Please if someone can look out for the msmtool for 5G version
thanks
Any joy on getting this? My phone appears to be really bricked!
iang123 said:
Any joy on getting this? My phone appears to be really bricked!
Click to expand...
Click to collapse
Can you get into fastboot at all?
liam_davenport said:
Can you get into fastboot at all?
Click to expand...
Click to collapse
I could, but now it's just a blank screen and I keep getting "USB Device malfunctioned" I think it's done for
iang123 said:
I could, but now it's just a blank screen and I keep getting "USB Device malfunctioned" I think it's done for
Click to expand...
Click to collapse
Contact OnePlus they might be able to help you with a tool that can revive it.
liam_davenport said:
Contact OnePlus they might be able to help you with a tool that can revive it.
Click to expand...
Click to collapse
I can get into fastboot mode now. Can I do anything from here?
iang123 said:
I can get into fastboot mode now. Can I do anything from here?
Click to expand...
Click to collapse
Visit this thread: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Download the fastboot rom for your model and run the flash all bat
Related
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
does download mode works @sarry86
mohsin931 said:
does download mode works @sarry86
Click to expand...
Click to collapse
Yes it does but stays for 3 or 4 seconds then it restarts
sarry86 said:
Yes it does but stays for 3 or 4 seconds then it restarts
Click to expand...
Click to collapse
flashing does not work in recovery?
mohsin931 said:
flashing does not work in recovery?
Click to expand...
Click to collapse
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
sarry86 said:
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
Click to expand...
Click to collapse
how did it happened?
mohsin931 said:
how did it happened?
Click to expand...
Click to collapse
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
sarry86 said:
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
Click to expand...
Click to collapse
it is hardbrick remove battery and connect to computer and tell me is it detected
mohsin931 said:
it is hardbrick remove battery and connect to computer and tell me is it detected
Click to expand...
Click to collapse
No nothing even in device manager
sarry86 said:
No nothing even in device manager
Click to expand...
Click to collapse
usb is not recognized did you got this message?
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
Nothing but sometimes i get the message "USB only charge interface"
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
mohsin931 said:
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
Click to expand...
Click to collapse
Thanks bro i will try tomorrow and will let you know
If u still face the problem toss a new battery and check it ....or grab a old Nokia battery or which ever battery fits positive and negative connection in the phone. If the phone turns on its your BATTERY...ORIGINAL G PRO 2 BATTERY COSTS AROUND 180$ DO NOT BUY CHINESE KNOCK OFF......INFORMATION IS MEDICINE :good:
---------- Post added at 09:52 AM ---------- Previous post was at 09:51 AM ----------
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
It's the battery problem even if the battery looks good toss a new one and check before doing all this stuffs
sarry86 said:
Thanks bro i will try tomorrow and will let you know
Click to expand...
Click to collapse
hello bro the problem u have now is u have custom recovery installed on your phone and u received ota update and the phone try to install the ota update so after that your phone cant boot ur phone the phone is bootloop . if that is the problem u have to install twrp recovery and go to terminal type this code dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota then after that reboot your phone. If i help u dont forget the thanks bottom :good:
Hello, everyone,
I've buy a mi4c for my sisters and it arrived with a multilanguange bad rom... so like with my other devices I try to change my rom, and I do a big error...
-I reboot to edl (with adb command) flash the fastboot rom with miflash , no error but now my phone stay black....
I find that here in an other topic : http://en.miui.com/thread-170110-1-1.html
Do you think that will work ? else do you have another solution ?
qualcomm driver is working but nothing else....
hold the power button for 8s
Try to use miflash to do that again.
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Sakura_Sa233 said:
Try to use miflash to do that again.
Click to expand...
Click to collapse
Retry same if my phone couldn't go to fastboot ?
jordandroid64 said:
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Retry same if my phone couldn't go to fastboot ?
Click to expand...
Click to collapse
Do you know 8009 mode？
Sakura_Sa233 said:
Do you know 8009 mode？
Click to expand...
Click to collapse
No, it's when the qualcomm driver appear ?
jordandroid64 said:
No, it's when the qualcomm driver appear ?
Click to expand...
Click to collapse
You can search it in Google .
Sakura_Sa233 said:
You can search it in Google .
Click to expand...
Click to collapse
I have seen this is mode which permit to repair a qualcomm device brick... But there are tutorials for device really complicated...
But i will try with miflash like you said
Hey,
I had reconnect it to reflash by miflash and now the led is blinking red but qualcomm driver diseappear
edit : MI4c work now ! thanks !
Hello,
I bought a used Moto G osprey, european version with 2GB of RAM.
It only boots into fastboot mode, normal boot or boot into recovery don't work. When I try to start the phone normally, it gets stuck at the "M" logo, restarts after a few seconds and does the same again. It's bootlooping.
What I already tried:
- Going back to stock according to https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750 throws a 'Preflash validation' error, probably because the installed system is a newer Android version
- Flashing TWRP 3.3.1-0 via fastboot works, but I can't seem to get into it after installation. When I try to get into recovery mode through the fastboot menu, I come back into the same bootloop.
Any help on what could be going wrong?
Can you see the phone using ADB Fastboost on a PC?
R1ffR4ff said:
Can you see the phone using ADB Fastboost on a PC?
Click to expand...
