Hello:
I have SPB time and recently the alarms seem to have stopped working.
They work if I place a test alarm in the afternoon for example, but the ones in the morning to wake me up for work never go off.
I have tried, wakeupteak, and scarybears check notify, to no avail, I have re-installed SPB time and the alarms. I have rebuilt my unit from the ground up. Still the same problem!!
SPB time are out of ideas themselves.
Any ideas on what the problem may be, or can someone suggest an alternative clock/alarm program for the PPC for me to try.
Thanks.
Aame problem here. AlarmX from MTUX seems to work but it's not as pretty.
There are posts on the forum somewhere telling why this is. It's something like the device goes in to sleep mode (excuse the pun). The built in alarm works Ok (for me) and so does the alarm in Stop Time.
I've had problems with alarms for almost two years - I've found only two solutions:
Try SuperAlert from WhittakerMoore - it cured my alarm problems except when I had stuff which clashed with it, however it is commercial.
A more recent and radical approach which has also worked for me is as follows (you will need software which can modify the Notifications database, such as Anton Tomov's Pocket Mechanic).
The root of the problem is the CALNOT process which runs at midnight - it performs housekeeping and if it doesn't complete correctly, it fails to trigger the first alarm of the day (and therefore any subsequent ones until you turn the device on).
Use your product of choice to simply delete the midnight notification entry which runs CALNOT.exe - this means that the housekeeping isn't done every night but the alarms will be reliable, since it now cannot fail to complete(!). To make sure the cleanup does occur now and again, put a shortcut to CALNOT.exe in the startup folder. Yes, it makes startup after a soft reset a little slower but it's worth it I feel for reliable alarms. Alternatively you could run CALNOT manually. You must remember to remove the CALNOT notification after each time it runs (including timezone changes) as it reinstates its midnight entry each time.
Although I have over 350 entries in my calendar, I haven't noticed any degradation without the regular housekeeping but I have noticed the alarms working - it now wakes me every morning except when I forget to delete the damned entry after a soft reset.
Let me know how you get on.
Note: If anyone out there wants to knock together a tiny app. which runs CALNOT then removes the notification, I for one would be very grateful - I haven't had the time to do any WM coding yet.
I almost missed a plane because the alarm didn't ring so it's important to fix it. However:
simply delete the midnight notification entry which runs CALNOT.exe
Click to expand...
Click to collapse
how to find this program?
I searched at "calnot.exe" in the registry: nopes, searched in windows/startup: nopes. So how to find the program that calls calnot.exe to delete it? Or just delete the file calnot.exe?
Please help
henk-jan said:
how to find this program?
I searched at "calnot.exe" in the registry: nopes, searched in windows/startup: nopes. So how to find the program that calls calnot.exe to delete it? Or just delete the file calnot.exe?
Click to expand...
Click to collapse
mtbsoft said:
(you will need software which can modify the Notifications database, such as Anton Tomov's Pocket Mechanic).
...
Use your product of choice to simply delete the midnight notification entry which runs CALNOT.exe
Click to expand...
Click to collapse
Do NOT delete the program calnot.exe! Re-read what I wrote, in particular the need for software to edit the notifications database - THAT is where the entry is which needs to be deleted.
Do not quickly skim across the post details, getting half the picture then blindly blundering around in your device - that is the fast way to a hard reset!
Thanks for the quick reply. I didn't read it well, indeed, sorry.
So I deleted calnot from the notication queue and now it has to be fixed, apart from running calnot now and then? Do you (after a run) have to delete calnot again from the queue?
No worries, I just didn't want to be the cause of a hard reset.
Generally running calnot doesn't seem to restore the notification entry, there is a special system notification entry (which I don't recommend you delete) which restores it at each soft reset.
Good luck and let us know how you get on.
@mtbsoft. Thanks for you're warning. But now I have some troubble with calnot.exe : can't copy/shortcut it to startmenu as you mentioned, can't even rename the read only status and can't run it (i.e. after double clicking I don't see it in the notification database appear). Any sugestions?
Tapping on it will run it - it doesn't have a user interface so won't be visible. I think you've misunderstood about the notification - running calnot.exe manually WON'T put the notification back, that only occurs when you soft-reset.
I assume you are using the in-built File Explorer, you should be able to navigate to calnot.exe then tap and hold to select Copy. Now go to the \windows\startup folder and use the Edit menu at the bottom left to select Paste as Shortcut. calnot.exe is actually in ROM so you can't rename or delete it (easily).
