after a successful flashing from wm2k3se to wm2k5, i can't turn on flight mode of my xda2 so i can't use the phone mode of the pda-fone. and one thing more, i can't connect via cradle to my active sync. when i put it on the cradle it just keeps on connecting lng.. pls help..
Did you upgrade to Activesync 4.1?
Related
this is my 3rd PPC and i am completely desperate about his problem which i never had before. i can not connect my JAMin trough USB or Bluetooth or Infrared, my activesync turns green but after 2 minutes trying to connect it says that can not get connected, also i have tried on my laptop and i get something else when i cradle with infrared or USB my windows crashed while sync. i have no Idea thought it is because of my Antivirus and AntiHackers i have installed on both computers but i get the same error even if i disable them, I have tried activesyc 4.1 and also 4.2 but same result again,
Any Idea????
--
Do you set IP-Protocol for the Network connection with the Windows mobile device in network connections?
activesync
sent you a PM hope this helps
Thanx s2tephen,
i have Uninstalled my Antihacker firewall and it did worked perfectly,
just close any firewall
and try again
it did work with me
Hi guys,
Hope you can help me with this one
I can't ActiveSync with my PC & Laptop. The computer re-starts everytime I connect my JamIn.
I used USB cable & bluetooth to Sync, I got same issue of re-starting with both.
Please help
Thanks
I have HTC 3300 (Artemis).
Suddenly I can't connect via my USB connection. I connect the USB cable, and the charging light start working (so there is a connection), but ActiveSync doesn't respond. I tried to HR the device - but problem doesn't resolve. I tried connect through another computer - nothing.
It seems that the problem is in my PDA, doesn't it? But I can charge it with the USB cable, so there is a connection.
Can someone please help me???
hi; can somene tell me how to solve my problrm, my spv c600 always on bootloader after bad unlock, i try to reflash by upgrade rom , but connection is not etablished by active syncro !!
how to forced my phone for connection with soft upgrade!!
same here, no matter what it stays in bootloader
active sync will not connect in bootloading mode. if you still hear the connection sound (the sound you hear plugging in any usb device)on your pc then it is connected to the pc and can flash a new rom
follow this guide exactly (proabbaly were doing this now just finish from where you left off)
http://karhoe.net/guide-upgrading-htc-tornado-to-windows-mobile-6
I hear the USB connecting sound, but tera Term says canot open
Before you try tera term, go to connection setting of Activesync and uncheck 'Allow USB Connection', otherwise teraterm cannot connect your phone.
thacen said:
Before you try tera term, go to connection setting of Activesync and uncheck 'Allow USB Connection', otherwise teraterm cannot connect your phone.
Click to expand...
Click to collapse
Still no go
did u ever find a solution?
In bootloader mode activesync cannot connect. But you can flash rom directly using ROMUpdateUtility in this mode. Best thing is try with original factory rom.
Another possibility of going to bootloader screen on every startup could be of hardware problem. I also faced similar problem frequently.. but I resolved the problem. My case was because of my camera button.. it actually is not working properly and sometimes remain stuck in, then my handset goes to bootloader on every startup..In that case i just pull it up using some sharp edge.
So, check for any hardware problem to, sometimes cleaning could also help.
I have been having some problems today trying to connect with activesync. I plug my Kaiser in via USB, it starts to connect and I get the transfer arrows (top bar) for a second then it disappears back to a 'G'. Activesync continues to try and connect and my phone just sits there. Can someone help me please?
Hi evryone,
I have these days a curious problem with Active Sync (that worked very well before with: Active Sync 4.5, Asus P525 WM6.5):
The usb connection work fine: the phone is charged, the storage card is visible when I turn on "USB mode", connection test show: USB connected
but the sync can not work because "device not detected".
I don't install anything neither make any change on my PDA before that.
Could anyone help me?
Pleaseeeeeeeeeeee
Many Thanks by advance
can you recall doing anything that could've done this? any application installation maybe?
Thanks Nir for your replay, i found the problem: it was a bug of Active Sync!, I reinstalled Active Sync IN REPAIR mode (remove Active Sync and reinstall anew one would not work) and all go fine again.
delete any partnerships on both device and pc, start a fresh. Also try turning off "enable faster data sync" in usb to pc.
damn you got in there quickly lol
kool at least its resolved lol
Active sync and device shows connected but cannot syncronise
Hi
I have O2 atomlife and in my laptop, i am not able to syncronise. when the device is connected to the laptop via usb cable, it shows connected. But no way to sync. I tried installing in another pc and it works fine there. Can some one help please.....
vinod