Database Info

WMP won't play protected media files anymore!

I have posted this in the Prophet forum, but realized it's not prophet-specific and I might stand a better chance of getting an answer here - sorry for double posting, but it's a little annoying not to be able to listen to music I paid for and I haven't received any suggestions yet...
Basically had a device that was acting funny enough to deserve a hard reset. I had about 25 music files that were DRM-protected but sync fine and play flawlessly on my Storage Card. (Oddly, that's the LIMIT! Windows Media balks at anything over 25 and gives an error, which Microsoft recognizes and comments on on their site - anyone know anything about this?)
After the hard reset, none of the files would play, which I didn't take as any huge surprise, I just synched again. No go - The files synch fine, but I get an error saying something about the filesize being too large and unable to play ANY file in my library. (the actual error message is in Chinese, so I'm not sure about the exact wording in English, sorry)
I have deleted MSMETADATA from the storage card and thought this would solve the problem, and upon the next synch I got a new directory that I didn't notice before - WMDRM, and a file WMPInfo.xml. Don't know exactly what these do, or if I should delete them.
Has anyone experienced this and have any advice on a next step? I really REALLY don't want to hard-reset again as I've kinda given up on SPB Backup (it was after a scheduled backup that things got strange) and am re-installing things by hand.
Thanks in advance!

Blueplayer could = better A2DP sound

If anyone here has tried to use an i.tech stereo headset (like the R35 or S35) or other A2DP headset and has been dissapointed with the sound quality (commonly referred to as a "ringing" distortion or hissing over the sound) using the A2DP for tornado hack, its because the MS Bluetooth Stack isn't 100% compatible with all (most) headsets. Its particularly noticeable on i.tech, but the reduced quality is true on many others as well.
In case you didn't know, Blueplayer is a standalone app that streams music to A2DP headphones even if the phone doesn't support A2DP in its own stack! That means any phone with bluetooth (some even claim older 1.1 devices as well) can bypass the usual MS stack in our devices and stream stereo sound directly to a compatible headset!
The software was written for Nokia S60 devices initially, but there have been Pocket PC and java versions (only compatible with specific phones) released since then as well.
I'm very annoyed by the sound quality of my itech R35 paired with my imate SP5. I'm 100% sure that software such as blueplayer would solve this problem. However, the PPC and java versions don't seem to work on my device.
Can anyone help me figure out how to make this work? I tried extracting the files from the PPC cab file, but its complaining about missing libraries. The install may add some things to the registry that I'm missing.
Better yet, does anyone have anything like this for WM Smartphone?

what are you missing? I got blueplayer running with my S35 and the quality is excellent and range good(for me)...
Unfortunately I am using a Wizard...

I wish I could get it working!
I can't figure out what it is, but I'm having trouble.
Normally I can make any app work (even if its for PPC) by pulling the files off of a PPC installation, and run the .exe on my smartphone and it just works.
But I keep get errors about libraries not existing or being in the wrong place. I need to figure out exactly what happens when the app is installed- what files go where, any registry changes, etc... There's gotta be a way to make it work on smartphone!

From memory,
There are a few files and registry settings that I can remember but barely, but if you want I can try to install it again. I removed it because I don't use MP3s anymore..

Yeah, if you don't mind helping me out, that'd be amazing (also for the smartphone community as a whole).
Why don't u use mp3's anymore?

I can just look up the settings for you, you got to do the work ;-)...
I find them too large for my 1Gb MiniSD, using AAC+ now... nice quality and file size.
Just PM me what you want to know...

Well, I don't know what kind of entries this will place in the registry. To be honest, I'm not sure how to check myself either. Is there a way to tell EXACTLY what a .cab does?

Found it!
Interesting program for those in my situation:
http://thinkabdul.com/2006/12/20/ms...nformation-from-windows-mobile-cab-xml-files/
lets you see exactly what steps a cab installation goes through. Any reg. items, what the actual filenames are, what directories they are placed in, etc...
Amazing little tool.
However, I still haven't gotten blueplayer to work on my sp5... I wonder why?

thanks for the link, I needed something like that as well, going to compare the differences in the Widcomm bluetooth hacks...
BTW, how do you get blueplayer to work on a smartphone anyway without the touch screen?

