Hi.
¿ Do you think that something like that could work in our TG01 ?
Thank you.
http://www.techbuy.com.au/p/107810/MOBILE_PHONES_ACCESSORIES_-_DATA/Samsung/AATCX10.asp
emarc said:
Hi.
¿ Do you think that something like that could work in our TG01 ?
Thank you.
http://www.techbuy.com.au/p/107810/MOBILE_PHONES_ACCESSORIES_-_DATA/Samsung/AATCX10.asp
Click to expand...
Click to collapse
Forget it. No TV out on this device....
not out of the box but maybe someone could make an app to do it. i have one of these cables so will plug it in and see what results i get.
for now you could try http://www.mymobiler.com/ as you can atleast output to monitor. (it works i use it)
Edit my cable had a 2.5 jack on the end not micro usb was getting confused, but connected via the headphones to tv anyway and it carries sound to the tv, obviously the phone is treating it like headphones are connected. i dont understand why they didnt include tvout via usb.
HTC Touch can send TV signal via USB, ¿ maybe is possible to use his drivers in any WM phone ?.
http://www.mobilefun.co.uk/htc-ac-t110-p17769.htm
useyourfist said:
not out of the box but maybe someone could make an app to do it. i have one of these cables so will plug it in and see what results i get.
for now you could try http://www.mymobiler.com/ as you can atleast output to monitor. (it works i use it)
Edit my cable had a 2.5 jack on the end not micro usb was getting confused, but connected via the headphones to tv anyway and it carries sound to the tv, obviously the phone is treating it like headphones are connected. i dont understand why they didnt include tvout via usb.
Click to expand...
Click to collapse
good evening
you can search via google the nuetool web site. he provide a software to use your cable.
regards
Nuetools TVOut
http://www.nuerom.com/BlogEngine/page/nueTVOut.aspx
If anyone has a Micro-USB/TV-Out cable, ¿ can try it ?, and please, tell us if it works correctly.
This definitely won't work with the TG01 using the method specified on the other site. I've taken a screwdriver to my 'headphone adapter' and can confirm the socket on it is only 3-pole (Ground, Left, Right).
A 4-pole plug would just ground both poles of the furthest ring (usually connected to yellow) if you put it into the TG01 adapter. (for info, red is usually designated RIGHT, and is the very tip of the plug, white is LEFT and is the 'ring' in the middle)
If, however, the TV Out functionality is embedded in chipset, but disabled in software, then with a dedicated TV Out cable such as the one linked above, there is a chance that it would work. I must admit, I never thought I'd use it on my old Nokia N95, but I did - quite regularly.
So who's going to buy the cable and test it?
Pere said:
Forget it. No TV out on this device....
Click to expand...
Click to collapse
¿ Perquè no, Pere ?, sembla més un problema de software que de hardware, ja que hi ha cables per a treure TV per USB.
¿ Why not ?, it seems a software problem, not a hardware one. Because they are cables that can send TV signal via USB.
emarc said:
Nuetools TVOut
If anyone has a Micro-USB/TV-Out cable, ¿ can try it ?, and please, tell us if it works correctly.
Click to expand...
Click to collapse
Unfortunately not straight off. I have just tried with my TG01 and a Samsung UTC-200M.BSTG microUSB to Phono Video out cable. It is possible to get audio through the TV set (seems just on one channel so far), but I've not been able to get any video. The video on the TG01 gets scrambles whn connected up - still a recognisable picture in Core Player, but heavily distorted, horizontal streaks and sometimes a green border to the left side.
I have also tried connecting to the PC using Pocket Controller Pro and found that while it has no trouble with the 'normal' TG01 screen, it doesn't seem able to display the video window from Core Player.
Perhaps someone who has a greater knowledge of the inner workings of video display can shed some light ?
It may of course be as simple as the TG01 not having some vital hardware components.
I will try contacting the Nuetools developer and see if they have any ideas.....
Regards,
Kevin
Hi Kevin,
Not sure if it's the same thing but in Coreplayer i have noticed that if you have a setting selected this sometimes causes the banding and green border to the left - see if turning this off makes the image clear :-
Tools >> Preferences >> Select Page >> Advanced
Untick 'Less Rotation Tearing (slower)' and see if this clears it up
Look forward to hearing the results!
