Related
I've got a Bluetooth Car audio in my Toyota from Toyota. But I cannot establish a connection between my PDA (BA) and the car.
I Know there are not all bluetooth profiles installed on the BA.
I'm using WM2003 SE and the Widcomm Stack 1.0.3900.
How can I change/enhance the Bluetooth stack?
Is it working with WM5?
greets
JEKAL
I've the same problems with Ford.
I 've already posted this problem in every forum I know - but hadn't got any answer yet.
Now shouting loud
HI FOLKS, WHO CAN HELP ???? :lol:
Dieter
@dieterpapa
I have a solution which is working for me since last night :!:
I reinstalled the MDA3 from scratch with the latest ROM version (from march this year) and applied the audio gateway patch. :!: :!: :!: Do not restore any Backup made before.
Now it is working :!::!::!:
regards
jekal
Hi jekal,
thanks for the info. Which ROM version are you using ?
To my best knowledge I believe to have the latest version, too.
I did reinstall from scratch in April with the ROM mentioned below.
What's the difference to your version ?
What type of a Ford handsfree device are you using ?
Dieter
Hi dieterpapa
I'm using the same ROM version mentioned in your signature.
Did you apply the audio gateway patch?
Well I am using a Toyota Blutooth car kit, not a Ford.
Regards
Jens
jekal said:
Hi dieterpapa
Did you apply the audio gateway patch?
Click to expand...
Click to collapse
Audio Gateway patch ?
What I still have to apply is: BA_OEM_AudioGW.CAB
Is this the correct patch ?
Dieter
PS: Jens seems quite German/Austrian/Swiss.....
Yup, it is german, but I think we should keep our english for the others.
My patch is called Version 1.33g. Latest file in Cab is from Jan 27th 2005.
If you have this applied I probably cannot be of any further help.
Regards
Jens
did try with ford - doesn`t work. Ford only supports a "handsfree" bluetooth profile - the BA only has "headset".
I`m still trying to get an information how to upgfrade the BA to "handsfree" BT profile.
dieter
Bluetooth & Toyota Prius
I have an XDA 2 (UK - marketed by O2) & have (after 5 months) discovered that Toyota admit to having a problem with bluetooth connectivity for "some models" (three newer phones belonging to garage employees also failed to bond when I took it back after trying to create a bond for a week& these were not PDA phones!).
They tell me that if the bluetooth version I have has two specific files, it SHOULD be possible to connect - the files are HFPv1 M3 Profile & OPP v 1.1 The problem I have is finding out whether I have these files - I have an e-mail in to O2 at the moment & will be happy to let you know what they come up with - from Toyota's guarded reaction the XDA is clearly a "problem" model & what I do not know is what happens if I prove I DO have these files & still can't make a bond!
Toyota say they can't supply a list of compatible phones because "it would soon become obsolete" but technically minded folks might like to know that they say you need Bluetooth 1.1, Hands Free Profile 1.0 & Object Push 1.1
As I could grow old waiting for O2 to get back to me I'm afraid I gave up - if you want the PDA function of the Xda2 & a phone which will bond with the Toyota system, the Orange SPV M600 bonded instantly & seems to work well even near my home where the signal is pretty poor!
dieterpapa said:
Ford only supports a "handsfree" bluetooth profile - the BA only has "headset".
I`m still trying to get an information how to upgfrade the BA to "handsfree" BT profile.
Click to expand...
Click to collapse
Having a similar problem with a US 2006 Acura TL and a Cingular 3125. The phonoe pairs, but only has limited features. Call waiting drops the call and routes the waiting call to voice mail. Most annoying.
I understand that the Cingular ROM build I have *should* be able to support the HFP, but it was not included in the build for some reason.
Looking for a way to push address book, handle call waiting correctly, display battery life and signal strength on car dash display. As far as I can tell, HFP should handle some or all of those.
Any thoughts??
TVBanks98 said:
Having a similar problem with a US 2006 Acura TL and a Cingular 3125. The phonoe pairs, but only has limited features. Call waiting drops the call and routes the waiting call to voice mail. Most annoying.
Click to expand...
Click to collapse
I'm considering purchasing either a 3125 or 8525, but I am very concerned about losing the ability to accept a second call via my Acura TL handsfree system. Almost all of my calling takes place in my car, and this feature is critical to me. Does anyone know if the released Cingular 8525 works with the TL?
Third party fix for some cars
Guys
I came across the following after much searching. It certainly works for me, you may wish to take a closer look at it.
http://www.jetwaremobile.com/bthfx/support.htm
Hi all Gurus!
