does anyone know a way to force brom mode on A22 5G with KG locked?
obs: I tried to do it using android utility tool and ended up getting stuck on the black screen
Plug the phone in whilst holding:
Vol + and Vol -
melksants said:
does anyone know a way to force brom mode on A22 5G with KG locked?
obs: I tried to do it using android utility tool and ended up getting stuck on the black screen
Click to expand...
Click to collapse
You may need to short test point.
mvikrant97 said:
You may need to short test point.
Click to expand...
Click to collapse
I already tried test point, but it is stuck in the mtk port and does not turn on
melksants said:
I already tried test point, but it is stuck in the mtk port and does not turn on
Click to expand...
Click to collapse
Do not short the test point for long time it may damage the resistor and your phone will auto MTK port.
melksants said:
I already tried test point, but it is stuck in the mtk port and does not turn on
Click to expand...
Click to collapse
Damn, I'm still stuck there with my a22 5G as well, you can probably get it out of that with unlock tool and a firmware dump from another users bin..... I nearly got mine out but if you see for first time DM, make sure you're ready to odin or else it might go back to brom
Decmanager said:
Damn, I'm still stuck there with my a22 5G as well, you can probably get it out of that with unlock tool and a firmware dump from another users bin..... I nearly got mine out but if you see for first time DM, make sure you're ready to odin or else it might go back to brom
Click to expand...
Click to collapse
I had to unbrick the system using an BOX + ISP connection, with the latest security updates it no longer enters brom mode, only preloader, and when you force brom mode on the a22 5g it dies
Related
I try all commands and procedure like volume+/- and power button all things but still screen is black and when i connect it to pc in manager it show me qualcomm 9008..
And when i flash it with msm tool oneplus 9 msm tool india it always show me error
Wrong suggestion, so I edited it out. Good luck unbricking
noname122414 said:
Wrong suggestion, so I edited it out. Good luck unbricking
Click to expand...
Click to collapse
How?
I saw in another post that you are aware of your chinese version. So you probably already tried flashing this version ( https://forum.xda-developers.com/t/official-oneplus-9-oxygen-to-color-and-back.4256457/ ) just patch the to Oxygen again on the chinese version.
How i can patch i told my phone is stuck in Edl mode hard brick
So no fastboot commands are working? Fastboot devices says nothing? Say what you tried, and your current situation in as much detail as possible. People can only help you when they understand what happened and what is still possible to do.
Brother my device is stuck in Edl mode because when i connect to pc it show me qualcomm 9008 in device manager..
I tried all Fastboot commands, power + , power - button & power button but nothing happened still device stuck in Edl mode and also msm tools of india doesn't work
Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.
Y
nujackk said:
Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.
Click to expand...
Click to collapse
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9
Wolverine619 said:
Y
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9
Click to expand...
Click to collapse
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.
nujackk said:
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.
Click to expand...
Click to collapse
Do you told me about solution?
My phone battery was 100% when it's stuck in Edl mode any idea for 100% to 0%?
Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash
nujackk said:
Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash
Click to expand...
Click to collapse
See brother
I see what you mean. Not sure what sahara error state is. Not sure you'll be able to fix that on your own. You may need to contact oneplus see if they can help. They tend to be willing to help in most cases. But may cost you since I'm sure this wouldn't be covered under warranty.
sahara error usually happens when you flash the wrong firmware.
noname122414 said:
sahara error usually happens when you flash the wrong firmware.
Click to expand...
Click to collapse
Can anyone tell me how to fix it?
Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.
noname122414 said:
Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.
Click to expand...
Click to collapse
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool
Wolverine619 said:
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool
Click to expand...
Click to collapse
"Payload dumper 64" can get the files for you that's an application there is also a python script which does the same.
I personally used "payload dumper 64" then flashed the files vis fastboot to recover 2 Chinese variant until now( you have to use the right rom which is normally used to switch from Chinese rom to Oxygen)
This is just how I recovered the phones.
Edit: sorry it's late you are probably looking for the msm download tool files, I probably messed things up
I tried to unlock the oem/bootloader on my new OnePlus 7 pro (t-mobile unlocked sim) and managed to brick it pretty bad. When i plug it into the computer to try some kind of recovery its stuck in a loop where it connects and disconnects. I am unable to see it in adb. The drivers were working before so i don't think that's the issue. Any Ideas?
Boot into bootloader by using the buttons power+ vol down.
Then you can flash the rom
Or have you tried getting into recovery with power + vol up?
So you are getting the param preload error too with MSM Flash tool?
I saw your post in another thread just now
Kenora_I said:
So you are getting the param preload error too with MSM Flash tool?
I saw your post in another thread just now
Click to expand...
Click to collapse
i think i used the wrong MSM flash tool and that is what bricked my device. im going to try this guide right now: https://forum.xda-developers.com/t/msm-tool-guac-for-all.3934691/
Sure try it.
It can be the issue but if it doesn't work, ill be here to help anyway
Kenora_I said:
Sure try it.
