Qtek 2020 + datasync/charge USB cable (sold w/Arkon CM745) - MDA II, XDA II, 2060 Accessories

Hi everyone!
I have bought the car holder Arkon CM745 and with this I have received also the USB Charge/Data Sync Cable. When I plug Qtek 2020 by this cable with car holder, or when I plug it with my mobile PC (to charge), Qtek try to start Active Sync session and goes in error because Active Sync there isn't (car holder) or it isn't properly configured (mobile PC)... in fact Qtek tries to start a GPRS session to synchronize, but it fails... How I can disable this auto-start Synchronization when I use this cable, and instead leave the auto-start when I use the PC-Desktop holder/charger?
Thank's
IN ITALIANO:
Ciao a tutti!
Ieri mi è arrivata la basetta per auto della Arkon mod. CM745 che fra
le varie cose ha in dotazione anche un cavetto di 10cm per connettere
il Qtek alla basetta e permetterne la ricarica. Il cavo dovrebbe anche
permettere la sincronizzazione Active Sync perchè è un USB Charge/Sync
cable. Ma ogni volta che lo uso (in macchina o col PC portatile), il
Qtek cerca di avviare la sincronizzazione dati, apre la connessione
Vodafone_GPRS (forse non trovando l'Active Sync in ascolto) e quindi
da errore perchè la sincronizzazione remota non è configurata! Come
disabilito questa procedura solo per questo cavetto e non per la
basetta collegata al PC di casa e con cui effettivamente sincronizzo
tutto?
PS: per gli interessati alla basetta, una piccolissima nota dolente...
il cavetto audio in dotazione, con o senza adattatore, non si connette
al Qtek. Quindi, a parte ulteriori adattatori, non è possibile
attaccare l'audio del Qtek ne alla basetta da macchina (vivavoce) ne
all'impianto audio car (Ingresso Aux per MP3, WMA, WMV, GPS...)
Cristian

Arkon CM745
Yap...i just bought an arkon cm745 to use it with my Qtek9090 and it does the same, automatically starts activesync.
Sent the question to Arkon and i hpe i'll get an answer....
i'll keep you posted.

Re: Arkon CM745
igadget said:
Yap...i just bought an arkon cm745 to use it with my Qtek9090 and it does the same, automatically starts activesync.
Sent the question to Arkon and i hpe i'll get an answer....
i'll keep you posted.
Click to expand...
Click to collapse
Have you received answer by Arkon? I'm trying several way to disable autoconnect... thank you! If I will have success I will inform you...
Bye,

Hi Guys I am having the same issue... My phone reports failing to connect but yet Telstra still seems to charge me a connection fee of $0.24 every time it does it :-(
It's related to somthing with the sync cable from what I can see.. even if I plug that cable supplied into my computer it does not work with ActiveSync USB but tries to connect via GRPS ????? perhaps they have messed some cabaling up?
I have also tried blocking of the two data pins on the USB connector... this way it does not connect to GPRS from what I can see but I get an error straight away...
If any one has found a solution please let me know as well or post it up for all to see ;-)
Many thanks!
FB

fudgebottom said:
Hi Guys I am having the same issue... My phone reports failing to connect but yet Telstra still seems to charge me a connection fee of $0.24 every time it does it :-(
It's related to somthing with the sync cable from what I can see.. even if I plug that cable supplied into my computer it does not work with ActiveSync USB but tries to connect via GRPS ????? perhaps they have messed some cabaling up?
I have also tried blocking of the two data pins on the USB connector... this way it does not connect to GPRS from what I can see but I get an error straight away...
If any one has found a solution please let me know as well or post it up for all to see ;-)
Many thanks!
FB
Click to expand...
Click to collapse
I have flashed WM2005 (ROM 1.60c) and this issu was solved... no more auto-connection...
Bye

Hi Tesking
Thanks for the reply...
After dismantaling my phone connectors I have found out how to stop this from happning ;-)
It seems to be charging when pluged into the computer still (percentage is going up and charge LED is Orange )
If you look at your phone up right (just like your normaly would when using it)... the Sync/Charge connector at the bottom of the phone...
Starting from the left of that connector is Pin1 through to the right Pin22
The Arkon SyncCables seem to have Pins 5, 6, 8 and 10 connected (from what I can see, in this poor light I have at the moment) but does not really matter...
All I did was insert a pice of sticky tape over the Arkons cables over those pins and all done... easiest way to test it I found was to cut a very small pice of a Post IT Note and fold it over the connection....
Hope this fixes every ones issues if you are not running 2005
FB

