OK - so ive downloaded intellisync and installed it but for some reason it doesnt want to comunicate with my PC or XDA - any ideas
Was it not meant to run on a XDA I or am i just dumb?
The reason why i switched is because of MS AS inability to actually copy all of my inboxes, absolutly pathetic IMHO
is IS any better?
It would get half way through and then disconnect itself, then i ahve to power on and off again (my XDA) and it would get hung on the same spot - or email i guess, where do you find the settings for IS? adn what wizard should i be using?
I switched to IntelliSync as well because I could not get ActiveSync to connect as anything but guest. No problems with connecting to my XDA (make sure that the IntelliSync PocketPC portion is insatlled), works great from home and work. I did have problems using with my PC mainly because IntelliSync does not work with the new outlook versions (I think 2000 or 2002 is the newest it works with).
Related
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Guru Meditation said:
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Click to expand...
Click to collapse
Hi, which version of WM6 did you use? Also, have you got MDS working yet?
Hi,
I tried bb connect 4 on WM6, Laurentius WM6 Pro Business Release V7
it didn't work...
somebody knows how to run BB connect??
thx
blackberry connect WM5
Wondering anyone got luck getting bb connect to work on HP IPAQ hw6955?
I have tried few bb connect version but none of them worked it is stuk in Pin Pending. Anyone knows of a fix or knows if HP been test please let me know.
Thanks in advance
BB Connect - Desktop won't connect to device
I was trying to get my Universal to connect to the Blackberry Connect Desktop for Window Mobile Devices. I followed the install guide and from what I can tell it seems like active sync is still blocking the device from talking to the blackberry software. When I disable the USB connect option in activesync the device cannot be seen from the laptop at all.
I am using BB desktop software is 4.0.0.17 and BB connect software on device is 4.0.0.67. Active sync is 4.5
My understanding is you has to activate using the desktop method and it can not be done wirelessly. I did try wirelessly and I get Service: "not connected".
Any help or ideas are appreciated.
Blackberry Desktop Manager USB Driver
Wrong forum, sorry
on some devices you have to go into the registry and change the AKU to 0.4.2 can someone verify I am scheduled to pick up a Universal this week and need bbconnect capability
Ok I am no newbie to this, but I am sick of the frustration that comes with this problem. I've had me TC for a couple months now and it will not be recognized with my PC. I've had this problem before.... deleting the partnership, changing the USB ports and settings, downloading the newest sync software, and shutting down the fire wall, yet nothing works. The only thing I can do is use Bluetooth, which is to slow to transfer files. I need some help here, because even backing up everything on the phone and doing a hard reset takes too long to restore what I have on it now.
try to unmark ->settings->connections->usbtoPC-> enhanced network functions.
sorry, i have a german one, so look for that function.
I have the same problem with my o2 xda orbit 2.
I found that if I turned off the bluetooth and wifi it connected ok but even that seems to have stopped working now.
I got it back
I shut off the windows firewall with Vista and it works every time now. This is odd since I always had it on before and never made a change to the settings. In fact once I had given permission for windows mobile center to run with the security I never had this problem before. All I can say is it is a serious pain to disable it every time I want to access my files on the phone.
the joys of activesync......
I'm running XP-Pro on both my home and desktop PC's
with my orbit 2 I have no problem connecting at home, but failed miserably at work (other than the first time after I'd installed activesync).
I'd concluded that it was my firewall settings (which are outside of my authority to alter) we're the cause of the problem and gave up.
What usually happens is an activesync connection is established (I alway click on cancel in the first box - because I don't want to sync files etc, just to be able to explore and install software), and then when I click on explore (after it says connected) it just hangs for a minutes or so, before disconnecting.
However, I hooked up my Orbit2 to my laptop in my hotel last night (to charge) and I noticed that I could explore. OK I thought, it was the firewall.
But then today I tried exactly the same thing, and we're back to the non communicating version.
Any ideas,
Any ways to force activesync into submission - even if just at the explore level?
Thanks
simple joys
Well Vista doesn't use active sync, but I'll try to give you what I have learned. First it always helps to have the latest version of the software. I'd delete active sync from the computer and end the partnership on the phone. The phone then says to hook it up with a computer to establish a connection. Before you do restart both. Download newest version from windowsmobile, install and restart again. Disable firewall and any antivirus ( it makes a difference ) and try to establish the new partnership. If that doesn't work sometimes the comm ports are wrong and you have to find out which your phone uses. Once I had a Moto Q9h unbranded that would not sync with USB no matter what I did from the start, but it would work with a bluetooth sync. That was the worst speed ever. Anyway Good Luck.
Thanks,
yes I am using the latest (for XP) active sync.
I also uninstalled it / re-installed it
I also deleted the profile
All to no avail
Virus / Firewall settings are locked on this laptop.
Same problem
I'm using vista, uninstalled and reinstalled the last version of ActiveSync, deleted the partnership and the phone does not not connect to the pc. I dunno what to do .
p.s. : firewall is off.
no sync with xp and vista
hi
I see that Im not alone...Isync my polaris with my personal pc (vista 32) and with my professional pc (xp pro).
my rom is Aserg (many rom tested before like Bepe....same PB)
its impossible to sync both pc. I have to erase partner ship each time I want to sync.
Im not sure, but I think that windows 61 is responsible. Is that possible ? thank you for helping me !
nooms
Aserg 3
radio 168...
swatguard said:
I'm using vista, uninstalled and reinstalled the last version of ActiveSync, deleted the partnership and the phone does not not connect to the pc. I dunno what to do .
p.s. : firewall is off.
Click to expand...
