Has anyone managed to get full Internet and Messenger on O2? If so, please could they let me know how they managed to do it?
Thank you.
If you get a working phone (looking at your profile you have an XDA1?) then it should arrive in a working state.
On my XDA1 and 2 (hopefully 2i tomorrow!!) I was able to get straight onto the net and MSN over GPRS without any problems. There was an issue when I first got the 2 due to it being a duff phone, but that was MMS messages not working correctly. Once they replaced it for me it's worked a treat since.
However, the following file may help you...it's been on this site many times before and should (at least on XDA2's, you might want to check for 1 if that's what you have) set up your net settings correctly.
Cheers
Anthony
I should have specified that I want to get on the Internet and use MSN with O2 pay-as-you-go and not contract - is there anyway I can get the Internet with PAYG? Will the above method and file work on an XDA?
Related
Please, if someone knows how to configure the Blackberry service on WM6 please let me know...
i believe you need service for it.
I think he wants to know how to configure it.
I had problems on my Wizard as well. Can't seem to pickup an IP even though I have service for it.
rupture said:
I think he wants to know how to configure it.
I had problems on my Wizard as well. Can't seem to pickup an IP even though I have service for it.
Click to expand...
Click to collapse
Same problem here.. I have the service, I got the PIN and all stuff but never get connected (no IP)
Any advance / tip / anything on this issue???
Pin not right
After several hours with Tmobile and Blackberry Support, they tell me it will not work on my wizard because the pin is not a correct pin. The guy from Blackberry told me that Tmobile did not pay for this kind of support and that he would not be able to get ti to work. I got an IP, I even was able to send a service request and it come to my phone, but nothing ever would work besides that. I had the blackberry plan from Tmobile and never could get it to accept my pin. Any help would be appreciated, I miss push email.
i am havin the same problem with my wizard using orange
http://forum.xda-developers.com/showthread.php?t=294218
I didn't test the above tutorial, but some people are claiming that it is working... can anybody tell me if:
(1) it is working?
(2) is there a rom that already includes this patch?
If this has been covered before and is known to work then feel free to lock or delete the topic
Apologies if this is common knowledge but I spent an entire day on this on Wednesday without any joy but have just managed to crack it and get my phone talking to my TomTom via GPRS and thus re-enable all my TomTom plus stuff.
Okay, so the key here is application unlocking the phone.
Because the Vodafone v1415 is still pretty new in the UK (and therefore I guess uncommon) all the instructions I could find refer more explicitly to the HTC S710 and it has been a bit unclear exactly how much or how little Vodafone have monkey'd about with it before selling it on.
I've managed to establish that they've done quite a lot! And it's certainly appllication locked.
I just went through the thread about removing a lot of the branding but the bit that didn't work was the registry editing as I just got Acces Denied. After a quick search I followed the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=280710
And got my phone un-application locked. I suspect this is not 'unlocked' as in how most UK people find their phones to be SIM locked (not Vodafone incidentally) which is why I continually make the distinction.
After then successfully editing my registry so as to change the appearance a little I then wandered if it would have any impact on what I was trying to do the other day about the BT DUN issue (or lackof).
'Lo and behold I reinstalled the cab file (WM6_BT_DUN.cab) that I had found in a thread on these very forums, rebooted the phone and bingo, the TomTom then connected (which it did before), the phone gave DUN as a capability (which it did not before) and everything proceeded as it used to with my Nokia 6230.
You'll need to search the forum to find the thread with that file since I can't remember where it came from but it was a hot topic so I really doubt it will be at all hard to find.
I'm chuffed since that was a real show stopper and I was going to return the phone and cancel the contract but now in one afternoon I've got rid of most of the crappy branding and resolved the last issue with it
So, big thumbs up again to these forums and to offically mark the WM6_BT_DUN.cab down as working with the Vodafone version of the Vox as long as you unlock it first as above.
So, now that I've finally covered all the setup of my phone I can get down to some of the developy type things that I bought it for in the first place (well, free on contract but hey!)
Oh, probably worth noting that I did all this on an iMac too (with a little help from VMWare here and there)
The CAB is available at http://forum.xda-developers.com/showpost.php?p=1351044&postcount=21
DUN
...does anyone know if the Cab files has been ammended yet to deal with the issue of once a DUN call is made...it keeps the connection open until the phone is reset?