Related

Haicom gps and tom tom help

Hi
Some help please, I have a xda 2, tom tom navigations software and a haicom 204e gps, i can not get the tom tom navigator to see the gps unit i have all the leads and the red led stays on i tried the gps on a laptop with a usb cable works fine, i don,t know which port to connect to ie com 1, 4, 5 etc and which things in the xda to turn on or off, as you can see i am a beginner to this, thanks for any help!!!!!
Onesongrg
Go to settings/connections/beams and uncheck the box, in tomtom choose com 1, nmea 4800.
Thanks mate worked a treat!!!!! :lol: :lol: :lol:
SameProblem?!
Hello!
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
I've an Haicom HI-202E GPS-Mouse,
the MDA II :wink:
a soldering iron...
and a 5V Powersupply in my adapter (consists of 2 USB ports connected to each other, powersupplied with an 7805 (2A))
How can i fix it?
Thanks!
Re: SameProblem?!
Nobody0815 said:
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
Click to expand...
Click to collapse
I'm not 100% sure, but i think, that wouldn't work.
The USB Specifications says that USB requires one master device to controll the slave devices. Your PC is the master device and the mda is just an slave. You won't be able to get 2 slaves talking to each other without a master.....
Stefan
cant the MDA work as an Master?
I've heard it so. But I'm not shure.
Some people gets a external HDD working on other PDA's.
I'll look and think about, but i've never found anithing an web for thet problem/solution. :roll:
I've wondered that nobody wants to connect more on the PDA...
I mean 20Gig HDD may be nice in Holliday to listen music :wink:
the tomtom software for PPC's will enable under "GPS-status - GPS" the options to select a protocol/GPS-Mouse and the connection:
Ir
BT on com6
serial on com1
com9
.
.
Serial on USB
Bluetooth GPS
so, i thought it will
Thanks for more...
Found this in another thread:
Julian Thompson said:
Yes, this is right. The XDA2 won't function as a USB host. You do need that backpack and a www.ratocsystems.com host card. Then it will work.
I know this becuase I'm trying to link mine up to a HDD to store loads of music in my car and use the PPC as a controller but I don't want the confounded backpack - for you though on the motorbike, only using it when you need it it sounds perfect.
Click to expand...
Click to collapse
and you can also take a look at this long thread:
http://forum.xda-developers.com/viewtopic.php?t=8799
Stefan
Hi
I have an xda 1 & am trying to get the gps to work. I have a Haicom hi204s gps receiver & a (ic-xda-ht for 02 xda tmoble ) cable for the car.
The software I am using is tom tom 3 ver 3.02
I have turned the beam off
My settings for the gps page are Haicom GPS + com1
I am at a loss !!
Rgds
Tan
@nobody: THE MDA can ony act as slave.
BUT: For GPS you ony need a serial port. And after all USB IS a serial type of port.
Only thing you need to do is solder a cable that connects the +5v, ground, Tx and Rx of the GPS USB connector to the appropiate pins of the MDA connector . . . .
On one of the german forums (cant remember the name :-( )there is a memeber nicked 'mocki' that offers custom built cables.
Tanman, choose nmea 4800 and com 1. Make sure beams are off and also that you dont have a keyboard driver loaded. Go to the gps screen in tomtom and see if there is any bars showing for satellites. If this doesnt work or gives an error let me know.
Hi cruisin-thru
Worked a treat
what I could not find at first was 'nmea 4800' which was the name of the sat receiver
Nice one thanx a lot
Tan
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
cruisin-thru said:
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
Click to expand...
Click to collapse
:?: :?:
So what you're saying is that, asl ong as the hardware is compatible with NMEA, we can use this generic driver with the correct baud spreed ?
Yes

