All
can any one tell me how to increase the volume of the XDa 2i unit. I know about the slider, but I need to make it louder especially when I use the conference call facility. I use this frequently in the car and could do with making it louder.
Any thoughts ideas welcome.
Thanks
Pete
Once connected hold down the green send button. This enables speaker phone.
Related
When I hit my earphone button, nothing happens...I would love it if it would activate voice command....any suggestions?
Thanks!
fernandosaez said:
When I hit my earphone button, nothing happens...I would love it if it would activate voice command....any suggestions?
Thanks!
Click to expand...
Click to collapse
To help, you should tell us that your using ROM.
Ciao
tHANKS FOR ANWSERING.
I have tried it with to roms: Rajus 7.4
and now with psidoc wm5 matrik edition...same thing in both!
Help..please!
Mapping the Headset button,
Actually, thats a good point, but i dont think it is going to be that easy. During a call, the headset button puts the call on hold, and is equivalent to the green button on the phone. As far as i remember there was a thread somewhere a year or so back, and no-one managed to get the button to launch VC. However... that was before WM6
In the meantime, i can only suggest mapping the backlight button to VC.. Thats how i do it!
for me, I just simply press the headset button, and it activates VC immediately. I'm using the Beasty ROM, and a Pantronics headset
Well I changed to the beasty rom, and you are right..it works!
Execept- The button still dosent activate VC, I use the "light" button as someone mention before (thanks), but now my earphone mic does listen to it.
So any clue as how to get the button on the mic to work?
Ideally it would work like this.
Press to answer phone
Press and hold to activate VC
I ride my bike everywhere and that is why this would be IDEAL
THANKS!
Unfortunately, I don't think it's possible to map it like that, the headset button only recognizes press(or in my case, press and hold to avoid mis-clicks). I did it by mapping the button formerly titled "Record"(the one right next to the camera) to VC, and now it works like a charm. Maybe you should try that too!
That's odd - I've always had the ability to use the button on the headset to either launch VC, or answer/end a call without having to do anything special at all.
Maybe it's something to do with the headset you are using? I've got a few, and a Parrot car kit, and they all work in this way.
Cheers,
Steve.
Bluetooth & Wired differences!
Lets tidy this up. I believe that we are crossing lines a bit....
The BLUETOOTH headset button often activates VC... thats not primarily the problem. I believe the problem is the wired headset... that one is the one a lot of people use, and i havnt found a way to make that launch the listening feature of VC as yet.
StevePritchard said:
That's odd - I've always had the ability to use the button on the headset to either launch VC, or answer/end a call without having to do anything special at all.
Maybe it's something to do with the headset you are using? I've got a few, and a Parrot car kit, and they all work in this way.
Cheers,
Steve.
Click to expand...
Click to collapse
oh, that.
It won't work, I'm afraid. That button only acts as an answer/disconnect button, no special functions, and it can't be mapped to anything...
Thanks for answering...so the question...or solution is.....
Whar are the best bt STERIO earphones the except VC buttom mapping?
Million dollar question...
Try googling around!
I can't recommend STEREO BT headsets, I haven't seen any so far, even though I know they exist. Right now, I'm using a Plantronics headset, which is very comfortable, but the transmission power is a bit low, meaning I get some static even with the phone in my pocket, and the headset in my ear...
Been googling..so far NOTHING!
how about this string: bluetooth headset stereo review ?
Headset
mzalan said:
how about this string: bluetooth headset stereo review ?
Click to expand...
Click to collapse
I actually use a conceptronic stereo headset, and that works fine out of box!
On a Fuze, when you're on a call, you can hit the Speaker button to turn on the speakerphone feature. And you can turn it off by hitting the button again. That works great.
Now, pair a Bluetooth headset.
Switching from headset to speaker phone takes many steps: Menu>Headset Off. Hit Speaker phone on button.
Does anyone know of a way to switch the headset on/off like speaker phone? In an ideal world, I'd replace the Video Sharing button with a headset button.
I've hunted around but not found anything remotely similar to this, but I can't be the only one with a problem.
Any suggestions?
Really? Nobody else gets annoyed switching from Speaker to Headset?
Bump. Bump.
Hi, I just got my new Touch Diamond.
Now I have the following problem:
When I plugin the headset (HS S300), I can't adjust the volume of the headset. When i push on the little buttons on the cord of the headset, the phone will call the latest called person.
I'm wondering if I could change the function of those buttons. And how, if possible.
Or is there any other way to change the volume of the headset perhaps?
Thanks in advance!
the same problem i think the handsfree can change the volum
Oh, by the way, I'm using Dutty's ROM (v3.4).
Dear all,
I'd like to write an AP which will change a pda phone's ringing volume while someone call you. It's not while talking, it's before you pick up the call.
I need to change it when it's still ringing. But I don't know which API or registry can I use to change it. I search on internet a lot but seems no one need to implement this kind of function.
If anyone know, please help me. Thanks a lot.
kifklf
kifklf said:
Dear all,
I would like to know how to change an incoming call's volume. Not to change the volume before an incoming call. I need to change it when it's still ringing.
I search a lot but couldn't find a correct way. If anyone know, please help me. Thanks a lot.
kifklf
Click to expand...
Click to collapse
While talking, slide the volume hardware button UP or DOWN. The receive volume level shall change...Simple..
i think he want to change the volume of the ringtone while its ringing.. no idea yet
Actually, it depends on what you're using. if you're using the new Opal volume slider you can't really control the volume.. i dunno why.
trying to search for a solution myself.
c_shekhar said:
While talking, slide the volume hardware button UP or DOWN. The receive volume level shall change...Simple..
Click to expand...
Click to collapse
Thanks. But maybe I didn't say it clear. I modify my post about that.
Yes, it's not when you're talking. It's while it's ringing.
And I want to write a program to do it. So sliding volume key doesn't work for me.And sliding volume key while ringing will make it mute, can't change volume like in talk. So I couldn't send a volume key event to change it. Thanks.
I'll be searching for a solution as i can't change my incall volume at all.. not even while in a conversation.
i'd be happy to have an app which can do that.. both while it's ringing and while in a conv.
Yes, I plan to write a similiar app like you say. But now fail to change volume while its ringing, but in conversation is ok.
When I'm on a call (regular headset or speaker phone) and I press the volume buttons on the left of the phone, the display shows volume being changed up and down. But the actual call volume remains the same which is always loud.
The volume control buttons work for everything else (ringtone volume, Youtube, music, etc.), but just don't change the volume during calls. If there's a way to fix this, I would greatly appreciate it.
shorty87 said:
When I'm on a call (regular headset or speaker phone) and I press the volume buttons on the left of the phone, the display shows volume being changed up and down. But the actual call volume remains the same which is always loud.
The volume control buttons work for everything else (ringtone volume, Youtube, music, etc.), but just don't change the volume during calls. If there's a way to fix this, I would greatly appreciate it.
Click to expand...
Click to collapse
Remove the hearing aid option
az93civic said:
Remove the hearing aid option
Click to expand...
Click to collapse
Wow....so simple...can't believe I never thought to look in call settings. Thanks a lot!
shorty87 said:
Wow....so simple...can't believe I never thought to look in call settings. Thanks a lot!
Click to expand...
Click to collapse
no problem man
Well i can`t find this option. Can you help me a little bit ? thanks.
Im having the exactly same problem. Anyone found this option?
Hello please help me i have same problem i can't control call volume while i am on the call so please anybody help me
Thanks