I tried to unlock the oem/bootloader on my new OnePlus 7 pro (t-mobile unlocked sim) and managed to brick it pretty bad. When i plug it into the computer to try some kind of recovery its stuck in a loop where it connects and disconnects. I am unable to see it in adb. The drivers were working before so i don't think that's the issue. Any Ideas?
Boot into bootloader by using the buttons power+ vol down.
Then you can flash the rom
Or have you tried getting into recovery with power + vol up?
So you are getting the param preload error too with MSM Flash tool?
I saw your post in another thread just now
Kenora_I said:
So you are getting the param preload error too with MSM Flash tool?
I saw your post in another thread just now
Click to expand...
Click to collapse
i think i used the wrong MSM flash tool and that is what bricked my device. im going to try this guide right now: https://forum.xda-developers.com/t/msm-tool-guac-for-all.3934691/
Sure try it.
It can be the issue but if it doesn't work, ill be here to help anyway
Kenora_I said:
Sure try it.
It can be the issue but if it doesn't work, ill be here to help anyway
Click to expand...
Click to collapse
Thank you so much and for your quick response!
sudozeus said:
Thank you so much and for your quick response!
Click to expand...
Click to collapse
Anytime, im always here anyway
Related
Hello, everyone,
I've buy a mi4c for my sisters and it arrived with a multilanguange bad rom... so like with my other devices I try to change my rom, and I do a big error...
-I reboot to edl (with adb command) flash the fastboot rom with miflash , no error but now my phone stay black....
I find that here in an other topic : http://en.miui.com/thread-170110-1-1.html
Do you think that will work ? else do you have another solution ?
qualcomm driver is working but nothing else....
hold the power button for 8s
Try to use miflash to do that again.
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Sakura_Sa233 said:
Try to use miflash to do that again.
Click to expand...
Click to collapse
Retry same if my phone couldn't go to fastboot ?
jordandroid64 said:
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Retry same if my phone couldn't go to fastboot ?
Click to expand...
Click to collapse
Do you know 8009 mode？
Sakura_Sa233 said:
Do you know 8009 mode？
Click to expand...
Click to collapse
No, it's when the qualcomm driver appear ?
jordandroid64 said:
No, it's when the qualcomm driver appear ?
Click to expand...
Click to collapse
You can search it in Google .
Sakura_Sa233 said:
You can search it in Google .
Click to expand...
Click to collapse
I have seen this is mode which permit to repair a qualcomm device brick... But there are tutorials for device really complicated...
But i will try with miflash like you said
Hey,
I had reconnect it to reflash by miflash and now the led is blinking red but qualcomm driver diseappear
edit : MI4c work now ! thanks !
Please if someone can look out for the msmtool for 5G version
thanks
Any joy on getting this? My phone appears to be really bricked!
iang123 said:
Any joy on getting this? My phone appears to be really bricked!
Click to expand...
Click to collapse
Can you get into fastboot at all?
liam_davenport said:
Can you get into fastboot at all?
Click to expand...
Click to collapse
I could, but now it's just a blank screen and I keep getting "USB Device malfunctioned" I think it's done for
iang123 said:
I could, but now it's just a blank screen and I keep getting "USB Device malfunctioned" I think it's done for
Click to expand...
Click to collapse
Contact OnePlus they might be able to help you with a tool that can revive it.
liam_davenport said:
Contact OnePlus they might be able to help you with a tool that can revive it.
Click to expand...
Click to collapse
I can get into fastboot mode now. Can I do anything from here?
iang123 said:
I can get into fastboot mode now. Can I do anything from here?
Click to expand...
Click to collapse
Visit this thread: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Download the fastboot rom for your model and run the flash all bat
Hello,
I bought a used Moto G osprey, european version with 2GB of RAM.
It only boots into fastboot mode, normal boot or boot into recovery don't work. When I try to start the phone normally, it gets stuck at the "M" logo, restarts after a few seconds and does the same again. It's bootlooping.
What I already tried:
- Going back to stock according to https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750 throws a 'Preflash validation' error, probably because the installed system is a newer Android version
- Flashing TWRP 3.3.1-0 via fastboot works, but I can't seem to get into it after installation. When I try to get into recovery mode through the fastboot menu, I come back into the same bootloop.
