Related
Anybody got good or bad things to say about the Jabra 250 earpiece at all please? Does it need software and if so what, where cost???
Thanks
Pete
Easily available in the UK thanks
It shouldnt need software, its a bluetooth device so should work out of the box, however you will not get many of the features with the current bluetooth stack on xda 2.
I guess you mean the currentbluetooth software on the XDa. Can you advise is there any way to upgrade it and if so what are the benefits?
I have a Jabra with my XDA II and it's excellent.
In windy conditions it can be make it difficult for you to be heard. Otherwise it's great.
Allways bonds without trouble and calls are handed over every time.
I hated it. Worked fine, just hated how it fit, the comfort (lack of), and how the buttons work. I tried a whole bunch of headsets, and liked the HS820 most.
I've posted alot of pro and cons abt the Jabra....
Just to add to some of the cons:
1. If you are the type that uses hair gel, oil, perfume or something like that, be prepared as the metalic gray colour might discolor and come off.
2. Be extra careful when handling the Jabra....mine broke...if you noticed there is a screw that attaches the black body with the top one. If you bend the area there might be chances that the screw mounting might break.
I have it and I love it.
However if you wish to use it outside the slightest bit of wind makes you totaly impossible to hear. So for use in the car or inside it rocks but with wind it s**
Its great.
Only problem I've had with it is the grey part of the case has cracked but that due to where I used to wear it. Doesn;t affect the operation in any way.
I actually find it really comfortable to wear and often have it on all day. I do find in windy conditions not only am I difficult to hear but I also find it difficult to hear properly even with the volume turned right up.
But then again, I suspect none of the headsets will tackle the problem of wind noise.
Only fault I can say is the lack of mute but I think thats due to the profile and not the headset.
Bluetooth earpeices or Headsets
I had a Jabra I could get to grips with it, but many people say its fine. Thats why back in June this year I sourced my own from China...
Since I posted this note below, back before the melt down, I have had a lot of interest and buyers for an Item which I use every day all day. I've had great reports back too.
I now have a website so if you want info you can go there are feel free to contact me direct.. These will be the best spec, fully loaded with goodies and very cheap at £34.98 delivered.. 12 month warranty and 14 day moneyback if you don't like it of any reason... no questions asked..
HTTP://www.blue-tooth-headsets.co.uk
****************Here was my first mailing.....****************
Hi Everyone
BT headsets have been a thorn in my side for sometime now... I have had problems with Bluetooth headsets and my XDA II, I spent loads of money on all the top models and found something quirky for me with each of them, too bulky, poor talk time, ear hook interferes when wering glasses, car chargers or uSB chargers are extra, no mute, voice dail or auto reconnect facility. My list went on....
Well if you want something doing right or for free, do it youreself, as we say in Yorkshire England...... So that's what I have done.
I researched manufacturers in China able to produce a light weight (16mgs), small (54mm long 12mm thick 20mm wide) product with talk time of 6 hours and a standby of over a week! The earpeice doesn't need a ear hook, it auto-reconnects, it voice dials and mutes. You can pair it with your XDA and 7 other handsets if you really want. It works with all V1.1 compliant mobiles on either headset or handsfree modes.
Better yet it comes with a car charger, wall charger and USB charger in a gift box. Other goodies include 3 interchangeable ear cups, an ear hook if you want to use it and 12 month warrenty....
I have had one on trail for 2 months, while I negotiate with them to release it outside of Asia ( as it is very new product and only on general realese over there 1 month ago). Well they have sucummed and obtained the all important FCC & CE approval and they have agreed to ship a limited supply to the UK..... only 500 in total available in 2 styles, ten colourways..
What does it cost..... well that is the best bit.. something this good I thought it would be eighty quid but I have got them down to £35 ($63) plus P&P. If anyone is interested I can give you more details and piccies....
BT headset
Are you going to offer a wall charger for the US?
I have the Plantronics M2500, actually got it for the crappy a** Ipaq h6315 and of course wasn't stable enough to use at all. But it works perfectly with the Qtek 2020. The microsoft stack may stink but it is much more usable than the Widcomm Version for PPCPE
I have the sony ericsson hbh-65 and I think it is a very good earpiece, clear audio, good volume range, very small and light and it works.
Jabra 200 and XDA2?
