I flashed my MDA Compact with the Qtek 1.11 software mentioned on this site. The upgrade went very well, and afterwards I did a full restore from a Sprite backup I did before the upgrade.
I have all my previous functionality & settings and device information tells me I have:
ROM Version 1.11.00 WWE
ROM Date: 03/14/05
Radio Version: 1.11.00
Protocol Version: 1337.42
ExtROM version: 1.01.128 WWE
Has restoring my backup negated anything in the ROM upgrade?
Everything works correctly . . .
Well, I must be something of a pioneer! I take it no-one has upgraded the firmware and then restored from a backup? No-one has any idea whatsoever if the backup will overwrite anything from the new ROM image? . . . and I know there are a lot of very clever people on this forum ;-)
Well, my MDA Compact is still working fine, no problems whatsoever to report.
Wow!
Where did you get the ROM from & what instructions did you follow.
Please help as I've looking for this for a while now!
scgf said:
I flashed my MDA Compact with the Qtek 1.11 software mentioned on this site. The upgrade went very well, and afterwards I did a full restore from a Sprite backup I did before the upgrade.
I have all my previous functionality & settings and device information tells me I have:
ROM Version 1.11.00 WWE
ROM Date: 03/14/05
Radio Version: 1.11.00
Protocol Version: 1337.42
ExtROM version: 1.01.128 WWE
Has restoring my backup negated anything in the ROM upgrade?
Everything works correctly . . .
Click to expand...
Click to collapse
flashed mine with Qtek 1.11 and restore fm Sprite backup..so far so good..no problems encountered..
DEEPSAND, I followed instructions in this thread: http://tinyurl.com/863qt
Related
Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?
ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck
where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11
guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....
not working in Qtek S100 any idea????
it works on S100 / jam / mda c
i tried several images with several devices!
good job!
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel
Hi all, can some one please help me with my radio update i get a error 114 radio update error every time.
now i cant send it back beause it has been al ready opend.
The whole thing works fine but after a reset my Camera doesnt work and the volume side buttons doesnt work either (make the thing freeze. stop working)
i am really, really, really out of ideas, almost tryed everything.
The strange thing is that it can update all other things (rom and ext. rom)
Is there a different way of doing this or is my sweet MDA Compact just totaly broken and un-fixable?
device information :
ROM version: 1.06.00 WWE
ROM date: 01/06/05
Radio version: (blank)
Protocol version: (blank too)
exrROM version: 1.06.150 WWE
Really hope that some one can help me.
Hi
I have downloaded several radio rom from wiki and when I run the .exe file it shows my version is 1.2.0 image and it will upgrade to v2.47.21 etc. but when I go to my pda to check the rom version it's not 1.2.0, it's
Radio rom V02.19.21.
Protocol version 4.1.13.09
Ex Rom 2.15.13.121
Why does the program not show the correct rom version, will it damage my pda as I try to upgrade the rom when I had version
IPL 1.00
SPL 1.00.0000
GSM 01.13.20
OS 1.0.13.21
It's stop the battery from charging.
Also since the upgrade from 1 to v2 I get a blank screen when I reply to SMS, couldn't find my phone provider with auto config as the Dopod is from Singapore and I am using it in Hong Kong.
Thanks
The installer used for flashing the radio rom is "hacked". that's why it displays incorrect info. Just proceed witht he install and you should be fine.
I can't help you with your sms issues...
I just upgraded everything with Tomals 8.5 the special build.
At this moment the device info indicates the following:
ROM versiion D.08.50.TML WWE
ROM Date: 02/01/08
Radio version: 1.09.00
Protocol version: 42.42.P8
Are there any incompatibilities between these and Tomals last build ?
I can not make phone calls and I had to remove the battery in order to be able to receive calls.
Can anybody tell me if and what I did something wrong ?
Thank you
PS: the phone is T-Mobile MDA Pro
Have you tested with another SIM card?
I don´t get clear about removing the battery?
As far as I know almost any radio is compatible with Tomal ROM´s (I have tested 1.08,1.14,1.15,1.18 without any problem)
orb3000 said:
Have you tested with another SIM card?
I don´t get clear about removing the battery?
As far as I know almost any radio is compatible with Tomal ROM´s (I have tested 1.08,1.14,1.15,1.18 without any problem)
Click to expand...
Click to collapse
I don't have an other SIM card
I disconnected the battery.
One more strange thing: If I try to access Contacts I get nothing. NADA. The PDA does not take the command.
Apparently whatever is connected with "dial" is not working.
How do I upgrade the radio ?
Thanks a lot
1000QA said:
I don't have an other SIM card
I disconnected the battery.
One more strange thing: If I try to access Contacts I get nothing. NADA. The PDA does not take the command.
Apparently whatever is connected with "dial" is not working.
How do I upgrade the radio ?
Thanks a lot
Click to expand...
Click to collapse
Radio only upgrade can be found in the wiki
good luck
1000QA said:
I just upgraded everything with Tomals 8.5 the special build.
At this moment the device info indicates the following:
ROM versiion D.08.50.TML WWE
ROM Date: 02/01/08
Radio version: 1.09.00
Protocol version: 42.42.P8
Are there any incompatibilities between these and Tomals last build ?
I can not make phone calls and I had to remove the battery in order to be able to receive calls.
Can anybody tell me if and what I did something wrong ?
Thank you
PS: the phone is T-Mobile MDA Pro
Click to expand...
Click to collapse
HI i also had save problem after flashing rom to 6.1 and my radio version was 1.0X. And i wasn't able to receive or make call.... and i upgraded my radio version to 1.15 now it's running good and i also have better reception in compare to raioc version 1.0X...
So i'll suggest to upgrade radio only..
Cheers
I had no problems with 1.09 and no problems with 1.17.
Hi, I need to return my phone to stock settings.. I've HardSPL'd and flashed to HTC's newest official rom.
My phone originally had this:
ROM: 1.90.405.1 WWE
Radio version: 1.02.25.19
Protocol Version: 52.33.25.17W
Model: HTC Touch Pro T7272
I checked with the wiki and none of the stock settings completely fits my phone.
I thought it might be this..
HTC__001 Rom: 1.90.405.1 Radio: 1.02.25.19 Protocol:52.33.25.17U
However as you can tell, the protocal isn't the same.. and it might also be this:
RAPH100 CID: ? ROM: 1.90.401.1 Radio: 1.02.25.19 Protocol: 52.33.25.17W
However, this time the ROM is a bit off.. any suggestions on what I should flash to get my phone back to factory settings?