PowerOn password tweak - General Topics

This is how you can change your PowerOn password
method:
[HKCU\Control Panel\Owner]
PowrPass=hex:03 (text box and SIP input screen)
or
PowrPass=hex:01 (nice dialpad like password screen)
Be careful: setting value 2 made me had to hard reset (no input possible)
Perhaps it is for devices with hard keyboard.
Cheers

Related

Quick keys (digits) now letters.

now I have no quick keys from digits, but only letters. I do not know like one can move this again. Hangs it maybe together with any other installed program?
some any ideas?
In the Registry, goto:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Shell
*press left softkey (values)
Change the DWORD value as follows:
HasKeyBoard = 0 (for numbers)
HasKeyBoard = 1 (for letters)
*a soft reset is not needed. but, in case it doesn't change anything automatically, a soft reset wouldn't hurt.
thanks to greatbal for this tip
Just delete all Sony-Ericsson phones from BT devices list.
Hello,
thank you very much! Now I have the HotKeys(Digits) again
Is it a bug with Sony-Ericson?
This is the bug of WinMobile, maybe.

What's On Your Today Screen?

I have been going back and forth between rltoday and HTC Home. I have issues with both and I like them both. I am currently running the HTC Home plugin.
rltoday Pros:
Highly configurable (if you have time)
very light weight
can use with the hidelogo cab
free
rltoday Cons:
limited user community (for my device)
unable to navigate with five-way
limited native functionality (additional scripts or 3rd party apps needed)
no weather plugin
HTC Home Pros:
Customizable (HTC Home Config)
multi-tabbed
built-in weather
built-in ringer profile selections (with HHC)
launch music player from today screen as well as see what's playing
built-in picture dialer
no 3rd party apps/scripts needed
free
HTC Home Cons:
unable to use hidelogo cab
weather plugin is limited (even with HHC)
profile selections don't always work
a. doesn't vibrate but is silent
b. when the meeting/event is over speaker is turned all the way down
when the clock is touched it launches the time/alarm settings (annoying)
So, what are you running on your today screen and why?
hey too bad nobody is answering to this i would love to know all the cool today plugins there is. Im running the HTC Home plugin and sometimes the cool Pointu interface.
How about you guys ?
I prefer the simple but elegant approach...until something really groundbreaking comes along :
TA Pro: controls LED, and gives quick stats and weather
GoodMobile Messaging Calendar and Mail (also displays sms count)
cLaunch: Three 2xtabs (each tab has 2 wrap rows) with my common apps. I've also modified cLaunch.dll to play nicer with the 240x240 display when in the settings area of the app.
Hidelogo to give a little more real estate
I've also replaced battery.exe with an HTC version that gives a better battery icon and little more display flexibility.
QuickMenu 2.7 to assist with app closing, hibernate, soft reset and additional menu browsing needs.
fTouchflo (last free version) for easier touch navigation
I've replaced the default tahoma.ttf with the one from my XP workstation for a smoother font appearance
================
I really like throttle launcher as a replacement for cLaunch, but presently it takes up too much memory and is a little cumbersome to configure on the fly.
PointUI is promising, but needs better hooks into "Good" before I can use it, plus needs more customization options to allow me to get to what I need in a minimum of "clicks" - it's not presently able to give me what my present setup offers me.
================
screen captures with PocketScreen" http://forum.xda-developers.com/showthread.php?t=328627
tmknight said:
I prefer the simple but elegant approach...until something really groundbreaking comes along :
TA Pro: controls LED, and gives quick stats and weather
GoodMobile Messaging Calendar and Mail (also displays sms count)
cLaunch: Three 2xtabs (each tab has 2 wrap rows) with my common apps. I've also modified cLaunch.dll to play nicer with the 240x240 display when in the settings area of the app.
Hidelogo to give a little more real estate
I've also replaced battery.exe with an HTC version that gives a better battery icon and little more display flexibility.