Hi, I just bought the Jabra 200 and I'm having serious problems getting it to work with my XDA2. The pairing/ bonding seems to be fine!? There just doesn't seem to be any way of actually switching on the bond?
i.e. Jabra 200 continues to blink every 3 secs (standby mode). Can't get the 2 devices to work as they should?
Any suggestions? Bought my XDA in Asia (ROM 1.66.00WWE, Radio:1.08.00)
Thanks,
Jam
This may be a silly question but have you enabled bluetooth headset mode on today screen? Also I assume you answered yes to the question "this device supports headet mode, do you wish to enable"
another silly question....
For some reason i "deleted" Bluetooth mode enabling from today screen.... How can i put it back ???
I tried Settings/today..... but it doesn't appear anywhere. Can't remember this damn shortcut....
can you remind me ?
BT, PDA, PC
I want to buy a Jabra headset for my i-mate (Himalaya), but I also want to use it with Skype on my PC (basically as a headset/mike combo). Does anyone know if this is possible?
I have a Jabra BT250. Actually I have had two. The first one overheated and crapped out on me while I left it to charge overnight. The second one the microphone stopped working. :x
My overall impression of the headset was when it works, it works well, but I had pretty poor luck. My wife definitely made fun of me when I wore it. It also can be somewhat slow to answer or transfer from headset to handset. Overall on a scale of 1-10 I give it a 6.5.
:idea: FYI, one of the things that I did do that fixed the wind issue when I used it outside was to take one of the foam covers off of an old Jabra EarBoom that was broken, and slipped it over the mic part of the BT250. It kept the wind noise down a LOT more. I am sure you can find the foam covers cheap just about anywhere. (Radio Shack comes to mind). Just a suggestion.
I want to buy a Jabra headset for my i-mate (Himalaya), but I also want to use it with Skype on my PC (basically as a headset/mike combo). Does anyone know if this is possible?
Click to expand...
Click to collapse
It is possible, but it very much depends on the BlueTooth stack on the PC - I have an MSI BT USB dongle which didn't work at all, and a generic, no-name BT USB dongle with the WidComm 1.3(ish) stack that works fine.
Bluetooth Headset
I just bought a mint used Sony Ericsson HBH-65 off e-bay and I'm very impressed with it. The bonding went smoothly, it holds a bond, doesn't drop calls and is very clear. I've used Jabra headsets in the past and compared to the SE they are cumbersome. The thing I miss the most is voice dialling, surely the whole point behind BT headsets, unless the XDA is in a cradle where you can still access the 'phone keypad (isn't that still a driving offence as you're touching your'phone???).
Hi,
The sound in the headset that comes with the Trinity is quite bad and I really want to get a better one. Does anyone know if there is anyone making good headsets (prefferrably in-ear earbuds) or alternatively a plug converter such that I can use my normal headset with the usb plug on the trinity.
This should be the nice solution for you : http://www.expansys.com/p.aspx?i=142091&asource=HTC _P3600
(i'm getting one too, cause the BT stereo isn't that great at all...)
HTC Stereo Converter
Check this one:
11pins to 3.5mm Stereo Head Jack Converter for HTC devices.
http://shop.brando.com.hk/htcstereoconverter.php
Or you could check this site out. I ordered mine already and it's on the way.
http://www.doml.com/productdec.asp?pid=2698&model=d_d810&modeln=P3600
I ordered from brando a couple of days ago. Wanted a silicone cover too, but he did not have those yet.
sweet thanks for the links!
the mini usb to 3.5mm converter just have a problem doesn't support microphone function...
need to remove every time you receive a call...
Any other solution... like a normal headset with microphone and a mini usb?
the oem headset's sound quality is really bad, but i recognized that you can turn music much louder than older devices like my old wallaby
on expansys search for ORA usb to jack converter. there's a version that has a microphone.
Solution
This will solve the problem for me!
http://www.expansys.se/p.aspx?i=145154
i'm looking to use my p3600 for line in recording of a djset. would that be possible with a custum adapter.
iow does the audio in on the usb port support stereo sound?
2much4me said:
This will solve the problem for me!
http://www.expansys.se/p.aspx?i=145154
Click to expand...
Click to collapse
This one looks cool... but can I know what is the approximate price for this in USD?