Oh, simulating a touchscreen is easy... most apps let you navigate using the joystick, but it gets annoying and sometimes a touch is needed to click (for example an ok button).
There's a great little app call SPhelper that places a mouse pointer on your screen that can be navigated using the directional joystick, and "clicked" like a screen tap.
Its pretty cool.
Anyway, the problem is that I can't get Blueplayer to operate, even with all the .dll files in the right places. It says its missing something.

new2city said:
I can just look up the settings for you, you got to do the work ;-)...
I find them too large for my 1Gb MiniSD, using AAC+ now... nice quality and file size.
Just PM me what you want to know...
Click to expand...
Click to collapse
Here's all I know:
I poked around in the .cab installation and found that there are 4 .dll's that go in the \windows dir (msibtstk.dll, msibtapi.dll, CHS.dll and TW.dll), and two .exe program files that go in program files\msi\blueplayer (STLoader.exe, and MPOBCE.exe). AFAIK, there don't seem to be any registry entries that it inserts.
Now, I've done this with PPC apps before, normally all I have to do is run the .exe after all files are in place, and it will work (obviously with some minor annoyances due to missing the touch screen).
However, every time I hit MPOBCE.exe, all I get is:
"Alert
Can't find MPOBCE or one of its components. Make sure the path and filename are correct and that all the required libraries are available."
There's gotta be something I'm overlooking... Anyone?

No man, there are some(I found some) entries, but I thought you were set and removed them already..
will reinstall and get back to you again...
BTW do you do a full backup of your phone? I use SPB backup and it is good..

oh, cool, I couldn't find any... let me know!

entries but not sure if working...
Here are the two registry inputs(rename to *.txt) I found on my system.. Unfortunately, I couldn't get it to work this time as I am using Widcomm bluetooth stack... wonder why.... Last time I used this was with MS Stack on...

new2city said:
Here are the two registry inputs(rename to *.txt) I found on my system.. Unfortunately, I couldn't get it to work this time as I am using Widcomm bluetooth stack... wonder why.... Last time I used this was with MS Stack on...
Click to expand...
Click to collapse
No, that makes sense. The Nokia one is designed to operated by tunnelling through the s60 stack, and the WinCE version was most likely designed assuming the MS one.

No go... I entered all this stuff exactly like you said, and I get the same errors.
Interesting to note is the drivers reg keys already existed!
It appears that the other exe (stloader.exe) did run and I think entered those keys. The actual program tho, seems to not run (and therefore never entered the proper keys, I'm guessing).

Sorry man.. to get your hopes up..
Right now, I got Axim Widcomm Stack running on my Wizard, but still get the memory issue after a long time powering off bluetooth.
oh well, back to waiting and testing new stacks..

Hey, I've got another idea if you wouldn't mind helping me some more...
Could you try to manually install it the way I've been doing on your pocket PC device?
The reason I ask is because it will determine if there's some sort of PPC-specific code (which I don't think I've ever encountered or even heard of before).
I attached the files and directory structure that I extracted from the cab. If you could, please try uninstalling BluePlayer and tell me if you can get this to run by manually copying the files here.
If it doesn't work for you either, than its because my method is flawed and I'm missing something here... and I shouldn't give up yet!

ok, I will give it a go, but most probably I can only go as far as getting the program to run... Feel comfortable with the widcomm stack, don't feel like disabling it..
just give me a few hours.. my stupid SD USB card reader not working properly... got to look for my cable.. damn!!

good news is, the program starts with the exceptions
1)at first start after putting the files in place, the program starts a few times with the L2Cap error...
2)After a few failed restarts, followed by a softreset, the registry settings in drivers(L2Cap..) are in place and the program runs without error.
3)Now it's up to you to test it with MS stack bluetooth on, as I cannot confirmed this for you.. good luck buddy...

