Voice Command + BlueTooth Stereo Headset + WM6 - HTC Tornado

just wanted to say: IT WORKS!!
finally i can answer calls AND listen to music cause my wired headset is mono (damaged jack i guess).
after installing one of the new wm6 roms and constantly reading anything here i finally ordered a bluetoth headset (motorola HT820 on german ebay for 24 incl. shippment - unbelievable dont you tthink..)
it came today and everything works fine.. stereo music (although i have to say goodbye to my new toy named speex codec as it seems to be to difficult to be handled by the cpu) and calling.. i even can talk to the voice commander
just wanted to share my happiness
but since this a problem solving forum: can i use the motorola headset buttons to start voice commander?
nice day to everyone

ok, found it in Excalibur section. Works perfect and if anyone wanted to know here it is again:
how to enable voice command with bluetooth headset button:
HKLM\Software\Microsoft\Bluetooth\Audiogateway\
Entry "BTAGextModule" has to be changed to "vcbthag.dll"
My default Entry was different than mentioned in the Excalibur thread(btagext.dll) but as it worked i didnt care

Awesome! kinda off-topic, but do you know how to increase the Bluetooth sound output? my headshet is a little low.

Awsome stuff ! Got to love voice command !
Do you know where we can get it as a seperate cab file, as the BETA Rom, and the Pefect English Roms have this ESSENTIAL software removed from them....
(Its the only reason why I havent upgraded to the newer roms !)
Anyway very good find !!!!!!

I am happy that i am not the only one who likes it
Dont know where to get a cab, cause its not legaI.. i am looking for german version, same problem (only trials available)
Didnt upgrade to later roms also because they are missing some features. But i like the rom i have now. No need to upgrade. No CPU Problems for example
The volume problem is not that easy to solve i guess.. what headset do you have?

Related

BT Headset w/caller ID and XDA II/IMate PPC

In reviewing the forums, I am unable to find a "straight" answer (at least one I can understand), about whether *ANY* BT headset with caller ID will fully work with the XDA II (or in my case, the IMATE PPC).
My configuration:
Imate PPC (XDA II)
ROM: 1.72.00WWE (3/15/04)
Radio: 1.14.00
Protocol: 1337.24
ExtROM: 1.72.800
I am running Pocket Bluetooth Tools V1012 (also tried 1100).
Can anyone tell me if the Sony-Ericsson HBH-660 or any other caller-ID enabled BT headset will properly display the caller number and/or name with the above hardware/software profile?
I know for sure that the Jabra BT800 will NOT. The headset works (actually, works great... good reception!), but the caller ID does not work.
Thanks in advance!
-Kevin.
Hi,
There are many ways to get the Bluetooth with Caller ID works on the PPC. The trick is that the Caller ID needs a Hands Free profile, which is not standard in the PPC. After using one of these ways, you will end up having the the caller number only appears, but no names. If this is what you want, I can tell you how it could be done.
Hi Waladany,
Yes, I would be very interested in knowing how to get it to work. A number (without name), is perfectly acceptable. I still have the Jabra BT800 headset for about 6 more days before I must return it for a refund, so I can use it to test.
Thanks in advance.
-Kevin.
Jabra BT800 and Caller ID and XDAII WM2003SE
I would also be VERY interested in how to get this to work... Thx...
Ok Guys, here are what i got.
You have two ways:
1- Install the merged rom made by sin (you can find it in the forum), as it includes the bluetooth fix. ( This is what I tried)
2-a- Install the Bluetooth Handsfree fix, I will attach it for you. After installing both updates, you should try to bond with the Headset. you should be receiving the message telling you that this is a Hands Free Device (Yes or No). You better say yes. If you said No, another message pop up twice asking if it is a Handset Device.
2-b- As a test, if you already have the headset bonded, you can go to the devices screen in bluetooth. Click and hold on the device, you should see a shortcut menu with the option "set as Hand Free". Try to select and test the Hands Free
waladany said:
1- Install the merged rom made by sin (you can find it in the forum), as it includes the bluetooth fix. ( This is what I tried)
Click to expand...
Click to collapse
I have the merged ROM by Sin, but still experience the same microphone issues. The CallerID works great, but the microphone on the headset is not active. Both the speaker and microphone on the XDA-II are operating.
waladany said:
2-a- Install the Bluetooth Handsfree fix, I will attach it for you. After installing both updates, you should try to bond with the Headset. you should be receiving the message telling you that this is a Hands Free Device (Yes or No). You better say yes. If you said No, another message pop up twice asking if it is a Handset Device.
Click to expand...
Click to collapse
Are you referring to the registry fix? I think that just makes you able to select hands-free at all. It doesn't fix the microphone problem.
The only thing I've heard that works is the 2.20 Chinese version. But I'm pretty happy with the Sin version. I wish we could find a quick fix for it.
If I've missed a new BT fix from Sin, please post the link here.
Thanks
bt
no way no how will BT CID work fully on even 2.20!! It sucks.
On 2005 it works FLAWLESSLY. But there are bugs on 2005, lack of mem, contacts and email database are new so will not work with many third party software, etc.
Even if you add the reg key "HadsfreeProfileOn", (Sins fix), or have any BT stack or even pray to the bluetooth God, your ****ed on 2.02 - 2.06.
2.20 is ****ty.. If I receive another call while using handsfree, even if I do not answer it, I loose all sound and mic ON BOTH until I click on Tools, Hands free off and then again tools hands free on.
Sometimes the mic - duel speaker things comes back and you have to reboot.
I wrote more here http://forum.xda-developers.com/vie...ghlight=&sid=a355793d319af7acb15784f153f9d7f1
Also, stay posted here, http://forum.xda-developers.com/viewtopic.php?t=19128 we may get help.

