Howto completely wipe out ROM and reload ?? - JAM, MDA Compact, S100 Software Upgrading

HI
I am busy trying to completely convert my PM10C Imate Jam to a PM10A.
My reasoning for this is simply because i am trying to convert my american phone from 850MHz to 900MHz, i have finally come to the conclusion that there are vital data that contributes to the SELECTION of 900 MHz in the PM10A firmware that i really must incorporate into my PM10C american model.
NOw does any one hav information or software to flash my PM10C with PM10A firmware so that i can completely convert my American PM10C to now show as a PM10A ???
I am also looking for a Level 3 service manual, i.e. the manual that has all the schematics and component layouts for the service center engineers to work with?
Regards
Ridi

Related

adding gprs/mms settings of different operators help needed

I am working in the Philippines right now but run a lot of communications between clients in Taiwan for my job, so when I got the XDA mini from the local telco (SMART), I flashed it with the Dopod 818 1.11 CHT rom so that I can send chinese sms out.
Issue now is the SMART MMS/GPRS settings are not in auto-config. Unfortunately Smart doesn't provide those settings on their website and the last thing I want to do is to call them and tell them I flashed my rom.
Is there any other way to add those settings to auto-config short of cooking a customed extended_rom?
Would also like to have all the settings for the other telcos in Asia since I travel around a lot and juggle a gazillion sim cards.
Looked at the forum and only thing close I could come to is the Ext_Rom kitchen section in the BlueAngle wiki
any suggestions?

Calling for adapting Engineering Mode to HTC TyTN

On HTC’s Windows Mobile 2005 devices updated with the AKU2 firmware it was possible to invoke the Engineering Test Mode (Engineering Mode) by doing the following:
1. Adding the following keys to HKLM\Software\HTC\EngineerMode:
"BuildInEngineeringModeApp"=dword:00000000
"LaunchEngineerModeAppDialStr"="*#*#364#*#*"
2. Saving file GSMTestMode.exe to /Windows and starting it after having rebooted the device
+++
The HTC Engineer Mode presents a lot of operating parameters of technical values (not so detailed but similar as in Nokia’s Monitormode menus).
That’s how these screens look like
http://forum.xda-developers.com/files/gsm_686.jpg
However on the HTC TyTN the Engineering Mode no longer works.
If invoked the screen looks like that (see attached image).
Could anybody try to find out the reason why it does no longer work and try on a workaround ?
Maybe there is information leaked from HTC or maybe there is even a new Engineering Mode application available ?
Who could succeed in doing that ?
ghl10000 said:
Could anybody try to find out the reason why it does no longer work and try on a workaround ?
Maybe there is information leaked from HTC or maybe there is even a new Engineering Mode application available ?
Who could succeed in doing that ?
Click to expand...
Click to collapse
personally i think it might be like that because of different hardware structure of Hermes/TyTN, comparing to Wizard. it has UMTS/HSDPA module, which can reflect software part and necessary dll's. maybe it's worth to browse \Windows folder looking for any .exe at least looking like GSMTestMode, so it might be replacement fot it?
field test
Hermes has the best engineering mode I've ever seen. It is within the windows folder called fieldtest. It does GSM, EDGE, AMR, UMTS and HSDPA. I used it to test the Cingular network.
Re: field test
eeter said:
Hermes has the best engineering mode I've ever seen. It is within the windows folder called fieldtest. It does GSM, EDGE, AMR, UMTS and HSDPA. I used it to test the Cingular network.
Click to expand...
Click to collapse
wow! could anyone check that and post some screenshots?
ghl10000 said:
On HTC’s Windows Mobile 2005 devices updated with the AKU2 firmware it was possible to invoke the Engineering Test Mode (Engineering Mode) by doing the following:
Click to expand...
Click to collapse
Does a HTC Universal also count to this devices?
Hermes Fieldtest
Hallo,
Question to Hermes Fieldtest: -Were can i see the Cell ID in GSM and UMTS and -wich parameters are different in UMTS download or HSDPA download (how can i see if a HSDPA or UMTS download is running in Hermes Fieldtest).

emobile emonster's radio rom?

