Database Info

SPB time and alarms

Hello:
I have SPB time and recently the alarms seem to have stopped working.
They work if I place a test alarm in the afternoon for example, but the ones in the morning to wake me up for work never go off.
I have tried, wakeupteak, and scarybears check notify, to no avail, I have re-installed SPB time and the alarms. I have rebuilt my unit from the ground up. Still the same problem!!
SPB time are out of ideas themselves.
Any ideas on what the problem may be, or can someone suggest an alternative clock/alarm program for the PPC for me to try.
Thanks.

Aame problem here. AlarmX from MTUX seems to work but it's not as pretty.

There are posts on the forum somewhere telling why this is. It's something like the device goes in to sleep mode (excuse the pun). The built in alarm works Ok (for me) and so does the alarm in Stop Time.

I've had problems with alarms for almost two years - I've found only two solutions:
Try SuperAlert from WhittakerMoore - it cured my alarm problems except when I had stuff which clashed with it, however it is commercial.
A more recent and radical approach which has also worked for me is as follows (you will need software which can modify the Notifications database, such as Anton Tomov's Pocket Mechanic).
The root of the problem is the CALNOT process which runs at midnight - it performs housekeeping and if it doesn't complete correctly, it fails to trigger the first alarm of the day (and therefore any subsequent ones until you turn the device on).
Use your product of choice to simply delete the midnight notification entry which runs CALNOT.exe - this means that the housekeeping isn't done every night but the alarms will be reliable, since it now cannot fail to complete(!). To make sure the cleanup does occur now and again, put a shortcut to CALNOT.exe in the startup folder. Yes, it makes startup after a soft reset a little slower but it's worth it I feel for reliable alarms. Alternatively you could run CALNOT manually. You must remember to remove the CALNOT notification after each time it runs (including timezone changes) as it reinstates its midnight entry each time.
Although I have over 350 entries in my calendar, I haven't noticed any degradation without the regular housekeeping but I have noticed the alarms working - it now wakes me every morning except when I forget to delete the damned entry after a soft reset.
Let me know how you get on.
Note: If anyone out there wants to knock together a tiny app. which runs CALNOT then removes the notification, I for one would be very grateful - I haven't had the time to do any WM coding yet.

I almost missed a plane because the alarm didn't ring so it's important to fix it. However:
simply delete the midnight notification entry which runs CALNOT.exe
Click to expand...
Click to collapse
how to find this program?
I searched at "calnot.exe" in the registry: nopes, searched in windows/startup: nopes. So how to find the program that calls calnot.exe to delete it? Or just delete the file calnot.exe?
Please help

henk-jan said:
how to find this program?
I searched at "calnot.exe" in the registry: nopes, searched in windows/startup: nopes. So how to find the program that calls calnot.exe to delete it? Or just delete the file calnot.exe?
Click to expand...
Click to collapse
mtbsoft said:
(you will need software which can modify the Notifications database, such as Anton Tomov's Pocket Mechanic).
...
Use your product of choice to simply delete the midnight notification entry which runs CALNOT.exe
Click to expand...
Click to collapse
Do NOT delete the program calnot.exe! Re-read what I wrote, in particular the need for software to edit the notifications database - THAT is where the entry is which needs to be deleted.
Do not quickly skim across the post details, getting half the picture then blindly blundering around in your device - that is the fast way to a hard reset!

Thanks for the quick reply. I didn't read it well, indeed, sorry.
So I deleted calnot from the notication queue and now it has to be fixed, apart from running calnot now and then? Do you (after a run) have to delete calnot again from the queue?

No worries, I just didn't want to be the cause of a hard reset.
Generally running calnot doesn't seem to restore the notification entry, there is a special system notification entry (which I don't recommend you delete) which restores it at each soft reset.
Good luck and let us know how you get on.

@mtbsoft. Thanks for you're warning. But now I have some troubble with calnot.exe : can't copy/shortcut it to startmenu as you mentioned, can't even rename the read only status and can't run it (i.e. after double clicking I don't see it in the notification database appear). Any sugestions?