POCKET BLUETOOTH TOOLS FOR IMATE-JAM

HAS ANYONE MANAGED TO SUCCESSFULLY INSTALL BTOOLS ON THE IMATE-JAM?
I HAVE TRIED ALL THE VERSIONS AND CANT GET THE SOFTWARE TO INSTALL.
It does not work with the JAM unfortunately. Perhaps this has to do with the newer JAM MS BT Stack 1.2.
I have emailed the developer to see if he intends on working on a Tool for the JAM, but thus far no response.
Has anyone tried this on the XDA mini?
http://www.ppcw.net/?itemid=2210
Knot said:
Has anyone tried this on the XDA mini?
http://www.ppcw.net/?itemid=2210
Click to expand...
Click to collapse
Knot,
No this will not work on the mini as it runs the MS Bluetooth stack and not the widcomm bluetooth stack.
I can make it work
I can successful install and run the said program.
It need to do, after pairing and before/after entering device name,
than press [Start]->[Today] to bring up the device profile select interface. As the MS BT will bring to front and cover that dialog.
yhlee,
This works, but all the options for my home computer are greyed out except headset profile?
Any ideas.
Mike
I can make it work with my Bluetooth GPS and Activesync with my desktop. Is those what you want?
It works but not to switch off From PDA
I could install the tool. Thanks to all in post with updated help.
This works well. But not to be able to switch off!! This stays on...If I tap on any of the bluetooth icon, it switches off for 2-3 seconds and gets ON itself again.
I can switch off only if other device is turned off.
Any known solution/problem?
AS
they work ok for me
Salve a tutti.
sono nuovo e sul mio qteq s100 e' presente il protocollo bluetooth della microsoft. E' possibile levarlo dalle balle e utilizzare quello widcom/broadcom ?? E come ? Grazie
by the way, what are the bluetooth tools good for? Neither do i get any new profiles after install nor does it improve anything (especially bt issue with rom 1.06 still there). So whats the reason to install that stuff?
regards,
Quappo

Micro USB TV Out

Hi.
¿ Do you think that something like that could work in our TG01 ?
Thank you.
http://www.techbuy.com.au/p/107810/MOBILE_PHONES_ACCESSORIES_-_DATA/Samsung/AATCX10.asp
emarc said:
Hi.
¿ Do you think that something like that could work in our TG01 ?
Thank you.
http://www.techbuy.com.au/p/107810/MOBILE_PHONES_ACCESSORIES_-_DATA/Samsung/AATCX10.asp
Click to expand...
Click to collapse
Forget it. No TV out on this device....
not out of the box but maybe someone could make an app to do it. i have one of these cables so will plug it in and see what results i get.
for now you could try http://www.mymobiler.com/ as you can atleast output to monitor. (it works i use it)
Edit my cable had a 2.5 jack on the end not micro usb was getting confused, but connected via the headphones to tv anyway and it carries sound to the tv, obviously the phone is treating it like headphones are connected. i dont understand why they didnt include tvout via usb.
HTC Touch can send TV signal via USB, ¿ maybe is possible to use his drivers in any WM phone ?.
http://www.mobilefun.co.uk/htc-ac-t110-p17769.htm
useyourfist said:
not out of the box but maybe someone could make an app to do it. i have one of these cables so will plug it in and see what results i get.
for now you could try http://www.mymobiler.com/ as you can atleast output to monitor. (it works i use it)
Edit my cable had a 2.5 jack on the end not micro usb was getting confused, but connected via the headphones to tv anyway and it carries sound to the tv, obviously the phone is treating it like headphones are connected. i dont understand why they didnt include tvout via usb.
Click to expand...
Click to collapse
good evening
you can search via google the nuetool web site. he provide a software to use your cable.
regards
Nuetools TVOut
http://www.nuerom.com/BlogEngine/page/nueTVOut.aspx
If anyone has a Micro-USB/TV-Out cable, ¿ can try it ?, and please, tell us if it works correctly.