I was planning to get myself a Jabra BT8010 and plan to get it working with WM6 installed XDA MiniS.
Generally, how is the sound quality of BT A2DP as compared to normal headphones? Are there many issues in BT Stack of WM6 that might prevent nice music experience?
Also, has anyone tried BT8010 with WM6 Orwell's rom? and got it working perfectly fine?
And can we just jot all the issues/problems/solutions faced with WM6 (whether Orwells or PDAViet) and A2DP here in this thread?
Mods, the specific threads are all scattered so I thought I would start off this thread specifically for WM6 and A2DP. Please delete this thread if this topic doesnt require a separate thread.
thanks,
Sid
Works fine on mine with a Sony Ericsson DS910, and an iTech Blueband.
It has AVRCP also, so with the DS910 it supports all the controls.
Quality is probably about the same as A2DP from my K800i, but it is all quite memory intensive, so if you're low on ram it will stutter like a bastard.
i had the PDAviet 3 WM6 and the xound quality on mine was okay..its just a cheap think i bought on ebay that you plug your own headphones into. its eem sto lose some base and sound a bit tinny compaired to the same headphones plugged into my 8125 directly, but that could just be my BT receiver.
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Im Using my Mono SE headset to listen to movies etc on the go and have noticed a bit of a drop in quality from WM5 to WM6, It seems to crackle more on WM6.
Bluetooth range is very good though, I was on a call the other day and someone came to the gate so I got up and went outside still talking on the headset only to realise my Wizard was still on my desk 10 meters away
Jules
totalcmdext said:
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Click to expand...
Click to collapse
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
But used as hands-free has quite bad quality, at least in my case most of the times I have to disconnect the bluetooth and use the phone.
Perhaps the Jabra are better in this aspect.
rodalfa said:
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
Click to expand...
Click to collapse
Can you share the exact location of this key in the registry?
Although my Jabra hasnt arrived yet. I just want to be ready.
--Sid
Got My Jabra BT8010!
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
sids911 said:
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
Click to expand...
Click to collapse
Give this cab a shot. My buddy uses it on his Mini S, says it works wonders. I don't have a a2dp headset yet. I forget what brand he has, it's a something-com I think, the one that folds up.
My BT620s is on the way, I can't wait. I will let you know how it works out.
computer9cowboy said:
My BT620s is on the way, I can't wait. I will let you know how it works out.
Click to expand...
Click to collapse
I got it today.
The damn thing took forever to charge the first time.
I have to say I am very impressed with this thing. Works out of the box with WM6, so far no issues whatsoever. The sound quility is not audiophile level, however it is a lot clearer than I thought it would be!
I was listening to some songs that i have only heard on my crappy laptop speakers and they are awsome. I can hear a lot of things that I couldn't hear before. The bass on these is great.
the best part is that they were only like $60 US, that is less than I paid for my Jabra BT800 a year ago.
I Give the BT620s a 2 thumbs up!!!!!
btw no A2DP fixes have been applied to the Mini S, I am using PDAViet 3 so I am not sure, actually there may be some tweaks in that.
Using A2DP on pdaviet3 with the itech clip IIs headset works great for me:
PROs:
- no skipping after 20 min of mp3 playback
(EDIT: it does drop audio for one sec about 1-2 secs after initial playback, but then resumes)
- not wired headphone sound but pretty darn close
- seamless music pause/resume with incoming calls
- no problems at all with MS Voice Command
CON:
only one so far - people on other end when asked about sound of MY voice said it was a little distant/tunnel sounding (but this is more due to the mic location on the itech)
That being said, I've just "reverted" back to faria's 3.3 rom. Today screen with SPB Pocket Plus/Diary combo seems snappier.
i have wm6 and sonorix OBH-0110, and sound quality if awfull comparing to PC connection with toshiba bluetooth stack. and some cooker said that wm6 bt stack is alot worser then wm5 one.
Hi All,
I dont have this location on my WM6 Orwells: "HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/"
The "Settings" folder and the subkeys are not there. This location was there in WM5 while it isnt there in the WM6. Does anyone know where it has been relocated?
And any settings for A2DP skipping and Music playback speed uneven-ness?
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
AgentSmith said:
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
Click to expand...
Click to collapse
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
sids911 said:
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
Click to expand...
Click to collapse
Yes I created those manually. Now I use Molski's AKU3.3 Crossbow style rom and sound quality improved alot. Still not on the same level as a wired headset but much better nonetheless. As soon as there is a better WM6 rom with working A2DP tweaks I will upgrade again.