Tapping on it will run it - it doesn't have a user interface so won't be visible. I think you've misunderstood about the notification - running calnot.exe manually WON'T put the notification back, that only occurs when you soft-reset.
I assume you are using the in-built File Explorer, you should be able to navigate to calnot.exe then tap and hold to select Copy. Now go to the \windows\startup folder and use the Edit menu at the bottom left to select Paste as Shortcut. calnot.exe is actually in ROM so you can't rename or delete it (easily).

It worked! I tried it several times like you described, but got the message it was in use, or something like that. But now it's ok. Thanks a lot, the alarms seems to work properly.

@mtbsoft: I found a program/tweak that may solve the problem. It's free.
Look at http://www.pocketpcfreewares.com/en/index.php for wakeup tweak

All wakeup tweak does (to my recollection) is adjusts the Power up timeout that so many others also do - the results are variable and it doesn't work for me. I actually found a better solution in the shape of SuperAlert from www.whittakermoore.com - finally 100% reliable.

I didn't no, learnt again something. I'll give it a try. Thanks

Trouble accepting calls

Ever since i installed wm6.5 (and I tried a few) I am have trouble accepting incoming calls. This is different from the lock screen issue. Whenever I get an incoming call i see it and either hit the hard key or slide left on-screen to accept but it doesn't answer but continues to ring. if I slide then the slider gets stuck all the way to the left until it stops ringing.
Any ideas as to what could cause this, I have this on different wm6.5 roms, and my friend who has the same wm6.5 rom has no problems.
Please help

well turns out it does answer but takes like a few secs to engage so if i click to answer late in the ring it doesnt have time to answr b4 the person goes to voicemail. i did use trapcall b4, and have now cacelled, maybe it is causing my problems?
any info of how I can reset att to default settings like voicemail and get 100% rid of trapcall.

I got this from a different thread and saved it to my computer just in case I bumped into this problem. I don't know if it'll work on 6.5, but you might want to give it a try:
I had the same problem as many others: When data is on (active or dormant, EVDO or 1xRTT (dormant), it takes many seconds for the calls to be answered, the phone keeps ringing even though I pressed the answer key.
It does appear that one of the tweak applications created the problem, at least for some. After much research, this may be it...
Take a look at your HKLM/Comm/ConnMgr/Planner/Settings/SuspendResume
It is a multi-sz value and should be #777. If it shows anything like ~GPRS or something containing GPRS, change it back to #777 and soft reset.
When I used PHM Regedit to correct this, it seemed to crash (the reg editor never crashed before now). I had to use SKTool's regedit. I will create an export if this will help you.
Once I changed it back to #777, I can answer the call immediately when data is on, time and time again. Prior to this, there was a significant delay.

Dude, thank you so much, I cant believe it was so simple. But I'm confused how it happened in the first place. Anyways yeah, changing SuspendResume to #777 works wonders.

I've got a slightly different Slide To Answer issue.
I just updated to the newest HTC stock rom for my Touch Pro.
I noticed on the first call that Slide to Answer was part of this rom.
It seemed to work well but suddenly I lost the slide button. The green bar for answer and red for reject are still there but the slider itself has disappeared. The only other thing I have changed since the rom upgrade is to add a cab file (from an XDA thread) that restored my Chinese fonts. Could something in that have disabled the button graphic?
What else could it be? How do I get this button back?
Also, is there a way to customize the Slide to Answer screen?
Rom: 5.07.707.2 WWE
Radio: 1.11.25.01

The Slide-to-Answer, for whatever reason, never worked right on my Fuze, so I just disable it.