It can be the issue but if it doesn't work, ill be here to help anyway
Click to expand...
Click to collapse
Thank you so much and for your quick response!
sudozeus said:
Thank you so much and for your quick response!
Click to expand...
Click to collapse
Anytime, im always here anyway
I'm hoping someone can help me out here. I've been trying for hours to restore my OnePlus 8T with the global MSM tool and I keep getting the Sahara communication failed error over and over again. My drivers are successfully installed and I've tried 5 different USB ports and 3 different types of cables and nothing works. I've tried rebooting my PC multiple times, and 2 out of the 3 cables I've used are official OnePlus cables.
Some_Random_Username said:
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
Click to expand...
Click to collapse
I AM STUCK IN EDL. ALL I GET IS SAHARA COMMNICATION FAILED. I NEED HELP
1
Hi, RootK1t...
Thank you soooooooooooo much for this !
This little and powerful trick brings my old OPPO R7 Plus back to life !!!
I have similar problem, but my phone is totally dead. can't enter EDL, Bootloader or Recovery.
is there anything I can do?
andrew_yousry said:
I have similar problem, but my phone is totally dead. can't enter EDL, Bootloader or Recovery.
is there anything I can do?
Click to expand...
Click to collapse
andrew_yousry said:
I have similar problem, but my phone is totally dead. can't enter EDL, Bootloader or Recovery.
is there anything I can do?
Click to expand...
Click to collapse
EDL is a Emergency Download Mode thats cant Destroy by Software!!
Hello everyone,
History : So i was using Rice driod on my OP 8T peacefully and i got an update on the rom. i installed the update via local update of the rom and after reboot the phone never booted back. i tried all button combos to make to boot anything like fastboot or recovery etc but nothing worked.
Problem : While connecting to PC the device shows as "Qualcomm HS Diagnostic 900E" I know it should show as 'qualcomm hs loader 900' something which indicates EDL state. So i can't perform MSM. There are not port showing in MSM either. Its blank. Even after forcefully trying to boot EDL ( button combos ), it always boots back to same state.
Fixes i have tried : Reinstalled qualcomm drivers many times, also tried many other versions of MSM including the Hydrogen OS one. No solution.
Can anyone please help me with this situation. Its been few days now and i have really no hope left with the device.
alp47470 said:
Hello everyone,
History : So i was using Rice driod on my OP 8T peacefully and i got an update on the rom. i installed the update via local update of the rom and after reboot the phone never booted back. i tried all button combos to make to boot anything like fastboot or recovery etc but nothing worked.
Problem : While connecting to PC the device shows as "Qualcomm HS Diagnostic 900E" I know it should show as 'qualcomm hs loader 900' something which indicates EDL state. So i can't perform MSM. There are not port showing in MSM either. Its blank. Even after forcefully trying to boot EDL ( button combos ), it always boots back to same state.
Fixes i have tried : Reinstalled qualcomm drivers many times, also tried many other versions of MSM including the Hydrogen OS one. No solution.
Can anyone please help me with this situation. Its been few days now and i have really no hope left with the device.
Click to expand...
Click to collapse
complete noob here but I have heard someone said they fixed using indian msm tool, maybe I am wrong, idk
LR7875 said:
complete noob here but I have heard someone said they fixed using indian msm tool, maybe I am wrong, idk
Click to expand...
Click to collapse
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
alp47470 said:
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
Click to expand...
Click to collapse
does the computer even detect your device? what name of the device does it show up
alp47470 said:
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
Click to expand...
Click to collapse
1st, make sure your device is connected and recognized as 9008 HS-USB QDLoader.
2nd, try using MSM of 9R Ported ROM for 8T, it works in almost every situation
LinhBT said:
1st, make sure your device is connected and recognized as 9008 HS-USB QDLoader.
2nd, try using MSM of 9R Ported ROM for 8T, it works in almost every situation
Click to expand...
Click to collapse
The 1st one is main problem. It doesn't recognise as 9008 HS-USB QDLoader, it always keeps showing to 900E mode.
just a long shot, as i am on a 5t not the 8, but has windoze perhaps updated and "fixed" the usb driver on your behalf?
my 5t was invisible after unlocking, until i forced windoze to update the driver to an unsigned (working) version
[EOL][11.0][OFFICIAL] LineageOS 18.1 for Oneplus 5 & 5T
Is there anybody out there!đź¤
forum.xda-developers.com
alp47470 said:
The 1st one is main problem. It doesn't recognise as 9008 HS-USB QDLoader, it always keeps showing to 900E mode.
Click to expand...
Click to collapse
That's a total different device state, it's on Diag mode, not EDL mode. Try to turn off the device COMPLETELY, then either using hardkeys ( VOL + VOL - press and hold at the same time, plug in cable ) or use Deep-Fash cable to put the device into correct EDL 9008 mode.
So, guys i was finally able to fix the device by EDL point method. Somehow the device was able to boot to edl anyhow. The drivers were correct and so was the cable etc, Thank you all for still helping me.