An Update,
I used this A2DP fix http://forum.xda-developers.com/showthread.php?t=284974
and skipping went away. Also, music quality reduced.
I uninstalled the fix, and I have the quality back, but songs have started skipping again.
Cant MS provide for a better BT stack in WM6 with all their development prowess??
Would going back to some stable ROM like Molski's or Farias WM5 help?
Faria's WM6 and A2DP
Another update....sighhh
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Seems like I wouldnt be able to enjoy this gift. Why cant things just RUN....
I am guessing, changing ROMs wouldnt help...or would it? Does Widcomm stack work on WM6? Anyone with this experience?
The next ROMs I am gonna try are:
1. WM6 MBE
2. Farias 3.3 AKU
3. Molski's WM5
After that i will try selling my Jabra BT8010.
sids911 said:
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Click to expand...
Click to collapse
Anyone figure out a cause behind the intermittent skipping and speed fluctuations when playing music over bluetooth? I'm using the XDA Mobile 6 release 2a ROM with my BlueAnt X5i headphones. Everything works for the most part. But about 10 to 15 minutes it will drop audio for a few seconds, then start back up again. Annoying but I can live with it.
What's really irritating is the fluctuations in playback speed. For some reason playback tends to speed up every 5 minutes or so. When I skip ahead or go to the next song and it's fine. Then the issue recurs again in 5 minutes... repeat cycle.
I've tried using different mp3's of different bit rates and that doesn't seem to have an impact. I've also tried different players - WMP, TCPMP, GSplayer, Mortplayer, etc. All seem to behave the same way when it comes to variations in speed during playback. Any ideas on this one????
just wanted to say: IT WORKS!!
finally i can answer calls AND listen to music cause my wired headset is mono (damaged jack i guess).
after installing one of the new wm6 roms and constantly reading anything here i finally ordered a bluetoth headset (motorola HT820 on german ebay for 24 incl. shippment - unbelievable dont you tthink..)
it came today and everything works fine.. stereo music (although i have to say goodbye to my new toy named speex codec as it seems to be to difficult to be handled by the cpu) and calling.. i even can talk to the voice commander
just wanted to share my happiness
but since this a problem solving forum: can i use the motorola headset buttons to start voice commander?
nice day to everyone
ok, found it in Excalibur section. Works perfect and if anyone wanted to know here it is again:
how to enable voice command with bluetooth headset button:
HKLM\Software\Microsoft\Bluetooth\Audiogateway\
Entry "BTAGextModule" has to be changed to "vcbthag.dll"
My default Entry was different than mentioned in the Excalibur thread(btagext.dll) but as it worked i didnt care
Awesome! kinda off-topic, but do you know how to increase the Bluetooth sound output? my headshet is a little low.
Awsome stuff ! Got to love voice command !
Do you know where we can get it as a seperate cab file, as the BETA Rom, and the Pefect English Roms have this ESSENTIAL software removed from them....
(Its the only reason why I havent upgraded to the newer roms !)
Anyway very good find !!!!!!
I am happy that i am not the only one who likes it
Dont know where to get a cab, cause its not legaI.. i am looking for german version, same problem (only trials available)
Didnt upgrade to later roms also because they are missing some features. But i like the rom i have now. No need to upgrade. No CPU Problems for example
The volume problem is not that easy to solve i guess.. what headset do you have?
Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?
johnripper1 said:
Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?
Click to expand...
Click to collapse
This is an interesting request. I have tried to make my universal work with A2DP using various registry hacks, but I can only get a couple of seconds of sound and then it cuts off. I swear it used to work last summer on a different ROM.
My guess is that changing the core might help.
Anyone can help?
I am not quite sure what my last rom was, but i think it was a 6 Pro Rom and I had the same problems.
YES,have Different Rom
Hi brother there's is a WM6 Roms of UNI with different BT stack,it is use Broadcomm bluetooth stack and work fine on my used,but in first you should know there have some bugs while you are picking up and ending the call with your BT headset's button,you should learn how to use it ,the roms link is
http://forum.xda-developers.com/showthread.php?t=291875 ,it made from helmi_C ,I am very glad to use these rom since i used HP 4150 before and the HP use broadcomm stack,it have great a2DP quailty and can use avrcp profiles. Think it can help you !!
Okay thank you so long.
This BT Stack is avaiable for seperate download as well, but I not sure it if works...
http://forum.xda-developers.com/showthread.php?t=342039
Hallo experts,
I am a newbie to this forum and a greenhorn concerning programming. But I bought the HTC Kaiser in order to get it running with my Mercedes Bluetooth SAP V2 Cradle (Article number Mercedes Benz: A204 820 0535). Unfortunately, the cradle does not work with the Kaiser. Do you know any solution (another ROM? for example) that may change the situation?