It worked! I tried it several times like you described, but got the message it was in use, or something like that. But now it's ok. Thanks a lot, the alarms seems to work properly.
@mtbsoft: I found a program/tweak that may solve the problem. It's free.
Look at http://www.pocketpcfreewares.com/en/index.php for wakeup tweak
All wakeup tweak does (to my recollection) is adjusts the Power up timeout that so many others also do - the results are variable and it doesn't work for me. I actually found a better solution in the shape of SuperAlert from www.whittakermoore.com - finally 100% reliable.
I didn't no, learnt again something. I'll give it a try. Thanks
Related
Hello @ all,
I have often problems with reminders, too, as posted by others before. When phone is resetted, the reminders drive me to hell. I tried check notification, but I am not able to get this again workin normal...
Check notification seems not to work properly, or probably I am doing something wrong... When I hit in the options delete duplicate reminders, nothing happens. When I then hit "clear", all my reminders are deleted...
But now, I have another issue: Reminders are not stoppable because there does not appear the info where i can dismiss it...
It's very poor for MS, that this problem exists since OS 2003 and seems to be still in WM6...
Hope that someon has some hitns for me...
the best solution is memmaid (www.dinarsoft.com), but it's not free
Hi zoki!
Thanks for your answer. That too is new to me... I'll give it a try, there's a 15 das limited trial available...
dbsoundz said:
Hi zoki!
Thanks for your answer. That too is new to me... I'll give it a try, there's a 15 das limited trial available...
Click to expand...
Click to collapse
I'll second Memmaid. This tool is great for cleaning stuff up (bad notifications, bad links, etc).
I installed it and had a look on it...
In the notification queue I see hundreds of reminders. Its OK, I am using my calendar very intensive...
So, I searched for duplicated items (is that really the problem for my issue?!). Found two, deleted them, restarted my nice phone, and again: my phone reminds me for i dont know, 5 to 10 notifications at one time. sounds nice, when two rings are ringing at one time but it nerves...
what can I do to solve my probelm with this tool?!
so, I have many items there:
calendar.exe
clock.exe (more than three!). I think that there's the problem?! I would say only three should be there...?!
for following items i have no clue what they are,...
tmail.exe
calupd.exe
sqmevent.exe
enrollnot.exe
\\.\Notifications\NamedEvents\SCRIPT:0x0
clocknot.exe
repllog.exe
calnot.exe
Reminders problem
OK, I don't use reminders, but try this: Turn off notifications before resetting your device. I don't remember if there is a setting in the calendar program for this, as I use pocket informant, but probably there is. Then, after resetting, turn them back on. This might at least stop it reminding you about past events. If this doesn't work, you can try turning them off in the "Sounds and Notifications" program in the Settings folder. Then turn them back on after resetting.
Good luck,
I don't think this will solve dbsoundz's problems. I had the same thing yesterday morning, my alarm woke me up on the normal programmed time, but there's no button to dismiss it. Even switching of the alarm doesn't work, it keeps up going. Only by hard-reset I was able to solve this.
Thanks for discussion...
what have I done: I deleted all the items with "clock.exe". After that, my phone was not again ringing wild on phone startup . So far so good.
But:
the problem with the missing notification of reminders still exists
hm... it still rings once on startup. but the ringtone is another then edited in the sound settings under "reminders"... but thank god, no ringing orchestra any more... and still w/o "dismiss"-notification
It sounds to me like a time zone problem! Try going to a different time zone let it chnage and then wait a couple of secs and chnage back!
Hi funman,
thanks for your reply.
I tried your suggestion. but it didn't help. Same problems as before. I was also sceptical about that, because I don't think that there's the problem. As described, the phone makes still a ring orchestra at start up and the reminders are totally different from settings in the sounds/notification settings... very strange. And there's still no notification baloon where I could "dismiss" it...
OMG, thats really bad news I red today! Smart1 will not release a v3! Your WM6 v2 is close to perfect, just some small bugs left to perfection. Whatever may happen, I wanna thank you for this first: GOOD WORK!!!
I may not have posted alot until now, since I prefer reading first, digging into it, then posting. I´m still pretty new to PPC world (compared to those who live in here..), and I don´t want to spam and pollute.
Now someone asked for list of bugs in smart1 WM6 v2 to fix them / cook a new ROM based on it, so I step in because these bugs are something I know about - sadly.
Maybe you smart1 could give all the files needed to build it to him, to make shure things dont get messed up on rebuilding? Don´t know how this is handled in here.