Click to collapse
No. It's really strange.
I have some experience with flashing, did some on a Galaxy S, S2, S5 and HTC One M7, but never encountered such an error.
Could it be an hardware failure? If so, how could I confirm this?
snowmotion said:
No. It's really strange.
I have some experience with flashing, did some on a Galaxy S, S2, S5 and HTC One M7, but never encountered such an error.
Could it be an hardware failure? If so, how could I confirm this?
Click to expand...
Click to collapse
I think only a Moto Service center could help but have you tried these Motorola USB drivers just in case?
https://support.motorola.com/us/en/drivers
R1ffR4ff said:
I think only a Moto Service center could help but have you tried these Motorola USB drivers just in case?
https://support.motorola.com/us/en/drivers
Click to expand...
Click to collapse
Well, I'm using Linux, so not using any drivers at all.
How do the Moto Service centers work if I do not have a guarantee?
snowmotion said:
Well, I'm using Linux, so not using any drivers at all.
How do the Moto Service centers work if I do not have a guarantee?
Click to expand...
Click to collapse
I don't know how they work just that they are there. Alternate idea.Phone around for a local small phone repair shop.They should be able to help and or borrow a Window's Laptop?
R1ffR4ff said:
I don't know how they work just that they are there. Alternate idea.Phone around for a local small phone repair shop.They should be able to help and or borrow a Window's Laptop?
Click to expand...
Click to collapse
Thanks for your tip, going to try that out and report back.
snowmotion said:
Thanks for your tip, going to try that out and report back.
Click to expand...
Click to collapse
I wrote a guide in a reply on how to recover from this in an XDA forum post located HERE.
I try all commands and procedure like volume+/- and power button all things but still screen is black and when i connect it to pc in manager it show me qualcomm 9008..
And when i flash it with msm tool oneplus 9 msm tool india it always show me error
Wrong suggestion, so I edited it out. Good luck unbricking
noname122414 said:
Wrong suggestion, so I edited it out. Good luck unbricking
Click to expand...
Click to collapse
How?
I saw in another post that you are aware of your chinese version. So you probably already tried flashing this version ( https://forum.xda-developers.com/t/official-oneplus-9-oxygen-to-color-and-back.4256457/ ) just patch the to Oxygen again on the chinese version.
How i can patch i told my phone is stuck in Edl mode hard brick
So no fastboot commands are working? Fastboot devices says nothing? Say what you tried, and your current situation in as much detail as possible. People can only help you when they understand what happened and what is still possible to do.
Brother my device is stuck in Edl mode because when i connect to pc it show me qualcomm 9008 in device manager..
I tried all Fastboot commands, power + , power - button & power button but nothing happened still device stuck in Edl mode and also msm tools of india doesn't work
Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.
Y
nujackk said:
Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.
Click to expand...
Click to collapse
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9
Wolverine619 said:
Y
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9
Click to expand...
Click to collapse
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.
nujackk said:
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.
Click to expand...
Click to collapse
Do you told me about solution?
My phone battery was 100% when it's stuck in Edl mode any idea for 100% to 0%?
Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash
nujackk said:
Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash
Click to expand...
Click to collapse
See brother
I see what you mean. Not sure what sahara error state is. Not sure you'll be able to fix that on your own. You may need to contact oneplus see if they can help. They tend to be willing to help in most cases. But may cost you since I'm sure this wouldn't be covered under warranty.
sahara error usually happens when you flash the wrong firmware.
noname122414 said:
sahara error usually happens when you flash the wrong firmware.
Click to expand...
Click to collapse
Can anyone tell me how to fix it?
Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.
noname122414 said:
Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.
Click to expand...
Click to collapse
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool
Wolverine619 said:
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool
Click to expand...
Click to collapse
"Payload dumper 64" can get the files for you that's an application there is also a python script which does the same.
I personally used "payload dumper 64" then flashed the files vis fastboot to recover 2 Chinese variant until now( you have to use the right rom which is normally used to switch from Chinese rom to Oxygen)
This is just how I recovered the phones.
Edit: sorry it's late you are probably looking for the msm download tool files, I probably messed things up
I tried to unlock the oem/bootloader on my new OnePlus 7 pro (t-mobile unlocked sim) and managed to brick it pretty bad. When i plug it into the computer to try some kind of recovery its stuck in a loop where it connects and disconnects. I am unable to see it in adb. The drivers were working before so i don't think that's the issue. Any Ideas?
Boot into bootloader by using the buttons power+ vol down.
Then you can flash the rom
Or have you tried getting into recovery with power + vol up?
So you are getting the param preload error too with MSM Flash tool?
I saw your post in another thread just now
Kenora_I said:
So you are getting the param preload error too with MSM Flash tool?
I saw your post in another thread just now
Click to expand...
Click to collapse
i think i used the wrong MSM flash tool and that is what bricked my device. im going to try this guide right now: https://forum.xda-developers.com/t/msm-tool-guac-for-all.3934691/
Sure try it.
It can be the issue but if it doesn't work, ill be here to help anyway
Kenora_I said:
Sure try it.
It can be the issue but if it doesn't work, ill be here to help anyway
Click to expand...
Click to collapse
Thank you so much and for your quick response!
sudozeus said:
Thank you so much and for your quick response!
Click to expand...
Click to collapse
Anytime, im always here anyway