PDA Set up for Newbies

There are a lot of great things on this web site, but not much for the real newbie. This submission is to help newbies get up to speed. The concepts and some details here can help almost any newbie with any PDA.
I’ve worked with computers for 30 years since they were driven by “audio cassette” tapes. BUT I’m a PDA newbie! When I got my PDA, a Cingular 8525 (HTC Hermes), I compared it to my last cell phone and was amazed that it had a color screen. I had no clue how I was supposed to get it to do what I wanted it to do. Since I‘m retired, I spent long hours on many days researching, finding free software, and learning and doing things to make it what I wanted. These are the results. I’m not going to go into all the research, just give you the findings and actions. Read your manual or download one from the Internet to learn the very basics of your phone. Try every possible button, menu and program to see what they do. Don‘t be afraid to crash your PDA at this point so long as you know how to do a Hard Reset (HR). I’m not going to give keystrokes on how to find the following data. Just don’t transfer important information to the PDA until later.
First, decide what you need to do versus what you would like it to do. Here’s what I wanted. I travel a lot and wanted a mini computer I could do MS Office work on, access the Internet to take care of business, call home on, find my way in strange locations, and enjoy a little. IOW, do what my desktop does except I wanted to carry it in my pocket.
One thing that will happen while you are doing all the following is that many of the PDA programs will show up as installations in your “Add/Remove Program” program in your Control Panel on your desktop. Since this includes entries going into your registry, it can lead to different problems. I use Norton Ghost back up to totally back up my system drive, let things happen as they will, then restore it back to normal when I’m all done. Then I install only ActiveSync, MyMobiler and Remote Keyboard plus a few others than I want to sync with when I connect occasionally. You should strongly consider doing this yourself.
First, I found out what I had - A full install of WM6 with several programs I really didn’t want and a real problem when I began loading program I wanted - not enough memory. The device says I have 64 Mb of RAM and 128 Mb of Flash memory (this is the “hard disk” storage available). When I looked at memory allocation it said:
Storage Program
Total 44.77 48.77
In Use 10.96 23.55
Free 33.81 25.20
This means out of the 128 Mb of storage 44.77 + 48.77 = 93.54 Mb were available and being used. Where’s the rest? Being taken up by the Extended ROM which holds the installation and system programs you are safer NOT playing with unless you know how to - like RegEdit, Task Manager (not Task), etc. These are system “hidden” files you can play with and really screw up your PDA. With “AdvancedConfiguration” you can set Extended ROM to be read and used. Also, almost ½ of the total available area set aside for Program installation on the hard disk was already used. I tried and found I could NOT delete or move any of the originally loaded files in “Windows” folder. We’re stuck with the bloat.
I haven’t found out for sure but (someone correct me here, please) the Storage seems to be used for a dedicated operating Page File or programs loaded into active operating memory type of work based on how many running programs you have running right now and the Program refers to the actual Flash (hard disk) space set aside for installations. Think of your desktop as having only a 50 Mb hard disk and having to have the operating system, Page File and programs plus storage on it. Doesn’t leave much.
A neat little trick I learned is that when you do a HR and are reinstalling the OS it pauses for 3 seconds with an explanation screen at one point before going on to install other proprietary programs (some of which were junk to me). If you want to know what was different, back up all your personal data and do a HR and let it run fully. Check all the Settings and Programs screens to write down what you have. Do it again but push the Soft Reset (SR) pin in the hole when it gets to that 3 second pause and let it reboot. It will stop the extended installation. When you do this you will find the numbers are now:
Storage Program
Total 44.77 48.77
In Use 5.77 22.85
Free 39.00 25.92
IOW, you cut your Page File use (running programs loaded into memory) by ½ but you didn’t really change what was taking up your Flash memory. That’s because during the install every program is loaded into the “Windows” directory and then installed or not. If not installed, they just sit there and can’t be deleted or moved.
In order to change this memory bloat I had to find a different way. The only way I could find was to “cook” my phone and hope it didn’t turn into a “brick” to throw away or send back to the factory for a fix. I began looking at what was available. Keep in mind that I had written down ALL the programs installed by WM6 full and WM6 Lite (fast SR at 3 second screen). I had decided what I would like to have and what I didn’t need or want. This is important to do before this next step.
I am very experienced at installing lots of OSs over the years from CP/M (really, really old), DOS, Windows XT up to Windows XP (very different from XT) and tweaking the hell out of them. Doing it on the PDA had me a little concerned because it’s so tiny and different (so what, right?). I learned that it really is about the same as my desktop in setup and running. The first time I did it, I was worried and then surprised at how easy and straight forward it was. If you are concerned about this step and have this particular PDA, go to http://www.america.htc.com/support/8525/software-downloads.html , download the most current OS and do an install from your desktop to PDA with it. If your phone bricks send it to the factory, it’s their system. Once you’ve done it, it’s much less worrying. If you have a different phone do a little Google research and/or read more on this forum for your particular phone.
I researched different ROM cooks to see what they had compared to what I wanted. I came up with Shamanix and K-Flex as most likely for me. Their installs went just as easily and safely as the WM6 did. Don’t look at just the pretty colors, look at what programs they have and how they function doing what you want. Do some “WM6 FREE SOFTWARE” Google searches to find out what is available out there and what you can get it to do. Here are the test results with both Full install and Lite install:
Shamanix K-Flex
Full Lite Full Lite
Total 66.18 50.77 66.18 50.77 66.80 44.77 66.80 44.77
In Use 2.66 21.00 2.63 18.77 9.11 28.52 2.78 23.19
Free 63.52 29.77 63.55 31.99 57.69 20.25 64.01 25.70
FIRST - Now 66.18 + 50.77 = 110.95 for Shamanix and 66.80 + 44.77 = 111.57 for K-Flex versus only 93.54 Mb for WM6. Suddenly the OS installation files squeezed out an extra 18 Mb of Flash storage for other things. That’s a LOT when many programs average as little as 200 Kb (fit 90 in that free space). Next, K-Flex used almost as much Flash (hard disk) storage as WM6 but Shamanix only used 18.77 in the Lite install which freed up almost 6 Mb for more programs.
Sounds good, right? Remember, check what each OS provides, how you like the looks and what you want on you PDA. Since camera, media and online gaming usage are not important to me, Shamanix Lite is best for me. It still requires a few additional installs to replace what it doesn’t provide but that’s better than the bloat.
(PLEASE CONTINUE ON NEXT REPLY)