where is emobile emonster(s11ht)'s radio rom?
New emonster ROM
ftp://htc-jp.com/EM/S11HT_firm_V2_6_881_0_JPN.exe
ROM Version: 2.6.881.0
Radio Version: 1.71.09.01
1.71.09.01 somebody tried this ?
do we have more info (i.e. what does the ROM look like, what is in it, etc...)
What device is this radio from?
Has there been any info found about this radio or ROM for that fact?
http://emobile.jp/topics/info20080723_01.html
This is Official ROM for emonster by emobile & HTC.
They released it july,23.
webpage translation.
Translation: Japanese » English平素はイー・モバイル電話サービスをご愛用いただき誠にありがとうございます。 ご愛用いただいております携帯電話EMONSTER(S11HT)におきまして、最新の本体ソフトウェアを準備いたしましたので、ご案内いたします。 お客さまにおかれましては、最新の本体ソフトウェアにバージョンアップしていただくことをお勧めいたします。 最新の本体ソフトウェアにバージョンアップしていただく前に、必ずWindows Mobileデバイスセンター、またはActiveSyncにて、本体メモリに保存している情報(連絡先・写真・メール・その他ファイル等)をお使いのパソコンにバックアップしてください。 本体ソフトウェアのバージョンアップを実行することで、本体メモリは工場出荷時の状態となり、ご使用開始後に保存された各種データは全て消去されますので、あらかじめご注意ください。 バージョンアップを実行するにあたり、EMONSTER(S11HT)単体では、バージョンアップできません。以下の「バージョンアップに必要な機器と環境」をご用意ください。 弊社では今後もより良い商品・サービスのご提供に努力する所存でございますので、引き続きご愛顧をお願い申し上げます。 ■ 対象機種 EMONSTER(S11HT) High Tech Computer 社製 ■ 対象バージョン 2.5.881.0 JPN ■ 最新バージョン 2.6.881.0 JPN (補足)対象ROMバージョンの確認方法: 「スタート」>「設定」>「システムタブ」>「装置情報」>「バージョンタブ」をタップしてください。 ■ バージョンアップ内容 本体ソフトウェアをバージョンアップすると以下のように改善されます。 ・MMS(EMnetメール)にてメール送信する際、「.(ドット)」が2個以上連続するメールアドレス宛に送信が可能となります。 ・モバイル向けWindows Live Hotmailからのメール受信が可能となります。 ・その他、端末動作の安定性が向上します。 ■ バージョンアップに必要な機器と環境 ・EMONSTER(S11HT)本体/付属品USBケーブル/付属品CD-ROM ・バージョンアップファイルのダウンロードに必要なインターネット接続可能なパソコン ・パソコンの搭載OS   Windows 2000 SP4以降   Windows XP SP1/SP2   Windows Vista (32bit/64bit版) ・EMONSTER(S11HT)の必要な本体空きメモリ容量 ■ ダウンロード及びバージョンアップ手順 こちらからダウンロードください。 ※約60.3MB(バージョンアップの所要時間は、約10分です) ■ 提供開始日 2008年7月23日から ■お問い合わせ先 ご不明な点がございましたら下記窓口までお問い合わせください。 イー・モバイル カスタマーセンター 受付時間:9:00~21:00 (年中無休) イー・モバイルの携帯電話から 157 (無料) 一般電話などから (フリーダイヤル) 01 Yee patronage of mobile phone service Thank you for your love.
We love mobile phones. EMONSTER (S11HT) OKIMASHI to the latest software to prepare your body to the offer.
Customers REMASHI placed on the body of the latest software version that you recommended.
The latest software release of the body before, make sure Windows Mobile Device Center, ActiveSync or at the main memory to store the information (other contacts file photo mail, etc.) on your PC Please backup.
Console software can be upgraded to run in the main factory of the state memory, and after the start of your data is stored in various All will be cleared in advance please be careful.
Upgrade to run them, EMONSTER (S11HT) alone is upgraded. Following the "release of the necessary equipment and the Environment" is available KUDASAI.
We will continue to provide better products and services that our efforts can not continue to favor you.
■
View Platform
EMONSTER (S11HT) High Tech Computer Corp.
■
View version
2.5.881.0 JPN
■
Latest version
2.6.881.0 JPN
(Supplementary) How to find the target ROM version:
"Start"> ""> "tab"> "information system"> "version tab" to tap please.
■
Upgrade
Body upgrade the software and improve following.
MMS (EMnet mail) when sending in mail, ". (Dot)" in two or more consecutive E-mail can be sent.
Windows Live Hotmail for mobile mail from there.
In addition, the terminal operation to improve stability.
■
And upgrading equipment necessary for the environment
EMONSTER (S11HT) Body / USB cable accessories / Accessories CD-ROM
Upgrade to download the necessary files can be connected to the Internet PCs
OS-based personal computers
Windows 2000 SP4 or later
Windows XP SP1/SP2
Windows Vista (32bit/64bit)
EMONSTER (S11HT) the body of free memory capacity necessary
■
Download and Upgrade instructions
KUDASAI available for download.
※ approximately 60.3 MB (release of Travel time is approximately 10 minutes.)
■
Provided start date
From July 23, 2008
■ Contact.
If you have any questions please contact the following office.
