Related
I have the HT820s, but they are not working so great at the moment.
They have worked exactly twice so far, and the settings and ROM were different both times yet the same settings also don`t work most of the time.
I was wondering if you also owned these headphones, if you could list your ROM and config settings.
There seems to be no ryhme or reason to wether or not they work, i have looked on all the threads for all the different ROMs and and there dosen`t seem to be any pattern at all to it.
mine are as follows
Bitpool = 58
Maxbitpool = 128
These are the settings i had when i had some small success, and no success at all......
A2DP and the Dreaded Moto
davieshyland said:
I have the HT820s, but they are not working so great at the moment.
They have worked exactly twice so far, and the settings and ROM were different both times yet the same settings also don`t work most of the time.
I was wondering if you also owned these headphones, if you could list your ROM and config settings.
There seems to be no ryhme or reason to wether or not they work, i have looked on all the threads for all the different ROMs and and there dosen`t seem to be any pattern at all to it.
mine are as follows
Bitpool = 58
Maxbitpool = 128
These are the settings i had when i had some small success, and no success at all......
Click to expand...
Click to collapse
Hi m8,
I have the same Moto HT 820 and to say they're temperamental would be an understatement......... there are quite a few of us here with the same headset and once you get them working they're great!
I've been using them all day today at the office without a single skip, pause or lockup. Reconnecting to the Uni works fine too.
No more issues with my Moto!
Unfortunately for you I'm using my latest build, due for release on the 1st Novemeber!
The problem is not the reg settings it's the stack on the Uni itself.
Only two more weeks and the Rom will be out.
Cheers,
Beasty
aaaaaaaaaaaaaaaaaaahhhhhhhhhhhhhhhhhh
(picture if you will, a man sitting in front of his computer pulling his own hair out by the handful)
davieshyland said:
aaaaaaaaaaaaaaaaaaahhhhhhhhhhhhhhhhhh
(picture if you will, a man sitting in front of his computer pulling his own hair out by the handful)
Click to expand...
Click to collapse
No need to picture it, I was doing it myself for a whole week!
(although for the humour facrtor and some comic relief you could upload a few pics for us all)
Not long to go though.................
Could you tell me the firmware revision of your headset.........it's inside the headband.......... mine is SYN0948D.
Cheers,
Beasty
I have the same headset, they work a treat.
After pairing the headset it started working perfectly.
beast0898 said:
No need to picture it, I was doing it myself for a whole week!
(although for the humour factor and some comic relief you could upload a few pics for us all)
Not long to go though.................
Could you tell me the firmware revision of your headset.........it's inside the headband.......... mine is SYN0948D.
Cheers,
Beasty
Click to expand...
Click to collapse
Hi Beasty,
I was ready to put some pics of my bald head, but was advised to wait until at least some grows back!
One of the HT820 I own is : SYN0948A.
The second HT820 is all smudged up and your guess is as good as mine.
As I have mentioned to you earlier, since they are not genuine therefore I cannot flash the ROM for the upgrade!
Thanks,
KOR!
SYN0948E for me, i looked thru the threads and i don`t think mine can be updated......
davieshyland said:
SYN0948E for me, i looked thru the threads and i don`t think mine can be updated......
Click to expand...
Click to collapse
Hi,
If I recall the procedure correctly from memory, you should power off the headphones, connect to your pc with the USB cable, hold down both track control buttons, and power the device on.
If the bluetooth leds stay on I believe that means the device is in flash mode......... I also believe that what I read on the forums, is that the "hookie" headsets do not support this mode at all.
Davieshyland, where did you purchase your headset from?
Cheers,
Beasty
Powered off, connected usb and then pressed both track buttons....... both LEDs started to flash at 1 second intervals. Which i believe is the correct way. I already looked into flashing/updating the firmware for the headphones, tought maybe this could solve my problems, but i think its only the A,B and Cs that can be updated.
I got them from ebay, but not a seller in Hongkong, it was some bloke in Manchester, England
Switched to JWrights 20202, someone said that was the best ROM for BT sound....
Had the same problem..... no sound after 1 second.
But..... while reading thru the 500+ posts i came across a two line post saying, in affect, 1st, pair your headphones, then turn your headphones off, then back on, wait for uni to find them automatically, and you should now have no problems.
This actually worked for me with this ROM, i am going to upgrade to his latest ROM tonight. Its now nearly 5 in the morning (AM ) i`m only up because of a Diabetic low (time for a cookie and a quick post) and now i`m going back to bed.