2nd half of first post
(Continued from beginning of thread)
Next, I bought a 2 Gb microSD card. That’s great for storage, but I want to install programs to that location, especially the ones I don’t use very often and can run slow safely (cards are much slower than RAM). Save the Flash storage for anything that needs processing speed like music, video, gaming, etc. Once you have a card installed, every time you want to install a program, it asks where to install. If you have access to ER enabled you can select from Device, Extended ROM or Storage Card. Use Storage Card as 1st, and Device 2nd. I tweak installation folders on my desktop but on the PDA you can’t. If it’s going to the Storage Card it will create the proper folder automatically like most Windows installations do in Program Files. Also, if you already have it loaded, it will tell you it must uninstall the prior one before it can install the new one. Actually, they’ve made PDA pretty idiot proof which is a good thing.
Before I go any further, here are two almost mandatory FREE programs you MUST HAVE!!!! MyMobiler and Remote Keyboard can be found many places. Both will allow you to connect your PDA to your desktop with a USB cable and set your PDA aside while you do everything on your desktop. It gives you a copy of the PDA screen on your monitor you can zoom plus use the normal mouse and keyboard on so long as the mouse is hovering over the PDA screen. Sooooo muchchch eeesieeer!!!!!!! In fact, it should be your first two installs before anything else!
Here’s a helpful hit on installing programs. Many times an installation program will come as a .exe file you run from your desktop. What it usually does is extract and create a folder that will hold a couple of files ending in .CAB. Then it will copy the appropriate .CAB to your mobile device. Then it will run the .CAB for installation. The .CAB is the important part. All the rest essentially sets up your desktop to run the .CAB on your PDA. Many times the installation program will be a .ZIP, .RAR, or other compressed file or even a .CAB file. If it’s a compressed file, uncompress it and look for the .CAB. When looking at .CAB files you will often find several with identical names except for the few letters just before the “.CAB”. These are the same but designed for different types of operating systems. I’m sorry I can’t rediscover the link for the details (maybe someone reading this will give us the link later) but I did learn that those with .ARM, .ARM4, Xscale, or rarely PXA, OMAP, or Samsung S3C24xx are for the newer PDAs running WM5 or WM6. Every PPC2000-2003 and every smartphone on the market (at least that I know of) is an ARM device. The others are for older system. If in doubt, try to run each one. The ones that are incorrect will NOT install. Only the one that IS correct will. From then on you will know which type to copy to your PDA. Once copied to a named folder (I use “Install CABs”) on the Storage Card, they can be simply clicked on at any time and installed. To regain memory or stop using it, use “Remove Programs” in Settings/System to get rid of them. You can reinstall anytime later.
One thing I did was move almost all of the CAB files for the programs I wanted to a designated folder on the Storage Card. One suggestion from others is to rename each CAB with a “#-“ in front of the name with the number corresponding to importance of that CAB to you. That way, when you do a reinstall, or HR, out in the field, your CABs are with you and you can see which ones should be loaded first. This works well if there is some conflict with installs one after another. Personally, I haven’t run into that so I rename them to a shorter name that identifies what it is (e.g. in35prtv33.24.arm4.cab becomes PocketPool.cab). The next thing I do is use the settings or preferences in each program to make a folder on the Storage Card the default folder - like My Documents, Favorites, Downloads, etc. Now they won’t be lost if I have to HR the PDA.