[APP] Another Locker - HtcExtFun 2.0.0.1

This is locker (screen and sometimes buttons) what i have made for myself.
It's alternative for S2U2 and windows screen lock.
Main features:
1. Lock screen and keys on wake up, but only when ambient light level low
2. Lock screen when any phone activity (dialing, talking, incoming call offering). Because proximity sensor works not very good.
3. Quick unlock without slide using double click on hardware Back button
4. Quick power off after resume if not unlocked
5. Adapted for Inesoft Phone (greate app for me because of customizing contact rings and custom names for phone fields of contacts)
Additional features:
1. Reminders for missed calls, unread sms messages
2. Screen off after call connected
3. Vibrate alerting during the call: connected, n-th second of talking
4. Alternative sms alerting (used by me for setup once and did not setup again after reflash
5. SMS patch utility replace of Zenyee disable Htc Messaging (white form appears on the screen for short time nervous me)
6. Auto redial if call dialing failed
7. Changing keyboard when stylus in/out (yep, i know that HD2 does not have stylus)
8. Simulate stylus out event for unlocking S2U2 with double click on hardware button Back
Disadvantages
1. Settings changed only through registry
2. Minimalistic interface
Advantages
1. First stable build of this utility with good CAB install and uninstall (hope for this)
2. Changed for best (for me) locking of the phone
3. Native code only (I like managed code, but it's speed periodically sucks for small apps)
Install
1. Install attached CAB
2. Settings described in readme.txt file in installed directory (default is \Program Files\HtcExtFun)
Hints
1. This tool can not lock Answer and End hardware keys in call (i don't know hot to apply this and don't want to do this)
Will be interest for your feedback!

A pity none has still posted his feedback, so let me be the first.
1- great app: i use version 0.2 since a long time with great satisfaction (and now that Leo roms disables transcriber in SipMenu, HtcExtFun is the only way to recall it)
2- What did work in old version seems to work well in this one as well (i used only stylus in/out and missed calls/sms reminder)
3- On my device the new screen lock doesn't work. Maybe it's because i have a Blackstone and not a Leo? Anyway i run Manila 2.5.1921 (as Leo), and on resume after suspend the "screen locked" square is there. But not only i can normally use my screen (i can swipe across Manila tabs without problems), but trying to slide the slider nothing happens: the square is still there, the cursor doesn't move. It's a pity, because this was a great improvement (it works with the back double tap, but it's the only way [and i don't like it, since when in my pocket i often press keys]).
4- It's useless i post a screenshot since what appears is the same as in yours
5- Can i suggest you to post your app in "Dev&Hacking" forum? I never read this one since i don't have a Leo, and so only for chance did find you released a new improved version.
6- There are some undocumented reg values:
* HandleSmsPatch
* MaximizeVolumeTime
* LSensorOffValue (i suppose it's for light sensor?)
7- You have not documented that "ScreenLockWhenResumePowerOff"=dword:00000000 disables the poweroff timeout
8- A thing i don't like is that app add itself missing registry keys filling them with standard values. So i, on purpose, didn't add the AlertNewSmsScript and AlertNewSmsSound, but at first start the app did add them to registry.
9- For your records, this is my reg config:
Code:
[HKEY_CURRENT_USER\Software\HtcExtFun]
"HandleSmsPatch"=dword:00000000
"ScreenLockWhenResumePowerOff"=dword:00002710
"MaximizeVolumeTime"=dword:0000000A
"LSensorOffValue"=dword:0000000A
"AlertNewSmsSound"=""
"AlertNewSmsScript"=""
"ScreenLockWhenResumeLight"=dword:00000000
"ScreenLockWhenResume"=dword:00000001
"ScreenLockWhenConnecting"=dword:00000000
"SipChangeStartupWait"=dword:00004E20
"VibrateWhenConnected"=dword:00000014
"TiltZFaceUp"=dword:000002F8
"TiltXYZDist"=dword:0000F350
"TalkVibrateSecond"=dword:00000000
"TalkVibrateLength"=dword:00000000
"StylusOutSipName"="Riconoscitore elaborato"
"StylusInSipName"="Touch Input"
"SipChangeWait"=dword:00002710
"ScreenOffWhenConnecting"=dword:00000000
"ScreenOffWhenConnected"=dword:00000000
"RedialTime"=dword:00000000
"RedialStartSound"=""
"RedialDoneSound"=""
"AlertMessagesSound"="snd-alert-sms-voice.wav"
"AlertMessagesScript"="t3600 aW120v100pw200v100W60r aW200v100pw200v100W100r"
"AlertCallsSound"="snd-alert-calls-voice.wav"
"AlertCallsScript"="t300 aW60v100pw200v100r t3600 aW120v100pw200v100W60r aW200v100pw200v100W100r"
"AlertBatteryLevel"=dword:00000000