Bit of a noob question for my first post - sorry
Bought myself an SPV M5000 (remember them??) running WM6... didn't realise how big this thing was till it turned up
Anyway - the issue - in standby alone I seem to be getting about a days worth of battery out of it before it dies. This is not acceptable.
Running radio version 1.18.00 (Dunno if the rest is important, but ROM 2.07.00 WWE, Protocol 42.54.P8)
Now I've found some archived threads about rolling the radio version back to help solve this - was 1.18.00 one of the problem versions (should have fixed it by now surely??) and if so, how far back should I be looking?
Anything I could/should try before this? and...being really lazy now...could anyone post/show me to an idiot's guide for doing this
Thanks (and I promise to contribute more on future posts...if I don't just bin this paperweight first)
- now subscribed to this thread -
TllEWL said:
Bit of a noob question for my first post - sorry
Bought myself an SPV M5000 (remember them??) running WM6... didn't realise how big this thing was till it turned up
Anyway - the issue - in standby alone I seem to be getting about a days worth of battery out of it before it dies. This is not acceptable.
Running radio version 1.18.00 (Dunno if the rest is important, but ROM 2.07.00 WWE, Protocol 42.54.P8)
Now I've found some archived threads about rolling the radio version back to help solve this - was 1.18.00 one of the problem versions (should have fixed it by now surely??) and if so, how far back should I be looking?
Anything I could/should try before this? and...being really lazy now...could anyone post/show me to an idiot's guide for doing this
Thanks (and I promise to contribute more on future posts...if I don't just bin this paperweight first)
Click to expand...
Click to collapse
Welcome to the forum
I would recommend you to enter to Universal forum and read this: http://forum.xda-developers.com/showthread.php?t=267448
I have heard that some radios drain the battery fastet than others, I´m using 1.08 and my original battery from 2005 last me day and a half using a lot of calls and some BT and WIFI
Good luck and don´t forget to vote!
OMG! Soo much information
Thanks for the steer to the Universal section (may have found that eventually, but god knows how long it would have taken)
3hrs later, I think I've established that although I don't have the randomly dying battery (still going at .... 21%) Radio 1.18 works for others, so I probably do need a new battery - the phone's still got its protective screen covers on it, but that's not to say that the battery was new.
I'll switch back to my Treo (7days+ with use) for now and just use the brick for the SatNav till I get a new battery.
Don't think I'm gonna be able to spare the time to read up on how to do all this flashing stuff safely so hope the new battery works
TllEWL said:
OMG! Soo much information
Thanks for the steer to the Universal section (may have found that eventually, but god knows how long it would have taken)
3hrs later, I think I've established that although I don't have the randomly dying battery (still going at .... 21%) Radio 1.18 works for others, so I probably do need a new battery - the phone's still got its protective screen covers on it, but that's not to say that the battery was new.
I'll switch back to my Treo (7days+ with use) for now and just use the brick for the SatNav till I get a new battery.
Don't think I'm gonna be able to spare the time to read up on how to do all this flashing stuff safely so hope the new battery works
Click to expand...
Click to collapse
Yes a new battery is the best solution, try to get the original!
On Universal forum there is a member called Dukenukem that sells the original ones at good price
You actually don´t have to spend so much hours reading and it´s worth!
Cheers and don,t forget to vote!
TllEWL said:
Bit of a noob question for my first post - sorry
Bought myself an SPV M5000 (remember them??) running WM6... didn't realise how big this thing was till it turned up
Anyway - the issue - in standby alone I seem to be getting about a days worth of battery out of it before it dies. This is not acceptable.
Running radio version 1.18.00 (Dunno if the rest is important, but ROM 2.07.00 WWE, Protocol 42.54.P8)
Now I've found some archived threads about rolling the radio version back to help solve this - was 1.18.00 one of the problem versions (should have fixed it by now surely??) and if so, how far back should I be looking?
Anything I could/should try before this? and...being really lazy now...could anyone post/show me to an idiot's guide for doing this
Thanks (and I promise to contribute more on future posts...if I don't just bin this paperweight first)
Click to expand...
Click to collapse
First: Yes Exec is a brick and Since I have it, I have given up to carry my 45 Magnum. HTC Universal (Exec) can do the same job
Be Frank IMHO Exec had never good battery live.. I hear some people saying they can last 1-3 days with it, but in my case: Push mail 80-100 mails, calls, a lot reminders and PIM use it has never lasted full one day.
My suggestion to stretch your battery live:
1) Low Phone Signal increase the power connection:
2) Radio Version depends on your service provider or Country.. In some countrys or locations the 118 has no problem but in others it leads to high power consumption or even device freezes. The best thing you can do is try different version and observe your phone Signal; call Quality and Battery live. Here you can find most Radio versions to download: http://vidmes.com/xda/Uni/Radios/
3) Changing frequent location (Driving) also decrease Battery live.
