Hi,
I have a little problem with my Parrot Ck3000 and my Qtek 2020.
It seems that it's not possible to set the volume from the Qtek. Parrot says it's because the Qtek doesn't send the info via Bluetooth, but I don't realy trust what they say...
As anyone has an experience with that issue ???
I think maybe if it is really impossible to control via the Qtek, a solution would be to use the radio volume button...but how to do that ???
My config is :
CK3000 ver 3.13
Qtek 2020 Rom 1.72.02
Thanks in advance.
Not working here also. Flashed my ck3000 to 3.16 and running 2003se. Still unable to adjust the volume.
Nico
parrot says the true - ist is impossible because of the bad bluetooth stack on the qtek
I have a Qtek S100 and i´ve upgraded the ROM to 1.13 + 1.13 Radio + BigStorage.
I also have a Bluetooth Handsfree SonyEricsson Akono™ HBH-608.
Before the upgrade i could connect the HBH-608 to the Qtek S100 and switch off both the bluetooth or the HBH-608 and when i switch on the HBH-608 the S100 reconected it again.
After the upgrade i connect the HBH-608 to the Qtek S100 and when i switch off the HBH-608 it looses the bluetooth connection and i have to make new one in the devices list.
I've already instaled the BCHS_FOR_POCKET_PC_OZONE.ARMV4.CAB but the problem remain.
Does anyone have an ideia of what's wrong?
Thank you.
Did you install BTHUSB_PATCH_AKU26 from the Extended_ROM? I'm not sure if it would help as I don't have a BT headset to work with, but it's worth a shot.
If you can't find it, get it from the FTP here.
Thanks toomuchdogfur
The problem was in handsfree. I made one reset to handsfree and already it is all good. All good functions. Thanks for the aid attempt.
hi,
i resently bought a heaset sagem BT sh1, (BT stereo headphone) and tryed to use them on my universal originaly with the 02 uk latest vanila rom, but it didn't reconised the headphone as such only headset, so i search on the forum and find that it was because of the missing A2Dp stuuf, so i upgraded and flashed the rom to WM6 wich resolved some of the problem but not totaly,
The headset work not problem to Lisen phone call and stuff, i can even lisen to the sound of the universal ok, screen tap and so one,
but when i start media player to lisen music, it does work for 4 second and then it stop, it doesn't shutter, it just stop, and work again for 4 second only if i close mediaplayer, and it work again for 4 second, i try the reg hack but didn't change anything, i try the a2dp upgrade as well no success,
i try other player no success, what get me is the fact that i cannot lisen any sound that are longer than a few second,
can anyone help me,
thanks a lot
ps i did pass almost all day looking for a solution on my own, without result.
my rom of my universal is Jwrightmcps Crossbow ROM Update 2.02.00 WWE
the O2 XDA Exec WWE Download to be exact.
If you hold it close, does it still happen?
dewild1 said:
If you hold it close, does it still happen?
Click to expand...
Click to collapse
yes it still happen, when i installed it and tested the phone was in my hand and the headphone on my head no more than 60 cm, i do have also a magician and it work perfect with it (i installed the bt stact o2 mini patch) so no problem from the headset, i also have the alpin and i will try to see if it work as well tomorow i to lasy now.
A2DP
Sigiel said:
yes it still happen, when i installed it and tested the phone was in my hand and the headphone on my head no more than 60 cm, i do have also a magician and it work perfect with it (i installed the bt stact o2 mini patch) so no problem from the headset, i also have the alpin and i will try to see if it work as well tomorow i to lasy now.
Click to expand...
Click to collapse
Hi!
Using "Resco Registry" or another registry editor program, find the following key:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
add new DWORD:
Priority256 with value 250 (decimal)
This should solve any lag problems. But to get hi-quality sound, you also need to tweak parameters here:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings
These are the values that result in the best possible sound:
UseJointStereo = 0
BitPool = 58
MaxSupportedBitPool = 60
MinSupportedBitPool = 30
Good luck
WBR, Draco.
hey thanks for the tips but it didn't work, the probleme isn't that i have lag, but that i simply have no sound that is longer than a few second. exept on headset phone mode, and the quality is very good anyway, after i did that reg hack it was even worse, (no offance intended) no i can't have any sound longer than one sec, and in the registery under HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2 DP\Settings
i didn't have any settings, not one. can it be sommthing missing in my wM6 rom ?
Hi,
I have a similar problem using Helmi WM6 rom...I have been using itech bluetooth headset for almost a year now without problems, after switching to WM6, each time my phone rings, i have to press once to connect the bluetooth to the phone and another time to answer,,,It was fine with the WM5 roms..any ideas?
Cheers!
HI! I've bought Teac HP-4BT headset, connected it to my SPV M600 ang played some music. I've noticed thad there can be heared some high freq. "noise", how come? Can this be fixed? I tried WM5 2.20.7.34, PdaViet 4.0.0.0.6 Touch and TNT5 Pro. Same problem with all these roms. Help please!
Found solution for my problem.
check it
Hello, first i'm sorry for my english, i'm spanish
I have i-phono mini BT450Rx-L
http://ayagroup.com/product.php?productid=1220
and qtek s200 with wm5, and when i conect the headset with bluetooth
i only see the hands free mode.
i upgrade my rom with the rom of this post
http://forum.xda-developers.com/showthread.php?t=284578&highlight=a2dp
and next i install tornado_a2dp and i can't hear the music on my headset
anyone can help me?
thank u!