Sadly i have to edit my previous 2). Sms/missed call reminder doesn't work with this new version: no sound at all. So i switched back to 0.2

Nice!
Maybe you can help us here?
http://forum.xda-developers.com/showthread.php?t=612072

Hi exidler,
I just tried your soft, which was cool but not the soft-locker I want.
So I wanted to unsintall ... damn! It doesn't work.
Whenever I try, I got that error message "can't register touch driver" (a window titled HtcExtFun Unsintall).
I try after deleting the startup link, and a softreset, so that the exe wasn't running ..
How can I proceed ?
Thank you in advance.

I'm in the same case. I've already deleted all the corresponding keys in the reg but nothing else to do. I'm still stuck with that problem. And no way to reinstall it.
Edit : I used SK Tools software to clean all the registry and unused folders, and now it works.

Modded Skype by SammyBlaze - finally the sound switches to earphone automatically

Hi guys, I tried some experiments with skype and Mort Skript.
So I created this modded version:
rapidshare.com/files/366681199/SkypeMobile_Modded_by_SammyBlaze_v1.1.CAB
udate: mortskript short cut added for first start to start menu
Skype switches now automatically between earphone and speakerphone by simply using Mortscript and Troca2:
Everytime skype is in focus troca2 will be executed so the sound is directed to earphone.
Install on Device.
After installation please reboot and run "RunMeFirstThenDeleteMe" first from Start Menu.
Now you can delete "RunMeFirstThenDeleteMe" (file explorer - my device - windows - startmenu -programs)
I recommend to uninstall your old skype first.
please report your bugs and advice here.
I am trying to integrate Hd2ProximityScreenOff so the screen turns off when you do a call.

awesome! testing this tonight!

Tried it, but unfortunately it does not even run on my Stock ROM Telstra HD2 in Oz.

Sounds nice, but you could say it needs to be installed in internal memory, that this installs and uses Mortscript, and that it's needed to run Mortscript.exe in \Program files\Mortscript to associate the extensions before the shortcut will run. Took me 15 minutes of tracking down what the shortcut was pointing to, opening the file in question to find leads as to how to etc to finally randomly run the Mortscript exe to make it run. Most people don't know/use Mortscript.
Anyway, it seems to work. But there again some explanations from your part would have been nice... at first it wasn't working, and I had to read the script to understand what it did to do correctly. So, it seems it opens an exe that switches output to front speaker whenever the Skype window is in focus. But as I turn screen off when talking (otherwise with screen on I keep pressing on hangup or other stuff when I put the phone at the ear as proximity sensor is not active), and this brings up S2U2, the Skype window wouldn't be in focus anymore, so audio switches back to rear speaker. Also, tapping anywhere in the Skype window during a call makes the little 6-icon popup appear, which the script interprets as Skype losing focus, and audio also switches. Same when adjusting volume, the volume window switches audio. Would be nice to have a simple way to find out a few window names and add them to the script.
Deactivating "lock when screen is blank" in S2U2 seems to make it useable, as long as you have a hardware key assigned to "Turn screen off" and use it.
Also for some reason, everytime I press the power key when Skype is in focus, the device comes back on.

