Related
Hi All, excuse this, I have tried everything else including the i-mate site who leave alot to be desired ( I was goin through the process of upgrading my Jasjar to WM6 & did not follow the instructions asa you do... My Jasjar has now totally reset itself back to the basic screen without windows installed so it seems, all I get is a blank unpowered screen with v1.00 at the bottom, have tried plugging it into my USB port, which just says it does not recognise it. I have also lost my WM5 CD, so can't even restore from there.. can anyone advis me what to do next.... i'm pulling my hair out (what little of it I have )
Thanks
NP
Just restart the OS load, try in with the MaUpgradeUt_noID.exe , and that is it!
Oh happy days!! Logged into the main screen this morning & there it was, reseting your device from bootloader screen.... Now to upgrade to WM6
Where would all of us Mr Average PDA users be without you guys!
Thanks
Hi all I know there's been many a post about being stuck in the bootloader and I even went to the wiki to see what to do.
Firstly, when following the wiki (http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader) on the mtty_utility there is no option for USB only comm 1, 2, or 3 (am i being stupid?).
Secondly, I had a guess and tried all the comm's and eventually comm three seemed to be the only one working, but when I type in the commands it does not do anything.
Any help would be greatly appriciated as I would hate to see my uni go its been so good to me.
Thanks in advance
Jo
Please help
The USB option is at the very bottom of the list. Unless your PC isn't registering the ports, you should be able to get MTTY to work for that part at least.
Thanks for the reply but there wasn't a USB option, I've tried everything, I think it may be to do with vista continuously wanting to run mobsync.exe whenever I plug the uni in but there's no way to stop it.
I've tried ending it as a process but mtty still doesn't have the option of USB.
If you have any ideas please post them, am I right in beleiving that you cannot charge in bootloader mode? Or is that just off the USB?
Thanks
Jo
P.S. The laptop I'm using can read other things through the USB ports, and I have tried every port just to double check that they are not all on the same line (ie an internal hub).
I think it may have something to do with Vista... I'm not sure as I don't have a Universal...
If you have access to XP it may be faster and easier...
I think you may be right
I shall wait untill my housemate gets back in, if it doesn't work in safemode!
Cheers for your help anyway!
I shall keep all informed just in case anyone else ever has this problem
Got it working!
Right finally got it working! It took some time but I managed to revive it!
1) Connect your device in bootloader (Hold light button, power button, and reset),
2) Open Windows Mobile Device Center and in connection settings uncheck Allou USB Connections,
3) Goto contol panel-administrative tools-services and start windows mobile device connectivity and windows mobile device 2003 connectivity,
4) goto device manager and find your device and update the driver to the one that can be found here: http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista (it is the one in the modem folder, do not follow their instructions, it will not work in this case),
5) Open task manager and kill wmdc.exe, or anything with wm infront of it, also kill mobsync.exe
6) Goto: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader and follow the instructions (you should be able to see USB as an option now).
In mtty it took a couple of commands before it actually executed then once finished it looked as though it were completely dead, but connect the uni to the comp again in bootlaoder mode and all should be well!
With Reference to:
http://forum.xda-developers.com/showthread.php?t=291723
PS could someone put this in the wiki under the title "If mtty does not have the USB option in vista" I'm being a dunce and don't really know how to do it
Hello.
I asked the forum search about it, but cant find really an helpful answer.
I do have strong problem with Active Sync. Sometimes it works, sometimes it doesnt. Sometimes, I got to install Active Sync new or drop out the device and add it new to get it done.
Button for fast data connection at the Touch Pro is enabled. Working with 4.5.0 and XP.
Can someone please get me a tip?
Hardware Problem?
I had the same problem with my TyTN II which is the reason I switched to Touch Pro.
The problem I could not synch was because of the MiniUSB connector. I had to change the main board twice. So now my wife owns the TyTN II
i solved that problem by changing another usb slot (it didn't work with USB from my monitor...)
