hello!
going to spend the 2nd night, trying to flash my magician with bigstorage.
tryed 3 different sd-cards, but got no success to flash via bootloader.
entering bootloader is no problem, but the dialog to flash via sd would never show (tryed all tricks, found here in the forum with no success)
-anybody can help me out?
-is possibly the bootloader 1.02 the cause?
thx in advance
rainer
some people encounterred problems due to their SD card reader. I use a Sandisk without any problems and I have already upgraded my unit many times.
correct!
dumped the cf again with a different cardreader, and it works
sorry, and many thanks!
Related
I have bought cheap m600 on ebay, it is G4 (SPL with *.001), and all works perfect but it didn't seem to recognize any sim card. Allways display invalid sim. I tried different sim cards and always the same problem. Anyway emergency calls still work and I can call 112. Somebody know what colud be wrong?
Anyone has solution for this??
try to unlock the phone. i think it's in the wiki
open & read :
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
SPV M600 Unlock
Im failing to unlock SPV M600, with SPL 2.10.001, using Lokiwiz03a. My problem is in reading the cab files in M600 (Cert_SPCS and EnableRapi) when i transfer them by bluetooth or Memory cad i fail to see them in the phone so that i can run them (this is what its giving me: "Could not update itsutils.dll to the current version, maybe it is in use?")
I have used the method in this thread
http://forum.xda-developers.com/showthread.php?t=404223
yotamui said:
Im failing to unlock SPV M600, with SPL 2.10.001, using Lokiwiz03a. My problem is in reading the cab files in M600 (Cert_SPCS and EnableRapi) when i transfer them by bluetooth or Memory cad i fail to see them in the phone so that i can run them (this is what its giving me: "Could not update itsutils.dll to the current version, maybe it is in use?")
I have used the method in this thread
http://forum.xda-developers.com/showthread.php?t=404223
Click to expand...
Click to collapse
Try and use the cable, rather than bluetooth.
Also, make sure you've checked the "Show All Files" on the devices file explorer (right soft key).
thanks mate. I used the cable but cant locate the files. i cane only locate or run them in the phone if connected to the PC.
Use the batch file from lokiwiz to try and unlock it.
l3v5y said:
Use the batch file from lokiwiz to try and unlock it.
Click to expand...
Click to collapse
Thanks mate, for your affinity to help the world will be a better place with people like you, this worked, after running the batch file it gave an error, i restarted the SPV and i located all the files. theSPV is unlocked now
yotamui said:
Thanks mate, for your affinity to help the world will be a better place with people like you, this worked, after running the batch file it gave an error, i restarted the SPV and i located all the files. theSPV is unlocked now
Click to expand...
Click to collapse
No problem!
Hope it works well now!
If you start flashing ROMs, you will become addicted!
l3v5y said:
No problem!
Hope it works well now!
If you start flashing ROMs, you will become addicted!
Click to expand...
Click to collapse
the phone is working fine, will try the ROM flashing, thanks mate
Hello everyone,
í have a little problem - my qtek s200 usb probably is out of order and i can't connect pocket with pc. so i consider go to service under the guarantee, in mind, that they will fix, but there is the problem - in my device are upgraded to wm6 and free servise is missing. I want to put in it older wm5 version of windows(i have my old wm5 backup file "nk.nbf").
so, does it possible to downgrade my device without usb?
yse you can
there was memory card dump in the ftp site, but you need to unlock CID first I think
I can't help you in this, slow internet connection, but if one can dump you the ROM, you can install it without USB
i'm waiting too the solution
paradis_pal said:
there was memory card dump in the ftp site
Click to expand...