Click to collapse
You said you updated active sync, but Vista doesn't use that program. You need to use Windows mobile device center. If you go to windowsmobile.com there is an update you can download that you install with the phone connected. That might work.
nooms said:
hi
I see that Im not alone...Isync my polaris with my personal pc (vista 32) and with my professional pc (xp pro).
my rom is Aserg (many rom tested before like Bepe....same PB)
its impossible to sync both pc. I have to erase partner ship each time I want to sync.
Im not sure, but I think that windows 61 is responsible. Is that possible ? thank you for helping me !
nooms
Aserg 3
radio 168...
Click to expand...
Click to collapse
You have to delete every time, because once it is synced with one computer it establishes a relationship with that pc or laptop. The two operating systems use two different programs, but really the computers should have the partnership saved. I'm not sure if the phone can have two as well though.
Hi all
i have a problem.
its not related to only one pc but all windows xp machines ive used ( im not going down vista route at all).
nearly everytime i connect my phone/ppc to windows, it crashes, ie, i get the windows 32 process host or something has an error then the RAPC window with 1 minute countdown comes on and my computer crashes or restarts.
then if i connect my ppc, its fine.
its not only with 1 pocket pc, its with the 2-3 ive tried.
they all run windows mobile 6 or 6.1...
anybody have the same problem and know what to do? activesync 4.5, u can see the icon connecting and it has made the noise its found the pocket pc, then bam...
i couldnt find this topic anywhere in xda, dont know where else to look
Cheers
It is not the PPC's at all - rather incompatible hardware on your desktop, such as an installed dial-up modem or other network device.
I had similar difficulties back in time on a Dell desktop until I removed a special DS Sound Card. A friend of mine had similar problems until he removed - following my recommendation - his dial-up modem card.
You will have to figure out what device on your desktop causes this incompatibility - please: before plugging out anything, remove the installed drivers first!
oh man. they are both laptops. thats going to be tough to remove something/uninstall drivers - doable but its going to annoy me everytime i log in
Hmmm,
try running your pc in save mode and run only what is needed for ActiveSync to work - not a nice solution but at least you can determine if this is an incompatibility issue or not.
hello my htc touch pro does not connect with activesync but the phone works perfectly
usb?
bluetooth?
tried other usb ports if usb ?
tried another computer?
yes i have tryed all tha no differance it will not work with active synce i tryed a hard restaand all what i could think of
1. check the manual
2. get newest activesync from microsoft
3. check settings (connection - usb to pc)
4. keep in mind, that it does not work with vista (at least it's not that easy)
5. if all that does not help, google or post again... we should find a solution
Also, do you synch another phone on this same computer? XP/winmo hasn't previously allowed synching two mobile devices. However i see they are offering a mobile "suite" that will help with this. (at winmo site).
When i first got my fuze i went thru this very same thing. Because my kaiser was already being used on the same computer.
yeah my kasier syncs fine
You should backup your data and upgrade your ROM. Which one are you using now? My experiences says it may solve a lot of troubles...
had this same problem a while back. make sure you don't have activesync on your computer looking for the old partnership and try going to settings>connections(tab)>USB to PC and unchecking "enable advanced network functionality" or if that is unchecked, try re-checking it.
Hi all,
I have searched and searched the forum and the internet but can find no answer to this issue.
I'm using an HTC Touch Dual (Neon 200) that I had set up to connect to my PC via bluetooth for Activesync.
No problems there, it all worked fine. The issue comes with my attempts to automate the synchronization. I had found and successfully used a program called CT Scheduler to start the bluetooth radio and then instigate the "Windows/repllog.exe" file to start a bluetooth activesync.
In Activesync, on the Touch, I go to "Menu-->Connections--->when cradled, synchronize all pc's using.........."
I had the option to select "`USB" or "`DIRECTORSOFFICE" (the name of my PC).
Now, I have no idea how the "`DIRECTORSOFFICE" option got there but I selected it and it all worked fine. I could connect via USB or Bluetooth and the auto-sync worked fine.
BUT, Here's the kicker, after a hard reset, I've restablished all my connections via bluetooth etc. and can manually initiate a sync via bluetooth. HOWEVER in the Activesync connections I can no longer select aything other than "`USB". For the life of me I cannot remember how I got the Touch to give me that other option and it is the ONLY thing preventing the auto bluetooth sync from working.
Any insight would be much appreciated.
Hi and welcome to XDA,
did you do a H-Reset or a new rom flash? the new rom may not support BT Activesync, you should also pair your phone to your PC, that may enable the option
Eh - my bad...should have specified in my OP. This is running stock WinMo 6.1 Professional.
Did you pair to your PC?
Not this time around.....dammit you know that sounds like it might be it! I'll have to a backup, hard reset and try it out.
If that's truly the case and I can get that option available again then I have a really tidy solution for people wanting to Autosync via Bluetooth.
(Although this is probably not an issue nowadays as most phones are coming with WiFi, so I guess people are syncing that way)
Badwolve1 said:
Did you pair to your PC?
Click to expand...
Click to collapse
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
woodbane said:
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
Click to expand...
Click to collapse
Depends what stack you have
Sorry, i don't think i can help
If i find anything, i'll let you know
Default MS BT stack for WinMo Pro 6.1. I haven't changed anything on this ROM at all.
I must have done something during BT setup that allowed that option to appear but I'll be damned if I can remember what it was!
It's not a huge deal as I luckily had a backup with that configuration working, I was just being a bit anal about doing a complete clean install, there were a few programs I wanted to get rid of and felt my phone had slowed up a bit.
Cheers.