WM6 and A2DP

Hi all Gurus!
I was planning to get myself a Jabra BT8010 and plan to get it working with WM6 installed XDA MiniS.
Generally, how is the sound quality of BT A2DP as compared to normal headphones? Are there many issues in BT Stack of WM6 that might prevent nice music experience?
Also, has anyone tried BT8010 with WM6 Orwell's rom? and got it working perfectly fine?
And can we just jot all the issues/problems/solutions faced with WM6 (whether Orwells or PDAViet) and A2DP here in this thread?
Mods, the specific threads are all scattered so I thought I would start off this thread specifically for WM6 and A2DP. Please delete this thread if this topic doesnt require a separate thread.
thanks,
Sid
Works fine on mine with a Sony Ericsson DS910, and an iTech Blueband.
It has AVRCP also, so with the DS910 it supports all the controls.
Quality is probably about the same as A2DP from my K800i, but it is all quite memory intensive, so if you're low on ram it will stutter like a bastard.
i had the PDAviet 3 WM6 and the xound quality on mine was okay..its just a cheap think i bought on ebay that you plug your own headphones into. its eem sto lose some base and sound a bit tinny compaired to the same headphones plugged into my 8125 directly, but that could just be my BT receiver.
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Im Using my Mono SE headset to listen to movies etc on the go and have noticed a bit of a drop in quality from WM5 to WM6, It seems to crackle more on WM6.
Bluetooth range is very good though, I was on a call the other day and someone came to the gate so I got up and went outside still talking on the headset only to realise my Wizard was still on my desk 10 meters away
Jules
totalcmdext said:
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Click to expand...
Click to collapse
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
But used as hands-free has quite bad quality, at least in my case most of the times I have to disconnect the bluetooth and use the phone.
Perhaps the Jabra are better in this aspect.
rodalfa said:
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
Click to expand...
Click to collapse
Can you share the exact location of this key in the registry?
Although my Jabra hasnt arrived yet. I just want to be ready.
--Sid
Got My Jabra BT8010!
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
sids911 said:
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
Click to expand...
Click to collapse
Give this cab a shot. My buddy uses it on his Mini S, says it works wonders. I don't have a a2dp headset yet. I forget what brand he has, it's a something-com I think, the one that folds up.
My BT620s is on the way, I can't wait. I will let you know how it works out.
computer9cowboy said:
My BT620s is on the way, I can't wait. I will let you know how it works out.
Click to expand...
Click to collapse
I got it today.
The damn thing took forever to charge the first time.
I have to say I am very impressed with this thing. Works out of the box with WM6, so far no issues whatsoever. The sound quility is not audiophile level, however it is a lot clearer than I thought it would be!
I was listening to some songs that i have only heard on my crappy laptop speakers and they are awsome. I can hear a lot of things that I couldn't hear before. The bass on these is great.
the best part is that they were only like $60 US, that is less than I paid for my Jabra BT800 a year ago.
I Give the BT620s a 2 thumbs up!!!!!
btw no A2DP fixes have been applied to the Mini S, I am using PDAViet 3 so I am not sure, actually there may be some tweaks in that.