Click to collapse
i can't find thet memory card dump(can jou give me the link?). i found just program for creating backup SD card, but there i need USB connection from device to PC..
the link, I said there was one, I can't find it.
first did you unlock CID, you can't backup the rom into sd image if you didn't unlock CID, and I think you can't restore one without CID unlocked.
you can't put the nk.nbf in the image and restore, it is not that easy
you need to put it in RAW format not fat using the tool psdwrite.exe from (itsutils.dll) but in your case you need to use cardreader to put the bin file, I can't help you and give you the file becasue of the slow and bad internet
just give your device to the service under the guarantee and tell them it hardware problem not software and you installed a theme
is there a way to see if its CID unlocked?
yes ... if you can make a sd-dump or flash all roms with different CIDs... its cid unlocked :->
one more question about dump sd image..
may someone knows how to create that bootable SD from original shipped rom? i'm searching for raw file everythere, but i found nothing..
hello one more time. i want to wake up this thread, becouse one more problem happend to me. so, my one prophet now is absolutly dead.
it's heppend becouse i was updating rom over bluetouch and it stoped with error. it's stocked in htc screen. i could enter bootloader, i could do hard reset, but it's not helping.
so i'm asking one more time, maybe someone have saved his his rom dump image and could share it?
I'm banned now
but I can help, I'll try to upload the bin file
did u unlocked cid?
ca u write it in raw format on the card?
Chopin said:
I'm banned now
but I can help, I'll try to upload the bin file
did u unlocked cid?
ca u write it in raw format on the card?
Click to expand...
Click to collapse
yes, my prophet cid is unlocked. i think i can write raw format on my card, i have 3 types of card readers, so one of them should be able to do that. of course, i need to know which program i should use to put RAW to SD.
thank you for help
STUCK AT BOOT LOADER...can anyone help please...
my i-mate jamin is stuck at boot screen of i-mate with "IPL 2.13.0001", SPL 2.G4.4PDA" and "GSM 02.20.21" on top left of the screen. i tried to update to wm6. i did hardspl and followed the steps. when i remove the battery and turn it on a red, green and blue horizontal lines appear with "IPL 2.13.0001" and "SPL 2.G4.4PDA"...help please.
I have a problem on my HTC HD7. I tried to flash the Rom and the process didn't go well.. Now on the bootmanager (colored screen) is not written serial or usb in the bottom and my PC doesn't recognise it in this mode, but zune recognise it when it's Turned on. How can I solve that problem?
P.S. I had another problem, my device rebooted automatically sometimes.. And it show me a message "Storage card did non work"
Thank you
Franci4396
Were you trying to flash a custom ROM? There's a very clear warning on the RSPL program not to use it on bootloader (SPL) versions 4 or greater. It sounds like you had version 4, based ont eh error you report...
The best way that I know of to fix the problem is GoldCard, though installing an official update CAB that includes a new bootloader (basically, any HTC firmware CAB for your phone) has been reported to work too.
The "storage card" error sounds like there's a problem with the internal microSD that the HD7 uses to store data. They come loose sometimes. You can replace that card, but getting to it without voiding your phone's warranty is difficult. If you're already out of warranty, though, it's not too hard if you have a set of small screwdrivers.
Can you give me a goldcard cab site??
For either GoldCard or a suitable update CAB (they are *not* the same thing), search the dev&hacking sub-forum. You'll need an OEM CAB that is for your phone and newer than your current firmware, if you want to go that route. Note, however, that it will lock your bootloader down even more. You can't flash right now anyhow, so unless you just want to flash a stock ROM I wouldn't bother fixing the bootloader that way.
Hello guys,
I have been trying to unlock my HTC Radar ( C110e ) for almost 4 days now . So i thought whether im the only unlucky person not able to do so or anyone else also have trouble installing the HSPL into their mobiles.
Thanks!
About the easiest thing i've ever done with a smartphone
If u want helps, give us some more detail
barclays said:
About the easiest thing i've ever done with a smartphone
If u want helps, give us some more detail
Click to expand...