BUGLIST:
Bugs I have myself & they are confirmed:
- Backlight switches OFF after Softreset (really bad at night..)
- PIN to access device gets corrupted on Softresets (-> cant use device with PIN enabled edit: Installing radio ROM 2.61.29 has been reported to fix this bug, I will NOT test this.)
- Email Password gets lost after SoftReset (reenter on boot)
- IR not working (did not check manual reg fix avail.)
- WLAN in Comm Manager does not always switch ON/OFF propper, does not switch ON after several tries
- Delay of 0.5-1 sec on most Softkeys (1/2, Green, Red) + 1 & 2 cant be reasigned without problems (cab)
- second incoming calls screen never appear + no missed calls record in call history. (never tried, but as workaround I suggest disablin the feature at your cellular provider. edit: Installing radio ROM 2.61.29 has been reported to fix this bug, I will test this.)
- GRPS Connections do not intialize propper after Softreset. After opening Connection Settings once (like editing them, then OK) all works fine until next Softreset.
- Links inside emails produce an error
Bugs I dont have myself but confirmed
- Earphone speaker too loud eventhough already set to the lowest volume. Mic volume too soft as claimed by other party during conversation. (fine here, maybe depending on G3/4 or model)
- Incoming MMS does not work.Outgoing does work. (Cant confirm, hate $$$ MMS)
- the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer.
Bugs I have myself but not shure if confirmed:
- Could not get Internet Telephonie (SIP) working, may be wrong settings
- Sometimes dialing a contact does not work (from some views/windows). Will check the circumstances
Bugs some people have but not confirmed so far:
- MobileCalculator.exe not starting (works fine here)
- Pocket Outlook (Messages) does not start after a while (had this once, guess its some inteference with other soft)
- If you want to mark a task as complete or make a new task, you receive an error "not enough memory to complete the task, etc". If you click on complete (left button below screen), it marks the task as complete, but when you leave the application the task is not gone. When you enter tasks again, the task is still there.This happens too in the pdamobiz v1.00 rom. (I can not confirm this at all.)
- the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer. (not completly wrong, in general sofkeys lag)
- System sounds (click, msgbox etc) go off sometimes, a soft reset gets them back (had once, someone else confim please)
from 18.04.07:
- Display is not kept opp when pressing the power-button slightly once. Some program forces it to turn on back-light, which makes the touch-screen active again. Active touch-screen in a pocket is a very bad combination (I dont get this. Get opp?? Why not just lock device or use Mortsaver)
- The phone turns itself on frequently throughout the day when you have an Exchange email account. This is confirmed after a hard reset, and doesn't happen until the Exchange account is entered. (Guess Mortsaver could be used as workaround as long as not fixed.)
- BUG: The text or font cannot be changed in Outlook Mobile. Attempting to change the size of the text to bigger or smaller does nothing. (Uhm, does WM 6 support HTML mails at all? I don´t need it, if i need formated text i attach it)
- Ringing disappear from time to time (not sms). Screen still go on from time to time when display off(even on a clean hardreset).
(BTW; Since i have SmartV2, the extended rom does not install automatically.
I Confirm these bugs:
----------------------------------------------------------------
To get a clean & bugfree WM6 on prophet (maybe) I suggest following system:
- Everybody reads the whole tread before he / she starts posting
- Everybody thinks twice before posting if the post matches the topic
(Smart1 v2 Bug Collection - not: How to flash ROM or Please add finnish language.)
- Everybody posts bugs that are not already known .
- Everybody confirms bugs if they where not confirmed once
- Everybody falsifies bugs if they do not appear on their device
- Everybody posts tested solutions to confirmed bugs
- Nobody posts requests or problems with flashing or any other BS
- Nobody quotes complete posts just to add a single line
I will read this tread and update this post to collect all known bugs into this single post. I hope some mods keep an eye on this tread and keep it clean from "I have a problem and I am to lazy to read - PLEEEASE HELP ASAP" posts. Excuse me if this sounds a bit rude, but I just red trough 90 pages of the smart1 tread....
Even if we can`t cook ourselfs we can still judge the taste...
Please keep this post clean!!!
A
bug I find: afetr using some time, the messeage can't be used!
thanks
Problems happened to my prophet
1. Earphone speaker too loud eventhough already set to the lowest volume. Mic volume too soft as claimed by other party during conversation.
2. second incoming calls screen never appear + no missed calls record in call history.
Bug with tasks?
I have only one complaint and this is about tasks.