W100
it's cost 34€95...
This is an official HTC addon.
This is the HTC P3600 W100 ...
Cost
http://www.mobileplanet.com/p.aspx?i=145154
$41.95
Got a Bose QC3 noisecanceling headset today.
Wouwwwww!!!!!
What incredible sound, what incredible bass!
Expensive, but it's worth it.
does anybody tried this
http://www.expansys.com/p.aspx?i=139893
with FM,RDS and 3.5mm
I personally picked this up
http://cgi.ebay.com/ws/eBayISAPI.dl...MEWA:IT&viewitem=&item=140107857073&rd=1&rd=1
I don't know if it's going to work or not, I'll post and let everybody know when I recieve it. The reason I opted for a 2.5mm headset is because I have like 3 of them lying around because my old phone used a 2.5mm and I didn't want them to go to waste.. if it doesn't work or if the sound quailty sucks I'll give a motorola mini usb headset a try.
vanydotk said:
I personally picked this up
http://cgi.ebay.com/ws/eBayISAPI.dl...MEWA:IT&viewitem=&item=140107857073&rd=1&rd=1
I don't know if it's going to work or not, I'll post and let everybody know when I recieve it. The reason I opted for a 2.5mm headset is because I have like 3 of them lying around because my old phone used a 2.5mm and I didn't want them to go to waste.. if it doesn't work or if the sound quailty sucks I'll give a motorola mini usb headset a try.
Click to expand...
Click to collapse
I can tell ya ahead of time that this will not work. The moto pinouts are different from the HTC proprietary pinouts. You need to get one made for HTC phones.
RebelShadow said:
I can tell ya ahead of time that this will not work. The moto pinouts are different from the HTC proprietary pinouts. You need to get one made for HTC phones.
Click to expand...
Click to collapse
Hmm in that case, do you know of any headsets for the Trinity that is a single earpiece headset and not the double it comes with?
open stock headset
vanydotk said:
Hmm in that case, do you know of any headsets for the Trinity that is a single earpiece headset and not the double it comes with?
Click to expand...
Click to collapse
why not just cut off the unwanted earpiece....
anyone managed to open the mic box on the stock headset? does it just have snap locks or is glued? I would break it open, but the operative word would probably be Break. I was considering just changing the ear phones over to some expensive ones to improve sound quality without losing the mic and usb connection.
Speedn
edit: no glue, just snap locks. Push in on the walls of the mic box on the large bit, (the bit with the button in it). slide ya fingernail into the gap an prise the top small piece off. Caution the small top piece has small pins in it so pull it straight up and not to the side.
remove old earpieces and solder new ones on, its even got L- L+ R- R+ labelled for ya.
I havent actually progressed to the attaching of new phones yet, will pick some up over the weekend mebbe.
Enjoy
Hi All,
I just bought this item from ebay. Very happy with the quality of product but the only problem i'm having is that if i try and call somebody while it is in the holder i can hear the person through car radio fine but the phone mic does not work... Is there away around this?
Picture 1
ray_tindall said:
Hi All,
I just bought this item from ebay. Very happy with the quality of product but the only problem i'm having is that if i try and call somebody while it is in the holder i can hear the person through car radio fine but the phone mic does not work... Is there away around this?
Picture 1
Click to expand...
Click to collapse
Hi All,
Before the site went down someone had asked if it had an external mic.. which is does not. The only thing i can think of if somebody would be kind enough to help me out so everytime i plug the Diamond into the car kit i run a program which changes the registry to allow mic to be enabled while in cradle. As i do not have those skills was wondering if somebody could help me out. Willing to donate to anyone that help me.
Regards
Ray
So that thingy you got there acts like a headset?
I guess it's possible to find the registrykey for enabling phone mic while headset is active...
yes that is right...... all it does is just transfer the sound via FM transmitter to radio in car. all i need help with registry keys. a program like diamond tweak would be cool where you could just enable and disable.
i am also interested about this product. Could you please tell me if the car charger charges the phone's battery or the transmitter's (if it has one)?And a second one:can i use the transmitter without the charger connected?
Can you link to the seller you bought this from? I'm looking for the exact same thing. Also interested in getting the phone mic working while in headset mode.
silex said:
Can you link to the seller you bought this from? I'm looking for the exact same thing. Also interested in getting the phone mic working while in headset mode.