Cheers
Paul
Paul,
Thanks for the suggestion. It doesn't actually make any difference whether the 'Less Rotation Tearing' is checked or not in this case; however, I did have a look at the other Video settings and found that Video Output was set to Direct Draw. I've changed that to GDI and it seems more stable and no repeat of the green border / banding effect.
Unfortunately, however, despite cycling though all the video settings I can find, both in Core Player and NueCPL-TV Out I am still unable to get any video output to the TV via the uUSB cable. Both audio channels do work correctly via the white and red plugs.
I'm just about to try contacting the NueROM developer and see whather they can offer any further ideas...
emarc said:
¿ Perquè no, Pere ?, sembla més un problema de software que de hardware, ja que hi ha cables per a treure TV per USB.
¿ Why not ?, it seems a software problem, not a hardware one. Because they are cables that can send TV signal via USB.
Click to expand...
Click to collapse
Estic segur.....I bet that if Toshiba was able to provide this performance onTG01 (TV OUT..Wow!!!) , they would be very idiot if they didn't published it everywere....
maybe it works with a micro-sd-to-vga-adapter
see my last post at
forum.xda-developers.com/showthread.php?p=7141481#post7141481
Related
For anybody that isn't familiar with it, the UG008 is an RK3066 device very similar to the UG007 but in a larger case and with the addition of an external wifi antenna, ethernet port, and an analog A/V port. I went with it primarily because the analog A/V port allows you to connect a set of speakers when using it with an HDMI to DVI adapter (for viewing on a computer monitor) without the need for a separate USB sound card. Anyhow, to get to the point of this post...
Is there any way to add custom resolutions? It has the option for 1080p and 720p but the monitor I'm using has a native resolution of 1680x1050 (16x10). and stretches any non-native resolution to fill the screen. It's not bad in video, but text isn't as crisp as it should be.
Also, I was wondering if there is any way to connect another Android device with a usb cable to transfer files? I tried connecting my Note 2 which automatically launched the gallery app on the UG008 and gave me the option to transfer pictures but no way that I could find to transfer anything else. I assume if I could put the phone into mass storage mode it would work fine but unfortunately they seem to have done away with it in favor of MTP and PTP.
Thanks,
Tony
tonyz2897 said:
For anybody that isn't familiar with it, the UG008 is an RK3066 device very similar to the UG007 but in a larger case and with the addition of an external wifi antenna, ethernet port, and an analog A/V port. I went with it primarily because the analog A/V port allows you to connect a set of speakers when using it with an HDMI to DVI adapter (for viewing on a computer monitor) without the need for a separate USB sound card. Anyhow, to get to the point of this post...
Is there any way to add custom resolutions? It has the option for 1080p and 720p but the monitor I'm using has a native resolution of 1680x1050 (16x10). and stretches any non-native resolution to fill the screen. It's not bad in video, but text isn't as crisp as it should be.
Also, I was wondering if there is any way to connect another Android device with a usb cable to transfer files? I tried connecting my Note 2 which automatically launched the gallery app on the UG008 and gave me the option to transfer pictures but no way that I could find to transfer anything else. I assume if I could put the phone into mass storage mode it would work fine but unfortunately they seem to have done away with it in favor of MTP and PTP.
Thanks,
Tony
Click to expand...
Click to collapse
Other than a custom rom I wouldn't know of any other way to handle the resolution issue. No idea on the other device either. My question is on the recovery. Did u get one installed on it?
ok so i just got mk808 android stick.
came home plugged it into my tv via hdmi - mini hdmi adaptor
plugged in the usb power to a 5v - 2amp charger from my nexus 7
the screen on my tv switched over to hdmi 1 blue screen,.......and thats all
i dont have a clue what ido to start it up or anything?
i got a mele air mouse 10 thrown in the deal too which is working on my tab but yeah how do i start up this thing? the blue light comes on and the tv switched to hdmi but thats all.
The MK808 has a blue light that has to be on when powered and blinking when streaming from the net. It shoud boot up by itself after you plug it in.
