Hi
I have a qtek 2020. I have upgraded to WM 2005. it worked in wm 2005.then while i have upgraded to wm 2003 Now it does show usb or serial v1,06 on the screen. Please help me.
Lucky you, you're stuck in b/l mode. Look at me, unable to start my qtek2020, unable to enter b/l mode........ I envy you
Put your qtek in the cradle and try again.
cheers,
J.
I tried again again but nothing.What can i do another?Please help!!!
Related
I recent have an error while Upgraging my Jam whith latest firmware..
Evrithig goes ok but after stage 1 I ve got DAWN screen
And my jam has not worked anymore ..
Look the attached Screen
maybe anyon know about this problem ?
Same Problem
Hi Xaoc,
I have the same problem with my T Mobile MDA Compact. My Compact does not work anymore, too. When I try to turn it on, it does not. It turns on the Bootloader mode. On the screen; at the top it writes "Serial" and at the bottom it writes "v 1.00" and thats all, it does not turn on anymore.
It occurs when I tried to flash my German ROM to English ROM.
Once I solve the problem I will inform you. Please inform me if you solve the problem.
Thanks
AE
Ok man..
I will post info here, or just send this devise to technikal support
Technical Support
Sending the device to technical support will be the last choice. If they accept the device as this condition under the warranty no problem otherwise they will charge too much money to fix the device!!!
AE
Hi Guys. I have absolutely the same problem see http://forum.xda-developers.com/viewtopic.php?t=19548 here. Try one thing. It´s not solution, but for me working as emergency solution. Try to pull a little bit back battery cover to disconnect battery for a second and then push it back. Try to push on/off button. Device should start. And never do a soft reset by soft reset button or by software reset button. Always use back side cover or the device start in bootloader meno again.I alread try almost everything to solve the problem and no way. Even my compact cant read backuped SD card. That´s why I have only this emergency solution
I don't have this problem myself, but I read on this forum somewhere that connecting your Compact to to USB cable and running the update program again should fix this error. The error bascially means that the ROM upgrade failed. re-connecting and re-running the upgrade program from your desktop pc should work. Good Luck and let us know whether it works. In several other threads the problem is mentioned and fixed, so do a search.
It will work, trust me
When you see that "serial" and "v1.00" thing. That's means you are half way there already. That's in boot loader mode. When you take off the back cover (battery cover) and put that back, yeap... it'll work. Somehow that bypass the bootloader mode for that particular "restart".
What you need to do is. Just reconnect back and do the flash again, since you would have rebooted your desktop pc or laptop (the one that used to flash your Magician).
For those who encountered similar problem, restart your machine (desktop pc or laptop). then reconnect back. Try run the update again. This time, it will not be able to detect your current ROM version cause of the "boot loader" thingy. Just flash it... yes, you'll get it. Give it a try. I've done on mine and so do many others. Have fun.
cheers,
cyberjaya
I solve the problem
Hi all,
I had the same problem and finally I solved it, however now I have a French QTek S100 ROM.
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
I had the same problem
Hi,
I had the same problem. My desktop computer shut off during the update and the second time it stoped in the same %.
I solved the problem switching computers to my laptop.
good luck
S100 English ROM
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
T Mobile MDA Compact (using Qtek ROM)
ROM version: 1.03.02 FRE
ROM date: 11/02/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.157 FRE
I Mate JAM ROM
Hi All,
I used I Mate JAM ROM and now my MDA Compact is working in English.
AE
T Mobile MDA Compact (using I mate ROM)
ROM version: 1.06.00 WWE
ROM date: 01/06/05
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.06.150 WWE
Hi all
I have the same problem
When I upgraded my mda compact it started to upgrade
and it did not passed zero it tolled me just like in the picture in the first post
and it did it again and again and again
and finaly it crashed
it shows the boot loader
Serial
v1.00
Can you guys tell me how to fix it!!
Thx aloooooooooooooooooooooooooooooooooooooooot
qtek rom
hey cyberjaya..u said u r using the qtek rom on ur magician (mini) and m using the tx2.03 rom please can u let me know d difference between both roms which one
is better in each n every aspect that is m talkin about the (GUI),stability,features n etc..
please can u let me know so tht i can take a decesion whether to flash my device or not please...let me know.
thanks.
Chigz
I have windows vista and i tried to upgrade my firmwire with wm6....
I and now my JASJAR won't turn on... it says SERIAL on the screen...
what should i do now... PLzz help me....????????