Click to expand...
Click to collapse
co-sign. Link please. I'm interested in buying possibly.
here you can find one, ill order mine today to I think
http://cgi.ebay.nl/For-HTC-Diamond-...id=p4634.c0.m14.l1262&_trkparms=|293:1|294:30
here you can find one, ill order mine today to I think
http://cgi.ebay.nl/For-HTC-Diamond-...id=p4634.c0.m14.l1262&_trkparms=|293:1|294:30
The charger that comes with it doesn't look like it'll work with the Diamond, based off of these pictures (non-usb). And does any1 know of an American/English site I could buy it from?
I've just ordered one. I expect it doesn't just power the FM transmitter but also the Diamond. I am hoping to get around the microphone issue by using bluepower to enable my bluetooth connection when it is charging and then using a bluetooth headset. I don't really want to use this FM transmitter/charger as a hands free device, but just keep using my bluetooth headset instead.
I will report back it this all works when I get it!
Ok, the thing finally arrived.... After 20 minutes of playing around with it, it is already broken.... Here's the story:
It arrived with no instructions (not that any are needed) and appeared to be of poor quality manufacture. Not like the Brodit one which I intended to replace with it.
My Diamond didn't slide in very well at all. It took a lot of fiddling to get the male charger into the female diamond mini USB. They weren't lined up very well. I expect that as the Diamond is far superior in quality, it is not the Diamond that is at fault but the charger/transmitter.
Once connected, the music quality was very good at times. I compared this to my ipod (which is connected directly to the car arial) by playing the same song on both. The music quality from the Diamond was actually better, so the FM transmitter was working well indeed.
However, there are intermittent "noises". I don't really know how to describe these as it was not typical interference, but kind of basey crackling. This was very intermittent though and this could be caused by being tested in London where there are hardly any frequencies free. I contined my test on various frequencies even when not moving the car and this noise was there on all of them....
I think this would have been enough to make this device annoying enough to be binned in itself.
A third attempt at inserting my Diamond in the cradle was much easier. Well, that's what I thought.... The male USB in the FM transmitter had actually broken now. It had slid back into it's casing. The only way to retrieve it would be to break the damn thing open. Enough was enough. I had finished my experimenting with this thing.
To make matters worse, the thick film on the home/back/talk/end part of my Diamond is now peeling off. I assume my struggling to get it in this FM transmitter cradle had snagged it. That's a real bugger because I guess that as it has now started to peel off, it will continue to snag on everything and eventually tear off completely. I'm not sure how this will affect it's functionality, but it certainly won't help. I expect the capacitive sensor in sensor scroll will no longer work once it has peeled off fully..... Probably time for a Diamond 2!!!
To conclude, my advice is not to buy this product as it (1) may harm your Diamond; (2) waste £20odd; and (3) cause frustration with the "noise".
The good points with this though, if you do decide to go ahead, are that you can use a bluetooth headset (with Bluepower). So if a phone call should come in whilst you are listening to music, you can simply take the call through the bluetooth headset and the music is automatically turned off. The microphone on the headset is used....
mitsi said:
Ok, the thing finally arrived.... After 20 minutes of playing around with it, it is already broken.... Here's the story:
It arrived with no instructions (not that any are needed) and appeared to be of poor quality manufacture. Not like the Brodit one which I intended to replace with it.
My Diamond didn't slide in very well at all. It took a lot of fiddling to get the male charger into the female diamond mini USB. They weren't lined up very well. I expect that as the Diamond is far superior in quality, it is not the Diamond that is at fault but the charger/transmitter.
Once connected, the music quality was very good at times. I compared this to my ipod (which is connected directly to the car arial) by playing the same song on both. The music quality from the Diamond was actually better, so the FM transmitter was working well indeed.
However, there are intermittent "noises". I don't really know how to describe these as it was not typical interference, but kind of basey crackling. This was very intermittent though and this could be caused by being tested in London where there are hardly any frequencies free. I contined my test on various frequencies even when not moving the car and this noise was there on all of them....
I think this would have been enough to make this device annoying enough to be binned in itself.
