Hi all,
I love this tool aWizard and I used it many times on several Wizard's, like the MDA Vario, Qtek 9100, etc.
The question is, is there a tool like this specifically designed for the HTC Prophet, or can this same aWizard be used for the Prophet?
And with this I mean the use of every function: unlocking the CID and RAPI, full backuping ROM and Extended ROM to NBA-file and restoring the NBA-file ROM's back to (another) Prophet.
I now have an English Qtek S200 and I intend to use a Dutch one for ROM backup, which after I will write this Dutch ROM to my own English one.
Thanks!!
Related
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Re: JAFWM-May not be the answer to flashing difficult prophe
rcnomad said:
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
Click to expand...
Click to collapse
Thanks for the feedback, in case JAFWM have some bug, your post will help me to debug it. It would help me also if you could post here your JAFWMLOG.txt , you can find it in same dir JAFWM.exe is located.
But I will check it also myself and will post result here, but sofar i know there are not any problems known until now. However, i have no NEO i will buy one at monday and play little bit. Maybe os not match bootloader or whatever, but let see after i have my NEO.
JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY WORK
Thanks TA_mobile
I did as you recommended and it worked!
JAFWM does what it is supposed to do...
Re: JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY
Today played little bit with my Qtek s200. I flashed it with with follow roms:
JAMin_WWE_ 2130923_21309112_020720_ship
RUU_Prophet_1001321_10013102_11320_DopodAsia_Ship
I did not unlock any CID before and all functions was normal. I did it with skipped and witout skipped bootloader flash. If any one have any problem with a secific rom, plz tell me and i will test it.
All this tests we has done with the new version (1.3beta) released today. You can download from http://forums.phone-tools.cn/showthread.php?t=9411 and try it.
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Tamagochi said:
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Click to expand...
Click to collapse
But what is the reason you want upgrade or downgrade your bootloader? I can not get it :?
Tamagochi said:
...I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????...
Click to expand...
Click to collapse
Hello,
i have an German O2 Neo and sometimes Problems with CID unlocking for Flashing. Start aWizard an use the option "e". Then show on youre XDA and start the enablerapi.cab on youre XDA. At next use aWizard with the option unlockCID and test flashing!
With this Method i can backup my Neo with aWizard and flash the new Jamin ROM, the Qtek ROM not. Rebackup to German ROM also OK but only the OS, the BootScreen (SplashScreen) not.
Sry for my miserable english!
well i CID unlocked using aWizard, and i SIM unlocked using Lokiwiz (all this is on these forums) and then i decided to flash my spv m600 to the latest arabic i-mate jamin rom.
it all went well and works fine, only problem is the arabizer suite, it installs but doesnt run, error message displayed is: cannot run on this device.
its kinda strange coz iv always used imaginet arabizer suite on any device, and not one that was originally an i-mate.
any help on this is much appreciated.
p.s. i thought id post this in upgrading as it is related
Hi there,
Since I installed the latest dopod 818 Pro WWE ROM on my Qtek S200, I have some trouble with the device now and then. It unexpectedly reboots while having conversations after which it can't find my service provider. Then when I disable and re-enable the phone in communications manager it finds the network again. Sometimes calls are not coming through either. I did not have any of these problems with the old Qtek S200 NL ROM.
I also tried different radio roms. 2.19.21, 2.20.21, 2.30.21, no luck.
I like to try the Jamin ROM. Is there anyone who know where I can find a NoVendorID version of the latest Jamin WWE ROM? I tried the regular one in combination with the ROMupdateUtility.exe of the Dopod NoVendorID ROM, but this gives an error at 80% while flashing. After that I was only able to enter the bootloader mode of my S200. So I flashed it once again with the Dopod 818 Pro ROM.
Thanks!
Kind regards,
Dennis
Yeh, I would like to have the No Vendor ID JAMin WWE Rom, too. Could some one please make that? I still do not like the dopod ROM for some reasons. JAMin ROM is still my best choice.
I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!
cidriver said:
I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!
Click to expand...
Click to collapse
I have a G4 prophet. Again, it is impossible to CID unlock a G4 prophet!!!!!!!!!!!!!!!!!!
Why people keep telling me to CID unlock my device? Of course we all know CID unlock first. If we could CID unlock our device, why should we ask for No Vendor ID upgrade?
no-vendor ID
Yes, I'm still looking for a No-Vendor ID Jamin ROM WWE, that would work on my S200... Anyone?
Thanks
Hy!
I have my mda vario flashed with wm6, and works ok. But now, I want another version of wm6 rom on my mda vario. My ipl/spl is 3.08.
Question:
Can I just flash it now with another wm6 rom, or I must first downgrade my ipl/spl? Or is there something else what I have to do before flashing my mda vario with another wm6 rom.
Thanks for HELP!
loop12 said:
Hy!
I have my mda vario flashed with wm6, and works ok. But now, I want another version of wm6 rom on my mda vario. My ipl/spl is 3.08.
Question:
Can I just flash it now with another wm6 rom, or I must first downgrade my ipl/spl? Or is there something else what I have to do before flashing my mda vario with another wm6 rom.
Thanks for HELP!
Click to expand...
Click to collapse
always go through the forum and read before posting and starting any thread,this question has been asked and answered 100 of times,if you wud have cared to search read,you must have found your answer,there was no need to start a new thread for this.
As you have already upgraded to wm6 rom and you know the whole method,why than put this question,yes you can upgrade to any wm6 rom.it doesn't matter if you have ipl/spl 3.08,it's just a bootloader upgrade.New roms are cooked without containing any ipl/spl,therefore they do not change any ipl/spl,so any new latest wm6 rom can be flashed,as your device is already cid unlocked and will remain unlocked,good luck
if you are already running wm6, then read the reviews of the other roms and flash away, now choose the rom that would suit you best
You may find it beneficial to back down to one of the official ROMs first though (T-Mo 2.26 US is usually used), to avoid ExtROM corruption. See http://forum.xda-developers.com/showpost.php?p=1579787&postcount=2 for possible ill effects on battery life if you do not.
Hi, i'm italian and i've bought an qtek A9100 in brazil, now i I have to make an Italian ROM, i have used hard Spl for g4 and now my IPL is 2.21.0001 and my SPL is 2.21.olip then i have try to flash with a wm6 ROM whit ruu and rom update utility... in italian but compare this error during the flash: ERROR[300]: INVALID UPDATED TOOLS
What can i do to flash with an wm6 rom english too???
Tanks for the aswers...
Every day i had to read about that problem.
Please, read again:
http://forum.xda-developers.com/showthread.php?t=332320
and u will see Muns RUU which is working with cid unlocked g4s.