sammybusse said:
Hi guys, I tried some experiments with skype and Mort Skript.
So I created this modded version:
rapidshare.com/files/366524799/SkypeMobile_Modded_by_SammyBlaze_v1.0.CAB
Skype switches now automatically between earphone and speakerphone.
I recommend to uninstall your old skype first.
I only tested this with a german rom so please report your bugs and advice here.
Click to expand...
Click to collapse
Tried it, but it does not even run on my ROM 1.66.405.2 wwe

Shame soo much trouble with this..
would be nice not to have to use Audio Route...

appleseed245 said:
Tried it, but it does not even run on my ROM 1.66.405.2 wwe
Click to expand...
Click to collapse
Read my post above. Run \Program files\Mortscript\Mortscript.exe once first.

Made an update
look at first post.
I will try to implement Hd2ProximityScreenOff-0.2 but:
This would trigger the device lock
...this would cause lag in skype
Ok I could deaktivate device lock and then use hd2ProximityScreenOff

It works, thanks ^^

thanks summybussy ..i managed to install. it works fine. but screen is on when i make call....?

So now I understand why it did not work. I will continue to use Audio Route and/or my headphones. But thanks for the efforts. Not something I would even think of doing...

Skype soundswitch and turn display off
appleseed245 said:
thanks summybussy ..i managed to install. it works fine. but screen is on when i make call....?
Click to expand...
Click to collapse
Unfortunately the screen remains on during calls.
I use ProximityScreenOff for that in combination with DisableAutoDeviceLock
forum.xda-developers.com/showthread.php?t=624206
With AeButtonPlus I mapped windows button (double tab) for device lock.

Hi sammybusse! I found skype drilling my battery very fast. MortScript.exe takes mem 428k and CPU 35%. I left my phone with fully charged battery and runing skype approx. for 6 hours. and went to bed when i awoke phone was off.Any idea haw to fix it. thanks

appleseed245 said:
Hi sammybusse! I found skype drilling my battery very fast. MortScript.exe takes mem 428k and CPU 35%. I left my phone with fully charged battery and runing skype approx. for 6 hours. and went to bed when i awoke phone was off.Any idea haw to fix it. thanks
Click to expand...
Click to collapse
I have the same problem. Big issue.
It is because mort script run all the time and checks wether skype is active.
With the attached skypecode.mscr it will check only every 5 seconds wether skype is on focus.
replace it with the file in windows folder.

Skype uses a lot of battery on its own, even without Mortscript. Really not optimized at all, firstly it will prevent the device for entering standby as long as it's running, and secondly it uses a lot of CPU even when it has nothing to do.

i got it to work perfect on the 1st try...my only concern is, when someone calls, it rings iin the earpiece as well...can this be fixed?