Check to see that your TV is set to the right HDMI input.
I have mine on HDMI 1. Make sure that yours matches your MK808 HDMI input.
Other than that, try another TV.....
premiatul said:
The MK808 has a blue light that has to be on when powered and blinking when streaming from the net. It shoud boot up by itself after you plug it in.
Check to see that your TV is set to the right HDMI input.
I have mine on HDMI 1. Make sure that yours matches your MK808 HDMI input.
Other than that, try another TV.....
Click to expand...
Click to collapse
thanks for your reply i managed to get it working today with a new usb cable now happily using but trying to find a way to switch it of from remote,. "air mouse f10"
If yours is rooted, install "Rom Toolbox" that it have a widget called "Reboot".
Clicking that will give you all the settings ....
To reboot: instead of the full ROM Toolbox, which BTW is a great app, try Reboot Menu (https://play.google.com/store/apps/...wxLDIxMiwib3JnLnJpY2VrbmlnaHQuZ3MycmVib290Il0). That's all it does, it gives you reboot options (you must be rooted).
got the power menu app cheers
anyone had any experience getting another tablet to work as touchpad?
Try MK 802 lll remote app. Works on a lot of these.
ColinB63 said:
Try MK 802 lll remote app. Works on a lot of these.
Click to expand...
Click to collapse
ive tried droidmote and now this app but i can never find-connect to my mk808? both on same network
edit: got it to connect to the device but i have a bluescreen on phone and tab touching does nothing and the few option i do have seem to do nothing also
kozmo2k4 said:
To reboot: instead of the full ROM Toolbox, which BTW is a great app, try Reboot Menu (https://play.google.com/store/apps/...wxLDIxMiwib3JnLnJpY2VrbmlnaHQuZ3MycmVib290Il0). That's all it does, it gives you reboot options (you must be rooted).
Click to expand...
Click to collapse
I have mine hooked to a wall outlet in my living room that has a light switch to control it... MUCH easier! :laugh:
Robbzilla said:
I have mine hooked to a wall outlet in my living room that has a light switch to control it... MUCH easier! :laugh:
Click to expand...
Click to collapse
You don't want to just just "pull the plug" (or flip the switch) on the unit, it could cause filesystem corruption....
Sent from my SPH-D710 using Tapatalk 2
I have been using quickboot for years.
so theres probably no way to switch on via remote eh?
on a good note i did plug my VERY OLD phillips toucam pro from like 1999 lol and the microphone works!!!
video doesnt camera apps force close but skype works with microphone:good:
also any sixaxis help? seems without droidmote which i cannot get working its a dead end
Hi, I hope this is the correct sub forum for talking about Android TV boxes, if it's not please accept my apologies and tell me the correct one.
I have just received this Android TV Box, Cs918 MK888 Q7. I bought it from here: Aliexpress
I have tested it and it's working without any problem with the AV wires, but the quality of the image is not so good. And the problem is when plugged with the HDMI cable, the image in the TV is always appearing and disappearing, you can check this video: Video Mediafire
That's very annoying, since the AV quality is not so good, and I have already tried another HDMI cable and another TV, unsuccesfully. I kwow it's probably a hardware issue but is there any chance that it's software? Or did anybody have a similar experience and can make any suggestion about the hardware?
Thank you so much, I was so happy when I realized xda has a subforum for Android TVs and sticks, I'm sure I can get some answers here or if I buy a replacement find the best ROMs and support.
Thanks again!
I bought the same thing. Take the following steps and it will be working!
1.open batch tool application (see link below)
2.find firmware and add to FW path
3.plug cs918 and needn't power it on
4.press recovery button and don't loose it.
5.find a otg cable connect computer and cs918
6.you can loose recovery button when the batch tool connected divices 1 turn green.