This definitely won't work with the TG01 using the method specified on the other site. I've taken a screwdriver to my 'headphone adapter' and can confirm the socket on it is only 3-pole (Ground, Left, Right).
A 4-pole plug would just ground both poles of the furthest ring (usually connected to yellow) if you put it into the TG01 adapter. (for info, red is usually designated RIGHT, and is the very tip of the plug, white is LEFT and is the 'ring' in the middle)
If, however, the TV Out functionality is embedded in chipset, but disabled in software, then with a dedicated TV Out cable such as the one linked above, there is a chance that it would work. I must admit, I never thought I'd use it on my old Nokia N95, but I did - quite regularly.
So who's going to buy the cable and test it?
Pere said:
Forget it. No TV out on this device....
Click to expand...
Click to collapse
¿ Perquè no, Pere ?, sembla més un problema de software que de hardware, ja que hi ha cables per a treure TV per USB.
¿ Why not ?, it seems a software problem, not a hardware one. Because they are cables that can send TV signal via USB.
emarc said:
Nuetools TVOut
If anyone has a Micro-USB/TV-Out cable, ¿ can try it ?, and please, tell us if it works correctly.
Click to expand...
Click to collapse
Unfortunately not straight off. I have just tried with my TG01 and a Samsung UTC-200M.BSTG microUSB to Phono Video out cable. It is possible to get audio through the TV set (seems just on one channel so far), but I've not been able to get any video. The video on the TG01 gets scrambles whn connected up - still a recognisable picture in Core Player, but heavily distorted, horizontal streaks and sometimes a green border to the left side.
I have also tried connecting to the PC using Pocket Controller Pro and found that while it has no trouble with the 'normal' TG01 screen, it doesn't seem able to display the video window from Core Player.
Perhaps someone who has a greater knowledge of the inner workings of video display can shed some light ?
It may of course be as simple as the TG01 not having some vital hardware components.
I will try contacting the Nuetools developer and see if they have any ideas.....
Regards,
Kevin
Hi Kevin,
Not sure if it's the same thing but in Coreplayer i have noticed that if you have a setting selected this sometimes causes the banding and green border to the left - see if turning this off makes the image clear :-
Tools >> Preferences >> Select Page >> Advanced
Untick 'Less Rotation Tearing (slower)' and see if this clears it up
Look forward to hearing the results!
Cheers
Paul
Paul,
Thanks for the suggestion. It doesn't actually make any difference whether the 'Less Rotation Tearing' is checked or not in this case; however, I did have a look at the other Video settings and found that Video Output was set to Direct Draw. I've changed that to GDI and it seems more stable and no repeat of the green border / banding effect.
Unfortunately, however, despite cycling though all the video settings I can find, both in Core Player and NueCPL-TV Out I am still unable to get any video output to the TV via the uUSB cable. Both audio channels do work correctly via the white and red plugs.
I'm just about to try contacting the NueROM developer and see whather they can offer any further ideas...
emarc said:
¿ Perquè no, Pere ?, sembla més un problema de software que de hardware, ja que hi ha cables per a treure TV per USB.
¿ Why not ?, it seems a software problem, not a hardware one. Because they are cables that can send TV signal via USB.
Click to expand...
Click to collapse
Estic segur.....I bet that if Toshiba was able to provide this performance onTG01 (TV OUT..Wow!!!) , they would be very idiot if they didn't published it everywere....
maybe it works with a micro-sd-to-vga-adapter
see my last post at
forum.xda-developers.com/showthread.php?p=7141481#post7141481

