Hello everyone,
í have a little problem - my qtek s200 usb probably is out of order and i can't connect pocket with pc. so i consider go to service under the guarantee, in mind, that they will fix, but there is the problem - in my device are upgraded to wm6 and free servise is missing. I want to put in it older wm5 version of windows(i have my old wm5 backup file "nk.nbf").
so, does it possible to downgrade my device without usb?
yse you can
there was memory card dump in the ftp site, but you need to unlock CID first I think
I can't help you in this, slow internet connection, but if one can dump you the ROM, you can install it without USB
i'm waiting too the solution
paradis_pal said:
there was memory card dump in the ftp site
Click to expand...
Click to collapse
i can't find thet memory card dump(can jou give me the link?). i found just program for creating backup SD card, but there i need USB connection from device to PC..
the link, I said there was one, I can't find it.
first did you unlock CID, you can't backup the rom into sd image if you didn't unlock CID, and I think you can't restore one without CID unlocked.
you can't put the nk.nbf in the image and restore, it is not that easy
you need to put it in RAW format not fat using the tool psdwrite.exe from (itsutils.dll) but in your case you need to use cardreader to put the bin file, I can't help you and give you the file becasue of the slow and bad internet
just give your device to the service under the guarantee and tell them it hardware problem not software and you installed a theme
is there a way to see if its CID unlocked?
yes ... if you can make a sd-dump or flash all roms with different CIDs... its cid unlocked :->
one more question about dump sd image..
may someone knows how to create that bootable SD from original shipped rom? i'm searching for raw file everythere, but i found nothing..
hello one more time. i want to wake up this thread, becouse one more problem happend to me. so, my one prophet now is absolutly dead.
it's heppend becouse i was updating rom over bluetouch and it stoped with error. it's stocked in htc screen. i could enter bootloader, i could do hard reset, but it's not helping.
so i'm asking one more time, maybe someone have saved his his rom dump image and could share it?
I'm banned now
but I can help, I'll try to upload the bin file
did u unlocked cid?
ca u write it in raw format on the card?
Chopin said:
I'm banned now
but I can help, I'll try to upload the bin file
did u unlocked cid?
ca u write it in raw format on the card?
Click to expand...
Click to collapse
yes, my prophet cid is unlocked. i think i can write raw format on my card, i have 3 types of card readers, so one of them should be able to do that. of course, i need to know which program i should use to put RAW to SD.
thank you for help
STUCK AT BOOT LOADER...can anyone help please...
my i-mate jamin is stuck at boot screen of i-mate with "IPL 2.13.0001", SPL 2.G4.4PDA" and "GSM 02.20.21" on top left of the screen. i tried to update to wm6. i did hardspl and followed the steps. when i remove the battery and turn it on a red, green and blue horizontal lines appear with "IPL 2.13.0001" and "SPL 2.G4.4PDA"...help please.
Related
HI all
i have a qtek_S200(HTC Prophet) which is :
IPL 2.09.0001
SPL 2.15.0001
OS 2.15.13.24
GSM 02.17.21
now,i have experienced a big problem like this:
i wanted to change the ROM of my phone to English..then i download a shiped Rom to flash it...
the shiped Rom i used was RUU_Prophet_1001321_100013102_11320_DopodAsia_shiped.exe....
But everytime i tried to Flash, the program said "ERROR(300):invalid update tool..this update utility cannot be used for your PDA phone.please get newer update utillity" when the phone proceeded to a reseting and turned to three colour mode....
So, that is way? someone plz help me..
ThX
jimmy
2nd problem
the qtek S200 is CHT now, coz it ought to be ENG originallly, so it must be CID unlocked sometime ago...
unfortunlly, when i try to backup its Rom to SD card using MTTY by the code" r2sd all", like backing up a wizard' rom....but it said "you don't get the proper security level to download a specific image"..
Then i use the MachinaGod' lokiwizi and RapiUnlocker trying to unlock the CID, but it displays error and seems fail ..
so, guys plz help me ..
THX
jimmy
UP
Guys please help me
another: HOw to dump a ROM of Qtek s200(prophet)?
Hi,guys..
HOw to dump a ROM of Qtek s200(prophet)?
i tried to dump it's Rom using a MTTY, the code i input was " r2sd all", but it said that
Code:
r2sd all
*****user area size=0x77E0000 Bytes
R2SDBackup0-Download type=5
usTotalBlock=1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
So it is fail......
i want to backup it's Rom, then flash it onto other Prophet ...
Anyone pLz teach me how to do...
THX
jimmy
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
thefamous said:
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
Click to expand...
Click to collapse
i have tried but it is no use..
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Rymez2K said:
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Click to expand...
Click to collapse
hi ..thx for your help.
but..how to downgrade to JAMin_WWE_1000925_10009114_11420_ship.exe ? and what a hacked version of the rom update utility i can use? i mean expect JMFWM(the one need money.i don't like it).
can you please show me the detail steps...thank you very much.!
jimmy
jimmy80,
Have you try as discussed in this thread: http://forum.xda-developers.com/viewtopic.php?t=49298
I have bought cheap m600 on ebay, it is G4 (SPL with *.001), and all works perfect but it didn't seem to recognize any sim card. Allways display invalid sim. I tried different sim cards and always the same problem. Anyway emergency calls still work and I can call 112. Somebody know what colud be wrong?
Anyone has solution for this??
try to unlock the phone. i think it's in the wiki
open & read :
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
SPV M600 Unlock
Im failing to unlock SPV M600, with SPL 2.10.001, using Lokiwiz03a. My problem is in reading the cab files in M600 (Cert_SPCS and EnableRapi) when i transfer them by bluetooth or Memory cad i fail to see them in the phone so that i can run them (this is what its giving me: "Could not update itsutils.dll to the current version, maybe it is in use?")
