Has anyone got a copy of the version before it included the BB client please. I upgraded to the latest rom, but since doing so I can not install TT3 and have my Jabra BT250 connected at the same time. I therfore summise it must be the Rom. But to check this I need the Re-flash it back to how it was - only problem is I do not have a copy of the older rom version. The FTP site only has the newest version on, so if anyone can help I would be very grateful.
Thanks.
Related
As I am using XDAII for 2003se which is 2.0600WWE downloaded in this forum (http://forum.xda-developers.com/viewtopic.php?t=16880). The radio is 1.18 and the bootloader is 1.01. As I can upgrade my rom from 2003 to 2003se without any problem, I would like to upgrade it to WM5 in these few days.
However, I face some problems in my updating.
I have try XDA_WM2k5_2.01a64WWE, XDA_WM2k5_2.01a00WWE, however, I cannot search the phone network after upgrade rom. As I have read some posts before, I know that there may be my radio's problem, so I upgrade my radio also. I have try 1.17, 1.18, 1.08 with these rom. Unlucky, it also cannot search phone network.
So. for the only solution is get back 2003se with "Asia O2 Xda II WM 2003 SE Upgrade" in this forum. I can get my network back.
As the result, I would like to ask that what problem am I facing and what can I do? Is it the problem of bootloader ? or the problem of radio?
And also, there have "Asia upgrade" for WM5? It helps me a lot and I need not to afraid the networking problem.
Please help me. .
location?
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
yetdy said:
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
Click to expand...
Click to collapse
waht edition of active sync do you have? to get wm2005 to work it has to be active sync 4.0 or higher and for the newer roms you have to have AS 4.2 or equivalent beta versions
I come from Hong Kong
I am using 4.2 for sync
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
yetdy said:
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
Click to expand...
Click to collapse
hmmn...
you did not read thoroughly...
AS disappear normally...
are you using the hima no id dot exe?
visit the wiki :roll:
Jojo,
I tried installing the following files that I downloaded through this website:
HIM_3.00a.32_WM5_AKU_3_CLEAN
XDA_WM2k5_2.01a64WWE
WM2k5 3.00a64wwe
I understand that AS will disappear the same way as it does when I installed SE. However, what puzzles me is that all of these installers will inform me that there is an error and I could not proceed further with the installation. I even have to restart my laptop because AS couldn't communicate with my himalaya after my attempted installation.
Sorry I'm not well versed with computer language/jargons that's why I could not understand the readme file. I would really appreciate it if you could guide me. Thanks.
at last installed it! I have to re install though. I restored some of my data and it crashed on me.
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
CAn anyone tell me that , any version of WM5 is fit to Hong Kong User.
yetdy said:
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
Click to expand...
Click to collapse
high what network are you with and are you on contract or pay as you go?
cause i have the settings for o2 contract gprs and also havw the settings for e-mail etc
I'm now able to access my emails. however, MMS is still a problem. Still can't send or receive. I'm using a globe telecom postpaid line here in the philippines. I installed the attached file for the network configuration but still nothing.
Hi, im having major instability problems with radio rom 02.30.21. While I can just re-install my original jamin rom i would like to stay with the AKU2.3 im running but use the older radio version.
Any anyone extract this file and provide me with a copy. Ive looked into how to do this myself but its a little beyond me.
Thanks
Same here
dannyoneill said:
Hi, im having major instability problems with radio rom 02.30.21. While I can just re-install my original jamin rom i would like to stay with the AKU2.3 im running but use the older radio version.
Any anyone extract this file and provide me with a copy. Ive looked into how to do this myself but its a little beyond me.
Thanks
Click to expand...
Click to collapse
Since installing 02.30.21, I have had completely random times where I cannot be reached. My phone will not ring during a call, and I often don't even get a message indicator like I did before, even if the caller left a message.
I am running the Official Jamin ROM, the only thing I've updated is the radio ROM. Would love to downgrade again if someone makes the old ROM available...
Alan
Look on the FTP server
/Prophet/Prophet-roms/RadioRom/
HI all,
I have a ProWave car kit which runs the phone audio through the car radio. I can make a call perfectly but when receiving one I can hear nothing. I can only think that it's some problem with the Bluetooth.
I'm running ROM 1.12.00 WWE, Radio 1.12.10, Protocol Ver 1337.42 and ExtROM 1.12.171 WWE
Cormac
Why start another thread if there is already one with an All-in-one guide in it? Please search first before posting.
The thread that you referred to started by talking about phones modified with Modified/Bigstorage Roms but I never messed with mine and so, didn't read the post any further since I didn't think it was applicable to me.