Thank you all very much for your appreciated help!
doc holiday
HTC Kaiser
Don't have a Merc....One day maybe. Had similar problems as you with a Parrot bluetooth car kit though.
Found that Dutty 29 Apr, and Laurentius' latest roms work completely with it though. Other roms may work too (don't want to tread on anybody's toes).
Some of the older cooked roms would either not route the audio properly, would only work for one call then stop routing, etc.
The latest rom I have tried is PDAViet'. Very fast in some aspects, Very slow at others. The Parrot car kit has real problems working with this rom.
Basically, try a Dutty (latest), or the latest Laurentius and I reckon everything will be fine.
Thank you very much Blartiartfast for you rapid and competent reply!
So I will try to change the Rom to the one's you mentioned and will report the result
Have a good time m8
doc holiday
HTC Kaiser
i've had problems with both a hermes and kaiser connecting up to the mercs bluetooth.
What i found i had to do was to get both the merc and the kaiser to search and connect to each other at exactly the same time. I found that if you made the merc search for the phone it wouldn't auth, and vice versa. But oddly making both connect at the same time worked.
Hope this helps.
carkit
hello,
i have a bmw , and with the Laurentius_26 rom (http://forum.xda-developers.com/showthread.php?t=389915) , my bluetooth connection works as a charm.
grtz
Thanks both of you ghostie and BeeCee
I will try it
doc holiday
HTC Kaiser
BeeeCeee said:
hello,
i have a bmw , and with the Laurentius_26 rom (http://forum.xda-developers.com/showthread.php?t=389915) , my bluetooth connection works as a charm.
grtz
Click to expand...
Click to collapse
Agreed! Laurentius_26's latest ROM works very with my ML63 AMG. Sometimes it randomly disconnects, but what Phone/Rom isnt going to?
ghostie said:
i've had problems with both a hermes and kaiser connecting up to the mercs bluetooth.
What i found i had to do was to get both the merc and the kaiser to search and connect to each other at exactly the same time. I found that if you made the merc search for the phone it wouldn't auth, and vice versa. But oddly making both connect at the same time worked.
Hope this helps.
Click to expand...
Click to collapse
This approach has worked for me several times as well. I use Dutty's April 29th ROM and have found stability to be fantastic. I haven't dropped a Bluetooth connection yet. Good luck.
T
Many thanks to all of you folks
doc holiday
HTC Kaiser
Problems always persist with HTC Kaiser and MB bluetooth SAP
As stated in the replies to my question (Thanks to all of those who answered), I tried the last Dutty ROM and the last Laurentius ROM - but in no way I have been able to establish an adequate bluetooth SAP connection between my Kaiser and the mercedes benz bluetooth sap v2 cradle (I provide the original art. no A204 820 0535 in order to be more precise about the item I use).
Does anybody have a step by step "cooking receipt" how I could establish the communication? I suppose that the MB bluetooth sap device uses A2DP, but nobody could confirm until now...
The Kaiser recognizes the MB bluetooth sap device on a regular basis as "UHI-SN3483" and sometimes as "MB-Phone". The MB device recognizes the Kaiser as "Pocket_PC" with the Laurentius ROM and as "TYTN II" with the Dutty ROM. Note that the "Remote SIM Access" was enabled in both ROM's.
I tried also to modify the registry entry
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD from decimal 5898764 (Smartphone) to decimal 5374476. But no connection at all.
I didn't use JETware because I do not want an HFP but a SAP connection.
Another point I could not deal with is that the Dutty ROM features in Settings an item named "Bluetooth SIM Access". What does it is for and how to set it? pointing on it does not result in another effect than display in the header where was located Settings the term "BT Remote SIM Acce"
Sorry I have been that long, but I really need to get into this bluetooth SAP connection with my Kaiser
Thank you all
doc holiday
HTC Kaiser
hello guys... I've read in one of the threads for a diamond-rom-based rom that it includes "SIM Acess Version 3.0.xxx"... perhaps it will work with thsi new version... but until now I've not found any cooked, diamond-based rom, that includes SIM Access...
doc holiday said:
Does anybody have a step by step "cooking receipt" how I could establish the communication?
Click to expand...
Click to collapse
With every ROM that I have used before this one - it has been a rather hit and miss endeavor to link my Parrott bluetooth in my car with my phone. I USUALLY have to tell the PArrott that I want to link with a phone and step through things.