I have used the method in this thread
http://forum.xda-developers.com/showthread.php?t=404223
yotamui said:
Im failing to unlock SPV M600, with SPL 2.10.001, using Lokiwiz03a. My problem is in reading the cab files in M600 (Cert_SPCS and EnableRapi) when i transfer them by bluetooth or Memory cad i fail to see them in the phone so that i can run them (this is what its giving me: "Could not update itsutils.dll to the current version, maybe it is in use?")
I have used the method in this thread
http://forum.xda-developers.com/showthread.php?t=404223
Click to expand...
Click to collapse
Try and use the cable, rather than bluetooth.
Also, make sure you've checked the "Show All Files" on the devices file explorer (right soft key).
thanks mate. I used the cable but cant locate the files. i cane only locate or run them in the phone if connected to the PC.
Use the batch file from lokiwiz to try and unlock it.
l3v5y said:
Use the batch file from lokiwiz to try and unlock it.
Click to expand...
Click to collapse
Thanks mate, for your affinity to help the world will be a better place with people like you, this worked, after running the batch file it gave an error, i restarted the SPV and i located all the files. theSPV is unlocked now
yotamui said:
Thanks mate, for your affinity to help the world will be a better place with people like you, this worked, after running the batch file it gave an error, i restarted the SPV and i located all the files. theSPV is unlocked now
Click to expand...
Click to collapse
No problem!
Hope it works well now!
If you start flashing ROMs, you will become addicted!
l3v5y said:
No problem!
Hope it works well now!
If you start flashing ROMs, you will become addicted!
Click to expand...
Click to collapse
the phone is working fine, will try the ROM flashing, thanks mate
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
Hi there,
I have bricked my vox whilst flashing it using Jocky's USPL utility, the cable fell out and now all that the vox will do is boot up to the HTC splash screen and then hang.
I can get the phone to the bootloader screen but I can't flash a new ROM as it is previously a Vodafone branded v1415 so I get Invalid Vender ID no matter what ROM I use.
I guess I need the official VF UK one but I have searched the web for hours now and I am unable to source it.
Is it possible to get round the Invalid Vender ID in any way from the bootloader screen as I obviously can't boot it to be able to use the SDA unlocker.
Any information would be greatly appreciated.
Thanks
Bunter12345
I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software
matrix77 said:
I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software
Click to expand...
Click to collapse
Hi there,
Still get the same invalid vendor id with that rom as well unfortunately, thanks for your help though.
did u find any solution as i have the same problem
mrushabh said:
did u find any solution as i have the same problem
Click to expand...
Click to collapse
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Or what about flashing the new SPL while in Bootloader with a RUU? But be aware i do not know if that could brick your device forever..
Da9L said:
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Click to expand...
Click to collapse
This is complete bull****. In another thread I already once explained that this doesn't work.
Hi
Please help me my HTC Desire S stuck on fastboot and bootloader after change the hboot to 0.98.0000 s-on
i cant using adb to change the hboot ;(
i cant install my official rom ruu htc saga ara 1.36.415.1 ;( error 140 i dont know why my current rom 1.47.415.1 and i did that before
i cant install ruu htc saga europe 2.10.401.5 ;( error 131
i cant create goldcard cuz i dont know the sd card cid "i cant using adb on fastboot"
Plz tell me what can i do???
Well, I'm not sure there is a lot to do when you're S-ON. But I would give Android Flasher a try. It worked for me, even if adb couldn't recognize my phone.
Thanx my friend i will try it
Android flasher doesnt work with hboot S-ON.
U can make gold card on other android device. And then, u can run RUU Europe 1.28.
If you can't, you can take to Services or S-OFF by XTC-clip
I had the same problem, but do not dispair you can fix this.
Obviously one point you have missed on the whole goldcard thing is that you dont have to use ADB or your bricked phone to find out the CID, put it into a card reader and use your PC. So onto making yourself a goldcard.
The process of creating one is rather hit and miss, but I eventually got one to work. Make sure you use an MicroSD card that is 2GB or smaller as any larger than this and it's a SDHC card and wont work. I used a old 1GB Sandisk card my girlfriend had spare. Have a look on the forums for a goldcard.exe file to run on windows to simplify the process, I found this worked when the forum described method did not. Keep trying with this as it took me many attempts to get a working goldcard.
From your post it sounds like you want to install the cool new Android 2.3.5 with Sense 3.0. Your problem is your phone will not take the European RUU 2.10.401.5 as your phone is from another region - 1.47.415.1 (india?) and got screwed up in the process. The bold part of the software version number relates to region. Mine was from Thailand and the european update worked when installed with my goldcard.
When you have your goldcard created you need to extract the ROM.zip file from the RUU (just run the exe and look in your PCs temp directory whilst the exe is open, it unpacks itself there) and then rename this to PG88IMG.zip. Put this file onto your goldcard and then power on your Desire S whilst holding the Vol. down button.
If you still get errors like 130 or 140 your goldcard is not made correctly, so try again.
Once you have the new update working take yourself to htcdev.com and unlock the bootloader, then you can flash CWM recovery and root it as well.
Hope this helps
thanxxxxxxxxx all really i miss these solutions because i was very confuse
thanx again for all i will try it and give u my feedback
traysteel said:
Make sure you use an MicroSD card that is 2GB or smaller as any larger than this and it's a SDHC card and wont work.
Click to expand...
Click to collapse
One tiny correction on this part, I use a 16GB SanDisk Class 6 GoldCard. Means its an SDHC and I haven't had any problems with it.