7.click upgrade and waiting for the finsh,device will upgrade automatically.
batch tool: https://mega.nz/#!6pck0QJI!iBkWmoM3oTBMXevrB3kwrEWOXJ20_TQarcbK9IROrR4
firmware: https://mega.nz/#!Pl0k3AxK!mXIQ70wLy4_iGwESOUN1gnxKkyo9CyAn5hWy5dYo7Qk
instruction video: https://mega.nz/#!r5M2zK6R!8FzrVI1W8fZ883Iq6miZ826s_m4o0Bj0QjikUgaQ5Ao
This video will help you
https://www.youtube.com/watch?v=tagnwVG3WSE
Connecting your box can be tricky. Took mee about 30 minutes.
Good luck
Truth is I got rid of this box, but thank you anyway! I'm sure this will be useful for other users with the same problem.
Thank you!
Hello everyone!
I hope there isn't a topic already for this, but I searched and didn't find anything, mostly also because it's kind of difficult to describe my problem.
To begin with. I have one of those chinese car stereos that run WinCE 6 in my car. It's not the first one, I actually went through quite few of them to finally find one that suits me. I thought I did, and mostly it's true, but there is still one feature that bugs me a bit.
My stereo has two USB ports. One, mini-USB on front - for music/videos/pics, second, full size USB on the back - for 3G/WiFi adaptor. This is as described by the manufacturer/seller.
Now, obviously, many of us would think, that since it's "universal serial bus", it shouldn't matter what I put in which port. So the rear port should accept music on USB flash drive and front port should work with 3G modem. Right? Right? Wrooong!!!
For whatever reason, my stereo only accepts music in the front port, with annoying little cable that is to convert the mini-USB to full size, just bumping up and down as I drive. Also, since I have a built-in USB port, which I would like to use for this and plug it's connection to rear port on the stereo, bugs me a lot.
But no, the rear port only works with the 3G modem and seems to completely ignore any flash drive connected to it.
What's funny though is, that the front port actually works with the 3G modem too! So the front is a "2in1", but the rear is only designated for 3G/WiFi.
Since I don't want to let this just go and get used to it (+ my OCD is fighting heavilly with me on this, lol ), I started to look around to figure out what might cause this. I loaded Total Commander on the unit and plugged two flash drives to the stereo. Both with music files, both formatted the same. In totalcmd it showed them as USB (front) and USB1 (rear) (or something similar, the key part is the "1"). It always added the "1" to the rear one, even though it was connected alone, without the front one.
Now, this is where I believe the problem is. I think/hope/wish that the music application on the stereo only works when pointed to the "USB" (front) device. Since there is probably no way to decrypt and re-program the music app, I was thinking about renaming the USB connections, or, basically switching them for each other.
So to get (finally) to the bottom of my question, is there a way to switch the description/name/purpose of the USB ports in WinCE 6.0 platform, preferably of course in a way that it would stay like that even after restart?
Many many thanks for any help or pointing me to the right direction! Also please let me know if there is some detail that might help identifying the problem.
Today I installed an app called USB Device Info from the play store. What it shows is that it cannot connect because of SeLinux.. CLUE?? So I went ahead and looked on how to connect via USB with Linux. I downloaded Terminus from Play Store and was able to read the files. Previously, I read it's a 'read only' connection. I'm researching how to change the 'read only' to 'read and write', and also extract and find these files. I'm currently looking for my "extracted files".
I recently purchased a micro-hdmi to VGA adapter in the hopes I could connect my tf700 to my external monitor. The forum won't allow me to link to the adapter I ordered but it was through Amazon. The brand is Cable Maters.
I connected it, but nothing is displaying on the monitor. No F8 on the keyboard. Is there something I need to set on the tablet? Sorry, not very technical.
Well, you need to set your TV to the correct input port. Check your TV user guide. With my Panasonic there's a "Source" button on the remote which allows you to select the source of your signal, don't know what that would be for your TV
berndblb said:
Well, you need to set your TV to the correct input port.
Click to expand...
Click to collapse
I am talking about connecting to a larger computer monitor that uses vga...
leigh80 said:
I am talking about connecting to a larger computer monitor that uses vga...
Click to expand...
Click to collapse
can you say the model of your monitor?
(the monitor must support FullHD resolution of 1920×1080 or be able to scale it.
some adapters issue a fullHD image, regardless of the input resolution)
try to connect to another monitor or from another tablet
The first adapter that I bought on the Internet did not work.