A third attempt at inserting my Diamond in the cradle was much easier. Well, that's what I thought.... The male USB in the FM transmitter had actually broken now. It had slid back into it's casing. The only way to retrieve it would be to break the damn thing open. Enough was enough. I had finished my experimenting with this thing.
To make matters worse, the thick film on the home/back/talk/end part of my Diamond is now peeling off. I assume my struggling to get it in this FM transmitter cradle had snagged it. That's a real bugger because I guess that as it has now started to peel off, it will continue to snag on everything and eventually tear off completely. I'm not sure how this will affect it's functionality, but it certainly won't help. I expect the capacitive sensor in sensor scroll will no longer work once it has peeled off fully..... Probably time for a Diamond 2!!!
To conclude, my advice is not to buy this product as it (1) may harm your Diamond; (2) waste £20odd; and (3) cause frustration with the "noise".
The good points with this though, if you do decide to go ahead, are that you can use a bluetooth headset (with Bluepower). So if a phone call should come in whilst you are listening to music, you can simply take the call through the bluetooth headset and the music is automatically turned off. The microphone on the headset is used....
Click to expand...
Click to collapse
Good Looking man, preciate that review. I think i'm just gonna stick with a simple cassette adaptor to play music through the car. That way you don't have to worry about the static noise.
That's unfortuante that it's not the best build quality. How snug is the fit? I have a Sprint Touch Diamond so I might have to get the Touch Pro version to ensure it fits, but it might not be snug enough. More importantly, I'd rather get the phone's mic working with it and just activate the mic when in handsfree mode.
I live in Australia and on the first moderately hot day the whole thing pretty much fell apart, turns out they have used cheap hot glue to join every piece.
First the pole going into the suction cap fell out while i was driving, so i repaired it with decent glue. Then, later the mirco USB plug sticking out of the base disappeared inside, and after i pulled the holder apart i found it was also held there with the same crappy glue.
Anyway i would not recommend buying this car kit but if anyone could work out how to enable the microphone it would be much appreciated
Hello guys,
apparently something happened to my earphones. I'm guessing my roomies messed with it and busted it. I can see that there's a hole in the right earphone now.
I'm in search of an earphone which is compatible with Samsung Galaxy S. Sure I can get loads of better ones off play/Amazon. but I wanted to get the one which is compatible with my phone.
can anyone suggest me some in-ear earphones with volume adjuster or perhaps link me to original one?
thanks.
Look here
There are few other threads discussing about headphone compatibility, do a search.
As I have said in the first thread, I'm using a Nokia AD-54 with my own pair of headphones. IMO thats the best way to get highest quality. Because you can connect any high quality 3.5mm headphone.
P.S: For me Samsung's bundled pair sounds pretty bad, any $30 aftermarket head/earphone will sound way better.
I did a search already, but I found few more questions instead of answers,
the thing that nothers me is the polarity (mic/spk/gnd/gnd) thing, I wonder how many headphones/earphones support that..
I dont want to invest into something that doesnt work with my phone..
do the following two work?
http://www.sennheiser.co.uk/uk/home...onal_headphones-headsets_dj-headphones_502103
http://www.jbl.com/EN-GB/Products/Pages/ProductDetails.aspx?PID=REF250BG&accT=1&tsT=0&ovT=1
I've found something for you (I expected it, to be true):
-Every normal Headphone does Work (without Heaset functionality, understandable)
-iPhone-compatible Headsets do not work on the Galaxy
Oh and in a Review about the Galaxy someone used several Headphones, all of them are working. For Example there were Sennheiser CX300.
thanks, i'll go on earphone hunting now, and will let you know how it goes.
cheers!
also these seem to be cheaper: http://www.whsmith.co.uk/CatalogAndSearch/ProductDetails.aspx?productID=34645994#
emclondon said:
I did a search already, but I found few more questions instead of answers,
the thing that nothers me is the polarity (mic/spk/gnd/gnd) thing, I wonder how many headphones/earphones support that..
I dont want to invest into something that doesnt work with my phone..
do the following two work?
http://www.sennheiser.co.uk/uk/home...onal_headphones-headsets_dj-headphones_502103
http://www.jbl.com/EN-GB/Products/Pages/ProductDetails.aspx?PID=REF250BG&accT=1&tsT=0&ovT=1
Click to expand...