Along with the information in the above paragraphs, I do something else because I’m gone when I’m most using my PDA. On the Storage Card (a copy on each card I have) is the installed programs in the normal “Program” folder which are my operating files and a copy of the “Install CABs” folder which also includes a backup of my Contacts. One additional item is a “Serials” folder in the “Install CABs” folder. This has a .txt file of all the registration codes I need plus copies of all the altered (cracked) files I need if I have to reinstall anything on the road. So long as I can Hard Reset my phone, I can reinstall everything back to normal and continue as I need. Since I have several Storage Cards this is on each card. The balance of the Storage cards will have different eBooks, music, DVDs, etc. that don’t all fit on one card. That way, I have several backups of critical files plus entertainment as needed. I use a small dot of different colored paint on the bottom edge of each card so I can tell which card is in the phone at any time.
With all the above, if my PDA freezes or stops working properly, the universal fix-it is to do a Hard Reset. If that doesn’t work, I’m SOL. If it does I’m in business. All I do is a HR (Lite) and soft reset at the 3 second warning. Then I go back into my Storage Card and reinstall those programs I need to get back to where I can work.
Once you have things loaded and working properly, you can consider tweaking the system. During this process you may have found multiple editions of software you want to use like three different registry editors, five different tweak programs, etc. Go ahead and compare and see which ones you want and delete the rest. On a PDA it’s fairly easy. When everything is said and done, you can do a clean HR and only load those specific versions you want and have a fresh, clean, trim system to backup as your first installation process.
Finally, so you can see the results I came up with in this process, here’s a list of the programs I installed. All are on and working. None of them have to be cleared before I can have room to open another one. These are the final versions of similar programs such that there is minimal overlap but expanded utility when more than one is installed.
Sound Pocket Dictate
Mortgage CALC
WkTASK
Touch Caller
Tao Java
GSFinder+
Pocket Mechanic
Adobe Reader
ActiveX Flash 7
Sompy Media Player
enAlarmPPC
True Term Translator
TT Swedish-English
TT Spanish-English
TT Portugese-English
TT Italian-English
TT German-English
TT French-English
Town Compass US Travel Directory
Town Compass DataViewer
Tagalog for Travelers
SKTools
Paris Guide
Metro
mCity Tours
Google Maps
Flashlight Colors
UniSync
Spb Pocket Plus
tGetFile.dll
MIcrosoft .NET CF 2.0
Maufait Instafind
DinaSoft Tap Text
DinaSoft MemMaid
DinaSoft HandyMenu
CallFirewall
Tab Web Viewer (IE)
Dictionary Manager
Schap's Advanced Config 2.0
Yahtz
Warefare Incorporated
Vision Quest
Trivial Pursuit
Super Wild Wild Words
Space Adventure in Infinite Space
Smart Mahjongg
Dames are Trouble Game
Word Mojo
Ultimate Bowling Fighter
Mazera
Mars Need Cows
Hellfire
Bzzz
Realms
1001 Crossword Puzzle
Xplodus
Xonix
Pocket Spades
Patience
JumpyBall
Hot Death Uno
Advanced Lines
Here are my original results on memory usage.
Storage Program
Total 44.77 48.77
In Use 5.77 22.85
Free 39.00 25.92
Here are the final results
Storage Program
Total 66.18 50.77
In Use 36.55 25.77
Free 29.63 25.00
In other words, by opening and freeing the Extended ROM, Putting as much on the Storage Card as possible and applying a few tweaks for caching and folder locations, I still have almost as much of both Storage and Program Memory as I started with to run almost anything without having to remove and reinstall programs on the fly.
It’s a lot easier than you think and idiot proof in most cases. Don’t fear playing with your PDA and making it what you want. Have fun and ENJOY!
Dr. Ken Rich