4) Set your Phone Band Manually to GSM or 3G dont use the setting "Auto"
5) Set your backlight settings to min brightness. ( in my case only to first line!!! Lower then that is Darkness)
6) Set Your Beam off to Incoming Beams
8) Backlight Time.. Set to min time ( in my case is 1min after that bcklight goes off)
9)Turn off device if not used... (In my case time: 1 min)
10) Find the Right ROM.. According my experiences some ROMs have high CPU usage.. even though nothing is active but CPU is running high. In most cases Shell32.exe leading to high CPU. ( My current ROM is Tomal 8.5 standard. very happy with it: http://forum.xda-developers.com/showthread.php?t=454906 )
11) If you don’t use push mail or don’t Sync. Kill the process repllog.exe. Again in Some ROM the Activesync. runs even though there is nothing to sync. (Push mail or Desktop Sync.) That leads additional CPU usage and also unnecessarily memory consumption.
At the end you will find out that you might need one more spare battery or one with higher capacity as it has been discussed here http://forum.xda-developers.com/showthread.php?t=432099.
Furthermore if you plan to carry the exec on your belt you may also need one of these:http://www.suspenderstore.com/susu60.html
Bulldog said:
Furthermore if you plan to carry the exec on your belt you may also need one of these:http://www.suspenderstore.com/susu60.html
Click to expand...
Click to collapse
Oh boy, that link does not carry well across the water, it conjures up totally different images here in the UK.
deedee said:
Oh boy, that link does not carry well across the water, it conjures up totally different images here in the UK.
Click to expand...
Click to collapse
It was not my attention to indicate to the guys with less hair.. it should be protection for not losing his pants.
Bulldog said:
It was not my attention to indicate to the guys with less hair.. it should be protection for not losing his pants.
Click to expand...
Click to collapse
Has to be said that comparison isn't a huge amount better, , UK pants are under garments, the outer ones are trousers.
And i am missing the guys with less hair connection, suspenders in the UK are a female lingerie item.
deedee said:
Has to be said that comparison isn't a huge amount better, , UK pants are under garments, the outer ones are trousers.
And i am missing the guys with less hair connection, suspenders in the UK are a female lingerie item.
Click to expand...
Click to collapse
Thanks for the “Pants” correction in British English.
According the Dictionary it seems in American English meaning of Pants can be also trousers. But hey how I would know..English is just my 4th language.
However Somehow I start to miss your connection to female lingerie items. Frankly speaking it appears to me that you did not see the suspender pictures in the link that I have given or else you would have seen those are the one of two straps worn over the shoulders to hold up trousers (pants). I believe to have seen that such suspender are also worn by Skinheads which some call them “the guys with less hair”
In Order to make it short, I suggest after you seen the pictures in the link, if you would still insist that such suspenders are in UK under the category lingerie items then I might need talk to the Web Company that sells those. They have somehow categorised that suspender under “BIG & TALL GUYS suspenders”????
Anyhow you have a Great day
I didi look at the link and hence my comments, i had missed the reference to skinheads, what is being sold as suspenders are called braces in the UK.
deedee said:
Has to be said that comparison isn't a huge amount better, , UK pants are under garments, the outer ones are trousers.
And i am missing the guys with less hair connection, suspenders in the UK are a female lingerie item.
Click to expand...
Click to collapse
hello deedee one simple question for you. Which UK online store has best range of lingerie items? I hope you will post some quick reply. Thanks in advance
My phone constantly runs out of battery when i need it the most.
I have an anycan portable power pack thing allready and its good, however i dont always remember to take it with me.
So im looking for a 2nd one and came across this little thing
http://www.ebay.co.uk/itm/EXTERNAL-...303?pt=LH_DefaultDomain_3&hash=item336667368f
Has anyone here purchased one? if so how much of a charge does it give your phone?
Or could anyone give me links to anything similar to the powermonkey for about half the price? and preferably in the UK as im going away in a weeks time.
Thanks
just seen this, sounds good for the money, another listing for the same looking items shows same figures as the power monkey?
http://cgi.ebay.co.uk/2200-Li-Ion-P...ories_MobilePhoneChargers&hash=item41552d55f7
http://www.coolermaster-usa.com/product.php?product_id=3001
This one works very well, much better than that one, i bought it for 20 euro's in a local electronic store, charges it 2,5-3 times from 15-100
Thanks for that. Does it hold enough power to give the desire 1 full charge or more ? ?
And can you plug in your own usb cables or does it have a different connector?
