Hi,
I have a little problem with my Parrot Ck3000 and my Qtek 2020.
It seems that it's not possible to set the volume from the Qtek. Parrot says it's because the Qtek doesn't send the info via Bluetooth, but I don't realy trust what they say...
As anyone has an experience with that issue ???
I think maybe if it is really impossible to control via the Qtek, a solution would be to use the radio volume button...but how to do that ???
My config is :
CK3000 ver 3.13
Qtek 2020 Rom 1.72.02
Thanks in advance.
Not working here also. Flashed my ck3000 to 3.16 and running 2003se. Still unable to adjust the volume.
Nico
parrot says the true - ist is impossible because of the bad bluetooth stack on the qtek
Related
i've upgraded with 1.60b.96wwe version of wm2005 my xda II. after that the bluetooth connection was ok. my radio version was 1.14.
but when i changed to 1.18, 1.17, 1.10 and 1.08, a problem with my parrot ck3000 appears.. i'm allways hearing a strong beep or noise when the phone is dialling. it's very hard and disappoint me.
i want to solve that or take back my 1.14 radio...
anyone help me?
Had the same problem with Radio 1.18.
Will try 1.14 now.
Thanks
Sascha
Parrot & Radio version
Ciao I'm tryng the 1.08 version but I'm experimenting the same problem. Some news?
after testing almost every combination, I stayed with radio 1.14 and 1.60c.
this is the most effective combination. still having the problem,but less few times...
I tried 1.14 now and have to say: no difference to 1.18
Strange sound from ck3000 when dialling
Will now try 1.08 and 1.10
Sascha
i am, now, thinking that the problem is the m$ bt stack. in wm2003, we have bt HEADSET, and now we have HANSFREE profile.
in headset mode everything is wonderful (quick connect and disconect. also your parrot doesn't switch off the radio, only short beeps when receiving a call phone in wm2003)
when you're dialling in wm2003 the radio is active until the call is conected to the other person. in wm2005 not. when you are calling, it stops inmediately everything....
any ideas?
Hi @ all
This seems to be very special, but stil I hope for a solution.
I got a new ETEN M600. It's a WM5 based device, and it has the standard f**** Microsoft Bluetooth Stack.
The Nokia 616 is a great CarKit. To pair it, the mobile device needs to handle the Handsfree or/and the Sim Access Profile. Headset profile is not enough.
Both profiles are not included in WM5. Is there any way (!) to get this profiles to M600? Has anyone a solution or an idea?
Volker
Hello Volker,
I don't know the Eten-device, mine's a Qtek 9000 / HTC Universal, also a WM5 device.
I have the Nokia CarKit 616 as well, and nearly the same problem... the bluetooth profile headset is found but the connection is shut down a second after it is established.
The Qtek supports SAP in the newest ROM of T-Mobile (ROM 1.20.34 GER, radio 1.06.00, I installed it skipping the ExtROM, so it works with E-Plus). But my CarKit get stucked in establishing the connection.
This is, AFAIK a problem of the Nokia firmware (it's now 2.40/2.22 BlackBox/Display). This bug should be solved with 3.17/3.00 firmware.
I will test it and give feedback, but today I'm leaving for holidays for 2 weeks.
HI,
im using my qtek s100 (MDA compact) with a bluetooth headset (bluetrekS2)
Connecting works good, only the volume is to low!!
Al the options are set to max.
Also im using the latest rom from Tmobile netherlands.
Ive tried a toshiba stack, then i can change the volume, but this programms crashes all the time,
plse help me, ive been busy for 3 days now... getting insane
Thanks!
Plse somebody help......
:twisted:
I have a Qtek S100 and i´ve upgraded the ROM to 1.13 + 1.13 Radio + BigStorage.
I also have a Bluetooth Handsfree SonyEricsson Akono™ HBH-608.
Before the upgrade i could connect the HBH-608 to the Qtek S100 and switch off both the bluetooth or the HBH-608 and when i switch on the HBH-608 the S100 reconected it again.
After the upgrade i connect the HBH-608 to the Qtek S100 and when i switch off the HBH-608 it looses the bluetooth connection and i have to make new one in the devices list.
I've already instaled the BCHS_FOR_POCKET_PC_OZONE.ARMV4.CAB but the problem remain.
Does anyone have an ideia of what's wrong?
Thank you.
Did you install BTHUSB_PATCH_AKU26 from the Extended_ROM? I'm not sure if it would help as I don't have a BT headset to work with, but it's worth a shot.
If you can't find it, get it from the FTP here.
Thanks toomuchdogfur
The problem was in handsfree. I made one reset to handsfree and already it is all good. All good functions. Thanks for the aid attempt.
I can't pair via bluetooth with a car handsfree Parrot CK3000 rel 3.16. Could saomebody help or have the solution for it?
Thanks in advance.
++++++++++++++
FIXED. reset CK3000 and it worked! problably I had more phones paired than this model allows (?).
I also use the CK3000 with the same software version, no problems here. I just connected it as usual. Works perfect. The only problem I have that I can't set the volume.
I am using my HTC Cruise with my CK3000 and I can not set the volume too.
I have no idea where we can find a software to fix this...