has anyone tried the 'Plugable USB Type-C Gigabit Ethernet Adapter' on Galaxy S8/S8+?

Plugable USB Type-C Gigabit Ethernet Adapter - https://plugable.com/products/usbc-e1000
fuller details at https://plugable.com/2017/04/21/the-new-samsung-galaxy-s8-and-s8-with-plugable-usb-c-products
(I cannot find posts about Galaxy s8 - I assume they are similar?? )
If this post seems a bit stupid, when I asked netgear about using their device to transfer files by wifi, they said 'can the s8 connect by usb?? LOLOLOL :laugh:
Must other 'help sites' are still doing baby steps.... :/
I would normally use Airdroid (from google play) to transfer files(since my first S3 :luv: ) , but the network tech at work has decided the WiFi is disturbing his Draytek routing in the domain controller, so we have NO WIFI!!...
SO I was hoping this 'plugable' device may enable me to connect to 'airdroid' once more using RJ45 at work...
Hi,
I've tried to plugin a Dell USB-C ethernet adapter and it works like a charm.
Do you need it just for file transfer? Why not using Google Drive or any other doc sharing app?
In this way, you won't have to carry any adapters with you.
RossTeagan said:
Do you need it just for file transfer? Why not using Google Drive or any other doc sharing app?
In this way, you won't have to carry any adapters with you.
Click to expand...
Click to collapse
what you mean take a large compressed file(E G a 73.5MB mp4) that is IN YOUR PHONE, send it to google, then send it back to your PC?????
how long will that take??
Using airdroid on my home pc, it takes 15 seconds from the phone to PC - no internet needed, it just goes through the router wifi to the PC connection!
How slow is yours??
Also HD 1920x1080 (10 minute vid of party) taken with samsung (1.2GIG) took only 2 mins to transfer.. NOTE: NO WIFI at work, only place I will be using the device..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
comnut said:
what you mean take a large compressed file(E G a 73.5MB mp4) that is IN YOUR PHONE, send it to google, then send it back to your PC?????
how long will that take??
Using airdroid on my home pc, it takes 15 seconds from the phone to PC - no internet needed, it just goes through the router wifi to the PC connection!
How slow is yours??
Also HD 1920x1080 (10 minute vid of party) taken with samsung (1.2GIG) took only 2 mins to transfer.. NOTE: NO WIFI at work, only place I will be using the device..
Click to expand...
Click to collapse
I didn't say is the perfect way of doing things
But it's an work-around that works, especially when you have limits or restrictions imposed by network admins.
RossTeagan, have you actually tried? some actual figures of download times would help..
moulip said:
Hi,
I've tried to plugin a Dell USB-C ethernet adapter and it works like a charm.
Click to expand...
Click to collapse
Its down to you mate do you or a friend have a galaxy S8 who is willing to load airdroid, and see if the 'plugable' will work?
(you may have to switch off the android wifi, or use airplane mode)
and then transfer a LARGE file using that..
comnut said:
Its down to you mate do you or a friend have a galaxy S8 who is willing to load airdoid, and see if the 'plugable' will work?
(you may have to switch off the android wifi, or use airplane mode)
and then transfer a LARGE file using that..
Click to expand...
Click to collapse
Yes I can definitely do that. I'll keep you posted.
Envoyé de mon SM-G955F en utilisant Tapatalk
moulip said:
Yes I can definitely do that. I'll keep you posted.
Envoyé de mon SM-G955F en utilisant Tapatalk
Click to expand...
Click to collapse
Merci beaucoup pour votre aide ! )
comnut said:
Merci beaucoup pour votre aide ! )
Click to expand...
Click to collapse
Francophone ou français ?
Envoyé de mon SM-G955F en utilisant Tapatalk
Test done. With Airdroid I uploaded a 1 Go file in 15 secs approximately.
moulip said:
Test done. With Airdroid I uploaded a 1 Go file in 15 secs approximately.
Click to expand...
Click to collapse
un grand merci pour votre expérience !!!
Yeah I have good friend in france, (I am English/Scottish) but that was 10 to 15 years ago... getting old, family, etc, etc... my french is not as good as it was, but google helps... _
15 secs?? what router do you have ?? mine is by Virgin so only 100 or 200Mbits..
Work has virgin 300Mb, but will not be fully used until the cisco contract runs out in march..
No router. I've done the test using Airdroid locally. The point of that was to show the possible speed to get out of a "plugable" no ?
moulip said:
No router. I've done the test using Airdroid locally. The point of that was to show the possible speed to get out of a "plugable" no ?
Click to expand...
Click to collapse
So Um, android to android?? you have TWO plugables??? Geeks wanna know :silly::victory: :highfive:
comnut said:
So Um, android to android?? you have TWO plugables??? Geeks wanna know :silly::victory:
Click to expand...
Click to collapse
No. I was on my laptop on one side and the s8+ connected through Ethernet on the same lan on the other side.
I connected to airdroid locally from the laptop using the s8+ lan ip on port 8888.
I created a 1go file with dd (Linux user here) and uploaded it to the s8+.
That's it
Envoyé de mon SM-G955F en utilisant Tapatalk
You said LAN .. did you mean something like this?? https://www.oxhow.com/connect-two-windows-7-computers-on-lan-using-ethernet-cable/
my work office is more like this - just remove the wifi modem, until the network manager can make it NOT crash the network.. :/
- Just replace one of the PC's with a plugable, should work??? (and boss wont complain..)
comnut said:
You said LAN .. did you mean something like this?? https://www.oxhow.com/connect-two-windows-7-computers-on-lan-using-ethernet-cable/
my work office is more like this - just remove the wifi modem, until the network manager can make it NOT crash the network.. :/
- Just replace one of the PC's with a plugable, should work??? (and boss wont complain..)
Click to expand...
Click to collapse
Depending on the lan configuration (dhcp...) it will work. As soon as the s8 gets an ip address you're good to go.
Envoyé de mon SM-G955F en utilisant Tapatalk
Yes, you certainly can plug USB Type-C Ethernet adapters into the phone. I've done it myself with a Belkin Gigabit one.
Note the new icon in the status bar for Ethernet.
You can plug most basic USB devices in using the OTG adapter. Keyboard, mouse (which gives you an on screen pointer, webcam, USB flash drive, floppy drive etc....
the_scotsman said:
Yes, you certainly can plug USB Type-C Ethernet adapters into the phone. I've done it myself with a Belkin Gigabit one.
Note the new icon in the status bar for Ethernet.
You can plug most basic USB devices in using the OTG adapter. Keyboard, mouse (which gives you an on screen pointer, webcam, USB flash drive, floppy drive etc....
Click to expand...
Click to collapse
yeo, you can plug em in... BUT will they work, as in talk to a complex router setup ??? some apps will expect to see wifi, and will not work without it..
It is too easy to say 'it works' and forget what happens when the android battery runs out, and you forgot to read the OP fully.. :/