If I want to mark a task as complete or make a new task, I receive an error "not enough memory to complete the task, etc". If you click on complete (left button below screen), it marks the task as complete, but when you leave the application the task is not gone. When you enter tasks again, the task is still there.This happens too in the pdamobiz v1.00 rom.
I don't know if this could help others.. I had the same problems as you other guys in this thread with the phone part. (No missed calls list, PIN to access device gets corrupted on Softresets).
If i then flashed firts to NVID of WM5 rom, then to Smart1's WM6 V2 and after that i flashed to the radio rom of version 2.61.29.. Then those problems dissapeared for me.. I have a full call history list, and the phone does ask me for PIN everytime i soft reset! I haven't had these problems at all after i did this.
Bugs I have myself but not shure if confirmed:
- GRPS Connections do not intialize propper after Softreset. After opening Connection Settings once (like editing them, then OK) all works fine until next Softreset.
Click to expand...
Click to collapse
I can confirm that! I have the same problem!
Grt Rom, just a few glitches.
1) the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer.
2) System sounds (click, msgbox etc) go off sometimes, a soft reset gets them back
Can live with the above 2 problems, other than that i think its a fabulous rom, quite slick and quick. Hope someone can pick up where Smart1 left off.
Turns itself on with an Exchange email account
OK. Scratch the title of this post.
The problem exists when a PIN is used with the 'Lock' applet in Settings -> Personal -> Lock. When you have a PIN set to be required at startup, the phone will at times turn on by itself. Also, if you let the phone sit by itself for a few minutes, you will be able to turn it on with the 'end call' button! I have repeated this after several hard resets with no apps installed.
I originally thought an Exchange account created this problem because my hosted Exchange provider requires a PIN to be setup for the phone to communicate with the Exchange server. But, I know the Exchange account has nothing to do with the problem.
BUGS
BUGS
RINGING
Sometimes the phone does not ring as normal (sms do notify!), it displays only on screen without making any sound, not even vibration.
Happened once after weeks of usage:
SYNCRONIZING
Syncing with laptop not successfull. After all my calendar, contacts, to-do and task were deleted on unit. After that ActiveSync does not want to syncronize with phone anymore. Not even after deleting and creating a new partnership. The unit keep changing its ID; WM_Administrator1, 4, 6 etc.
Hardreset and reinstall of AS4.5 so far works.
GENERAL
*Display is not kept off when pressing the power-button slightly once. Some program forces it to turn on back-light, which makes the touch-screen active again. Active touch-screen in a pocket is a very bad combination. I dont use any exchange-account.
*Fast battery draining (tried every radio-rom, now running 2.07.20)
More bugs
And ofcourse;
Incoming MMS does not work. (outgoing does work!)
bongachalla said:
BUGS
GENERAL
*Display is not kept opp when pressing the power-button slightly once. Some program forces it to turn on back-light, which makes the touch-screen active again. Active touch-screen in a pocket is a very bad combination
Click to expand...
Click to collapse
For me, this is the biggest drawback. Which apps do have installed, and have you tested them to determine which app might be involved in turning the device on by itself?
I have also noticed that I can even get the device to turn on with the end call button at times...
Do you have an Exchange email account?
EDIT18th Apr-07 08:48 (GMT+1):
BUGS
Still no incoming MMS, Ringing disappear from time to time (not sms). Screen still go on from time to time when display off(even on a clean hardreset).
Have not been able to reproduce contacts/calendar deletion via sync yet (it appeared after some weeks last time, fresh install now only 3 days)
(BTW; Since i have SmartV2, the extended rom does not install automatically. I therefore have installed the cab-files in folder "\extended_rom\" manually via total commander. If that has something to do with it)
I Confirm these bugs:
Earphone speaker too loud eventhough already set to the lowest volume.
- the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer.
Wow, amazing how fast this gets confusing. People please try to keep it clean!!!
If you find out something is not caused by the ROM itself (like Bongachalla just did), please edit your previous posts and delete these Bug reports.
As far as I understand Bongachalla had 4 Bugs (no MMS receiving, No Ringing from time to time, Sync deleted all contacts on PPC and Touchscreen activating by programs (check our Mortsaver for this btw.)).
Did all of these bugs disappear after your reinstall or what?
Please try to be exact with your bug reports and check if they appear with a clean installed ROM before you post them. Please search on board if there is a fix for them and post solution together with report if you find some. If you get any error message google it to find out what causes it.
This helps us all and raises the chances that someone will take the time to build a rom with bugs fixed. Thx.
