Hi can someone direct me to the latest O2 Mini Rom?? thnx a lot
Check the ftp server for full O2 ROM versions. Another possibility is to download any of the ROMs, download the O2 Ext ROM you like, install the main ROM during the last screen tap, immediately press the reset button so that the Ext ROM doesn't get installed. Extract the Extended ROM to your PC's hard disk then copy them over to the Magician and install what you like manually.
Related
Hi all!
I've an Italian version on i-mate Jam and I'd like to install the last English version of the ROM.
I'm trying with the wwe (worldwide English) ROM but seems to doesn't work with my device...
S.O.S!!! Smile
Hello
There are numerous posts on this problem.
Quick extract on the matter from JoelWu as you may get Error 150 Codes
1. Right click on the downloaded Rom EXE-file and extract to a named folder (using Winzip or something similiar)
2. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade
3. Download the MaUpgradeUt_noID.exe
4. Once you have this file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In ActiveSync, go to option -> Schedule, Set it to Manual, this is to make the PPC USB connection to ActiveSync active but don't do any Sync with your PC and PPC during the upgrade process.
6. Connect the phone to the USB, manually sync once. From now onwards, the step is the same.
-----
7. Now run the MaUpgradeUt_noID.exe
8. The upgrade Wizard will start, go through a few checks then eventually come up with the country Id error.
9. Run the MaUpgradeUt_noID.exe file again and this time it should allow you to run the Wizard.
10. The process should then go through 3 stages which should last about 10 - 15 minutes.
11. When finished you should get the upgrade successful notification and a prompt to reset the device
12. In ActiveSync, click on file and connection settings and tick the USB connection.
Many thanks!
I'll try it asap!
Last questions:
if I install the WWE ROM as you told me... the next ROM upgrade it will be possible by the normal exe way or all the WWE ROM need that workaround?
If I install the WWE ROM using the way you told me... Can I came back to install the Italian version of the ROM? Using the normal way (.exe) or... ?
I dont no.. im trying 2 update my Magician for the second time i will post my result first i try with official .exe. if it dont works i use the cracked...
Nope still Country ID error
Thanks!
IT WORKS!!!! :wink:
well... now I've got English ROM on my jam but 2 problems:
- On my old Italian ROM there was an antivirus application installed as default. On English ROM there isn't!!! :-(
Any suggestion to download the antivirus? Is it necessary in your opinion?
- Now, when I'm typing with the std keyboard the Jam suggest me the English words... (obviusly!)
Can I configure the Jam to sugget me the Italian words or the WWE have only English vocabolary inside?
- Wat's the differences fro WWE ROM and US ROM or UK ROM? I'm Italian... waht's the best English ROM for me?
WWE is fine for you. The US and UK roms only have settings for that countries' phone providers in the Extended Rom. Since you're not in either of those countries you can just stick with WWE.
hi friends,
i am a software and hardware developer in istanbul , Turkey
i have a O2 XdaII with 1 gb sdram ,
rom : 1.72.00
ext: 1.72.187
radio: 1.17.00
i tried to upgrade my old phone to wm 2005.. but..
first of all i found different types of roms , ext, radios..
i have
WM2003SE 2.06.00WWE XDA2
Wm2k5 1.65b.96WWE
2.06.100a SG Extended ROM
Radio1.18
Radio_XDAII_v1.18
ROM_XDAII_v1.60a.WWE_WM5
WindowsMobile2003SE_XDA2_2.20.00CHS-translated
Xda_II_172187_Final.exe
Xda_II_172181_Final.exe
Xda_II_Extended_16052.exe
active sync 3.8
active sync 4.0
active sync 4.1.0 (build 4841)
hex editors
xda2unlock.exe
and all other crap HTC64, himaupgradeut_noID and etc..
i tried all of the roms, exts, radios all other f#!*ing stuff..
everytime it takes more then 30 minutes..
at the end of every bios updates.. the activesync sometimes gave errors:
* the usb device could not be recognized.
* generic usb mobile device
* this usb device malfunctioned
* connecting... (and tries more then 4 hours and still connecting)
* found usb device (but not recognized)
* found ethernet device (what?)
and so on..
when i tried to install the updater provided by o2 , it works quite good. but it is 2003..
when tried 2003se then it did not work in Turkcell operator..
when tried 2.06 rom then the bluetooth crashed..
when tried 2003se xda2 2.20.00 CHS then it worked but again the activesync crashed..
when tried combination of the o2 provided ext and wm5 rom it worked! yes.. but again i could not install any application to the phone.. because the activesync again could not connect it..
i tried all activesync versions.. even i installed different winxp versions on my computer.. i tried media center edition 2005 and all other (maybe the activesync has problems), i used different language options.
i tried different computers (maybe the activesync doesnt like my computer.. maybe it have emotion, sensation who knows.. )
i wrote a program to reverse the data going out between pc and phone on usb..
i decode activesync and disassembe it but could not found why it is making like that..
sometimes my xda crashed and
at the end, i tear out my hairs..
i became insane..
at last.. now i have radio 1.12 , rom 1.60c wm5, ext 1.72.187
working .. but sometimes.. sometimes not..
when i change the usb port it works..
is there any stable solution to install wm5 on xdaII without having trouble with activesync?
and is there any Turkish language set (other then the mobilera company provided) ?
thanks..