'Not enough storage is available to complete this operation.' <-- Lies :/

OK im annoyed now - i flashed a new rom last month and it was beautiful up until last week ish when all my streaming apps just stopped working claiming that 'Not enough storage is available to complete this operation.' - i get this error message (or variations) in rss hub, windows media player, TCPMP, the streaming media app, youtube video just fails, and others. really starting to p*** me off now as i cant do anything with my phone
i have over a gig free on the storage card and over 200mb free of internal flash - what the hell is going on!?
if anyone can shed some light on this i would be most grateful
cheers
fusi

ok well i give up forum searches have suggested the only 'fix' is to hard reset. lol that totally sucks i havent figured out whats causing it - one day it was working - the next it wasnt im gonna flash genesis tonight sod it so im banking on that clearing it out - hope this doesnt happen again

Edit - nevermind.

Dunno what's going on, but maybe you needed to check your temp folders. I've found big files in \windows\temp before after streaming hulu and other videos.

Get a memory management software like Memaid or Advacnced Config. and be sure everything except for PIE cahes to your storage card.
Then clean your system.

Thanks for the suggestions guys - i re-flashed in the end but if it happens again ill do as you suggest - though im pretty sure i had loads of space free on the flash and sd as well as ram
cheers!

Are you sure the message was for storage memory and not just memory? You can run out of virtual program memory pretty easily on a lot of roms (just read the 6.5 thread in hacking), even if you have plenty of free ram.

the message i got was exactly as is displayed in the topic of this thread - nice and vague isnt it ^^;
im pretty sure there were no memory issues of any kind on the device at the time of the problem - everything worked apart from streaming - pretty sure the OS got itself confused somehow - hohum!

Try creating a folder in \windows called "cache". Then see if junk appears there (it may require a reset to work). In sk tools, it shows \windows\cache as a junk directory, but I think you have to create the folder to see it.

thats quite an ingenious suggestion - if it happens again ill have a look and report the findings ^^;
cheers
fusi

Don't get too excited yet, lol. Yesterday, I downloaded some youtube vids to main memory and then cut and paste them to my sd card. But the memory wasn't released for whatever reason, even though the files weren't showing up anymore. I deleted them with sk tools, but didn't think of making the cache folder til later. I haven't been able to replicate the un-released memory since then.

Ok, so I was messing around with youtube (watching Danger Island, lol). I found that if I opened total commander w/o closing youtube (used voice command), there are a bunch of temp files in the windows\youtube folder. There was a 3 MB .dat file and a 10 MB temp.3GP file. The latter was clearly the video. When I closed youtube, all the temp files disappeared. I suspect that something is going wonky with your temp files clearing out, or that watching big streaming vids dumps a massive file into main memory that gives the errors. The only way to find them is to look while the streaming app is running. (You can pause it, I'm sure).

[Q] Too many mp3 files

Hello,
I've just bought an HTC HD2.
I received it like this :
- Rom : netDrg 2.5j
- Radio : 2.10.50.28_2
Here is my problem :
I copied lots of mp3 files on my SD card, about 2000 files.
When I start the player, I must wait about 30 sec before getting any song, and I must wait about 2 hours to get the list of artists or of albums. I think theses lists are built with the tags.
When I do the same thing with 300 files, there is no problem, everything works fast.
I tried with other players (Gsplayer and Tcpmp), its the same.
Could anyone tell me what to do : another player ? another Rom ?
Thank you... and excuse me for my bad english ;-)
Pascal.

Try Nitrogen. If you are having trouble with that i would start looking at the collection itself as a possible source of your issues. (Perhaps the Tag data needs cleaning up or you have a couple of corrupt files in there).
http://forum.xda-developers.com/showthread.php?t=523505

It doesn't speed up after time? I would think once it gets the info tagged it would then be done and move quickly. It has to do the initial cataloging though.

Hello and thank you for your first answers.
I've already tried nitrogen with the same bad results.
And Joshme, you're right, its better after the initial cataloging : no need to wait 2 hours, but "only" 30 sec
Another problem : this cataloging action is done again after a power off, a reboot or even a PC connection in UBS mode. It reacts as if it doesn't record this database.
Concerning the tags, I did them myself for all the files with a tageditor on a PC : I replaced all the tags with "artist name - song title" read from the mp3 file name.
I thout it was a good way to have something clean. Wasn't I right ?
Pascal.

Hello
I found the solution.
I dispatched my files into several directories : 100 files per directory (instead of 700 )
Now, initial cataloging lasts 78 sec instead of 2 hours !
Great !
Its maybe a limitation of WM6 ?
Anyway thank you for your help.
Pascal.

You've stumbled upon the correct solution! Now that you've said it i remember having to do this myself when i used WM. Any folders with more than 100 songs in were split into two folders of 50+ and then everything loaded much faster and smoother.

Well it doesn't apply to me and my droid, but still good to know. Thanks!
Sent from my DROIDX using XDA App