I have a Qtek S100 and i´ve upgraded the ROM to 1.13 + 1.13 Radio + BigStorage.
I also have a Bluetooth Handsfree SonyEricsson Akono™ HBH-608.
Before the upgrade i could connect the HBH-608 to the Qtek S100 and switch off both the bluetooth or the HBH-608 and when i switch on the HBH-608 the S100 reconected it again.
After the upgrade i connect the HBH-608 to the Qtek S100 and when i switch off the HBH-608 it looses the bluetooth connection and i have to make new one in the devices list.
I've already instaled the BCHS_FOR_POCKET_PC_OZONE.ARMV4.CAB but the problem remain.
Does anyone have an ideia of what's wrong?
Thank you.
Did you install BTHUSB_PATCH_AKU26 from the Extended_ROM? I'm not sure if it would help as I don't have a BT headset to work with, but it's worth a shot.
If you can't find it, get it from the FTP here.
Thanks toomuchdogfur
The problem was in handsfree. I made one reset to handsfree and already it is all good. All good functions. Thanks for the aid attempt.
Related
Hi,
I have a little problem with my Parrot Ck3000 and my Qtek 2020.
It seems that it's not possible to set the volume from the Qtek. Parrot says it's because the Qtek doesn't send the info via Bluetooth, but I don't realy trust what they say...
As anyone has an experience with that issue ???
I think maybe if it is really impossible to control via the Qtek, a solution would be to use the radio volume button...but how to do that ???
My config is :
CK3000 ver 3.13
Qtek 2020 Rom 1.72.02
Thanks in advance.
Not working here also. Flashed my ck3000 to 3.16 and running 2003se. Still unable to adjust the volume.
Nico
parrot says the true - ist is impossible because of the bad bluetooth stack on the qtek
Hi @ all
This seems to be very special, but stil I hope for a solution.
I got a new ETEN M600. It's a WM5 based device, and it has the standard f**** Microsoft Bluetooth Stack.
The Nokia 616 is a great CarKit. To pair it, the mobile device needs to handle the Handsfree or/and the Sim Access Profile. Headset profile is not enough.
Both profiles are not included in WM5. Is there any way (!) to get this profiles to M600? Has anyone a solution or an idea?
Volker
Hello Volker,
I don't know the Eten-device, mine's a Qtek 9000 / HTC Universal, also a WM5 device.
I have the Nokia CarKit 616 as well, and nearly the same problem... the bluetooth profile headset is found but the connection is shut down a second after it is established.
The Qtek supports SAP in the newest ROM of T-Mobile (ROM 1.20.34 GER, radio 1.06.00, I installed it skipping the ExtROM, so it works with E-Plus). But my CarKit get stucked in establishing the connection.
This is, AFAIK a problem of the Nokia firmware (it's now 2.40/2.22 BlackBox/Display). This bug should be solved with 3.17/3.00 firmware.
I will test it and give feedback, but today I'm leaving for holidays for 2 weeks.
HI,
im using my qtek s100 (MDA compact) with a bluetooth headset (bluetrekS2)
Connecting works good, only the volume is to low!!
Al the options are set to max.
Also im using the latest rom from Tmobile netherlands.
Ive tried a toshiba stack, then i can change the volume, but this programms crashes all the time,
plse help me, ive been busy for 3 days now... getting insane
Thanks!
Plse somebody help......
:twisted:
Hello,
I have upgraded the rom on my mda to 2.26.10.2 and would like to know how to get A2DP support to play audio through jabra BT headset. I downloaded tornado but do not know how to proceed from them. Please advise. Thank!
I 've a Parot bluetooth car kit with GPS.
I've problem with the connection between the Qtek and the Parot.
The connection work direct...but after a few seconds, it disconnect and the connection come back...and so again and again.
Navigation program is TomTom5.1
I think a problem with the Blutooth version maby ?
Qtek 2020i Rom 1.11.00WWE Radio 1.02.00 Ext Rom 1.11.112 WWE
Thx for your help, idee or link (blutooth third-party software)
TontonPC