With the DEATH V3.5 ROM installed I got in my car and was in a hurry and thought I would sync them later.
After I started the car the phone indicated that the PARROTT wanted to connect and establish a connection - I indicated that it should be allowed - I was then asked for a key code on my phone- I looked at the PARROTT display device and had a 4 digit code there - keyed that into my phone and it paired easily.
Go figure...
Bill
I work for Mercedes and I paired my Kaiser 10s of times. I am guessing you are in the UK because we don't use the sim access cradles. I don't see why our technology would be better than yours. The cradle we sell that works is 6-7-87-5878 But I doubt it will work there.
I was trying to use a Nokia 616 car kit with T mobile sim in the UK, but T mobile does not support Sim acccess profile with their sims. I am about to try an o2 sim which hopefully will.
If the NB uses sim access profile and the provider does not support that use of its sim, then the Nokia will not even allow fallback to bluetooth car profile.
I hope you proble is not being caused by the above but thought you should be aware in case!
Regards
Chapelhill
It does works for MBZ. I am using it without any issue
Htc touch diamond and Mercedes SAP kit
i have a mercedes sap v2 car kit, i have the same problem being not able to pair with windows mobile based phones, the car can see the phone but phone cannot recieve the password confirm and so connection fails.
i tried many roms, added the SAP settings, and yesterday had the chance to try the new HTC touch DIAMOND on car, but same results.
i think that solving this problem is just a software issue, first in windows profiles, or as addition from Phone manufacturers (as HTC) ,because the car kit is already fixed to car and cannot be modified to use other profile.
but i still have hope that the professionals in this forum can help to solve this problem, before any of Microsoft or HTC. Please share any information to help
Thank you
Mercedes Benz makes five BlueTooth adapters that have five proprietary firmware that each adapts to a different type of phone. For example, a Vorizon CDMA BT adapter will not work with Sprint CDMA phone and vice versa. So in essence, if you have a AT&T service, and use a Motorola Phone, MBZ provides a specific BT adapter, that would be close to impossible to pair with an HTC device.
I would suggest going to an authorized Mercedes Benz parts department at their dealership and request to try all 5 adapters b4 you commit to buying one.
Only In the new 2008 and 2009 C-Class MBZ cars the BT adapter is universal and built in. In earlier models and other models (2008's), the BT adapters would need to be purchased independently; a 2X4 device that installs in the center glove box that works as a link between the media port of the car ( Hands Free) and the phone.
My 2 cents....
try the neon radio rom
i tried it in one of my friends car
if it did not work (change your car to fit your phone )
doc holiday said:
Hallo experts,
I am a newbie to this forum and a greenhorn concerning programming. But I bought the HTC Kaiser in order to get it running with my Mercedes Bluetooth SAP V2 Cradle (Article number Mercedes Benz: A204 820 0535). Unfortunately, the cradle does not work with the Kaiser. Do you know any solution (another ROM? for example) that may change the situation?
Thank you all very much for your appreciated help!
doc holiday
HTC Kaiser
Click to expand...
Click to collapse
Penske MB said:
It does works for MBZ. I am using it without any issue
Click to expand...
Click to collapse
which Penske Mercedes Benz do you work at?
doc holiday said:
Hallo experts,
I am a newbie to this forum and a greenhorn concerning programming. But I bought the HTC Kaiser in order to get it running with my Mercedes Bluetooth SAP V2 Cradle (Article number Mercedes Benz: A204 820 0535). Unfortunately, the cradle does not work with the Kaiser. Do you know any solution (another ROM? for example) that may change the situation?
Thank you all very much for your appreciated help!
doc holiday
HTC Kaiser
Click to expand...
Click to collapse
Try Htc shipped WM6.1
If not work.
Read this.
The Bluetooth® (HFP) telephone module, which is also suitable for Motorola PEBL U6, Nokia 6131, Nokia 6111, Nokia N70, Sony Ericsson K610i, Sony Ericsson W550i and BenQ-Siemens EF81 mobile phones, acts as an extension of the pre-installation for mobile phone with universal interface, a feature which is already present in many of the latest Mercedes-Benz models (optional extra Code 386). The module is simply inserted into this pre-installation in the centre armrest. The Mercedes-Benz Bluetooth® (HFP) telephone module, in independent-design closed-box format, will be available from Mercedes-Benz sales partners from March 2007, and is priced at EUR 250.00, including VAT (price applies to German market).
High-end telephony: the second generation of the Mercedes-Benz Bluetooth® (SAP) telephone module offers even more possibilities