So relieved so my 8T alive again.
alp47470 said:
So, guys i was finally able to fix the device by EDL point method. Somehow the device was able to boot to edl anyhow. The drivers were correct and so was the cable etc, Thank you all for still helping me.
So relieved so my 8T alive again.
Click to expand...
Click to collapse
Could you please be more specific as to how you got it to connect in EDL mode - it would help others who end up in the same situation.
BillGoss said:
Could you please be more specific as to how you got it to connect in EDL mode - it would help others who end up in the same situation.
Click to expand...
Click to collapse
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel, reboot
Thanks for sharing that - much appreciated.
alp47470 said:
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel.
Click to expand...
Click to collapse
So the localshop is using Testpoint trick. It has the same effect as using Deep-Flash cable but more trustable, only that u will have to open the back cover.
Congrats on successfully rescue the device mate
LinhBT said:
So the localshop is using Testpoint trick. It has the same effect as using Deep-Flash cable but more trustable, only that u will have to open the back cover.
Congrats on successfully rescue the device mate
Click to expand...
Click to collapse
Thanks bro. Actually the shop kepper didn't do anything. Instead he was saying that the battery was damaged or something (probably scamming me) or he actually didn't had any idea for real. I had read about EDL point thing, so i just asked the shopkeeper to just remove the back panel. Rest i came home and did everything lol. NGL it was scary as hell.
In the process i also discovered that 8T and 9R being mostly identical also have same EDL points on motherboard. Same positioning too.
alp47470 said:
Thanks bro. Actually the shop kepper didn't do anything. Instead he was saying that the battery was damaged or something (probably scamming me) or he actually didn't had any idea for real. I had read about EDL point thing, so i just asked the shopkeeper to just remove the back panel. Rest i came home and did everything lol. NGL it was scary as hell.
In the process i also discovered that 8T and 9R being mostly idenical also have same EDL points on motherboard. Same positioning too.
Click to expand...
Click to collapse
Ah I see, same here when I 1st try the Testpoint trick few years back, scary as hell cuz that was the only phone I had at that time ))))
Btw, yes, 9R and 8T shares almost everything besides of SOC's name ( Snap870 in fact is Snap865 OCing ). That's why I told u to use the MSM Tool of 9R port ROM for 8T, it passes almost every errors u may face when using MSM of 8T itself!
alp47470 said:
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel, reboot
Click to expand...
Click to collapse
Hi, I'm the same boat after a bad flash of OSS12, hard brick, black screen, not detected in Windows devices manager, no vibration with every button combination ...
Could you share where the edl points are on the OnePlus 8T motherboard please ?
I would be eternally grateful!
NZX-DeSiGN said:
Hi, I'm the same boat after a bad flash of OSS12, hard brick, black screen, not detected in Windows devices manager, no vibration with every button combination ...
Could you share where the edl points are on the OnePlus 8T motherboard please ?
I would be eternally grateful!
Click to expand...
Click to collapse
Here.. hope it helps
So i recently wanted to root my OOS 12 oneplus nord, and i bricked it..
i cant get into fastbootD, Recovery, or anything at all except fastboot, the device is detected as Android bootloader interface in device manager, i have tried using: msm tool, flashing normal rom (error: partition not found and Flashing is not allowed for critical partition)
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Azeld said:
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Click to expand...
Click to collapse
As I said, msm didn’t work for me
Hafted said:
As I said, msm didn’t work for me
Click to expand...
Click to collapse
may be need to reinstall drivers? should be displayed differently in the device manager than Android bootloader interface.
gorro8 said:
may be need to reinstall drivers?
Click to expand...
Click to collapse
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Hafted said:
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Click to expand...
Click to collapse
what do you do to enter the edl mode?
what cable are you using?
gorro8 said:
what do you do to enter the edl mode?
what cable are you using?
Click to expand...
Click to collapse
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
download the correct drivers and replace them in the device manager
gorro8 said:
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok, I’ll try that and give you an update, Ty!
worth trying another USB port too, even if they are supposed to be the exact same. Same thing happened with my laptop, tried another (presumably identical) USB port and it works first time, every time
Hafted said:
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
Click to expand...
Click to collapse
1st, u really should find the exact drivers. But also very important to remember booting your PC into Test Mode with Driver Signature Enforcement OFF - BEFORE installing the EDL 9008 Drivers for your device.
Besides, after you press and hold both Vol buttons, u should plug the device in IMMEDIATELY, not waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Hey, so after some time (I got a new phone by now) I managed to fix it, turns out that i had to instantly put in the cable, just like how LinhBT Said
LinhBT said:
waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Click to expand...
Click to collapse
Here is something that might work for unbricking and/or getting in to EDL-mode:
Unable to reinstall Oxygen OS from custom ROM. FAILED (remote: Flashing is not allowed for Critical Partitions ). Need assistance, details below.
Hello, friends. So I am here following this exact tutorial : https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ I currently am stuck there @pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$...
forum.xda-developers.com