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
drdurango said:
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
Click to expand...
Click to collapse
Have you disabled "advanced network functionality" in Settings>Connections>USB to PC ?
also try reinstalling active sync again...
@Wonkotehsame:
Yes, I disabled this function.
@ yahu:
So I did. Not just one time, many times. Always after reinstalling, it workes. Some time later, I am loosing connection.
Also, if I try to copy larger files like GPS software with appr. 1,4 Gb the transfer to the Memory card stoppes with the failure message: no such file found.
Can this be something along with the Active Sync problem?
I too have problems with this. ActiveSync says phone is set up to sync with a different computer, but it's not.
Still nobody any hint for this problem?
My problem is a little bit diferent...
My vista won't sync with my Artemis, but it syncs with my Glofiish M700..
If i change the PC (OS XP x64), the artemis syncs.....
So, my Vista Notebook is angry with my Artemis... neither USB/BT sync can be done...
Nice to hear that a lot of people have similar probs ;-)
What I have done now, deleted all of my connetions features/partnerships and made all new.
For now (maybe until Monday...) it works, but now I dont get a folder on the desktop of my mobile device. Is this an optional setting? Can someone tell my how to do?
I dont believe that NOBODY has an help for this problem.
As of today, no Active Sync in any ways is possible with my phone. Even not if I make a new installation.
Also; I made sure that all Anti Virus and Firewalls do allow all 3 Active Sync Files.
What can I do else???
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
drdurango said:
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
Click to expand...
Click to collapse
Looks like you are on your way to finding the root cause. I would try the same computer but a different user to see if it is related to the user setting.
This is what I have done last night. 2nd user, installed OL new and also Active Sync.
Nothing. Same problems.
I restarted the Desktop AND the device several times.
Nothing.
But, when I came this morning, it worked the first time.
The second it failed. I will go and purchase a new Desktop for the thanks of Mr. Microsoft!
has anyone found a real solution for this problem?? mmy computer recognizes the phone a a disk drive bt active sync does nothing. any help would be greatly apprecated
I'm getting this too. Sometimes ActiveSync works, sometimes it doesn't. I can't figure out what causes it to work and not work...
Theres only two possible solutions I know of from all I've ever heard of the problem:
1. Settings-->Connections-->USB to PC. Also, I know the prompt asking you if you would like to use as a disk drive comes up if you've set your phone to be read as an sd card reader. If the pop up annoys you, try removing the SD card and trying again.
2. Hard reset.
Sorry if it doesn't seem favorable to you guys.
I've asked before but haven't come across anything that helps. My Fuze, with hardspl and the olipro unlocker and a 6.5 rom (TAEL) now doesn't show up on USB. I get the USB Device Not Recognized error with a listing of Unknown Device in the detail window. Cycling the high speed USB resets the connection but does not resolve the error. My old Tilt works fine on the desktop and on the laptop. The Fuze does not work on either. I was unable to replace the serialUSBfn.dll file even with Total Commander as the file seems to be in use. I hard reset the device and finally reflashed the phone by SD in an attempt to replace the file. This wiped my associations in ActiveSync so I can't sync or for that matter set up the phone for the first time over BT.
I also tried to get it to be available from the bootloader with no success.
I've checked the USB contacts on the phone, reset the power on the device and the PC, etc. I've found many tips but none that have helped.
So, my questions are, in no particular order are:
(1) is there a code element that is passed to the PC upon USB connection that I need to replace, such as a bootloader? Can this be done by SD flashing?
(2) If this is hardware problem and USB is dead, can my contacts be loaded in a single action by a data file import by email or SD?
(3) Can BT be used for an initial sync through any unusual process?
(4) Should I re-run hardSPL or the Olipro unlocker to reset anything?
(5) Does anyone have any other suggestions?
(6) Is this a dead phone that need to go somewhere for service?