BUG: The text or font cannot be changed in Outlook Mobile. Attempting to change the size of the text to bigger or smaller does nothing.
No more bugs?
Maybe you did read the original Smart1 tread, so you know he revived his S200 and announced release of v3 in the next weeks. So I guess its time to post any unknown bugs and confirm the known ones, so they can be fixed in this (I guess final)release.
Thank you for your help.
Updated
(- Links in Emails produce an error)
Look here
http://forum.xda-developers.com/showthread.php?p=1200532&highlight=defbrowser#post1200532
Meierhans said:
Updated
(- Links in Emails produce an error)
Click to expand...
Click to collapse
Another bug not yeat reported
I've looked every where and didn't found anything related with this bug.
My sms just get erased from the Text Messages folder each time I do a soft reset.
using smart1_wm6_pp8mb_NEW.v2 and the Prophet_G3_G4_RadioRom_v2.61.21, followed the instructions and runned all the cabs in the extended_rom.
Did i do anything wrong or is this really a bug
No bug ... its a config of the SMS store!
I dont want to spamn this post, so can you just redirect me to the instructions on how to change that? so when i do a reboot, the sms dont get lost? sorry for the off topic([email protected])
You can't change it! If you reset with your stylus you will probably loose messages.
Use pxshut or similar or turn off (hold power for three seconds)
The reset hole is for emergencies only. This is discussed in great detail in the Fantastic 1.1 thread and the Smartv2 thread.
ex3cut3 said:
I dont want to spamn this post, so can you just redirect me to the instructions on how to change that? so when i do a reboot, the sms dont get lost? sorry for the off topic([email protected])
Click to expand...
Click to collapse
i have tried the fake server method and setting to manual- didnt work
tried the disabling replog.exe using memmaid didnt work
tried unchecking change time auto in phone settings - didnt work
i tried deleting poutlook.exe from startup- didnt work
tried the reg edit of activesync mentioned earlier changing from 5 to 0 - didnt work
my god. i even installed quickmenu and hit its setting to turn off activesync
it still starts!!!
what else is possible??
Same here and it's darned annoying!
Anyone have a solution??
one more here
if you use fdcsoft task manager and go into notifications look for the repllog.exe that states "Event: The system time change" (for me its the one in the middle of the three) and disable that.
hieu2ueih said:
if you use fdcsoft task manager and go into notifications look for the repllog.exe that states "Event: The system time change" (for me its the one in the middle of the three) and disable that.
Click to expand...
Click to collapse
But you have to enable it every time you actually need to sync...
You shouldn't have to, the ActiveSync USB connection is controlled by one or both of the other 2. Disabling the one mentioned above has worked for me. It now ONLY appears if I ActiveSync.
Nooner said:
You shouldn't have to, the ActiveSync USB connection is controlled by one or both of the other 2. Disabling the one mentioned above has worked for me. It now ONLY appears if I ActiveSync.
Click to expand...
Click to collapse
how do you "disable"? i deleted it
is that the same
cause if it is then it didnt work for me
lbhocky19 said:
how do you "disable"? i deleted it
is that the same
cause if it is then it didnt work for me
Click to expand...
Click to collapse
i am kind of confused too
same here
stas333 said:
i am kind of confused too
Click to expand...
Click to collapse
Deleted the repplog when time changes, but still keeps popping up...
Hi
Before 3 days I replaced TF3d with this one http://forum.xda-developers.com/showthread.php?t=423851&highlight=diamond+manila
Since now I hadn't randomly activesync and charching over night is ok
has anyone found an easier way to make this happen?
dont forget to try turning off the 'automatic change time zone and clock' found in settings-> personal -> phone ->time zones
this mixed in with disabling repllog (apprunaftertimechange)
and mixed with creating a fake server to set the update time to manual
these 3 things combined together worked for me
sayazs said:
dont forget to try turning off the 'automatic change time zone and clock' found in settings-> personal -> phone ->time zones
this mixed in with disabling repllog (apprunaftertimechange)
and mixed with creating a fake server to set the update time to manual
these 3 things combined together worked for me
Click to expand...
Click to collapse
ive asked this before on other threads but when you say disable that repllog does that mean delete it??
lbhocky19 said:
ive asked this before on other threads but when you say disable that repllog does that mean delete it??
Click to expand...
Click to collapse
This 2007 thread from KidNovak explains it all.
http://forum.xda-developers.com/showthread.php?t=322673
You'll need the program “Task Manager by FdcSoft” --> go to "Notifications", select the correct repllog, and click the Icon with the RED dot at the bottom. No need to erase or delete. The Red Dot disables that repllog, and you can enable it again in the future if you need it.