Cheers
I re-read your post last night(2am) and orderd the advanced pack for £19.99.
good price, free post and the item sounds decent!
I should hopefully have it by wednesday/thursday so just in time for me to go away on sunday.
I think you'll already know, you can put any usb(cable) in it, only if you charge the thing itself it uses MINI-usb(not micro like desire) so don't lose that cable and use the one you got.
PS: i don't use the torch but it is a very good one, provides a lot of light.
Yes i read up on it, expansys have posted it out allready so should be with me in time for my trip
I got the advanced kit aswell so im happy about that.
And i have plenty of torches so cant see myself using that much either tbh.
Thanks again for pointing me in the right direction!
BIG praise to exansys as i orderd it around 2am yesterday morning and it was waiting for me when i got home from work today.
I will be plugging it in very soon for its 1st 8hr charge as it has no charge at all right now.
I have 1 question for you though TopGear63z, the smaller pouch, is it supposed to be a single compartment pouch or has the lining come away from one side of mine?
Thanks
as you have an advanced kit> you should have such a pouch without it.. the big one is for the thing itself+ the cable> the small one is just for the car charger or on of the other things> so it doesn't need that lining as the big one has.
Im fussy so i will try and get it changed lol
So i gave the thing a full 8 or 9 hours first charge and used it to charge my phone whilst at work today.
Fully charged my phone, choiix unit down to 2leds from 4.
Im really pleased with it and highly recommend it to everyone!!
TopGear63z said:
http://www.coolermaster-usa.com/product.php?product_id=3001
This one works very well, much better than that one, i bought it for 20 euro's in a local electronic store, charges it 2,5-3 times from 15-100
Click to expand...
Click to collapse
Thanks, this one is good to me.
hey i have a little problem witch my touchstone, ive bought it a month ago brand new & sealed from ebay.
the first 3 weeks it worked floweless but since a week or so whenever i but my touchpad on it to charge, the charging banner keeps poping up and poping up and so on and it wont stop even when i take the touchpad back of the touchstone, so i have the restart the pad...
i completely resetet the pad using the doctor, nothing changed..
charging with the wire still works but it kinda sucks spending relatively much money for the touchstone when it doesnt works...
any ideas on that?
big thanks in advance
I assume this is happening when booted into Webos, if so I would try calling HP and asking for a replacement. It would not be unreasonable to assume you bought it last September and therefore still under warranty even if you can't find the receipt! They will probably just send another one . Hopefully the fault is with the charger rather than the Touchpad.
yep when booting in webos
i will contact hp and maybe they replace it
yes i hope so otherwise i have an even bigger problem :/
thank you for the tipp
codehunter13 said:
yep when booting in webos
i will contact hp and maybe they replace it
yes i hope so otherwise i have an even bigger problem :/
thank you for the tipp
Click to expand...
Click to collapse
Here is there local # for Germany 069 29993 161
Mon-Fri 9am-6pm local time .
Please let me know if they ask for the device to be returned or if they just send a replacement. Good luck .
again thank you very much, i will try it on monday
sure i will post what happened and if they replaced it
Edit: okay im not sure if this is a joke, i called them but nothing happened, i was in this phone loop for a half an hour before i hung up also i tryied the chat but it appeared a message that all of the support stuff are busy at the time and that i should try it tommorrow...
so i will try it again tomorrow and hope for the best^^
codehunter13 said:
again thank you very much, i will try it on monday
sure i will post what happened and if they replaced it
Edit: okay im not sure if this is a joke, i called them but nothing happened, i was in this phone loop for a half an hour before i hung up also i tryied the chat but it appeared a message that all of the support stuff are busy at the time and that i should try it tommorrow...
so i will try it again tomorrow and hope for the best^^
Click to expand...
Click to collapse
The last couple of times I have called this month to have the back cover replaced on 2 Touchpad's I have had to hang on about 10 minutes. For me it goes through to there call center in Brazil. The repairs are done in the UK at Ashford . Six months ago they were being done in Hungary. They are probably busy as most people are coming to the end of there warranties. I am not sure if their chat service is still working but I would still try to talk to an actual person on the phone.
Good luck for tomorrow.
Just tried calling HP to check the status of my repair, and listened to music for 15 minutes before being disconnected!!!
---------- Post added at 10:29 AM ---------- Previous post was at 09:38 AM ----------
Update Just tried HP again and got through straight away. Mine is being shipped now. Also it was Brazil and they also handle calls from Germany. So it's worth trying again or recalling if you're kept on hold to long. :fingers-crossed:
sstar said:
Just tried calling HP to check the status of my repair, and listened to music for 15 minutes before being disconnected!!!