Click to collapse
Link to Sennheiser site is broken. I'm not sure about the other one either. Some say Sennheiser MM50 works, but I havent tried.
As for using a regular 3.5mm ear/headphone for music, everything works. I am using several different standard 3.5mm earphones and headphones, but remember, when you receive a call you have to disconnect the headphone to talk, built in mic disables as soon as you plug in the headphone. Its annoying, thats why I use the Nokia AD-54 adapter and a Bluetooth clip when walking outside.
urbanears
If you do a Google search for Urbanears, they do a range of headphones that will work as hands free with the SGS. I have some of the over the head ones and there pritty good. They come with a variaty of headphone jack addapters for diferent phones and have an inline mic.
emclondon said:
thanks, i'll go on earphone hunting now, and will let you know how it goes.
cheers!
also these seem to be cheaper: http://www.whsmith.co.uk/CatalogAndSearch/ProductDetails.aspx?productID=34645994#
Click to expand...
Click to collapse
I use these earphones and I can say that they are the best!! Great sound quality... Extreme bass clarity
Apologise for resurrecting this thread, but I want to confirm that the Nokia Adaptor provided with the Urbanears range of headsets do indeed work with the Samsung Galaxy S.
I ordered a pair of Medis, but when the headset first arrived the Nokia adaptor was faulty, I emailed them that the adaptor wasn't working, and they responded asking for my address so they could send out a free replacement (they did not ask for any kind of proof of purchase). When the new adaptor arrived, it worked like a charm, media button and mic became functional.
Yep, the urbanears nokia adaptor works perfectly
Sent from my GT-I9000 using XDA App
Neris said:
I've found something for you (I expected it, to be true):
-Every normal Headphone does Work (without Heaset functionality, understandable)
-iPhone-compatible Headsets do not work on the Galaxy
Oh and in a Review about the Galaxy someone used several Headphones, all of them are working. For Example there were Sennheiser CX300.
Click to expand...
Click to collapse
To operate the headphones you should turn off the microphone of the iPhone, because in the Galaxy S the pins are reversed.
A test when you insert the earphones, hold the microphone, you will hear the difference.!
r3ality66 said:
Yep, the urbanears nokia adaptor works perfectly
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hey is it possible to get the adapter separately? I'm using the KVconnections one with my NuForce Ne-7m and the plug doesn't fit my cases (had to enlarge the holes in a couple already - don't want to have to do it with the rest).
emclondon said:
Hello guys,
apparently something happened to my earphones. I'm guessing my roomies messed with it and busted it. I can see that there's a hole in the right earphone now.
I'm in search of an earphone which is compatible with Samsung Galaxy S. Sure I can get loads of better ones off play/Amazon. but I wanted to get the one which is compatible with my phone.
can anyone suggest me some in-ear earphones with volume adjuster or perhaps link me to original one?
thanks.
Click to expand...
Click to collapse
That's not a hole dear. There is one upper layer of some kind of fabric thats been removed or got removed. Go to any samsung service senter they will replace it free of cost if in warranty your phone within three days.
Same happened with me but my left earphone of headphone wasn't working and this time they replaced it with the better one.. M njoying.
flamingpitofhell said:
Hey is it possible to get the adapter separately? I'm using the KVconnections one with my NuForce Ne-7m and the plug doesn't fit my cases (had to enlarge the holes in a couple already - don't want to have to do it with the rest).
Click to expand...
Click to collapse
Urbanears don't appear to sell the nokia adaptor seperately, but you could always try emailing them.
I bought my Urbanears (black set of Medis) from a third-party site, but when I contacted Urbanears directly specifying that the adaptor that came with my Urbanears did not function, they simply asked for my address and sent a replacement adaptor out to me, they didn't verify that I actually owned a pair of their headphones. Theoretically, you could send them an email pretending to be someone with the same problem, though it would of course be harmful to their business if abused.
Just a quick question: i noticed, that if i am using the stock headset with an old ipod touch, i always have to press the button to get all the sound. Is there any way to avoid this?
Greetins,
ww
DrunkDwarf said:
Urbanears don't appear to sell the nokia adaptor seperately, but you could always try emailing them.
Click to expand...
