HI all,
I have a ProWave car kit which runs the phone audio through the car radio. I can make a call perfectly but when receiving one I can hear nothing. I can only think that it's some problem with the Bluetooth.
I'm running ROM 1.12.00 WWE, Radio 1.12.10, Protocol Ver 1337.42 and ExtROM 1.12.171 WWE
Cormac
Why start another thread if there is already one with an All-in-one guide in it? Please search first before posting.
The thread that you referred to started by talking about phones modified with Modified/Bigstorage Roms but I never messed with mine and so, didn't read the post any further since I didn't think it was applicable to me.
C
Bluetooth has nothing to do with Big Storage ROM since BS is just a way of making use of the Ext ROM which is invisible by default in shipped ROMs.
In any event my problem still hasn't been solved. I downloaded the patch but no joy. Is the radio ver the part that controls the bluetooth in which case should I upgrade the radio to 1.13 and then run the patch on it ?
C
Yes, BT is within the Radio ROM. What patch are you referring to? I've been using Radio 1.13 for quite some time now without any problems. I never had problems also with Radio 1.12. In both cases I never installed any BT patch.
I installed the "Default_BTHUSB_PATCH_AKU26.CAB" file as referred to in other posts. Can I upgrade the Radio ROM to 1.13 without updating the main Rom ? Where would I find the appropriate ROMs ? Can I get a Radio 1.13 ROM on it's own ?
C
If my memory serves me well, that BT patch was for meant for very early ROMS like 1.06. Yes, the Radio ROM can be upgraded without touching the Main ROM. It's been 2 years since I did an upgrade, I think 3rd party programs already installed and data will be lost because the device must be in bootloader mode to install the radio upgrade. I haven't fully checked but most ROMs can be found in wm-gurus.com (registration required), so it is possible that the stand-alone Radio ROM is ready for download.
Related
Lately I've been having a hard time dialing out and picking calls up. Long pauses and nothing happens. This is new for me and my tilt. I have the HTC ROM on it.
I've read around before about some of the radio updates but most people were having serious issues upgrading the radio.
There is a way to JUST update the radio without erasing everything right?
I'll go read now, anything anyone can do to help save me some time would be great.
Thanks
The only radio upgrade I've seen for the Tilt so far is included with the latest AT&T rom floating around on the upgrade forum. Kyphur's XDA-Live 1.x rom is built off of the latest AT&T operator rom, so it includes the latest radio stack that "works" with the Tilt.
There is a version of the radio seperate from a rom available on the forum, but as of right now it only works on roms based off of the AKU 0.4.4. The radio can be flashed to devices running other roms, but you will lose all in-call audio.
I'm sure that the master cooks here are working on porting the radio to other roms, but for now, unless you are willing to flash XDA-Live or another rom built on AKU 0.4.4, you're stuck with the radio you have now.
(Of course if my information is wrong, please correct [not flame] me)
http://rapidshare.com/files/101857345/Apache_Radio_v1.43_Repack.rar
Is there a newer one than 1.43 ?
Thanks, I've been looking all over for this!
I went from 1.27 to 1.41 and then to 1.43 and never noticed any change at
I actually found that using 1.43 caused some stability problems. I also lost the ability to enter SPC codes.
I don't know for sure that it was the cause of these issues, but when I went back to 1.41, they went away.
Can someone point me to where I can download a 1.27? I am at 1.12, but the 1.43 doesn't work. I've got a 1.00 bootloader
reload the factory rom (comes with 1.27) and then update again to whatever upgraded rom you were using.
One guy posted a link to download it via rapidshare. But unless you pay, you will have to wait, can only download one thing at a time, and it is slow and it sucks. I have a link to it using drop.io. It is just like rapidshare meaning you have 100MB for a free account. No registration and you can make as many drops as you want and link them together. An endless supply of drops.
I had Raidio 1.26 and when I upgraded to 6.1 using the BuildOS, my radio wouldn't work most the time. And I couldn't bluetooth or beam anything. But now beam and bluetooth work perfect!