TF700T "dead" ?

Hello,
Sorry, i'm not english. So bad english.
Well, i have an asus tf700t and he have a big problem. ( a friend give me the asus, not mine )
- When i press on / off button, the asus start, and block to the asus logo, nothing more ( a message " the device is unlocked" on top )
- No problem, i press together on / off button and volume +
---> the asus reboot to the asus logo
- i press together on / off button and volume -
---> just a bzzt and nothing more, black screen
- i plugged the asus on a laptop with win 10
---> nothing
- i try adb-fastboot
---> nothing, not recognyzed
- i try hard reboot ( with the little hole )
---> nothing
Any idea, because, for me, i can't do anything more.
Thank you for the next idea for this asus tablet.
Well, first of all thanks for the clear description of the problem! I have seen many, many posts by native English speakers that were a lot less clear than yours! So you're doing just fine.
Unfortunately your tablet does not do well at all. It's dead actually. You cannot get into the bootloader, you cannot get into recovery > sorry, dead as a door nail. :crying:
If you can find a cheap motherboard you could try changing it, but that's for you to decide...
Well, oh thank you !
And damn ! That tablet his dead.
I search for a new motherboard ( 32 / 64 ), i find a used for approximately 50$ ans a new one for 80$. With the postal port it exceeds 100$.
Too expensive for an old tablet.
My friend give me an other one asus tablet ( tf300t ) but she have the screen very broken. And the prise exceeds 120$, too expensive, again...
But if i decide to repair one of these tablets, it's for reading european comics, japans manga and pdf magazines with perfect viewer and e-pubs with amazon kindle for tablet.
With the best rom disponible, and a good installation, is it possible to run fine with one of these tablets ?
Best question ever ! If what i want is not very possible or too slow, i think the tablets go to trash box for recycling.
Thanks.
TEST to reinstall a rom through the SD card.
You will find the procedure on the site xda OR GOOGLE
motherboard ON ALIEXPRESS
Good price
https://forum.xda-developers.com/showthread.php?t=1803343
Votre tablette n'est pas morte.
Comme le dis Taz, il faut installer une rom via la carte sd
Hello,
So, i try to revive this old tablet and :
I tried the procedure will proposed by Fredbzh ( Salut copain breton ! ), and i have a serious problem with the usb connection.
- tf700t is not detected by the laptop ( Lenovo T450, not very old ) and not detected by a Macbook Pro
- ok, i download usb drivers for the tf700t ( android_nvidia_driver_201506 ), not working and not detected
- Android SDK, the same, not detected
- for be sure, opened a terminal windows in administrator mode and write "adb start-server" ---> "adb" is not a valid command....
- for be sure , opened a terminal windows with "minimal_adb _fastboot_v1.4.3" and write "adb start-server" ---> it work ! I write "adb devices" ---> nothing to see...
- I'm trying to change the usb cable with the TF300T cable ---> same problem
ok, it seems to be difficult to communicate with that android tablet.
Any ideas ?
nemekas said:
Hello,
So, i try to revive this old tablet and :
I tried the procedure will proposed by Fredbzh ( Salut copain breton ! ), and i have a serious problem with the usb connection.
- tf700t is not detected by the laptop ( Lenovo T450, not very old ) and not detected by a Macbook Pro
- ok, i download usb drivers for the tf700t ( android_nvidia_driver_201506 ), not working and not detected
- Android SDK, the same, not detected
- for be sure, opened a terminal windows in administrator mode and write "adb start-server" ---> "adb" is not a valid command....
- for be sure , opened a terminal windows with "minimal_adb _fastboot_v1.4.3" and write "adb start-server" ---> it work ! I write "adb devices" ---> nothing to see...
- I'm trying to change the usb cable with the TF300T cable ---> same problem
ok, it seems to be difficult to communicate with that android tablet.
Any ideas ?
Click to expand...
Click to collapse
Yes, it would be difficult since you cannot boot to
Android
recovery or the
bootloader
