HI,
i have a siemens sx56 and it was locked so i used XDA-developers.exe to upgrading the operating system, but the usb cord connect the pda to pc was disconnected accidentially. so my pda just go blank. I tried to redo it but it won't recognize the pda anymore. is there anyway i can fix it? and install the os on it again?
I think your only chance is to flash via SD-Card....
Here are the instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Related
Everytime I connect my PC to the phone via USB cable, I get a message from XP saying,
"USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Activesync never goes green and I can't flash my phone to a more stable ROM. I just got my TILT 2 days ago and really don't want to be stuck with such a slow ROM. I flashed the phone to the HTC AKU bigstorage ROM before this and everything worked fine. It's just when I tried to flash to the AT&T Rom did I run into this problem.
Any help will be much appreciated. Thanks.
Have you tried rebooting your PC?
If rebooting the PC doesn't do it you may need to completely re install activesync itself. Worked for me....
I reinstalled activesync and now it works.
BTW, is there a way to stop Activesync blinking my programs in and out from being selected on my PC?
setting -> connections ->usb to pc -> uncheck a mark. this should help.
the best idea - change rom to htc, faster, more relible, no sync problems.
my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
I assume you have read the following 2 links? If not, read them now and follow the instructions very carefully.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I had the same problem as you, and was able to restore my Uni with a new ROM using the second link.
But the first problem is getting your PC to stop displaying "USB device not recognized", unfortunately this is quite difficult and I actually didn't manage to do it with my main PC! I had to use an old laptop with USB 1.1 and only then it worked fine, after installing Activesync 4.5.
Basically the Uni sucks full 500mA out of the USB port, so try unplugging ALL other USB devices from your PC first, and if that doesn't work then you will have to try another PC. Some work better than others, maybe you have an old laptop lying around which has at least USB 1.1, or could use a friends PC?
Don't bother hard resetting any more, in this state you can only do normal reset and enter bootloader mode. You will have to try combinations of this whilst plugging it into the PC, and also try different USB ports. Also try entering bootloader mode whilst the Uni is plugged into PC, and try without and plugging it in after.
If you manage to get the device recognized in device manager, and the display change to USB, then follow the instructions in the Wiki above and your device will be restored.
And make sure to flash a ROM that does not include a new IPL/SPL, that means don't use any network default WM5 ROM!!! I used Tomal's 8.0, I recommend that when flashing to recover your device.
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
yasoo157 said:
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
Click to expand...
Click to collapse
can u tell me how u got ur uni working again im still stuck at the screen where it says press x to restore defaults and 0 to exit????
jasjar died
I have exaclty the same problem with my jasjar. help!!! usb is not working .....and how can I find Tomals 8.0 ......
Hi!
i have a realy ****ty problem:
The USB Connection of my TyTN2 is broken. I can't get connected to Active Sync.
USB is not recognized when connecting to PC. The Akku is not charging (also when using the AC/DC-Connection).
The only way to charge the Akku is powering the PPC off.
Any ideas what to do (expect returning the Device to HTC)???
Edit: Flashed back orginal ROM downloaded form the HTC webside using microSD
but im not sure if it has flashed back EVERYTHING to orginal (even the SPL)???
Edit2: ok is there a way to flash the SPL from microSD? CustomRUU can't connect either (loading SPL-1.JumpSPL or SPL1.0.OliPof)
Thanks for your help.
Hi, i have been restlessly searching XDA and the web for a solution to a problem i have with my HD2 (EU version - o2). I normally flash a new ROM every weeks or so just to keep up to date with the latest ROMs and stuff and its just become a hobby of a sort. I have MAGLDR and flashed with "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)". I have been using this ROM for about a week and so now with no problems whatsoever.
The problem i am experiencing now is that i am trying to do a full wipe (task29) using the HD2 toolkit in order to flash a fresh ROM. My USB cable is working perfectly fine and my PC recognises USB when i am booted in Android. But for some reason i get no connection to USB while in boot loader mode. Afer the usual RED BLUE GREEN at the bottom of the screen u get SERIAL when not connected to USB but when i connect it to USB its just blank and not picked up by the PC... Why is this? I dont know, but i sure hope someone can help me out.
Peace
Anyone? Please?
Hi,
I wanted to update an I9003 from Android 2.2 to 2.3.4 JPKP5 (with latona.pit, I used this combination twice with two other phones), I used odin 1.85 for this purpose.
Connected the phone to the PC, it failed to install one of the drivers, but, it appeared in odin... so, I continued :cyclops:.
the operation stopped at about the mid-way and there was "FAIL" and red slot....
Unplugged and plugged it (without restarting, and the progress bar was still there) odin recognized it but couldn't flash again, stuck at "SettingUpConnection"...
I pressed the power button to restart it... then it showed (Phone <!> PC) logo in the screen....
Turned it off by removing the battery, I doesn't boot to recovery nor normal boot...
BUT, I can go into download mode without being apple to connect it to the PC, it shows me (USB device is not recognized) and doesn't appear in odin.
SO.... What is the phone's state and what can I do to fix the problem??
Thank you in advance
you have installed the drivers in your pc? If not yet, install KIES first.
I had the same issue. Even after installing kies my com: port didn't detect . So i reinstalled Windows 7 & installed kies after that. Now odin worked perfect.
Sent from my GT-I9003 using xda app-developers app
I know what you're talking about... the drivers are installed properly and I connect other device to odin properly... I can tell that the problem is because of the device... It's dead for ever!!
I think it is bricked. So try to reinstall the drivers and install any other rom. If it is not working try a JTAG repair.