I have an original imate currently running qtek 1.06. I would like to return to the new imate rom but cannot do to an install error 100 (wrong device).
Any suggestions to resolve would be appreciated.
Cannot decrypt new imate NBF files using existing password
Is it possible Imate updated the password?
Related
Please help me with the following issue:
I bought recently a SPV C600 from ORANGE RO, with the following versions:
IPL 1.00
SPL 1.00.0009
on the green band says Tornado IU
ROM 1.0.9.0
Operator 11.1.10.3
RTL 2.002
So, I wanted to flash with the Imate SP5 software (I-mate_SP5_NRE_1.5.333.0).
I decertified and SIM unlocked the phone (SPV-Services), I erased operator
field from header (with TyphoonNBFTools) but when I tried to update firmware,
the phone entered in bootloader mode, (with RUU at top-right of the screen)
and I received the mesagge "Error 2??: Update Only.")
I used the NBFViewer from the update and saw that the ROM version of imate
firmware is 1.0.8.0, so it's kinda downgrade and I understand that newer bootloaders don't accept that. So, what's your advice?
I tried to set CID -> SuperCID (11111111) with SPV-Services, but again I'm not
allowed to do that (Illegal writezone patch attempt - invalid data) or smth like that.
What are my options? wait for an update that superseeds the present? should i try to emergency flash the bootloader with a lower version? it is ok to do that with a bootloader from imate or ONLY with one from ORANGE firmware? Is there any posibility to SuperCID the CID (wich seems the most convenient sollution, but I couldn't figure out how to do it reading the post from Low-Level Discution topic)?
Finally, the firmware for sp5m is ok for C600, or should I stick with sp5 roms?
Sorry if my english is bad.. but i'm new in this stuff, and any suggestion is welcome.
Thanks,
I tried to flash the Qtek S200 with the ROM which I found at
ftp://ftp.xda-developers.com/Uploads/S200/. But the software said "Wrong vendor ID". CID unlocking way which is used at a Wizard does't work. ROMUpdateUtility_Wizard_NoID.exe does't work also. How can I solve this problem?
flashing difficulties w/th some prophet models
I have had the same issues with my dopod 818 pro..Couldn't flash, always received vendor ID error.
The only way I was able to flash my device to a newer rom was by using JAFWM, which is an aftermarket flashing tool created by Odeon. The device costs about 50usd. With JAFWM I was able to easily flash my prophet to a newer QTEK and Jamin rom, without to much hassle. Note: I still had to use awizard to unlock the CID.
nikolsky2006 said:
I tried to flash the Qtek S200 with the ROM which I found at
ftp://ftp.xda-developers.com/Uploads/S200/. But the software said "Wrong vendor ID". CID unlocking way which is used at a Wizard does't work. ROMUpdateUtility_Wizard_NoID.exe does't work also. How can I solve this problem?
Click to expand...
Click to collapse
try this one
http://www.romupdate.ru/index.php?o...d&id=153&chk=0f5bb214bbf3ccbb915feb4c1c3c7cab
Re: flashing difficulties w/th some prophet models
rcnomad said:
I have had the same issues with my dopod 818 pro..Couldn't flash, always received vendor ID error.
The only way I was able to flash my device to a newer rom was by using JAFWM, which is an aftermarket flashing tool created by Odeon. The device costs about 50usd. With JAFWM I was able to easily flash my prophet to a newer QTEK and Jamin rom, without to much hassle. Note: I still had to use awizard to unlock the CID.
Click to expand...
Click to collapse
I have followed the following thread , download the Romupdateutility.exe and managed to upgrade my Dopod 818 pro ROM to I-mate without vendor error.
http://forum.xda-developers.com/viewtopic.php?t=46548
?s about rom updates changing from qtek rom to imate
Could someone please tell me were i could get the programs that i see you guys talking about. I have the qtek s200 and want to intall the imate jamin rom. When i click on the ftp links it does'nt work. Is there something speacial i have to do to get to the ftp site? Could i get someone to email me the stuff i need to do it?
Re: ?s about rom updates changing from qtek rom to imate
jovan said:
Could someone please tell me were i could get the programs that i see you guys talking about. I have the qtek s200 and want to intall the imate jamin rom. When i click on the ftp links it does'nt work. Is there something speacial i have to do to get to the ftp site? Could i get someone to email me the stuff i need to do it?
Click to expand...
Click to collapse
The JAMin ROM is here: ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip
To install without getting wrong vendor ID, please search the forum.
thank you i will try it out.
rom update utility problem qteks200
i still cant get the romupdate program to work, just keeps saying check your update utility. i have downloaded from a few sites same thing. The program also says smartphone?????
Has anyone managed to upgrade a Orange M600 to the Imate Rom using the ROMUpdateUtility.exe on this forum?
yes, i used imei check to unlock and and set the cid, then used the latest imate rom (2.13.9.23 WWE)
It is much faster in general use and i am sure the screen redraw in tomtom 5 is smoother. other added bonus is no more orange branding!
You can use a modified RUU utility that is posted here bypass the need to change the cid, but you will still be simlocked
Thanks, hopefully my M600 is in the post at the moment
Would like help
I also have a UK orange M600 locked to Orange and would like to put the I-Mate rom onto it.
What files to I need to get.
What is cid
Do I need to have my phone unlocked 1st.
Could someone please give me a step by step how to instruction on how the process is done.
Is it totally successful in all ways.ie does everything work.
Can I make a backup of the original rom.
Many thanks in advance
Stephen
Got my M600 today and flashed it straight to the Imate Rom. Always prefered the Imate software.
No you dont need to unlock the phone before flashing. just search the forum for the guide and file needed to flash any Rom. Very easy.
Does it work
Ok
Does it all work ok ie
Bluetooth
WiFi
Ird
Internet
MSN
What was the name of the file or files u used and how did you do it
well i CID unlocked using aWizard, and i SIM unlocked using Lokiwiz (all this is on these forums) and then i decided to flash my spv m600 to the latest arabic i-mate jamin rom.
it all went well and works fine, only problem is the arabizer suite, it installs but doesnt run, error message displayed is: cannot run on this device.
its kinda strange coz iv always used imaginet arabizer suite on any device, and not one that was originally an i-mate.
any help on this is much appreciated.
p.s. i thought id post this in upgrading as it is related
Hello, i was able to upgrade my I-Mate upgrade with a cooked rom (some kind of WM6.1 with All Languages but it's really unstable...). In short, i'm tired of this WM6.1 so I decide to downgrade the phone to WM5, it's was stable and fast but without spanish. After reading the post Imate SPL 6.1 ROM i found the RUU for the original version of I-mate SPL with WM5, but after running the RUU application an error message apper just before flashing "ERROR: Invalid IPL File blah blah blah".
I've also tried the SD method, but the screen goes White and nothing happens. Is there a way to downgrade from WM6.1 to WM5 using the RUU? or can I override the IPL and "force" the flashing?
Thanks in advance