Hi there,
I can't ActiveSync with my desktop, it starts looking for network, then active sync starts. A message comes saying "retrieving..."
& then shutdowns my computer.
Any body had this experience & knows how to resolve it?
I'll appreciate your help
I am using JamIn & tried ActiveSync 4.1 & 4.2 . .
SETUP AGAIN
IT IS BECAUSE UR USB DRIVERS CRUSHES OR SAY IT HANGS
FOR THIS U MUST REINSTALL UR OPERATING SYSTEM EX.WIN98,WINXP ETC
IT WILL SOLVE 100%
Thanks for the reply
I tried the same with my laptop, it crushes also
Can there be other reasons?
I tried to Sync through Bluetooth, same result
Windows crushes & restarts
Can anyone help????? Please
Related
I have just flashed my wizard with a TNT wm6 and now I can't get activesync to regonize my device. I am using activesync 4.5. I uninstalled activesync and relaoded it. I have rebooted both my wizard and my laptop. I have checked the coms and let activesync look for my wizard and it tells me that my device has npot been detected. My wizard is showing the plugged in icon and is taking a charge from my laptop but its not allowing me to share info. is there anything I am missing....?
thanks!
I got the same problem! Cant sync with 2nd PC after upgrade to TNT5.0. I reinstalled Active Sync but it wont work. Now I only can sync with the PC which used to flash ROM. Is there any bar in OS that just allow sync to 1 computer?
Nopes !!!
There's no bar of any sort in any OS as not establish connectivity through Activesync.Which Windows are you using,Active Sync will only work on WinXP and not on WinVista.
1.Disable any Firewall or Anti virus program,check connectivity now.
2.disconnect phone from usb cable,delete partneship from pc and phone.
3.Uninstall Activesync,reboot pc.
4.Get phone into bootloaders mode (multicolor screen),Hook up the phone with pc via usb cable,check if usb appears at the bottom of the bootloaders in the phone,if it's there than,it's establishing connection with phone,if not then,there's a problem either in anyone one of these :-
a) USB cable , b) mini usb port of the phone c) Usb port of the PC.
Dig out the problem and rectify accordingly
Cheers !
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
DiCham said:
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
Click to expand...
Click to collapse
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
when it set to advanced networking it should give up a network device
in the network connections folder
rightclick this network device and choose properties and in there
uncheck the kaspersky protocol (not uninstall)
you can also try to uncheck the advanced network setting on the wizard
japsfinest said:
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
Click to expand...
Click to collapse
Sadly, I have no development upto now because I have no time to reinstall Windows in 2nd PC! I hope it will help... thinking about USB driver/controller reinstall first, it will take less time than whole WindowsXP...
japsfinest: do follow da_jojo, it worked!
da_jojo: thanks very much! It work but unfortunately, i'm right on reinstalling Windows! hehehe....
Hi evryone,
I have these days a curious problem with Active Sync (that worked very well before with: Active Sync 4.5, Asus P525 WM6.5):
The usb connection work fine: the phone is charged, the storage card is visible when I turn on "USB mode", connection test show: USB connected
but the sync can not work because "device not detected".
I don't install anything neither make any change on my PDA before that.
Could anyone help me?
Pleaseeeeeeeeeeee
Many Thanks by advance
can you recall doing anything that could've done this? any application installation maybe?
Thanks Nir for your replay, i found the problem: it was a bug of Active Sync!, I reinstalled Active Sync IN REPAIR mode (remove Active Sync and reinstall anew one would not work) and all go fine again.
delete any partnerships on both device and pc, start a fresh. Also try turning off "enable faster data sync" in usb to pc.
damn you got in there quickly lol
kool at least its resolved lol
Active sync and device shows connected but cannot syncronise
Hi
I have O2 atomlife and in my laptop, i am not able to syncronise. when the device is connected to the laptop via usb cable, it shows connected. But no way to sync. I tried installing in another pc and it works fine there. Can some one help please.....
vinod
Many times it happens that I am not able to connect my g-smart i120(wm6) to my laptop I tried serial option instead of USB, it connects only sometimes not always No Idea what to do! Help me!
I had experienced something similar and i ended up deleting the sync relationship on both devices and reinstalling Activesync. You could alternatively just reinstall activesync and see if it works.
hi guys,
i m facing the problem when i connect my windows mobile2003SE to Pc via sync it shows error
''can not exute repllog.exe''
even i hard reset many times but i m still facing the same problem
plz help me.
thx.
Hi Guys,
Any help would be appreciated please. I am currently running Windows Vista. My mobile device is a samsung omnia. I have been synchronizing my phone successfully for the past few months. However, last week, when i tried to connect with the cable (as always), I get the error "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer"
4.5 as i know, is an XP programme so im stuck... I have tried disabling my firewall and this does not seem to help either. I have searched the net and have still not been able to find a solution.
I would appreciate any suggestions!
Thanks
Any ideas please
WMDC
I had the same problem with Windows7. I had to end the partnership with my phone(Sprint Touch Pro), disconnected the usb cable and rebooted the pc. After windows fully loaded I hooked the phone back to the usb and wmdc found my phone, loaded the drivers etc.,and hasn't had a problem since. Hope it works for ya.
I tried this to no avail.
I also uninstalled all drivers in Device manager. I then rebooted and plugged my phone in with "advance..." blocked checked. and my WMDC started up and found my phone. However, for some reason, I can no longer connect to my 3g card when i have this option checked. Then i uncheck the option and plug the phone back in and I get the same error message, and WMDC wont even detect my device.
Ive trolled the web and cannot find any solutions..
Any assistance please!!!
Any ideas why? Should I admit defeat and download active sync 4.5 even though the sync center is supposed to sync my device automatically?
I use EnergyROM if that matters
I dont know if this will help but im using Windows 7 and my phone synced just fine! so its not a prob with win 7. i can soft reset and retart win and try again!
hmm
what rom do you use? maybe its the EnergyROM or maybe my computer is messed up =/
I'm using TAEL and it works fine with W7
try to
-reinstall windows mobile device center
-restart the pc
-hard reset
-use other rom
as an alternative, you could use google sync to save contacts, calendar and mail
You need to download and install the Windows Mobile Device Center.
Moved as not ROM Development
Assuming the following
-Installed Windows Mobile Device Center
-Connected your phone with the "Active Sync" option
-Getting an error saying "cannot install Generic RNDIS device" or something like that
Do this to fix your problem
-Go to your phone's Settings > Connection > USB to PC
-Untick the "Enable fast data synchronization"
Your pc should now automatically realize that's a phone connected to it and should start installing it properly
if you want to transfer files across, do it in "Disk Drive" mode, since ActiveSync is painfully slow
Thank you very much guys, works just fine now
I used myphone to sync my contacts and such, i just needed a sync to a computer because it's faster to flash roms that way
and i use disc drive for transferring videos and pictures
just for a reference, for people searching for a solution to a similar problem, which one did the trick for ya?