---------- Post added at 10:29 AM ---------- Previous post was at 09:38 AM ----------
Update Just tried HP again and got through straight away. Mine is being shipped now. Also it was Brazil and they also handle calls from Germany. So it's worth trying again or recalling if you're kept on hold to long. :fingers-crossed:
Click to expand...
Click to collapse
Good luck!
ok this is getting ridicules, chat still doesnt work and the first time i called i was disconnected after 15min and the second time i hung up after 25min...
maybe i will try it agein later...
EDIT:
ok today i finally made it and talked to one from the support, he sad that it wouldnt be any problem if i had a bill but unfortunetly i bought it on ebay from privat and the seller doesnt have a bill...
so i need some kind of bill..
any ideas or can anyone provide a bill, i swear i bought it legit and i dont wont to scam anyone, i just want a functional touchstone in case of doubt i can show the ebay transaktion, photos etc
@sstar: they sad i can keep my touchstone and they will send me a new one
Have you tried unplugging the Touchstone for a while then plugging it back in? I was having a problem with the dock not working and that fixed it. Also, make sure the plug is attached to the USB cable securely.
codehunter13 said:
ok this is getting ridicules, chat still doesnt work and the first time i called i was disconnected after 15min and the second time i hung up after 25min...
maybe i will try it agein later...
EDIT:
ok today i finally made it and talked to one from the support, he sad that it wouldnt be any problem if i had a bill but unfortunetly i bought it on ebay from privat and the seller doesnt have a bill...
so i need some kind of bill..
any ideas or can anyone provide a bill, i swear i bought it legit and i dont wont to scam anyone, i just want a functional touchstone in case of doubt i can show the ebay transaktion, photos etc
@sstar: they sad i can keep my touchstone and they will send me a new one
Click to expand...
Click to collapse
I have just had HP send me a new touchstone for which I did not have a receipt and noticed on the box it says that the product warranty is for 2 YEARS so there shouldn't be any argument about when it was bought as they only went on sale 13/14 months ago.
I would try HP again.
Good luck.
The TP seems pickier for charging on Touchstone with 3.0.5 compared to earlier versions (3.0.2) etc. It only charges in certain positions with me on 3.0.5 while before it was less picky.
so unfortuanetly i didnt read this thread for some time, so i bought another new touchstone and then i called hp again...
yeah today i recieved the replacement for my damaged one, so now i have two new functional ones
so if anybody wants to buy a brand new touchstone, straight from hp, i got one!
codehunter13 said:
so unfortuanetly i didnt read this thread for some time, so i bought another new touchstone and then i called hp again...
yeah today i recieved the replacement for my damaged one, so now i have two new functional ones
so if anybody wants to buy a brand new touchstone, straight from hp, i got one!
Click to expand...
Click to collapse
I did post and PM you a month ago, oh well its always worth having a spare.
ive seen it the time i saw this thread again..so to late but thank you for your tipp
i guess, when somebody is interested i will sell it, otherwise it will be a spare one^^
Is the Touchstone a worthwhile investment, in your guys' opinion?
inducer said:
is the touchstone a worthwhile investment, in your guys' opinion?
Click to expand...
Click to collapse
yes, yes, yes.
Hi everyone
My X2 is arriving tomorrow, but I tend to see in the long term : As the battery is the first limitation to the lifespan of this machine, does anybody know where to find a replacement ?
Disassembly looks complicated but not out of the question, but I wasn't able to find place to buy the battery from. No emergency yet, I think I have about a year before the problem arises
Try here : http://www.maxbhi.com/battery-for-huawei-mediapad-x2.html
But they don't send international, so if you figure a way to get a hand on the battery, I would love to buy something from that site aswell.
Just a quick info : I've discovered and explored Aliexpress, and it's a wonderful ressource for our x2's parts. After having found a replacement for my broken screen there, I eventually checked for batteries, and of course here they are :
http://www.aliexpress.com/wholesale...B_20160725004238&SearchText=huawei+x2+battery
hope it helps
Moxybul said:
Hi everyone
My X2 is arriving tomorrow, but I tend to see in the long term : As the battery is the first limitation to the lifespan of this machine, does anybody know where to find a replacement ?
Disassembly looks complicated but not out of the question, but I wasn't able to find place to buy the battery from. No emergency yet, I think I have about a year before the problem arises
Click to expand...
Click to collapse
I have no idea what is in it but if it is a "non removable" battery then my guess is that you could just search for lipo cells on Alibaba or wherever for a cell of similar dimensions. They should all be 3.7v but just check the old cell to be sure that a new cell would power it properly.