Here is the link. Fast downloads, no waiting. And short URL. http://drop.io/apache143
i had no idea it came with it, i for some reason have 1.00 running on mind and am afraid to change it because i had one bad flash and now it downst get recognized as a apache i have to use the apache noid RUU to flash things but it also when flashes goes to 99% then "fails" but had actually flashed it and the boot pic is the only thing that disaperes i want to flash the radio but dont know if its a good idea and which one to go, does any one know which is better in signal? if it helps i am running my own custom made 6.1 21015 SYS rom
Hi, I have Radio 1.17, I have a HTC Apache and I have two questions.
1. Can I put this version 1.43 to my phone?
2. Do I need to make a hard reset to the phone after the upgrade?, I dont want to loose my information and programs.
3. Actually I have problems with the bluetooth of my phone, I can't use the obex ftp service, do you think the problem will be solved installing this upgrade?
Sorry for my english
Best Regards
Hi there, i'm search all the fourm for Treo750 and find no answer, so finally, I decied to ask.
I new got an Treo750 ATT (Unlocked) and it come with the very rear Radio ROM now which version is 1.17.20.00 (from ROMver 1.16??I don't know)
the problem is, with this radio, i have no internet access and have horriable singal drops, the worest is, it often sleep in to dead(like o2 xda flame).
So, I first tried changed the OS rom, but I flashed all roms all versions--from Offical to wm6.1, no luck...the problem still have.(I kick out the radio rom part from Offical ROM, see below for reason)
I don't know if there is something wrong with the hardware but I do have those steps below:
Flash OS rom, SPL, HardSPL,Radio
ONLY THING THAT I DIDN'T change was the Radio ROM, first I cannot flash it.
it always stucked at 0%, and wait for 45mins, still 0%. I restart the device, reflash the radio less OS rom, startup, and radio don't change, the problem still have....
I tried everything, form offical rom with radio, even the Cheetchunlocker radio patch, SD/ActiveSync. All operation realted to flash the radio will result a hang....
BTW: I'm working in China, and will last for years.... I really have to change the radio to compatible with the China Mobile GSM....
upgraded mda compact iv rom to duttys 3.5a, fone information doesn't say the radio was upgraded, did duttys 3.5a contain a radio upgrade, should i have upgraded the radio first, will uprading the radio wipe out duttys 3.5a is the radio upgrade v1.00.25.05 really needed and how will it help?
If the radio stayed the same after a ROM flash, then chances are that there wasn't an included radio. You can upgrade the radio at any time and if you have no troubles with the current one, just stick with it.
You would have to read his post to see if the radio was included in the rom (you didn't give enough information for me to be able to tell you, i would also have to read on it. every rom is different and differetn for every phone), you can flash a radio by itself if it was not included. If you don't flash the appropriate radio you can have problems with your phone such as: Camera not to work, to have a black screen, to have no sound or intermittent sound. (extreme examples)
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
i was needing this help so much, please help me guys, i tested my chip on another mobile and worked the edge
Be sure to flash Hard SPL before you do anything!!!!!
After you do that, you can go ahead and flash.
If I were you, I'd flash a different radio to see if it works better, I recommend .28, .32, and the .19 test.
If that doesn't work then let us know.
basmareck said:
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
Click to expand...
Click to collapse
I cannot say if your radio is the problem. If you're installing an official HTC or provider ROM, you do not need HardSPL. If you want to install a cooked one here off XDA, you do. This great guide will help you flash a cooked ROM and/or radio: http://forum.xda-developers.com/showthread.php?t=448008
You're right, if you flash a radio, then you will not lose anything in your Storage Memory. If you flash a ROM, you will, so be sure to back up your PIM. PPCPimBackup does a great job for that, you can find it at d0ugie's site: http://blownfuze.org/ Your contacts and calendar should come back right away after the restore, but the messages take a while to rebuild, so don't touch it for at least 15 mins after the reboot.
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
basmareck said:
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
Click to expand...
Click to collapse
By default, you cannot flash anything but an HTC or provider ROM; you cannot flash radios either. You have to flash HardSPL before you flash a custom ROM or a radio.
Have you tried running SSPLManual.exe as outlined in the guide above, step 2 note 2?