In this case, Activesync via GPRS does not work ( get a message about "cannot connect whilst a voice call is in progress) and I;m also worried about the cost of the DUN call charges?
bennyk said:
...does anyone know if the Cab files has been ammended yet to deal with the issue of once a DUN call is made...it keeps the connection open until the phone is reset?
In this case, Activesync via GPRS does not work ( get a message about "cannot connect whilst a voice call is in progress) and I;m also worried about the cost of the DUN call charges?
Click to expand...
Click to collapse
Can anyone help with this.
I use activesync to connect to MS Exchange at work for MS Outlook email. I was looking to install the BT DUN workaround on my Vodafone v1415 so that I could access the TomTom Traffic service with my TomTom GO520. If I install BT DUN will it break my GPRS connection used to Sync with MSExchange at work.
Can yuo tell me which directory you need to copy the CAB files to on the phone?
I have tried to mess around with 6.1 lately and for some reason I am not able to figure this out.....
I get everything working, for what I think but then I keep having problems with the MMS. I will send my wife a test message and it takes over 3 hours to get to her. When I am running WM6 with radio 1.27.14.09 it works fine, takes less then 2 minutes to get to her phone.
Now before you start grilling me, I have done a google search. I have found problems such as
1. unable to send at all - not my problem
2. MMS not working - not my problem again (works just really slow)
3. Use this cab, use that cab, I have tried them all they don't change the issue
4. Make sure your going through MEdiaNet - I am
So what I am asking, is anyone else experiencing this problem???? The only thing I have looked into is it possibly an arcsoft issue???
I don't know if this will help, but I'm finding that with the 6.1 roms on AT&T that if you allow the Network Configurator to run, various things don't seem to work quite right. I was having issues with WeatherPanel not working on the AT&T network. I've now flashed 3 different 6.1 roms in the last couple of days and did not allow the network config to setup the AT&T settings, and then disabled it (when the next screen came up). After doing this, I then ran the remove hidden proxy cab and the WAP/MMS setup cab and then did a soft reset. Now MMS works fine (I never had the 3 hour delay you described, but I did have other issues with MMS on some of the roms) and WeatherPanel also now works (haven't had a problem with it in over 24 hours where before it might or might not work, then would stop working a few hours later).
Like I said, may not help your situation, but something to consider and try.
NOTE: The method I just laid out will NOT set up isp.cingular. Only Cingular GPRS and MEdiaNet. This is how I used to always run my Wizard and dumped the $40 per month PDA Connect plan for the $20 per month Unlimited MEdiaNet.
I could hug you!!!! Oh my god, do you feel my love...do you feel me humping your leg!!!!!! It worked,,,,absolutely amazing....Thank you!!!!
Glad it worked for you, but wow, not sure about the extent of the emotion you are sending in my direction... LOL
So for future people that hit this, did you remove the other settings, just install these two cabs, hard reset and follow my above directions, or what? Just curious myself as I'd like to get to the bottom of what goes wrong (or is missed) with the Network Configuator process for AT&T.
To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!
if your phone said message sent then it arrived 3 hours later to the recipient then its a network problem not really to do with your phone but just incase look at other radios.
ryncppr said:
To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!
Click to expand...
Click to collapse
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab
AllTheWay said:
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab
Click to expand...
Click to collapse
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.
mfrazzz said:
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.
Click to expand...
Click to collapse
It changes some TCP parameters and puts in the IP header compression and the DNS servers.
I really do not know what the problem is.... those didn't work either. It honestly might be something in my area, South Florida. I tried with the new radio, those files and vice versa. I am dumfounded.
As soon as I flashed back to 6.0 and used the 1.27 radio it sends immediately. It must have something to do with the radio and my area.
I appreciate all the assistance
I have the same problem. I received my tytn II 2 days ago. Previously I used the se K800i. With the k800i, there was never a problem when sending sms messages. Always very fast to send and receive but now on my kaiser, it takes a long time before my messages are received or till I receive an sms message.
Still on the stock rom version 1.56.404.6
radio: 1.27.12.32
Windows mobile 6 professional.
Hmm I just got back to Kyoto from a trip to New Zealand and found that my phone will no longer connect with the opensoftbank connection. THE PHONE CAN BE USED AS NORMAL. Anyway, when connecting to the internet, I get the following error:
"Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason"
Neither installing of the connection .cab or the wifiwake method , with the correct wifiwake, nor even putting the password in by hand, worked. I have tried several different roms. Of course, I did the usual and checked the connection to make sure password was actually inputed, etc. Anyway, I am sure I know what I am doing since I have been doing this since the Hermes; and remember, the think worked before leaving Japan.