Using A2DP on pdaviet3 with the itech clip IIs headset works great for me:
PROs:
- no skipping after 20 min of mp3 playback
(EDIT: it does drop audio for one sec about 1-2 secs after initial playback, but then resumes)
- not wired headphone sound but pretty darn close
- seamless music pause/resume with incoming calls
- no problems at all with MS Voice Command
CON:
only one so far - people on other end when asked about sound of MY voice said it was a little distant/tunnel sounding (but this is more due to the mic location on the itech)
That being said, I've just "reverted" back to faria's 3.3 rom. Today screen with SPB Pocket Plus/Diary combo seems snappier.
i have wm6 and sonorix OBH-0110, and sound quality if awfull comparing to PC connection with toshiba bluetooth stack. and some cooker said that wm6 bt stack is alot worser then wm5 one.
Hi All,
I dont have this location on my WM6 Orwells: "HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/"
The "Settings" folder and the subkeys are not there. This location was there in WM5 while it isnt there in the WM6. Does anyone know where it has been relocated?
And any settings for A2DP skipping and Music playback speed uneven-ness?
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
AgentSmith said:
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
Click to expand...
Click to collapse
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
sids911 said:
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
Click to expand...
Click to collapse
Yes I created those manually. Now I use Molski's AKU3.3 Crossbow style rom and sound quality improved alot. Still not on the same level as a wired headset but much better nonetheless. As soon as there is a better WM6 rom with working A2DP tweaks I will upgrade again.
An Update,
I used this A2DP fix http://forum.xda-developers.com/showthread.php?t=284974
and skipping went away. Also, music quality reduced.
I uninstalled the fix, and I have the quality back, but songs have started skipping again.
Cant MS provide for a better BT stack in WM6 with all their development prowess??
Would going back to some stable ROM like Molski's or Farias WM5 help?
Faria's WM6 and A2DP
Another update....sighhh
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Seems like I wouldnt be able to enjoy this gift. Why cant things just RUN....
I am guessing, changing ROMs wouldnt help...or would it? Does Widcomm stack work on WM6? Anyone with this experience?
The next ROMs I am gonna try are:
1. WM6 MBE
2. Farias 3.3 AKU
3. Molski's WM5
After that i will try selling my Jabra BT8010.
sids911 said:
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Click to expand...
Click to collapse
Anyone figure out a cause behind the intermittent skipping and speed fluctuations when playing music over bluetooth? I'm using the XDA Mobile 6 release 2a ROM with my BlueAnt X5i headphones. Everything works for the most part. But about 10 to 15 minutes it will drop audio for a few seconds, then start back up again. Annoying but I can live with it.
What's really irritating is the fluctuations in playback speed. For some reason playback tends to speed up every 5 minutes or so. When I skip ahead or go to the next song and it's fine. Then the issue recurs again in 5 minutes... repeat cycle.
I've tried using different mp3's of different bit rates and that doesn't seem to have an impact. I've also tried different players - WMP, TCPMP, GSplayer, Mortplayer, etc. All seem to behave the same way when it comes to variations in speed during playback. Any ideas on this one????