The creation of mobile e -
Hours: 9:00 to 21:00 (open seven days a week)
Yee mobile phone from the 157 (free)
And General Telephone (toll free) 01
SO is this for the Kaiser is the big question Has anyone flashed the radio?
ModsSuk said:
SO is this for the Kaiser is the big question Has anyone flashed the radio?
Click to expand...
Click to collapse
http://www.4shared.com/file/56356401/61db8363/Test_Radio.html
Just flashed the radio. Looks like it went successful.
Saw a little red "emo" in the bottom left hand corner on splash screen that I have never seen before.
ModsSuk said:
SO is this for the Kaiser is the big question Has anyone flashed the radio?
Click to expand...
Click to collapse
emonster = HTC TYTN II (S11HT)
http://www.htc.com/www/press.aspx?id=33988
C'mon ModsSuk, be the first to report u r successfully flash the radio
hang.tuah said:
C'mon ModsSuk, be the first to report u r successfully flash the radio
Click to expand...
Click to collapse
Radio flash successful. Sound works and Camera works. Will create a new thread.
AllTheWay said:
http://www.4shared.com/file/56356401/61db8363/Test_Radio.html
Just flashed the radio. Looks like it went successful.
Saw a little red "emo" in the bottom left hand corner on splash screen that I have never seen before.
Click to expand...
Click to collapse
looks like ATW is the man!
Long live AllTheWay! No pun intended.
Is there anything unique about the ROM itself?
obviously the radio is something new but does this build bring anything to the kitchen?
This is the build
CE OS 5.2.1944 (Build 18547.0.7.3)
look like a WM6
guess no 6.1 for Emobile users yet
I could be wrong but i think the spl is 3.06
could this be a new hard spl for wm6 users
btw for thous of you thinking this might work with tmobile i have tried it in my area and no 3g yet, but i am not sure if 3g is in my area ether. (Chicago suburbs)
and i have only played with it for 10 mins.
warwolfx0 said:
this is the build
ce os 5.2.1944 build 18547.0.7.3
look like a wm6
guess no 6.1 for emobile users yet
i could be wrong but i thing the spl is 3.06
could this be a new hard spl for wm6 users
Click to expand...
Click to collapse
That's correct I saw SPL 3.06 as well.
brynwall said:
do we have more info (i.e. what does the ROM look like, what is in it, etc...)
Click to expand...
Click to collapse
I just got the radio, not a WM6.x ROM image
I have 2 kaisers, 1 is emobile, the other is from HTC (so carrier independent-i was using softbank). The ROM installs fine on both, but i can only get phone and internet on the emobile. When i put the emobile sim in the kaiser from HTC, phone and internet doesn't work. I guess the 1.7mhz is hardware dependent instead of ROM/Radio dependent. Hope this info helps...

Radio version

Hi everybody,
How do I know that my Radio Version is compatable with my region coverage. I live in Sweden and I have 2.11.50.20 radio. The only problem I have is unable to send SMSs to other middle east countries.
My great appreciations to whom offer help.
A good place to start is to look through the Radio thread in the device specific forum and look for users with same credentials but even then the only way to find the best radio for device is to flash and test since so many variables Carrier/Location then Signal/Data Speed/GPS Fix/Battery Life etc.

[Q] H P Ipac

Tried to search the answer to my question, but cant find it anywhere.
I need to upgrade my current PDA because of specialised software, I need windows mobile 6.1 - 6.5, and while I am about it wi-fi may be a good idea. Because I am looking at an obsolete product the manufactures are of no help to me.
Been looking at eBay at HP Ipac's as there are so may to choose from.
My question is how do the model numbers relate to the age of the Ipac and its operating system, so I dont end up with something that wont do the job?

Categories

Resources