QuickMenu 2.7 to assist with app closing, hibernate, soft reset and additional menu browsing needs.
fTouchflo (last free version) for easier touch navigation
I've replaced the default tahoma.ttf with the one from my XP workstation for a smoother font appearance
================
I really like throttle launcher as a replacement for cLaunch, but presently it takes up too much memory and is a little cumbersome to configure on the fly.
PointUI is promising, but needs better hooks into "Good" before I can use it, plus needs more customization options to allow me to get to what I need in a minimum of "clicks" - it's not presently able to give me what my present setup offers me.
Click to expand...
Click to collapse
Any screenshots?
My Today screen is settled. I have finalized on HTC Home Plugin. No other plugins on the screen. You will notice that I have the bluetooth and the carrier information hid. This is accomplished with Memaid removing the "active call", and "lookup". This does make some additional challenges like the usage of the talk (green) and end (red buttons) as well as the ringer. These are easily overcome by registry changes. I also employed the HTC Home Customizer to make the background transparent and have the "Vista" icons. Music is being played on the device and only showing in the plug (not title bar) through the use of "wk Task". Also I have the battery icon on the today screen but on other apps the time is displayed. This is a result of HHC as well. You can have the time only always; I chose to have it only away from the Today screen. You will also notice that the left and right softkeys are different. Because I am using the standard Windows Mobile dialer, I can customize these keys. One goes to the mail/messaging and the other goes to my IM program. I am running WM6.1 Lite OS (ROM).
I intend to write a complete document on how to do these customizations. It can be frustrating looking for hours and days piecing things together. WinMob has been a lot more fun for me than Palm (former 650 user).
What other options are out there? Feel free to chime in.
Just added quick menu to the list. It is amazing!
Quickmenu
I have found that this application makes my Treo unresponsive. I noticed that after selecting the application, my phone seems to hang or be very slow. I have uninstalled it until I can figure what is making it unresponsive.
Quickmenu Issue
I have not encountered any performance issues (did you soft reset after install). Here are the settings I have employed:
Code:
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Display]
"BatteryMode"=dword:00000003
"BkgndCacheMode"=dword:00000001
"BkgroundImage"=""
"BkgroundMode"=dword:00000001
"SelectionAlpha"=dword:00000099
"ShowAppIcon"=dword:00000000
"ShowTaskClose"=dword:00000001
"TextColorOnImage"=dword:00e0ffe0
"WindowLeft"=dword:00000060
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Exclude]
"Count"=dword:00000006
"Item1"=">\\Windows\\wmplayer.exe"
"Item2"=">\\Program Files\\Navigator\\TomTom Navigator.exe"
"Item3"=">\\ExtendedROM\\Program Files\\Total Commander\\cecmd.exe"
"Item4"=">\\ExtendedROM\\Program Files\\RSA SecurID\\RSA_SecurID.exe"
"Item5"=">\\ExtendedROM\\Program Files\\googlemaps\\googlemaps.exe"
"Item6"=">\\ExtendedROM\\Program Files\\EsmertecJBed\\jbed.exe"
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\General]
"AutoEndSyncTask"=dword:00000001
"AutoStart"=dword:00000001
"CacheImageIndex"=dword:00000001
"EnableXButton"=dword:00000000
"LongPressAppIconFunc"=dword:000003f9
"OkKeyEndTask"=dword:00000001
"RegisterHomeKey"=dword:00000001
"ReplaceStartMenu"=dword:00000001
"RightArrowEndTask"=dword:00000001
"TEditWhenEditing"=dword:00000001
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\MenuItems]
"CustomProgramFolder"=""
"CustomProgramMenu"=dword:00000000
"SubItems"=hex:\
1a,04,00,01,24,04,00,01,2e,04,00,01
"TopItems"=hex:\
00,04,01,00,fd,03,01,01,00,00,00,00,d0,07,01,01,00,00,00,00,02,04,01,00,fc,\
03,00,00,00,00,00,00,06,04,01,01,01,04,01,01,f2,03,01,00,00,00,00,00
Well my today screen is running SPB Mobile Shell 2.
Version 2 looks real nice and has some cool animations too.