Any help on what could be going wrong?
Can you see the phone using ADB Fastboost on a PC?
R1ffR4ff said:
Can you see the phone using ADB Fastboost on a PC?
Click to expand...
Click to collapse
No. It's really strange.
I have some experience with flashing, did some on a Galaxy S, S2, S5 and HTC One M7, but never encountered such an error.
Could it be an hardware failure? If so, how could I confirm this?
snowmotion said:
No. It's really strange.
I have some experience with flashing, did some on a Galaxy S, S2, S5 and HTC One M7, but never encountered such an error.
Could it be an hardware failure? If so, how could I confirm this?
Click to expand...
Click to collapse
I think only a Moto Service center could help but have you tried these Motorola USB drivers just in case?
https://support.motorola.com/us/en/drivers
R1ffR4ff said:
I think only a Moto Service center could help but have you tried these Motorola USB drivers just in case?
https://support.motorola.com/us/en/drivers
Click to expand...
Click to collapse
Well, I'm using Linux, so not using any drivers at all.
How do the Moto Service centers work if I do not have a guarantee?
snowmotion said:
Well, I'm using Linux, so not using any drivers at all.
How do the Moto Service centers work if I do not have a guarantee?
Click to expand...
Click to collapse
I don't know how they work just that they are there. Alternate idea.Phone around for a local small phone repair shop.They should be able to help and or borrow a Window's Laptop?
R1ffR4ff said:
I don't know how they work just that they are there. Alternate idea.Phone around for a local small phone repair shop.They should be able to help and or borrow a Window's Laptop?
Click to expand...
Click to collapse
Thanks for your tip, going to try that out and report back.
snowmotion said:
Thanks for your tip, going to try that out and report back.
Click to expand...
Click to collapse
I wrote a guide in a reply on how to recover from this in an XDA forum post located HERE.
I try all commands and procedure like volume+/- and power button all things but still screen is black and when i connect it to pc in manager it show me qualcomm 9008..
And when i flash it with msm tool oneplus 9 msm tool india it always show me error
Wrong suggestion, so I edited it out. Good luck unbricking
noname122414 said:
Wrong suggestion, so I edited it out. Good luck unbricking
Click to expand...
Click to collapse
How?
I saw in another post that you are aware of your chinese version. So you probably already tried flashing this version ( https://forum.xda-developers.com/t/official-oneplus-9-oxygen-to-color-and-back.4256457/ ) just patch the to Oxygen again on the chinese version.
How i can patch i told my phone is stuck in Edl mode hard brick
So no fastboot commands are working? Fastboot devices says nothing? Say what you tried, and your current situation in as much detail as possible. People can only help you when they understand what happened and what is still possible to do.
Brother my device is stuck in Edl mode because when i connect to pc it show me qualcomm 9008 in device manager..
I tried all Fastboot commands, power + , power - button & power button but nothing happened still device stuck in Edl mode and also msm tools of india doesn't work
Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.
Y
nujackk said:
Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.
Click to expand...
Click to collapse
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9
Wolverine619 said:
Y
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9
Click to expand...
Click to collapse
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.
nujackk said:
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.
Click to expand...
Click to collapse
Do you told me about solution?
My phone battery was 100% when it's stuck in Edl mode any idea for 100% to 0%?
Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash
nujackk said:
Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash
Click to expand...
Click to collapse
See brother
I see what you mean. Not sure what sahara error state is. Not sure you'll be able to fix that on your own. You may need to contact oneplus see if they can help. They tend to be willing to help in most cases. But may cost you since I'm sure this wouldn't be covered under warranty.
sahara error usually happens when you flash the wrong firmware.
noname122414 said:
sahara error usually happens when you flash the wrong firmware.
Click to expand...
Click to collapse
Can anyone tell me how to fix it?
Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.
noname122414 said:
Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.
Click to expand...
Click to collapse
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool
Wolverine619 said:
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool
Click to expand...
Click to collapse
"Payload dumper 64" can get the files for you that's an application there is also a python script which does the same.
I personally used "payload dumper 64" then flashed the files vis fastboot to recover 2 Chinese variant until now( you have to use the right rom which is normally used to switch from Chinese rom to Oxygen)
This is just how I recovered the phones.