Some ICS 4.0 bugs and quirks

NOTE: This is a list of bugs for STOCK (NON-MODDED) ICS 4.0.3 & 4.0.4 (LC4, LD2, and LE2) (Most bugs from the initial LC4 leak fixed after the two major version leak updates) from DesignGears.
If you have flashed to ANY OTHER CUSTOM ICS 4.0 ROM, PLEASE WRITE IN THE DEVELOPERS' / ROM thread.
1 - 03/26/2012: When selecting "Contacts to Display" and selecting CUSTOMIZE LIST > Selecting ONLY Google Contacts (EXCLUDE G+).
Then you start typing someone's name, it returns contacts in SIM card and on Google contacts.
2 - 03/26/2012: Autocorrect on the included "Android Keyboard" doesn't work by pressing spacebar.....like it had been in previous 2.3.6. Even when changing setting to VERY AGGRESSIVE. FIXED IN UCLD2 LEAK
3 - 03/26/2012 [CONFIRMED] When deleting a message thread, the phone will freeze and turn into a blank screen (except notification bar) then the messaging app will close. FIXED IN UCLD2 LEAK
4 - 03/26/2012: [CONFIRMED] When using the "PHONE" icon to bring up dialer, contacts tab is no longer associated in it.
5 - 03/27/2012: 50/50 Users report more sensitivity on the touch screen, some report lack of sensitivity of touch.
6 - 03/27/2012: HOW TO take screen shot: Press AND HOLD ... VOL DOWN + POWER BUTTON for at LEAST 1-2 SECONDS. You will then be prompted to view the screenshot in notification bar / indicator.
METHOD #2 of taking screenshots: Press and HOLD Power button + HOME key.
7 - 03/29/2012: Some users report when tapping "RESTART" or "SHUTDOWN" on STOCK Power-button option, the phone will freeze. Either you have it or you don't. FIXED IN UCLD2 LEAK
7 - 04/02/2012: Users report echoing or unable to hear other party on an INCOMING call. This is a "hit or miss" bug.
8 - 04/02/2012: [CONFIRMED]Bluetooth stack in the new kernel has resolved a LOT of vehicle-to-android phone issue (static, drops, functions, etc.).
10 - 04/04/2012: [CONFIRMED BIG ISSUE] When creating a new contact in phone and setting it to GOOGLE CONTACTs; forcing a sync or auto-sync option will NOT push the contact to google servers for backup purposes. However, deleting or creating a contact while logged in on a full web browser will push it back to the phone via sync. FIXED IN UCLD2 LEAK
11 - 04/09/2012: [CONFIRMED] There are known issues with stock email app. Syncing unread/read e-mails will not push back to exchange server email client. Also emails me not completely send and stays "stuck" in outgoing box.
FIX (Thanks dixit):
This google thread shows the official issue and show that it was fixed officially in 4.0.4.
https://code.google.com/p/android/is...etail?id=23534
If you scroll down to post 51 you will see there is a link where someone put the two 4.0.4 APKs from a Spring Nexus S 4G which fixes this issue as explained above. So just go to that link, download the two Email/Exchange APKs, put them in System/App, correct permissions, remove your two Samsung Native Email APKs, and that will fix the issue of emails being stuck in the outbox.
Here is the direct link to those two APKs off Post 51
http://files.devphone.org/404mail/
11 - 04/15/2012: [CONFIRMED] When adjusting ringtone level in SETTINGS > SOUNDS, the ringtone level will not lower or raise; it stays at one level.
FIX: Adjust via volume rocker while in any other system screen (Home, MMS, etc) BUT NOT IN-APP. *Thanks petrochemicals!*

Here's what I found and posted in another thread...
So far so good except a few things:
1) I hate the fact that "contacts" are no longer visible in the dialer. Now I need another icon that I rarely use. The only option appears to hit menu and select contacts from there.
2) The "power off" and "restart" options in the extended power menu (hold power button down) seem to lock up and freeze whenever I try to use one of these thus requiring a battery pull. Anyone else experiencing this?
3) Can't use built in hotspot tethering anymore. This is something that I use with my tablet often. Any solutions other than a 3rd party app? If not, what app is everyone using for hotspot tethering?
4) Why in the world don't the signal bars turn green once fully connected? It's driving me crazy because normally that means its not connected to your Google account. This is the first time I've seen this (of MANY different Android phones). - This appears to be an ATT thing as other carriers and phones change the signal bars color when its connected to your google account (as it always should be).

Grey bars, works for for me; turning green = same color as battery = confusion to some it is acting as a double icon of ur battery? lol
I don't get a freeze in the menu.... I'm assuming you're talking about the built-in menu not a modded one? I just use the one that came with the ICS.
Hotspot tethering, you'll have to wait for a dev to mod that unless you are wanting an app for it.

I can tell you that I got my portable hotspot to work. It gave me numerous error messages though when I first went to set it up and the screen freezes when I turn it on. I went back to home and back to the hotspot settings and the toggle remained on. I changed the default password to all 9s bc I was getting an invalid password error. After that, I connected my old iPhone to the Skyrocket wi-fi.
I used to use Barnicle Wi-fi tether but it doesn't work now. Is there a difference between the stock portable wi-fi hotspot program on the phone and Barnicle? Im just curious if Barnicle masked the fact that the user was tethering.
Sent from my SAMSUNG-SGH-I727 using XDA

Yes, I'm referring to the built in power menu. I fixed permissions in CWM and still no go. Any ideas???