lew, i sent you a pm, id love to get rid of palm dialer and the att/bt logos while keeping red/green button functionality.
I got what I need installed (memmaid, total commander) i just dont know what to do.
what registry settings did you use to get the green and red phone keys functional again after disabling the carrier/bluetooth icons?
Green/Red Button Functionality
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Quick Menu
tmknight said:
I have not encountered any performance issues (did you soft reset after install). Here are the settings I have employed:
Code:
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Display]
"BatteryMode"=dword:00000003
"BkgndCacheMode"=dword:00000001
"BkgroundImage"=""
"BkgroundMode"=dword:00000001
"SelectionAlpha"=dword:00000099
"ShowAppIcon"=dword:00000000
"ShowTaskClose"=dword:00000001
"TextColorOnImage"=dword:00e0ffe0
"WindowLeft"=dword:00000060
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Exclude]
"Count"=dword:00000006
"Item1"=">\\Windows\\wmplayer.exe"
"Item2"=">\\Program Files\\Navigator\\TomTom Navigator.exe"
"Item3"=">\\ExtendedROM\\Program Files\\Total Commander\\cecmd.exe"
"Item4"=">\\ExtendedROM\\Program Files\\RSA SecurID\\RSA_SecurID.exe"
"Item5"=">\\ExtendedROM\\Program Files\\googlemaps\\googlemaps.exe"
"Item6"=">\\ExtendedROM\\Program Files\\EsmertecJBed\\jbed.exe"
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\General]
"AutoEndSyncTask"=dword:00000001
"AutoStart"=dword:00000001
"CacheImageIndex"=dword:00000001
"EnableXButton"=dword:00000000
"LongPressAppIconFunc"=dword:000003f9
"OkKeyEndTask"=dword:00000001
"RegisterHomeKey"=dword:00000001
"ReplaceStartMenu"=dword:00000001
"RightArrowEndTask"=dword:00000001
"TEditWhenEditing"=dword:00000001
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\MenuItems]
"CustomProgramFolder"=""
"CustomProgramMenu"=dword:00000000
"SubItems"=hex:\
1a,04,00,01,24,04,00,01,2e,04,00,01
"TopItems"=hex:\
00,04,01,00,fd,03,01,01,00,00,00,00,d0,07,01,01,00,00,00,00,02,04,01,00,fc,\
03,00,00,00,00,00,00,06,04,01,01,01,04,01,01,f2,03,01,00,00,00,00,00
Click to expand...
Click to collapse
Did you install this or did you unzip and launch it? I didn't find an installer (or cab). I will launch it again and reset the device and see if it works.
mobilelew said:
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Click to expand...
Click to collapse
Thanks for the tutorial, but now the red key no longer turns off the screen. Any ideas
Red Button No Longer Turns Off Screen
I too have the same problem with the red button. To aleviate this I have created a button shortcut that allows me to lock the phone by pressing one button. Using QuickMenu, in the options, on the command tab, choose lock from the list and click on create shortcut. You can now assign a button to this to lock the phone. I choose the OK button. So if I press and hold OK, my phone will lock.
By the way, the issue that I was having with QuickMenu was a conflict with CTRL-Pro. After removing it I am now able to use QuickMenu without any problems.
mobilelew said:
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Click to expand...
Click to collapse
why not use the "hidelogo.cab" floating around and be done with it? Never had an issue with any soft or hard buttons.
mobilelew said:
Did you install this or did you unzip and launch it? I didn't find an installer (or cab). I will launch it again and reset the device and see if it works.
Click to expand...
Click to collapse
I use the executable and DLL's from http://www.alensw.com/attachment/QuickMenu_2.7.rar
I extract to ExtROM and create a shortcut to the EXE in windows\startup.
All the settings are stored in the registry, use total commander or your preferred flavor of reg reader to import/export for backup/restore purposes.
Cheers
why not use the "hidelogo.cab"
The hidelogo.cab causes a reset loop with the HTC Home plugin.
You Like ? ALL BLACK ! Verie Nais
Here is my home screen. Running WM6.1 Regular Version.
paypalbid said:
Here is my home screen. Running WM6.1 Regular Version.
Click to expand...
Click to collapse
What are you using to put the icons on the screen?
mobilelew said:
The hidelogo.cab causes a reset loop with the HTC Home plugin.
Click to expand...
Click to collapse
Yes, yes it does - good luck!