Bob Simons said:
I've asked before but haven't come across anything that helps. My Fuze, with hardspl and the olipro unlocker and a 6.5 rom (TAEL) now doesn't show up on USB. I get the USB Device Not Recognized error with a listing of Unknown Device in the detail window. Cycling the high speed USB resets the connection but does not resolve the error. My old Tilt works fine on the desktop and on the laptop. The Fuze does not work on either. I was unable to replace the serialUSBfn.dll file even with Total Commander as the file seems to be in use. I hard reset the device and finally reflashed the phone by SD in an attempt to replace the file. This wiped my associations in ActiveSync so I can't sync or for that matter set up the phone for the first time over BT.
I also tried to get it to be available from the bootloader with no success.
I've checked the USB contacts on the phone, reset the power on the device and the PC, etc. I've found many tips but none that have helped.
So, my questions are, in no particular order are:
(1) is there a code element that is passed to the PC upon USB connection that I need to replace, such as a bootloader? Can this be done by SD flashing?
(2) If this is hardware problem and USB is dead, can my contacts be loaded in a single action by a data file import by email or SD?
(3) Can BT be used for an initial sync through any unusual process?
(4) Should I re-run hardSPL or the Olipro unlocker to reset anything?
(5) Does anyone have any other suggestions?
(6) Is this a dead phone that need to go somewhere for service?
Click to expand...
Click to collapse
When you attempt bootloader mode does USB show up on the tricolour screen?
bootloader now shows serial, not usb
since I attempted to set it up on BT to try to sync it that way, it now says serial, and in fact the mobile device shows up on My Compuer and I can see all folders and so on. If it matters, the SIM is out in the Tilt at present. Prior to setting up BT pairing it had been showing USB.
with usb cable attached, bootloader mode says nothing. pulling the cable in bootloader mode, it then shows serial.
These problems started after I set Activesync to exchange mode: does this change a hardware setting that is not reset by flashing or pulling the battery?
Not sure if it will help.
If you can I would rerun Hard SPL and Olipro. That is where I would go. I am no expert but hey, no one else is responding.
Bob Simons said:
since I attempted to set it up on BT to try to sync it that way, it now says serial, and in fact the mobile device shows up on My Compuer and I can see all folders and so on. If it matters, the SIM is out in the Tilt at present. Prior to setting up BT pairing it had been showing USB.
with usb cable attached, bootloader mode says nothing. pulling the cable in bootloader mode, it then shows serial.
These problems started after I set Activesync to exchange mode: does this change a hardware setting that is not reset by flashing or pulling the battery?
Click to expand...
Click to collapse
Try another USB cable.
Have you ever flashed w/ microSD? See how 2 do it in the first threads in this forum...
Try this procedures:
1st - HSPL;
2nd - Stock ROM;
3rd - Cooked ROM...
Hard Reset after each step
See if it worked
try to go to settings>connections> USB to PC; then uncheck (Enable advanced network functionalty).
then try again.
I've tried multiple cables and have changed the settings
as I say in the post.
I have an HTC HD with stock rom
I recently had to change my sd card for a new one.
I hard reseted to reinstall all my programs.
Bluetooth sync is ok but NO MORE SYNC BY USB NOW !
So I cannot install net CF 3.5 or sync music or GPS maps (files take too much time 'cause too big) ...
I have hard reseted my device, uninstalled and reinstalled WM device center latest version, unchecked "activate advanced network" in "usb to pc settings", deconnected my firewall and anti virus; tried active tweak freeware; changed cable ... NOTHING WORKS. No connection, no sound, no error message...
Please help !!!
If put your HD into bootloader, and you connect it to the pc, does the text 'serial' change into 'USB'?
If so, there's nothing wrong with the drivers so we need to look further.
If not, your drivers do not work.
Let me know if the text changed or not, then I'll see if I've got some solutions for you.
Hi Condor.
I don't see any change when I do as you told me. Serial doesn't change into USB.
Thanks for your help.
Finally had to bring my phone for repair. The motherboard has been changed. Now everything's OK.