So, I thought perhaps I had a phone problem. Well it appears not. Installing the original softbank rom works! Anybody else had any similar issues of late? Strange indeed.
UPDATE: On the original Japanese ROM I deleted the original settings (which are hidden by the way) and manually put the opensoftbank settings in and all still worked. Now, get this: I installed jmckeejr's Chrome 23037_Beta2 and even put in the autosettings (the vodafone [email protected]) just to see if it would let me connect... it did not. SO, neither the old vodafone nor the softbank open settings appear to work. Damn, makes me think softbank have clamped down on us, somehow... Anyone got any good ideas, please let me know.
Softbank seems to have stopped service to my phone this morning as well. It was fine yesteday, I've been paying my bills and using the data connection very modestly.
For me, however, it's not only the data connection that won't work anymore but I can't even make phone calls. I reinstalled the 6.1 official Softbank rom and this didn't help the problem. Something strange is going on here.
Hi Jonathan. I hope you could solve your problem. I solved mine by installing the latest NRGZ28 EnergyRom Warhawk. It worked fine. It seems that some of the later roms than this (released around end of Aug/beginning of Sep) do not work with softbank's connection settings.
I will do a little more poking around to see if I can find out any more information as to what may be causing the problem, as at the moment it is all a mystery to me. Cheers.
Hello All,
I hope that someone can help me because I have a strange problem.
I have just bought a LG GW910 phone. The phone seems to work fine (calls, web-surfing, wifi etc) but if I am using my data connection (NOT WIFI) I cannot connect to any HTTPS sites. This also means that I cannot sync my phone with my exchange server across my data connection.
I have testes if across WIFI and it works fine.
I have also tested it by turning off the SSL (and making the necessary mod on the server of course) and then it also works fine, but I don't want to leave it sending my password in cleartext.
Can anyone help? Is this a bug in WP7 or should I send my phone back.
I would be very grateful if people could answer asap so that I can arrange to send this phone back if necessary.
Thanks.
nebc100
given that you're the first to report it i might suggest speaking with your carrier about it?
Thanks for the comment! I would have thought the same thing if everything had not been working perfectly with my Touch Pro 2.
I cannot explain it, but I have managed to solve the problem.
I had tried resetting the phone and it hadn't helped.
I then tried (just to see how well it worked) doing a remote wipe of the phone (I had temporarily configured by exchange server not to require SSL). I then pannicked for about 40 minutes while my phone sat there with the LG logo and not starting.
FINALLY (YES... it takes AGES!!!) it started, and I configured it EXACTLY the same way as before, and now it works.
I honestly cannot explain it!
If anyone can come up with an explanation, I would LOVE to know.
Nick
well good to see you got it solved.
if i may: where did you acquire an LG GW910. is that not a developer phone? as in, not in the market? (it was actually the one WP7 that enchanted me the most.)
Hello,
I bought the device on ebay for €200. The price was certainly interesting!!
Sadly however, the problem that I was having yesterday has started again!! It is very strange!! It worked perfectly for approx 2 hours, and then at 00:40 this morning, it stopped. Now, again, I cannot access any form of https site (for exemple: www.live.com won't work as it directs me to an https site.) if I use the data signal. If I use WIFI it works fine!!
I am just trying another remote wipe of the phone to see if this solves the problem again.
Does anyone have any idea what could be causing this? Bad memory chip????
WORKING!!!!!!!
Hello All,
Problem officially solved now... phone been running fine since Saturday Morning.
It seems that the problem was partially due to my service provider, and partially due to a mistake that I made.
I connect through Orange Luxembourg (Formerly VOX). They have 3 APNs: vox.lu (their old APN that still worked perfectly with my Touch Pro 2), iphone3g.lu (which they implemented when they got the iphone) and then one that I have never used before: orange.lu
I had tried vox.lu and iphone3g.lu and they both worked fine for HTTP, but not for anything secured (HTTPS, SSL etc).
On Saturday morning, I suddenly remembered that there was the orange.lu APN and I tried it. The phone has been working perfectly since then!!
I can't explain why this APN works and the others don't, but I am not going to complain. It is now working fine, and to be honest, I am very happy with WP7. OK... it has some missing functionality, but I am sure the MS will sort out some of these issues given time.