Japanese QVGA IME - Help!!

Hi All,
I have been trying to get japanese input working on my Raphael, and have run into some problems. Here's what I have done:
1. Installed LesJapanNo6 - all working/tested no problems
soft reset
2. Installed IME_31J_QVGA_F file
soft reset
-> manila.exe error, device.exe error, and another exe error (can't remember now - think it was TouchFlo3d related). Hardware keys dead.
3. Made the registry edit to get hardware keys working
soft reset (note, regional settings still Japanese)
After that, every time I would try and input something, or change the input method, I get ongoing crashes in device.exe (until I closed the kayboard).
I then decided to change the regional setting back to English (UK), and then soft reset. Now it starts with no errors, but input is stuck on hiragana and the keyboard icon has disappeared so no standard romaji input.
I think I now have to install the enable_ime_2 and/or enable_ime_3 cabs, but am paranoid I have already done something wrong (crashes etc from step 2). Can anyone more experienced hint at the final steps to get this all working?
Thanks,
Raj
The steps you have above should work fine, but use the VGA version:
http://rapidshare.com/files/159514259/IME_31J_F.cab.html
You might need to go ahead and hard reset before you try again.
Just for reference, I have LetsJapanNo6 and IME_31J_F on my Raphael 1.90.405.1 WWE (UK stock ROM), with the following reg tweaks applied:
Code:
[HKCU\Keyboard Layout\Preload]
default = "E0010411"
[HKCU\Keyboard Layout\Preload\1]
default = "E0010411"
[HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME]
Option3 = "D"
[HKLM\System\CurrentControlSet\Control\Layouts\e0010411]
Keyboard Layout = "00000409"
Word of caution: when you go to edit the reg values, highlight the text and write over it; don't use the backspace key, because for some reason it inserts a lot of garbled text. Once you've saved the reg edits and soft-reset, the backspace key functions as normal again.
Also consider using PQzII to map keycode 0xE6 to IME; this will allow you to press the SYM key on the hardware keyboard to toggle between ascii (A→a) and kana (A→あ) input.
Other known issues: JP IME breaks T9/word suggestion, some other minor oddities.
SoftBank is releasing its version of the Raphael, so be on the lookout for a native JP ROM (which will have everything set up correctly) in the future.
Working perfectly now, fantastic!!!  
Thanks!!! 
I tried to map the SYM button to IME. But there is no way for me to specify 0xE6 in the IME menu.
is the new Raphael PQzII different?
aquasesh said:
I tried to map the SYM button to IME. But there is no way for me to specify 0xE6 in the IME menu.
is the new Raphael PQzII different?
Click to expand...
Click to collapse
I typed it in.
I'm using 008e1, but the latest e2 should be fine.
I have had this working for about a month now but was wondering how to get a keyboard shortcut to switch the kana/romanji input. This works perfect.. thanks!!!
thanks!!!
just a shot question:
as I use the hw-kb of my xperia for inputting text, it would be cool to have the tegaki-kb as standard one. Whenever I set it in Windows Mobile-Settings, it gets switched back to romaji-kb on restart.
is there a reg-hack for this?
would greatly appreciate your help!!!
ttkman said:
just a shot question:
as I use the hw-kb of my xperia for inputting text, it would be cool to have the tegaki-kb as standard one. Whenever I set it in Windows Mobile-Settings, it gets switched back to romaji-kb on restart.
is there a reg-hack for this?
would greatly appreciate your help!!!
Click to expand...
Click to collapse
It might be a problem with Xperia Panels resetting it to romaji-kb (TouchFlo3D does the same thing on the Touch Pro).
If you use PQzII, you can configure it to override the default input panel. You can even specify different default panels for portrait and landscape. Just open up the setup program (PQzII_Setup) and the settings is on the first page.
nevermind, got everything working!
thanks!

help - my i600 will type only numbers

I have samsung sgh-i600 and suddenly I can type only numbers unless i use the outer keyboard keys such as W.
I have tried to press FN or CAPS or 123 keys and nothing happends...
Any ideas?
Thanks
Try change keyboard layout
Run registry editor
search HKLM\System\CurrentControlSet\Control\Layouts\e0010409\
and change MappingID to 0x410(1040)
and reboot the device
well, what i found on my sgh-i600 is different registry keys
HKEY_LOCAL_MACINE
HKEY_CURRENT_USER
HKEY_CLASSES_ROOT
HKEY_CLASS_ROOT
Under HKEY_CURRENT_USER\keyboard layout\preload there is a defualt value of e0010409
so where can i change th keys upper or lower text selection?
HKLM is HKEY_LOCAL_MACHINE
so change Mapping ID in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e001 0409\

[Blackstone] Lockscreen with password numeric pad

Hi to all, I'm looking for a lockscreen for my blackstone that shows during locking a numeric pad (with 0-9 keys), and to unlock, the user must press a numeric 'code' (4 digits for example)... Searching google, I found nothing...
Do you know something like this?
Thanks!
Hello you can go to the startup ---> menu --> settings --> lock and there you assign a password you can choose from a numeric pad and to a qwerty by choosing the password strength (simple or strong alphanumeric)
i have this menu on a WM 6.5 i don't know if there is the same on 6.1

Categories

Resources