A2DP Issues

Hi all,
Laurentius and I are looking at resolving the current issues with A2DP (Many fixes will be in our latest rom, however issues vary from headset to headset.
Some work fine, others are poor quality and some receive PDA lockups or long pauses between streams.
Please could those with A2DP issues, and the need for this protocol to work properly, post the following information.
The current Rom you are you using
The make and Model of your headset
A list of issues you are currently having with A2DP.
Please also try the following to resolve the issue.......
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
Remove (Delete the following entries)
BitPool
MaxBitpool
and add the following
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:0000003C
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate"=dword:0000BB80
"UseJointStereo"=dword:00000001
Please then remove (un-pair) your headset and Soft Reset
After SR please re-pair Headset and test A2DP again.
Please keep this thread clean and only post A2DP issues with the required information listed above.
Thanks,
Cheers,
Beast
Hi Beast,
Isn't:
"UseJointStereo"=dword:00000000
to get proper stereo sounnd?
Regards,
KOR!
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
gewin said:
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
Click to expand...
Click to collapse
Sorry I meant to say " When the phone comes up turn the headset on and activate A2DP by pressing the button on the HEADSET."
mamiware said:
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
Click to expand...
Click to collapse
Hi Maniware,
Can you please further shed light in detail on the jointstereo?
Why jointstereo to be 1 or 0?
Thanks in advance!
KOR!
It goes well with joint stereo. Seems that it needs much less bandwidth. I've heard that jointstero=1 means that there is mono sound in effect.
"UseJointStereo"=dword:00000001 << mono
"UseJointStereo"=dword:00000002 << joint stereo
"UseJointStereo"=dword:00000000 << stereo
AFAIK
qtek 9000 - Logitech Mobile Bluetooth Headset
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
my feedback:
device:
itech r35
Problems:
sound muted after 2 seconds of music.
audio players used:
audio manager
windows media player
i tried your advices, but not worked for me....
Sometimes it works when i put 70 (binary) on both Maxbitpool and bitpool...but on next device activation or reboot it just stop working...
A2DP and wireless
Just to be clear, my results are when I do not have wlan activated.
I changed UseJointStereo=dword:00000000.
Quality is good and it is definitely stereo.
Still have the auto detect problem. Interesting though, if I walk out of range for a while with the headset on, when I come back into range the A2dp is autodetect and the music starts playing through the headset again, quality is good. If I soft reset with the headset on and A2DP is autodetected, the headset is unusable.
If you do any of this with wlan on the quality is very poor with starts and stops.
Also noticed that audio manager does a better job with bluetooth than gsplayer, I think audio manager may have better caching.
Freezing
I think there's a problem with the latest core os files (AKU 0.7.0)... i havent' tried the MS BT stack, but with the Widcomm, using the bluetooth for anything more than 1 min, completely freezes the phone.
It does when listening music, transferring files, etc... if BT is idle, nothing happens (except than freezing the device when the Comm Manager gets confused and enables BT instead of gsm radio).
So it seems related to the core files.
Switching on and off, transferring data thru BT is a critical task and subject to lockups.
For the record, i used to use the BT A2DP and file transfer without ANY problem whatsoever in my old and horribly-underpowered HTC Tornado (omap850 @195mhz) so IT MUST WORK!
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Hi,
Now that sucks,
I have the same headset HT820 and audio sucks, long pauses etc etc.
Can you post your firmware Revision for me please, it should be printed on the inside of the headband.
Cheers,
Beast
Haha.. can you help my friend Beasty please
He's so happy with his new headset.
rofl......
Cheers,
Leo
@Beast J.K.
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Plantronics Pulsar 260
Sound stops coming fter about 1 second of playback (used TCPM,
Audio Manager)
The same result after applying those reg mods....
Please try and install the stack found here: http://forum.xda-developers.com/showthread.php?t=291639
A2DP problems should go away, but then will come the freeze-after-1-min problems, like with my HP Stereo bluetooth headset
I've flash to your latest WM6 AKU 0.7 (WIFI Fix update 3) ROM just now. But sadly to say, the freezing thing still occurs after playing music with Audio Manager. It even freezes when watching videos using WMP. Usually around 1 minute it shall start freezing. FYI:
Bluetooth model: i-tech Clip
AnnaD said:
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
Click to expand...
Click to collapse
I had the Qtek 9000 with italian version WM5 and i flashed WM6 with no problems. if you dont wanna have any problems unzip the attached file and add in the folder the 3 files (ms_.nbf ; nk.nbf ; radio_.nbf) from your prefered WM6 ROM (I personally use the latest Laurentius & Beast ROM http://forum.xda-developers.com/showthread.php?t=325466) start into bootloader (Power+backlite+softreset) and ROMUpgradeUt.exe
VERY IMPORTANT: you have to charge your batery before any flashing

bluetooth problem w/ patch and voice commander

Hi together,
after all my cruise is now working quite good, and even the odd bt-headset problem is solved after installing the two bt-patches (I´m using Bepe V.0.67).
But now: I can´t commander voice command while pressing the speak button of my Nokia BH-602 headset. This worked before installing the patches.
So: Headset works, but without vc function.
Anybody got a workaround for this problem? Than cruise is almost perfect for me.
Thanks
amcom
That function did not work with my Jabra BT3030 before and still doesn't after the hotfixes.
edit: actually on further mucking about it does work. I have both BT hotfixes installed and it now works.
voice commander now works with my plantronics headset but it never ever dials the right person.. I had a blackberry pearl before this phone and the voice dailing worked even when using a power tool, but the one on HTC sucks real bad
OEMAGW.dll
After patch, OEMAGW.dll chanched, 2x Bigger.
I also want to run MVC BTbutton
This for OEM progs working, but sounds out device speaker
"Path"="\\WINDOWS\\voicecmd.exe"
I found a solution, working for me. After reinstalling an original ROM without MS VC implemented I installed VC seperate. After that I installed a small programm called jetware mobile. This programm routes all signals to the headset.
So everything works fine now. I´m happy, hope you´ll be too!
amcom

Nokia CK-7W with Diamond, it works!

