Please help me with the following issue:
I bought recently a SPV C600 from ORANGE RO, with the following versions:
IPL 1.00
SPL 1.00.0009
on the green band says Tornado IU
ROM 1.0.9.0
Operator 11.1.10.3
RTL 2.002
So, I wanted to flash with the Imate SP5 software (I-mate_SP5_NRE_1.5.333.0).
I decertified and SIM unlocked the phone (SPV-Services), I erased operator
field from header (with TyphoonNBFTools) but when I tried to update firmware,
the phone entered in bootloader mode, (with RUU at top-right of the screen)
and I received the mesagge "Error 2??: Update Only.")
I used the NBFViewer from the update and saw that the ROM version of imate
firmware is 1.0.8.0, so it's kinda downgrade and I understand that newer bootloaders don't accept that. So, what's your advice?
I tried to set CID -> SuperCID (11111111) with SPV-Services, but again I'm not
allowed to do that (Illegal writezone patch attempt - invalid data) or smth like that.
What are my options? wait for an update that superseeds the present? should i try to emergency flash the bootloader with a lower version? it is ok to do that with a bootloader from imate or ONLY with one from ORANGE firmware? Is there any posibility to SuperCID the CID (wich seems the most convenient sollution, but I couldn't figure out how to do it reading the post from Low-Level Discution topic)?
Finally, the firmware for sp5m is ok for C600, or should I stick with sp5 roms?
Sorry if my english is bad.. but i'm new in this stuff, and any suggestion is welcome.
Thanks,
Related
i'm trying to upgrade a second hand bought qtek s100 (presumably a magician). i hoped it would be a piece of cake, being a qtek device (thus sim and cid lock free). the simlock part is correct, any sim will work. but the cid lock free part does not hold. i tried several rom upgrades from the shipped rom section on the xda server:
nl113 rom (i think this is the tmobile rom)
the uk wwe 112 rom
the wwe 112 rom
the wwe 113 rom
and so on.
i also tried the xda unlock tool, hoping that i made a mistake and that something was still locked. after running it, it told me that unlocking worked (but it was already simunlocked to begin with). but still afterwards, running any of the above roms still didn't work. still country error.
with all the roms i get an country 112 error. even with the original qtek roms? i tried both the uk and wwe rom (not quite sure if this is a native dutch s100 or an expansys (uk) s100). did not matter, both didn't work. never had so much problems with my mda vario.
current rom is radio version 1.05.00
protocol version 1337.39
rom version 1.06.00wwe
extromversion 1.06.154wwe
maybe someone can shed some light why my qtek s100 does not take any of the shipped qtek wwe roms?
many thanks for reading my thread (and hoping for your suggestions)
solved it. just needed to run the MaUpgradeUt_noID.exe. then it stated the current rom and so on, after which it gave an country error while putting it into bootloader menu. then i ran MaUpgradeUt_noID.exe again while the qtek was still in bootloader menu, now the summary sheet stated blank at the rom version and so on. now it was able to upgrade correctly. for those like me who have the same problem, just run MaUpgradeUt_noID.exe twice and immediately after the first attempt!
Help!!!
My orange spv c600 is stuck in bootloader after updating to wm6, i downloaded the orange firmware again but it wont install so i can even get back to wm5.
bootloader says;
Tornado
IPL 2.00
Tornado
SPL 2.00.0008
Tornado UI
USB
Any suggestions?
Thanks
deactivate usb connection in active sync.
run spv-services to make sure you have superCID (3131313131 in a long string of numbers in the CID tools option)
make sure you are CID unlocked
use teratermpro to format BINFS
reinstall radio update
reinstall wm6
or just look a couple of posts below
http://forum.xda-developers.com/showthread.php?t=318677
sorted, thanks alot
Hi
I have a Tornado in o2 IQ guise, it is not CID unlocked. When I turn it on I get the o2 splash screen before it goes into bootloader. I tried hard rest but that didn't work so I tried flashing differnt rom, which is how I found that it was still CID locked.
I have tried the solution at http://forum.xda-developers.com/showthread.php?t=388109 to change .nbf header to match that of my phone but this doesn't seem to work Typhoonnbftools just spits out a 1kb .nbf file.
Bootloader reports:
IPL:2.00
SPL: 2.00.0011
Tornado 1U
USB is available and can communicate with the phone using TerraTermm Pro I have tried format BINFS but I'm told "not allowed operation". I really need an o2 UK rom to flash back but it isn't on their site. I looked on the xda-dev ftp but the rom on there is german and has different vendor ID.
Can anyone help?
Thanks
Hi i'm sujeewa,
I have HTC X01HT HERM200 handset and it is locked. it appears USIM if it turn on. on the overhand it has Japanese ROM and i need to unlock and convert to English.
I read a lot of threads of this site but i was unable to do it.
it's
IPL - 1.01
SPL - 1.09
when i try to update ROM, it prompt "260 update error".
please help me.
Hi i'm sujeewa,
I have HTC X01HT HERM200 handset and it is locked. it appears USIM if it turn on. on the overhand it has Japanese ROM and i need to unlock and convert to English.
I read a lot of threads of this site but i was unable to do it.
it's
IPL - 1.01
SPL - 1.09
when i try to update ROM, it prompt "260 update error".
please help me.