I find the keyboard to be a bit slow on the responsive side. Anyone else running into that or am I just trying to type too fast?

Perform a Factory data / reset?
I find the new keyboard fairly responsive vs the old one; I just thought i typed too fast for the old one lol. This one actually keeps up and Swype keyboard tapping works more fluent as well.

good job guys, keep up the troubleshooting so hopefully some devs will cook up a nice rom

fongz27 said:
Perform a Factory data / reset?
I find the new keyboard fairly responsive vs the old one; I just thought i typed too fast for the old one lol. This one actually keeps up and Swype keyboard tapping works more fluent as well.
Click to expand...
Click to collapse
I'll give that a spin. I did that once already to fix my home button problem, so I'll try and do another. But yea I use to use the ICS keyboard from the market on GB, and that was quick enough for me.

stuff I notice so far
I did notice the contact tab missing from dialer. The menu selected one doesn't allow right and left swipe for call/text. In the contacts app, the swipe works ok.
the only real problem for me, thus far, is when deleting SMS threads; messaging force closes.
Anyone else have that?
BTW thanks for starting this thread, wasn't sure where to post bugs - I think this may be usefull to keep them all in one spot.

Getting some odd behavior from Rom Mngr
Aside from other errors I got, when I ask ROM Mngr. to perform a task, I get a bunch of errors like "Messaging has failed," "Internet has failed," "com.google.xx" has failed. But then it goes and performs the request.
However! Whereas on 2.3.6 UCLA3, when requesting a backup via ROM Mngr., it would go straight to the backup whereas now, it goes into CWM and I still have to select Backup from the option there.

Deleting threads freezes my messaging also.
Sent from my SAMSUNG-SGH-I727 using XDA

Noticed a new one.
Not getting pictures with messages now, too.
Nvm. Damn - I hate bug posts. They come, they go.

The only thing I've noticed so far is I don't seem to get LTE in my house anymore. Boo...

I'm having issues with audio files. I can't use either Google Play Music, Samsung Music Player or Doubletwist to play audio. It creates duplicates which I believe corrupt the file itself.
Sent from my SAMSUNG-SGH-I727 using XDA

jayrod88 said:
2) The "power off" and "restart" options in the extended power menu (hold power button down) seem to lock up and freeze whenever I try to use one of these thus requiring a battery pull. Anyone else experiencing this?
Click to expand...
Click to collapse
I get it too, but there is no need for a battery pull if it freezes during a restart.
Press and hold the power button and the phone will restart after a few seconds.
It's a leak, not an official release, so I fully expected bugs.
Face unlock crashes a lot for me.
It fails o power on the camera and then the keypad doesn't respond for PIN input.
Requires a reboot.

rjohnstone said:
I get it too, but there is no need for a battery pull if it freezes during a restart.
Press and hold the power button and the phone will restart after a few seconds.
It's a leak, not an official release, so I fully expected bugs.
Face unlock crashes a lot for me.
It fails o power on the camera and then the keypad doesn't respond for PIN input.
Requires a reboot.
Click to expand...
Click to collapse
Did you do a complete ext4 wipe / format prior to ODIN ONE CLICK ?
Run factory data reset, then fix permissions and then reboot. Face unlock works perfect and pin input works.

fongz27 said:
Did you do a complete ext4 wipe / format prior to ODIN ONE CLICK ?
Run factory data reset, then fix permissions and then reboot. Face unlock works perfect and pin input works.
Click to expand...
Click to collapse
Yep.
Face unlock does work... just not all the time.

have you done "improve facial recognition " if so how many additional pictures did you take?

Facial unlock is perfect for me. No problems whatsoever.
Sent from my SAMSUNG-SGH-I727 using XDA