I want to ask just oine thing.
What does the activesync do that you are so mad about it being active? From my own experience it doesnt seem to drain battery, it doesnt pop up any windows, it doesnt make sounds, or noises. Its quiet. So why trying to remove it with such dedication and force?
Just ignore it. I do. And i dont have a problem.
Disabling ActiveSync KeepAlive Setting to manual >>>
I have an AT&T Tilt which ActiveSync keeps autostarting every five minutes and could not stop it. It was a serious power drain on the battery. I found that it takes 3 fixes to stop the sync action from auto-starting all the time.
1. Kill the repllog / remote h process in the task manager (recommmend fdc taskmanager for this)
2. Disable the Repllog Notification (Apprunaftertimechange) in the Notification Window.
3 Registry hack > HKEY>CURRENTUSER>SOFTWARE>MICROSOFT>ACTIVESYNC
locate value "Keep Alive" change this to "0" for disabled. 1 will keep it alive with the remote h settings.
I have Windows Mobile 6.1 Pro and use AS version 4.5 the latest and this works for me.
The ultimate solution.
Ok here's what you do. The fake exchange server solution never worked for me either.
First of all you need FdcSoft's Task Manager program. It is the best and a must have.
Use the Notifications editor to disable the repllog.exe for RunAfterTimeChange. (The disable button is the one with the red dot.)
Use the registry editor to go to [HKEY_CURRENT_USER\Software\Microsoft\ActiveSync] Change the KeepAlive value to 0. Tap and hold "KeepAlive" (or go to file menu) and select "Export...". (not Export All) Save this .reg file in the \\Windows\StartUp folder or save it somewhere else and copy it there.
Now you will need Ghisler's Total Commander.
Using Total Commander, browse to \\Windows\Startup folder or wherever you saved .reg file. (Windows mobile doesn't automaticaly know that .reg file should be opened with TaskMgr so you have to associate it.)
Tap and hold your .reg file and select Properties. Select "Associate" tab. Tap gray box that says "Associate..."
In "Command:" box browse to the folder where TaskMgr.exe is. (\Program Files\FdcSoft\TaskMgr\TaskMgr.exe)
In "Parameter:" box leave the "%1" there, and type "/silent" right after. ("%1/silent") This will keep a dialog box from poping up on start up.
"Ok" everything and you're done! Enjoy.
I'm also running Windows Mobile 6.1 on an HTC Touch Elfin.
Here's how I was finally able to do it, and my notes:
-disable auto time zone/clock updates in “phone” settings under personal
-disable 1 of 3 “repllog.exe” that has to do with update after time change with “TaskMgr.exe – by FdcSoft” under notifications
-change registry value of HKCU\Software\Microsoft\ActiveSync\KeepAlive to 0 (this will not stick after reset unless you've first disabled the auto timezone/clock updates)
-reset phone
-re-enable auto time zone/clock updates (not sure if it still work though without ActiveSync)
-it will work without disabling the notification in TaskMgr too but then you have to leave auto timezone/clock changes unticked and you still have to do the registry change; ticking of auto timezone/clock changes without TaskMgr change to repllog.exe will also re-enable the keepAlive registry value
I am currently using the most awesome Dr. Gonzo WM6.1 ROM, however my phone seems to have developed a slightly annoying quirk over the last day or so. Every few minutes, it vibrates (two short, two long ..--), as if there is a missed call or waiting message (as I see this is a new feature added by Dr. Gonzo). However, I have scoured my phone and there is no waiting notification of any kind and there is nothing running in the task manager either.
The only plugins I have installed are showaco's FeatherWeather plugin and tlogix's CHome Configurator. Both of which I had been using for a while before this vibration issue started.
By changing the interval of the vibrations (through the menu/System/Config Notification), I can see that it is indeed this script that is causing trouble. Disabling and then re-enabling it doesn't seem to help, nor does switching the phone off. I really like this script (when it functions correctly), so I would rather not just disable it completely.
If anyone has any thoughts or suggestions, I would really like to hear them.
Thanks
I've had the same problem before.. the script reads a registry value.
use a registry editor (there should be one one the phone somewhere as its a Dr G ROM).
Goto HKLM\System\State\Shell and look for a key called "Notify", select it and set it to 0. That should stop it.. You might have to reboot the phone.
It worked for me..
Google for PHM RegEdit its free software
My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.
I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.
yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.
Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!
I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.