Edit: sorry it's late you are probably looking for the msm download tool files, I probably messed things up
I have an extremely big problem, maybe someone could help me here?
So today I tried to flash diffrent OOS version on my OnePlus 9, I did it with fastboot, after the command "fastboot reboot fastboot" the screen on the phone went blank and there was a sound on the computer as if the phone was still connecting and disconnecting. Now, the phone does not respond to the buttons, the charger, I cannot enter the fastboot, only the EDL mode works, but I cannot use the MSM because it does not detect the phone, I get the "sahara communication failed" notification all the time, previously the same MSM version was working.
Probably the most important thing is that it turned out that the OOS I tried to flash was actually ColorOS, I didn't pay attention to it, I don't know how it happened.
I feel like an idiot, I'm afraid that I will not save this phone myself and that the repair service will also not accept it under warranty, any suggestions?
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com
Rayekk said:
I have an extremely big problem, maybe someone could help me here?
So today I tried to flash diffrent OOS version on my OnePlus 9, I did it with fastboot, after the command "fastboot reboot fastboot" the screen on the phone went blank and there was a sound on the computer as if the phone was still connecting and disconnecting. Now, the phone does not respond to the buttons, the charger, I cannot enter the fastboot, only the EDL mode works, but I cannot use the MSM because it does not detect the phone, I get the "sahara communication failed" notification all the time, previously the same MSM version was working.
Probably the most important thing is that it turned out that the OOS I tried to flash was actually ColorOS, I didn't pay attention to it, I don't know how it happened.
I feel like an idiot, I'm afraid that I will not save this phone myself and that the repair service will also not accept it under warranty, any suggestions?
Click to expand...
Click to collapse
See link below. Worked for me I was in same position.
ctonylee1965 said:
See link below. Worked for me I was in same position.
Click to expand...
Click to collapse
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Rayekk said:
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Click to expand...
Click to collapse
Make sure you look at the rest of the instructions to get back on global from Indian.
Rayekk said:
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Click to expand...
Click to collapse
Brother what is your phone model is it Chinese (Le2110)? or another model ?
bro i have the same issues , did u found any solution & can you help me plz
See if these steps work for you: (last post)
Display becomes unresponsive after OOS 12 update
I upgraded my OnePlus 9 LE2115 from OOS 11 to OOS 12, and every time the phone reboots after completing the update, the touch screen is completely unresponsive, so it stays stuck at the lock screen forever. I upgraded from OOS 11.2.10.10 to OOS...
forum.xda-developers.com
Hey, i have hardbricked my OnePlus 9 and now i have the connect and disconnect-problem in the EDL-Mode. My Model is a Lahaina and i hope it is the same like a Lemonade or a OnePlus 9. I was on the latest Android 12 for the OP 9 before it gets bricked. How i bricked my phone: First i have unlocked the Bootloader and after that i was trying to boot into TWRP. The bootscreen from TWRP comes and the screen gets black and then into boot dump mode. okay, then i installed this: https://forum.xda-developers.com/t/fastboot-rom-pc-required-op9-stock-oos-11-2-2-2aa.4275727/unread and the message <awaiting any device> shows up and i disconnected my phone. After that my phone just shows black and on the pc it just shows up the "QDLoader" (yes, the driver is installed) . How i could bring my phone back to life and fix the partitionproblem/connect & disconnect problem. The MSM just shows "Status of Connection: N/A" and "Waiting for device". I am using an Laptop with Windows 10 on it and an intel chipset.
I think i have killed the partitioning of the oneplus by downgrading from A 12 to A 11. Thanks for your help. By the way: I have downloaded the MSM with Indian OS and I have still the same problem.
I´ve got exactly the same situation and problem as DerBaLu841... Anything to do for now or is the OP9 finally hard bricked now..?
kischde said:
I´ve got exactly the same situation and problem as DerBaLu841... Anything to do for now or is the OP9 finally hard bricked now..?
Click to expand...
Click to collapse
Check this out:
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com
DerBaLu841 said:
Check this out:
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi! Have you telegram? Can I ask to you help with the method you posted?