode and to connect to the computer.
- Power down the phone, once the phone is power down hold the “Home + Power + Volume Down Buttons” Do not let go until you see text show up in the upper left corner of the screen.
- Now some of you might see a screen that gives you a Warning about custom firmware and roms. And press up on the volume on button to continue or press volume down to restart the phone. If you want to continue press up.
- If you have elected to press up then you are awesome and it is time to continue on your route to being rooted. Now you will see the Android Guy “Downloading” or something to that effect. Plug your phone into your computer
- Now move to step 1d.
Step 1d. Again Warning: You will lose your phone data. Continue at your own risk.
- Press Start, on Odin once your phone is connected to your computer. Let it do its thing. Go make some coffee.
- Once it has installed the new OS go ahead and setup your “Slight used Phone”
-You ready for step 2. I think you are.
Step 2. Alright you have decide to root your phone, because you love all the options the Android OS has already provided you. But you know your phone can do more and you want more and deserve all of it.
- So first thing you need is the rooting tool and Odin if you don’t have download it. You will also need to two other additional files. SUPERSU and Knox Removal Mod Do Not Unzip these two (2) additional files.
-Now that you have the all four (4) items downloaded. Unzip the rooting tool and Odin. Now run Odin and click the AP button and find the rooting tool you just unzipped. Now let’s put your phone into download mode and connect to the computer.
- To put your phone into Download mode shut it down and hold the “Home + Power + Volume Down Buttons” until you see a Words in the upper left hand corner of the screen and a Paragraph that Say “Warning. Custom firmware Blah Blah Blah…etc. Press Volume Up to continue or Volume down to restart phone” Press up then Android guy shows up with downloading underneath him. Connect your phone at this point to the computer.
-Press start on Odin. Let it do its thing it should only take to 5 minutes at the most. Now that it is done. Shut your device completely down.
-Go to step 2a.
Step 2a. You will need a Micro SD card. Add those two other files. To the root of the SD card.
- Move to step 2b.
Step 2b. You need to put your phone into recovery mode.
- Your device should be completely shut off now. To put into recovery mode you need to hold down these buttons (Home + Power + Volume UP Buttons). You should see in the upper left hand corner of the screen text saying Recovery…
- You will see a list of options you will want to click to on “apply update from external storage” Find one of the two files you add to the root of the SD card and click. It should start to apply the update. Once that is complete. Repeat the process from Step 2b. for the other file.
- Go to Step 3.
Step 3. So you have decide you like to play risky and rooting just wasn’t cutting for you Daredevil.
- Go to “Play Store” Type into the Search bar “TWRP” – Install “TWRP Manager”
- Once it installed, Open the application, Grant the application root access. Now that the application has root access click on Menu icon in the upper left hand side. Once there go to “Install TWRP”.
- Click on “Device Name” and scroll through the device list and find the “Galaxy s5” and click it. It will then go back to “Install TWRP” page. Now press “Install Recovery” And let it work.
-Go to Step 4.
Step 4. Assuming everything for you so far has gone to plan. The next step is to install MOAR (Mother Of All Roms). Do not unzip the file.
-Connect your phone to the computer.
-Now that you have download MOAR. Move it the “Download” Folder on the SD Card. It will make easier to locate later.
- Now power down the phone and go into the recovery menu. To do this make sure your phone is off and now hold (Home + Power + Volume UP Buttons). Once there click on “Advance”, Then “File Manager”. There you will a list of options scroll until you see “external_sdcard”. Now you will see another list scroll until you see “download”.
-Now find the “MOAR” file. Click it, a couple of options will show up and press “Move”. Now a list will show up, scroll through it and locate the "sdcard”. Another list will show up, scroll through it and locate “TWRP” and press “Select” in the lower right corner and let it do its thing.
- Now go back to the Main Menu. Once you get there click “Install”. You should see the MOAR file, click it. It will take you to another screen and it will ask you to “Swipe to Confirm Flash”. After that your coffee should be done brewing and you might want to get a bagel while you are at.
If you get a couple of errors after installing MOAR, remove the battery and then stick back in and it should correct your problem.

Hi there,
Thank you for your share but here isn't the right place for such a threads. Please post your thread here:
Miscellaneous Android Development
Good luck
Thread closed

[ROOT/CWM] Samsung Galaxy Star Pro/Plus

This is a Clear guide to Root your Device.
**note: this will also fix your device if it is stuck in white screen.
First download the file attached below before proceeding into the steps/guide.
**(if you didn't have Samsung USB Driver you can search it on google )
1. Extract the "ROOT - RECOVERY FIX GT-S7262.zip".
2. Place "UPDATE-SuperSU-v2.16.zip" to your SD Card.
3. Open Odin3 v3.07.
4. Click "PDA" then choose recovery.tar.
5. Power off your device and go to download mode (power button + menu + volume down) then press volume up to continue.
6. Connect the USB to your phone.
7. Uncheck the "Auto Reboot" option.
8. Press start. It should be showing "Reset" or "Pass" if it is Done
9. Long press the Power Button to shutdown.
10. Go to Recovery mode (power button + menu + volume up)
11. Choose "Install zip from sdcard" (press power button to confirm)
12. Then " Choose zip from sdcard"
13. Then find where you placed in your sdcard the "UPDATE-SuperSU-v2.16.zip"
14. Then choose " -Yes"
15. Then go back and choose "reboot system now"
Tadaaaa~ ! your Device is now rooted
IF IT STILL WHITESCREEN THEN DO THIS :
*First you need empty SDcard, just put "UPDATE-SuperSU-v2.16.zip" in your SDcard
*Then boot to recovery( power + volume up + home, relase home when you see samsung)
*Then the phone will boot in white screen
*After getting white screen just wait for 15 sec letting CWM to load
*Now you are in main screen of cwm but you can not see it.
*Then Do this following steps.
1. press volume down
2. press power twice
3. Press volume up twice
4. Press power
5. Press volume down 7 times
6. Press power
7. Wait a minute and press back button a few times and press power button to reboot.
**Hit Thanks if i helped you
**Sorry for my bad english