Click to collapse
well I tried to install HSPL through RUU provided by DFT . Failed. so had to make the gold card, stuck in this for eternity now the phone reads *Enter USB Host mode..* but nothing happens. Tried changing the Y-Cable setup , ensured that the USB reader is Powered on , tried changing the memory cards ( 2gb SD card , 4 gb ones ) and also tried changing the card reader. Nothing at all happens, still the same !! Well mine is unbranded phone ( i hope it means i can put any sim into it ) here is my phone info ( may be useful ) :
PI06100
SPL-2.1.160015.3(133510)
eMMC SMS 7376MB, FA31
TOUCH A1(F:80,ID:10,V20,B:AA)
Radio-16.23.03.17
and attached pics.. already posted it in two topics here but none could help . and i cant find anything wrong . I hope some one helps . A bit Frustrated
are u sure goldcard is done right? looks like it doesnt recognize the microSD as a goldcard
http://forum.xda-developers.com/showthread.php?t=1295068
barclays said:
are u sure goldcard is done right? looks like it doesnt recognize the microSD as a goldcard
http://forum.xda-developers.com/showthread.php?t=1295068
Click to expand...
Click to collapse
I tried the Gold card method from here : [Noob-friendly] Goldcard SPL Downgrade Method; No Android-Phone and/or custom wires!
and put OMEGIMG.nbh file from DFT HSPL's thread into it ( around 24mb file ) and made the gold card
I have an HTC HD7 and It's on SPL 5.11.2250.0, and I want to try out the WP7.8 ROM on it. I've never actually flashed my device before, so I'm a bit new to this.
I'm aware I need to downgrade the SPL first, but the tutorials I have found are all for 5.10, and I can't find any for 5.11.
Thanks, Alex.
Xerax said:
I have an HTC HD7 and It's on SPL 5.11.2250.0, and I want to try out the WP7.8 ROM on it. I've never actually flashed my device before, so I'm a bit new to this.
I'm aware I need to downgrade the SPL first, but the tutorials I have found are all for 5.10, and I can't find any for 5.11.
Thanks, Alex.
Click to expand...
Click to collapse
The tutorials for the SPL 5.10 are for all SPL 5.xxx in general and will work for you.
The steps to install a custom rom are - Downgrade the SPL to at or below 3.xxx (which is required to install RSPL/HSPL) download and install RSPL/HSPL by DFT and then download and install a custom rom of your choice.
There are basically only 3 methods available for downgrading 5.xxx
1. Goldcard/ Y cable method - Requires a Y cable, (female too 2 male USB cable) either purchased or home made, SD card reader and a 1gb to
4gb SD card (larger cards will work but need to be formatted to FAT32 and partitioned) or a flash drive. Card reader works better though.
Download Goldcard tool and stock/shipped Pre-NoDo/NoDo rom.
2. Zune restore point by Zubair - Restore your device through Zune. Only works if you updated your device from a Pre-Mango state to Mango and still have the PC that you used to do it on. When you restore the device it doesn't change the SPL, it changes the SPL when you re-update your device through Zune thought. The key point is the device will restart twice when it installs Mango, once to change the SPL to 4.xxx and once to install Mango and at this point you have to stop the update before it installs the next update which is which he HTC Firmware Update or your SPL will be changed to 5.xxx again. One the device is on 4.xxx just follow the tutorial for downgrading 4.xxx
3. SLSPL by Ansar - Work on Europe devices with Firmware Revision Number ending in.401 and can work on TMobile devices that are SIM unlocked.
Just follow Shadows step by step tutorial on downgrading SPL, flashing XSPL and installing a custom rom. All the links for the above methods are listed in the downgrading SPL 5.xxx and it also has all the stock/shipped rom links and the link for RSPL/HSPL.
http://forum.xda-developers.com/showthread.php?t=1295068
If you have any questions or problems just let me know!
Hi, i tried the gold card method! I've only tried it with a usb hub instead of the cable to y, do you think this does not make me start the downgrade? the phone is in fact doing research on the combination button camera + vol-+ power and go into the screen usb host mode and remains so even if the appearance 3/5 minutes ... then I say wait a t-flash usb to micro sd instead of the Micro SD card reader, do you think one of 2 things is the cause? or all 2? let me know if you know anything thanks!