You only have adb access if the tablet is in Android or a custom recovery.
And you only have fastboot if the tablet is booted into the bootloader.
You cannot get it to either state. That's why I'm saying: The slate is dead. Sorry. And the advice to flash stock from a SD card is unfortunately dead wrong.
You need a new or used (but healthy) motherboard mate. That's all there is to it....
nemekas said:
Hello,
So, i try to revive this old tablet and :
I tried the procedure will proposed by Fredbzh ( Salut copain breton ! ), and i have a serious problem with the usb connection.
- tf700t is not detected by the laptop ( Lenovo T450, not very old ) and not detected by a Macbook Pro
- ok, i download usb drivers for the tf700t ( android_nvidia_driver_201506 ), not working and not detected
- Android SDK, the same, not detected
- for be sure, opened a terminal windows in administrator mode and write "adb start-server" ---> "adb" is not a valid command....
- for be sure , opened a terminal windows with "minimal_adb _fastboot_v1.4.3" and write "adb start-server" ---> it work ! I write "adb devices" ---> nothing to see...
- I'm trying to change the usb cable with the TF300T cable ---> same problem
ok, it seems to be difficult to communicate with that android tablet.
Any ideas ?
Click to expand...
Click to collapse
Vive la Bretagne :laugh:
Sorry for my english
try this:
https://forum.xda-developers.com/showthread.php?t=1803343
See ETAPE n°14
OR
https://forum.xda-developers.com/showthread.php?t=1755576&page=15
Unfortunately, I can not find a valid link to download "ota asus"
I think that as long as we see the logo, I think the tablet is operational
if not:
40 euros + 0 euros for ship motherboard 64 GO
https://fr.aliexpress.com/af/mother...dp=1a73e61dfaf984233ca6b010f5eae4fc&af=240682
https://fr.aliexpress.com/wholesale...B_20180225133633&SearchText=motherboard+tf700
use apps android aliexpress for good price
i find: http://support.asus.com.cn/download.aspx?SLanguage=en&m=ASUS Transformer Pad Infinity TF700T&os=32
I hope it's good
Hello,
So, i have much more questions and affirmations.
For Fredbzh ( vive la Somme ! )
- Etape 14 --> Nope, don't work and it seems now very difficult to obtain the Asus logo.
- Alternative method ---> Nope, don't work.
For Berndblb
You only have adb access if the tablet is in Android or a custom recovery.
And you only have fastboot if the tablet is booted into the bootloader.
Click to expand...
Click to collapse
Yep, nothing works. I search for a motherboard.
I find a lot of them, but, some says "be careful with the part number of the motherboard".
I need to disassemble the entire tablet to find it ? Or, can i find it with the serial number on the tablet ( for the mine : C80KAS013452 )
Thanks a lot guys.
nemekas said:
Hello,
So, i have much more questions and affirmations.
For Fredbzh ( vive la Somme ! )
- Etape 14 --> Nope, don't work and it seems now very difficult to obtain the Asus logo.
- Alternative method ---> Nope, don't work.
For Berndblb
Yep, nothing works. I search for a motherboard.
I find a lot of them, but, some says "be careful with the part number of the motherboard".
I need to disassemble the entire tablet to find it ? Or, can i find it with the serial number on the tablet ( for the mine : C80KAS013452 )
Thanks a lot guys.
Click to expand...
Click to collapse
demontage obligatoire pour avoir le numero et le modèle
attention, il y a des verrous a debloquer avant
https://www.how-fixit.com/laptop-repair-guides/asus-tablet-and-phone/asus-transformer-pad-tf700t/
C est la partie la plus chiante ensuite c est du gateau
regarde aliexpress 40 E avec les frais de port, utilise l application android les prix ne sont pas identiques si tu utilises windows, c'est moins cher avec Android
Par contre Ali c'est pas express :RÉ il faut attendre quelques fois ca peut prendre 1 mois avant d'avoir la marchandise
Hello,
I recently receive the new motherboard, with 15 dollars for the customs...
Today, i disassemble the tf700t, install the new motherboard, and, a little problem :
- The new and the ancient motherboard have the same reference number
- the tf700t is full battery charge