Well, this is not really a question or problem. But just a headsup that the Diamond works just fine with my Nokia CK-7W.
However it would also be nice to hear from you guys (and girls) as well, since I can't imagine I'm the only one with succes!
You might wonder "Why the hell do you post this?!". Well, that's simple because when I wanted to find out whether that Nokia carkit would work together with the Diamond I coulnd't find anything.
And since my experiences with Nokia carkits and HTC phones weren't all that good (read: BAD, lots of echo and weird connection problems) I was pretty anxious to give this a try.
After testing it on another CK-7W, which was already built in a car, I figured it worked perfectly so I took the plunge and got one for my car.
(Before you ask, why no parrot or other brand? I was able to get my hands on this one really cheap.)
The only problem I got was the first time I wanted to pair the device. Every time after entering the 4 digit passcode I got a message saying the passcode was incorrect. Instantly, not even trying to connect. After leaving it all alone for 10-15 minutes and I tried to connect again it suddenly worked without any problems. And it's still working with no issues at all.
ROM I use:
SWIFTBL WWE DIAMOND ROM V7.5
OS Version: CE 5.2.20755 (Build 20755 AKU 1.4.0)
Base ROM Version: 1.93.405.1 UK WWE
So.. more succes stories here? Or problems?
Hi
I have the same setup, Nokia CK-7W in my volvo s60 connected to my MDA Compact IV running swiftbldade 7.5.
It all works perfect.
I even have MS Voice command setup with it and it annonuces incoming callers and messages perfectly and voice dialling works perfect as well.
Call quality is very good as well.
Shaks
Hey - I've got my CK-7W working fine too, except I'd like to also enable wireless stereo... but the option doesn't seem to exist... I bought the CK-7W off a friend, and he was able to use wireless stereo, but I cn't - has anyone else had any success...?
Relly something I want for using TomTom, etc...
Hi i have CK-7W car kit and I am having problems getting my Diamond to pair can you please advise how you guys paired your ones?
Can't say anything more than I just used the normal way to pair, go to bluetooth settings, search for device and select the carkit + enter correct passcode.
I did however have some problems in the beginning. It would find the carkit but after entering the passcode it said pairing failed.
But when I tried later again it went without a problem, and it paired everytime without a problem ever since.
I dont think the ck-7w supports stereo audio. There are however apps that can route the audio over the carkit. BTAudio is one called if I remember correctly. That way you can have the tomtom over the carkit, but quality isn't that good really.
And some say that using that audio routing also gives 'problems' sometimes, as in it sometimes seems like there is audio (e.g. the car radio is muted) but you don't hear anything for a few secs. So that can be quite annoying.
hmmm??? My diamond wont even pick up the car kit during the search!
I had some problems pairing in the first place...
Don't try to search for the car-kit using the phone, just have your Diamond on BT visible to others, and the car-kit will try to connect automatically... I think you might need to hold the button on the car-kit down for like 10 seconds for it to search, but definately let the kit find the phone, not the other way around...
I fitted one of these to my brother in law's car the other day. Tested it with my diamond, but i expected it to be cross compatible.
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Hi Y'all,
I am using my Diamond with the nokia CK-7W and it works fine as well. Paired up without much fuss....
Riel said:
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Click to expand...
Click to collapse
Eh.. none? I find the quality better compared to my old ck3300 parrot carkit. However, this one doesnt have a small lcd display or something. Not that I missed the lcd screen though, but sure was a nice feature.
Best thing about the parrot was that it's possible to put a new firmware on it. Could make them a little bit more 'future-proof'.
Nokia CK-7W with HTC Touch Diamond2, VITO VoiceDialer
Pairing the device was easy. In coming calls are working. Push on the carkit button and I can answer the call.
The problem that I have is that I can't do a voice call. If I push on the carkit button nothing happens. I would have expected that the VoiceDialer app would be started and I could make a voice call. The VoiceDialer app works without bluetooth.
Has anyone an idea how I get voice dialing working?
Remark:
With my pervious cell phone Motorola L6 was this possible. Pushed on the carkitt button, wait on the beep, say the name, when recognized it repeats the name and the number was dialed by the phone.

Categories

Resources