Click to collapse
Surely there are adaptors availably which are sold separately? I use a Sennheiser BT headset at the moment (MM200) but would like a pair of wired, good in-ear earphones so I have one less battery to worry about plus the sound quality is better. But the one thing I love about BT is the remote control buttons and there are very few options available for Samsung compatible wired earphones.
Can anyone recommend a good adaptor?
I bought myself a pair of samsung gtI9000 earphones from ebay for £4 :/.
works like a charm!
DrunkDwarf said:
Urbanears don't appear to sell the nokia adaptor seperately, but you could always try emailing them.
Click to expand...
Click to collapse
I've also found another set of adapters that might work: http://www.amazon.com/Native-Union-Adaptor-Blackberry-Phones/dp/B003NVM9HK, but given that the Medis is available for $USD50 I might just grab that and have a spare set of headphones.
webwude said:
Just a quick question: i noticed, that if i am using the stock headset with an old ipod touch, i always have to press the button to get all the sound. Is there any way to avoid this?
Greetins,
ww
Click to expand...
Click to collapse
Yes - use a rubber band to keep the button pressed
I use this adapter to make my NuForce NE-7Ms work with the SGS: http://www.kvconnection.com/product-p/km-354r3m-r2f.htm. In theory you should use this one since you're doing the reverse: http://www.kvconnection.com/product-p/km-354r2m-r3f.htm, but they should be the same. As I said earlier, it works well but is bulky and doesn't fit my cases without modding
I can confirm two headsets working (tested) with I9000. The first one is Sennheiser MM-50 Nokia (the Nokia part is important, as they do also them for IPhone), second are the Stock Nokia's E52 ones.
After ripping my original headset I'had bought the Sennheiser's headset and must say I am quite pleased with them.
Cheers
So there is no headset with Nokia ad-54 functionality...
I mean there is no way to plug in my earphones and control calls/music... Exept of soldering iron... it's sad.
Am i right in thinking that the CU S420 doesn offer any kinds of handsfree? Its basically just a charger and holder?
If not, is there anything available which is similar, but offers handsfree/speaker as well?
Thanks.
You're right, even though it is possible to use the phone speaker and mic from the car, much as you could anywhere else (except the phone goes on speaker by itsself when its in the dock).
As carkits go, the sound is awful. A more powerful speaker system would make listening to it in a (relatively noisy) car a lot more pleasant. A decent directional microphone would pick up on a lot less noise than the builtin mic does.
You might want to look into a separate bluetooth carkit with a separate microphone. This kit does offer a solid and stable holder for the phone as well as a charge cable.
thanks.. ordered one, will couple it with a parrot ck3100 now, thanks.
got one of these now.. very well made, but the lining up of the power plug into the phone is a nightmare. They should have left the top open and just let people slide the phone in.
Can anyone recommend a carkit better than this then? I've heard that the car panel doesn't load if you've got 2.2 either?
I'm try to find my dad a good in-car dock and I want to be able to couple it with a form of car dock panel?
Not much information is written regarding this particular car holder. I have decided to buy it, after spending money for a cheaper one from PhoneM8, which is ok but not great... I am VERY happy I bought the CU S420.
If anyone is interested, I have written an extensive review of the CU S420 on amazon:
Click to go to my review on amazon
Read that on Amazon. Just to make shure: This dock automatically triggers Car Home on the Desire?!
I've been looking for that feature a long time and avoided buying this cradle because of its price until now. Did you ever try to launch successfully any other car dock app with this cradle (Custom Car Home, MyCarDock e.g.)?
rootrider said:
Read that on Amazon. Just to make shure: This dock automatically triggers Car Home on the Desire?!
I've been looking for that feature a long time and avoided buying this cradle because of its price until now. Did you ever try to launch successfully any other car dock app with this cradle (Custom Car Home, MyCarDock e.g.)?
Click to expand...
Click to collapse
Yes it does. It turns car mode on and launches any installed software for car mode. I have tried google car home (imho the best) and navipanel.
Feel free to ask any other questions... Best regards.
Thanks a lot. Further questions will be answered by the dock itsself.
I already ordered one this afternoon.
Sorry for re-opening this old thread.
Could anyone owning the CU S420 let me know whether or not they believe a HTC Desire fitted with a protective case (Otterbox in my case) would still fit into this car holder?
Thanks
No, it won't. It's a very tight fit.