PS: it i will not find any solution in 1 week.. then i will turn back to my Sony Ericsson P910i phone..
also that f*$#ing phone's support site closed the upgrade process..
you can enter the update service site but , you can not update your phone..
(maybe i shell try to breed tomato.. and build a farm.. forget about software development)
I´m sorry of of your bad experiences with w2k5, but my XDA works really fine with windows 2005! I use the latest version of buzzdev.net, which is the 1.65.b or something like that, and I have to say that everything is ok with my sd wifi card, with my 1giga sd card, and with telephone uses...
Maybe, the unique thing to comment is that one week ago, I soft reseted my XDAII, and then the screen was not aligned... AS you know the align proccess it´s only available after a hard reset, or in settings menu. So I had to enter the security numer tryin´ and tryin´the inside out numbers... Finally, after an aother asoft reset, the screen was aligned again...
73´s
i have the 1.65.c version..
can you please look the version you have?
and does the activesync works well?
thanks
Yap, Activesync runs good. The version is: 1.65b.96 WWE.
You can download in buzzdev.net
73´s
at last i solved the problem..
if you install ext rom .. no matter the bios rom version is..
the activesync is not working..
if you just install wm5.x.x version and the radio rom (anyone) and after the update if you press record and camera button while hard reset (power button and reset same time) . a menu appears with 3 options.
the selection order is no,yes,yes ..
after all.. thats all..
the activesync works well..
i tried 4 different roms and it worked..
now i have 1.70a rom..
but whatelse i am missing with not to install the ext rom?
i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
dear all,
finally i have upgrade my o2 mini wtih
rom: 1.13 wwe
Radio: 1.13
Ext rom: 1.13.wwe
and with bigstorage also.
but miss one thing, smart dialing cab. can anyone help me to post all the cab that i need to installed on my o2 mini. because i lost my Original Extended rom from O2mini.
and also i want to listen music through bluetooth headset (bluetrek G2 1.1)
how can it be done? i have search through the topic about Bluetooth stack but i got confused on the way through. please help me summarise what should i do and need in a simple english.
thank you all.
O2 plus
hi again,
i forget to mentioned o2 plus. i have installed o2 plus on my o2mini which has latest Tmobile rom (upgraded).
it always tells me that this application is only for Xda O2. is there anyway that i can change back from tmobile to o2 without changing back my rom and radio version.
thank you again
There are quite a number of ExtROMs in the ftp. I can't help you with A2DP since I don't use it.
ftp
btw can you please help me how to access the ftp for magician i cant connect to ftp. please explain in a simple english
thank you
Click on the wiki link on the upper left corner and it will lead you to the ftp site. Be sure that you are logged on.
Customise Operator
hi again
how to install the auto config operator (asia) on my o2 mini?
i have download the auto config cab file on ftp. after i install all the cab file, it won;t shows up on the auto config list box.
Customise Operator
hi again
how to install the auto config operator (asia) on my o2 mini?
i have download the auto config cab file on ftp. after i install all the cab file, it won;t shows up on the auto config list box.
Did you soft reset your unit?
auto config
yup i already soft reset.
auto config
yup i already soft reset.
Most of the Ext ROM customizations require to be installed in the main RAM.
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
hi
have you downloaded the official rom from seeo2? ... i think u can just plug ur usb via activesync & just execute the official rom exe
hopefully this will help
hayova said:
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
Click to expand...
Click to collapse
I have seem problem with hayova when I try to upgrade new WM6 rom that downloaded form seeO2.
And I try this way
mazi_v said:
************************************************** **********************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
Click to expand...
Click to collapse
But not success.
Now my Zinc is in black screen and red light when I connect to PC.
Can anyone help me ? My Zinc is dead. (
do not use olydb
just when the healthy ppc restarted replace it with zick quickly.
use a dos app instead of text file and rename it to devicespy.exe with readonly
attre..
What if I dont have another PPC???
I am going thru the very same problem...
What if I do not have another healthy PPC???
Also, will the settings be the same if I am using a Windows Mobile Device Center rather than a ActiveSync 4.5???
Please help me out with this Zinc issue!!!!