You are stuck in Bootloader mode. Read the wiki and search the forums for "bootloader" and you will find plenty of advice.
danidabest said:
I have windows vista and i tried to upgrade my firmwire with wm6....
I and now my JASJAR won't turn on... it says SERIAL on the screen...
what should i do now... PLzz help me....????????
Click to expand...
Click to collapse
hi,
known problem,
(upgrade does NOT work with vista ) (only with "old" activesync on xp.)
try again with xp machine !!
greetings
Wout
go to wiki
http://wiki.xda-developers.com/index...=HTC_Universal
http://wiki.xda-developers.com/index...0Boot Screen
http://wiki.xda-developers.com/index...ootloader%2 9
Thanks...
Hey thanks Guys... I used windows Xp and my fone is fixed.. infact i was able to use the new wm6 rom as well..
thanks for the support...
Hi everyone,
My qtek s200 dont boot, i just try hardreset, update rom in bootloader but nothing result..
Qtek stays in operator logo
IPL 2.10.0001
SPL 2.10.0001
GSM 02.69.21
OS 4.0.0.0
This happens because i was trying update rom to os 4.0.0.4 and there was a error during de instalation.
Then i try connecting again with activesync 4.5 but there was no conection.
now the qtek dont boot to operating system
Help me please.....
downgrade to wm5,upgrade to wm6,everything should work fine.
wich file?
how can i downgrade to wm5 without activesync?
by bootloader?
Wich file and where i find?
Thanks for your help!!
finally i ugprade to prophet 2.20.7.34 and my s200 is alive again...
Thanks....
How? Same problem here
same problem
i have tried again again end again, and now it's ok
note :
at the end of step 1, when s200 said "tap on screen" -> i have taped
after i have start step 2 as indicated in the tutorial
Good afternoon,
first you must conect pu s200 in bootloader mode (press camera button and make reset with your sylus pen- screen must appear three colors) then plug usb cable, then run the upgrade/downgrade rom
In the end the qtek reboot, install de apps and you must make software reset
Bye
Ratzumen
I have the same problem here. I had the wm6 rom on my qtek s200, but my headset worked not fine with it. So i tried to downgrade to the aku 3 rom for my s200. It seems ok. But when i turned the pda on, id didn't go further that the qtek boot screen. I also could not get to the bootloader screen to update another rom. What can i do?
Hello,sorry I'm not too expert, but I've tried to upgrade my qtek 2020 from windows mobile 2003 to WM5 following instructions that i've found on this site, but I've got a big problem. When himaupgradeut_noID start after some minutes it gives me the following message: Error 101: connection error.
My qtek 2020 remain with the Serial (when it is out of the cradle) or -- USB (when it is on the cradle) black screen (v 1.06) and nothing happens... I've tried to reset it pressing the power and reset button but it remains on the same black screen!!
Please help me what could be the problem? What should I do? It seems to be a communication problem with the usb but before starting the upgrade Active sync was running ...
Thank you for your help
imate phone edition upgrade for model ph10b
Hello, i have an imate ppc (the phone edition),,,i cant find an upgarde for my ppc,,, can anybobody help me pls...i tried the upgrade for xdaII that i got from this site.... but it does not work when i installed it ,,,,i would appreciate it if somebody could give me a guide to where to find the upgrade download for my ppc...the only program that work for my ppc is the pointui home,,,,,i also tried to install a phone pad,,,and it didnt work as well....it is sometimes difficult to do a text msg,,,,with the keybord... specially if i am on my way to work,,,,
please help me to upgrade my imate phone edition,,,,
thank you for your help...
any guide I could give would only be a directly
copy paste of the readme in the zip file with the rom upgrades
wm5 wm6 wm6.1 same deal same readme
Hi everyone
well i got a new k-jam for myself and i was just upgrading to 6.1, by going to a wm5 noID rom and then CID-Unlock and then 6.1, well it didn't work, i got errs like 264,222 about connection and usb connection with ppc and pc,but they were just fine.
then i did this! i coid the update files to storage and i runned this "enter boat loader.exe" and so i got stuck in boat loader.but now every time i take out my battery and put it back again and turn on ppc,i got my windows allright,but i can't do a soft reset now,cuz it will stuck in boatloader again and another hard rewset again.
help me! i cant live like this! tnX.
visite Correct forum
That is Not k-jam forum.
You can visite this forum.
HTC Wizard: 8125, K-JAM, P3400, MDA