- when i press the on / off button, i heard the buzzer, two times, and don't have anything on the screen ( outch ! )
- ok, i screw the motherboard, again, on / off, buzzer, and nothing on the screen ( outch again )
- ok, i disassemble the new motherboard, and re install the ancient ( with the screw ).
- on / off button, buzzer ( with a different sound, more metallic ? ? ), and nothing on the screen
- okay.....
- i inspect the connection with the screen, nothing is abnormal in apparence...
- testing without photo lens, camera lens and sound, no changes.
So what's happen ?
Maybe you shorted out the screen? Connect it via HDMI to a TV and see it it boots
power + Vol up what's happen ?
droid or not droid ?
I've noticed that in order to get into the fastboot menu/screen I have to hold the buttons for the entire time until the bootloader version pops up.
So;
1st press the VOL- (volume down) button and hold it down, then while continuing to hold VOL- press and hold the power button until you see the below screen.
If you do not get that screen, please post a picture of the screen to this thread.
NP
I was wrong in the combination of keys ... you are in the menu that I wanted. try "wipe" that clears the account. for this, it is necessary to use "vol-" or vol + '"
Your tablet is not dead. you have to reinstall Android.
Twrp?
Hello,
So after buying a hdmi cable, plugged on my tv :
- test with the ancient motherboard. No screen, just the buzzer.
- ok, install the new motherboard. No screen, buzzer and welcome asus !! ( happy )
For the screen, i see no scratches inside and outside, no impacts inside and outside.
For the connectors, the big one who looks like a big "S", is well.
The second connector, with two heads, have a big folding / crease.
Maybe it's the connector, maybe not....
nemekas said:
Hello,
So after buying a hdmi cable, plugged on my tv :
- test with the ancient motherboard. No screen, just the buzzer.
- ok, install the new motherboard. No screen, buzzer and welcome asus !! ( happy )
For the screen, i see no scratches inside and outside, no impacts inside and outside.
For the connectors, the big one who looks like a big "S", is well.
The second connector, with two heads, have a big folding / crease.
Maybe it's the connector, maybe not....
Click to expand...
Click to collapse
NE TOUCHE PLUS A RIEN, tu vas finir par casser quelque chose :RÉ
si tu as obtenu l'écran avec les trois icones, ça veut dire que c'est la rom qui a un problème.
Pour cela , il faut la réinstaller.
pour pouvoir la réinstaller, il va falloir installer TWRP
https://forum.xda-developers.com/showthread.php?t=1797692
Hello,
So, for no mistake:
- I plug the asus on my tv
--> When i press on / off button, i have the asus silver logo.
--> The language choice.
--> And no tactile response.
--> When i press on / off button with vol up, i have nothing on tv.
--> When i press on / off button with vol down, i have nothing on tv too.
--> I think, theses commands are not disponibles with the hdmi, outside the rom. I think...
- I have the tablet in my hands, not plugged on the tv
--> When i press on / off button, i have the buzzer, and nothing on the TFT screen.
--> I think also, no tactile response.
--> When i press on / off button with vol up / down, i have the buzzer, and nothing on TFT screen.
And now, the House m.d diagnosis :
--> When i disassemble the tablet, i forgot to disconnect the battery ( i discover that today )
--> Did is it possible to have the tactile response when the tablet is plugged on a tv ? With one of my old tablet, NO, very useful...
--> I see some folding on the orange ribbon who is connected to the digitalizer, this affect the tactile, not the TFT ?
--> I think, i reassemble the ribbons on the good sens. Internet pictures are always right, no ?
--> I have no TFT response, two solution for me :
- I blow out the TFT when i disassemble.
- The TFT ribbon have a problem. Which problem, i don't know...
Damn, it's a lupus ...
@nemekas, sounds like you screen is dead, when connected to a TV via the micro-HDMI you should have tactile response, do you have the keyboard dock? If your screen is dead you will need the keyboard to make any inputs into the tablet.
NP

Categories

Resources