C
Bluetooth has nothing to do with Big Storage ROM since BS is just a way of making use of the Ext ROM which is invisible by default in shipped ROMs.
In any event my problem still hasn't been solved. I downloaded the patch but no joy. Is the radio ver the part that controls the bluetooth in which case should I upgrade the radio to 1.13 and then run the patch on it ?
C
Yes, BT is within the Radio ROM. What patch are you referring to? I've been using Radio 1.13 for quite some time now without any problems. I never had problems also with Radio 1.12. In both cases I never installed any BT patch.
I installed the "Default_BTHUSB_PATCH_AKU26.CAB" file as referred to in other posts. Can I upgrade the Radio ROM to 1.13 without updating the main Rom ? Where would I find the appropriate ROMs ? Can I get a Radio 1.13 ROM on it's own ?
C
If my memory serves me well, that BT patch was for meant for very early ROMS like 1.06. Yes, the Radio ROM can be upgraded without touching the Main ROM. It's been 2 years since I did an upgrade, I think 3rd party programs already installed and data will be lost because the device must be in bootloader mode to install the radio upgrade. I haven't fully checked but most ROMs can be found in wm-gurus.com (registration required), so it is possible that the stand-alone Radio ROM is ready for download.
unable to install application. Please update your device ROM to the required version before trying again.
TomTom Navigator v6.032 build 8351 (TYTN II)
Duttys_Official_WM6.1_Release
And I have tested with the 2 newest radio roms.
who can help me?
I havn't got any problems. Mine just installed.
Same problem here.
nobody can help us ?
I was also able to install Tom Tom with NO issues. I can only imagine something device specific for you guys. Maybe try re-flashing? And of course don't forget to do a Hard Reset after flashing, before installing anything.
Good luck...I would be lost (literally) without Tom Tom
This has nothing to do with the the problem need instructions as how to use the map I have which is not recognized by tomtom. I have tt home. Where would I install it on the comp so the map gets recognized,
remb0 said:
unable to install application. Please update your device ROM to the required version before trying again.
TomTom Navigator v6.032 build 8351 (TYTN II)
Duttys_Official_WM6.1_Release
And I have tested with the 2 newest radio roms.
who can help me?
Click to expand...
Click to collapse
Go to the file section in my signature, download tt60328351 from the cab file. Copy it to your device and install. I know this one works as I use it and it is the one that came with the stock Kaiser. You must purchase the maps from TomTom.
Nevermind, I got it up and working! thanks anyways
http://rapidshare.com/files/101857345/Apache_Radio_v1.43_Repack.rar
Is there a newer one than 1.43 ?
Thanks, I've been looking all over for this!
I went from 1.27 to 1.41 and then to 1.43 and never noticed any change at
I actually found that using 1.43 caused some stability problems. I also lost the ability to enter SPC codes.
I don't know for sure that it was the cause of these issues, but when I went back to 1.41, they went away.
Can someone point me to where I can download a 1.27? I am at 1.12, but the 1.43 doesn't work. I've got a 1.00 bootloader
reload the factory rom (comes with 1.27) and then update again to whatever upgraded rom you were using.
One guy posted a link to download it via rapidshare. But unless you pay, you will have to wait, can only download one thing at a time, and it is slow and it sucks. I have a link to it using drop.io. It is just like rapidshare meaning you have 100MB for a free account. No registration and you can make as many drops as you want and link them together. An endless supply of drops.
I had Raidio 1.26 and when I upgraded to 6.1 using the BuildOS, my radio wouldn't work most the time. And I couldn't bluetooth or beam anything. But now beam and bluetooth work perfect!
Here is the link. Fast downloads, no waiting. And short URL. http://drop.io/apache143
i had no idea it came with it, i for some reason have 1.00 running on mind and am afraid to change it because i had one bad flash and now it downst get recognized as a apache i have to use the apache noid RUU to flash things but it also when flashes goes to 99% then "fails" but had actually flashed it and the boot pic is the only thing that disaperes i want to flash the radio but dont know if its a good idea and which one to go, does any one know which is better in signal? if it helps i am running my own custom made 6.1 21015 SYS rom
Hi, I have Radio 1.17, I have a HTC Apache and I have two questions.
1. Can I put this version 1.43 to my phone?
2. Do I need to make a hard reset to the phone after the upgrade?, I dont want to loose my information and programs.
3. Actually I have problems with the bluetooth of my phone, I can't use the obex ftp service, do you think the problem will be solved installing this upgrade?
Sorry for my english
Best Regards