Database Info

Stering wheel and canbus informations

Hello i have 2 questions
1. Is possible to display on device informations from canbus? In my device I have canbus decoder like a:
https://cdn-images.xda-developers.c.../3/Canbus_Decoder_that_came_with_the_Unit.jpg
2. Is possible to use stering wheel in other apps than stock?

im interested in this as well. i have a 2016 mustang with MTCD_JY_V1.49_2 (Joying5.1) and want to do what you are asking. Got it from the US seller from Joying.
Mind if i ask where you got the can bus decoder and how it would connect?
Thanks

@jekyllrider I have canbus decoder in my device in standard.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In Joying You cant control custom apps from wheel yes?

You can't control custom apps with steering wheel only built in music app allows to switch to next song

pitu120 said:
Hello i have 2 questions
1. Is possible to display on device informations from canbus? In my device I have canbus decoder like a:
https://cdn-images.xda-developers.c.../3/Canbus_Decoder_that_came_with_the_Unit.jpg
Click to expand...
Click to collapse
This depend of your canbus decoder, in head unit factory settings / canbus, you can chose the type of canbus decoder, (this depend of your car model) some even let you control A/C and some setting of the car from the head unit, so the head unit it's capable but depend on the canbus decoder. For example for my VW head unit I can see Speed, RPM, Odometer, outside temp, fuel, battery volt, etc. but I can't control anything.

hugovw1976 said:
This depend of your canbus decoder, in head unit factory settings / canbus, you can chose the type of canbus decoder, (this depend of your car model) some even let you control A/C and some setting of the car from the head unit, so the head unit it's capable but depend on the canbus decoder. For example for my VW head unit I can see Speed, RPM, Odometer, outside temp, fuel, battery volt, etc. but I can't control anything.
Click to expand...
Click to collapse
Would you be able to share the APK for that app? my unit came with one called vehicle info that shows some details but it says oil where fuel should be and the door/trunk open doesn't work.

raptor_demon said:
Would you be able to share the APK for that app? my unit came with one called vehicle info that shows some details but it says oil where fuel should be and the door/trunk open doesn't work.
Click to expand...
Click to collapse
What car do you have? And what canbus decoder? My unit have the same vehicle info apk and show oil instead of fuel but this is only a translation error of the programmer and should be easy to mode.
Right now I don't have the stock apk I need to check on my home computer for the stock apk science I run a mode apk to match my car.

hugovw1976 said:
What car do you have? And what canbus decoder? My unit have the same vehicle info apk and show oil instead of fuel but this is only a translation error of the programmer and should be easy to mode.
Right now I don't have the stock apk I need to check on my home computer for the stock apk science I run a mode apk to match my car.
Click to expand...
Click to collapse
its a mk5 VW jetta se 2009. im not sure what canbus unit i have or how to tell. it came with the android unit i bought off amazon..... it looks similar to the red on a few posts up except it was black.
id love to be able to change the pic like you did, how did you do that?

raptor_demon said:
its a mk5 VW jetta se 2009. im not sure what canbus unit i have or how to tell. it came with the android unit i bought off amazon.....
id love to be able to change the pic like you did, how did you do that?
Click to expand...
Click to collapse
It's rare that doors info don't work science all other information show correctly maybe a faulty canbus decoder. I upload a picture of my decoder.
For the apk modifications I decompile the apk and mode in android studio. For canbus apk and for Vehicle info apk I made changes direct on the unit with apk editor (you can download from play store).

hugovw1976 said:
It's rare that doors info don't work science all other information show correctly maybe a faulty canbus decoder. I upload a picture of my decoder.
For the apk modifications I decompile the apk and mode in android studio. For canbus apk and for Vehicle info apk I made changes direct on the unit with apk editor (you can download from play store).
Click to expand...
Click to collapse
I'll take a look, thanks.
edit: i found the apk, thanks
and i found the can bus decoder i have: its an RZ-07.
the door settings do not work and neither do the right hand set of buttons on the steering wheel, the left 4 work.
any ideas?

raptor_demon said:
I'll take a look, thanks.
edit: i found the apk, thanks
and i found the can bus decoder i have: its an RZ-07.
the door settings do not work and neither do the right hand set of buttons on the steering wheel, the left 4 work.
any ideas?
Click to expand...
Click to collapse
In the head unit settings do you test other canbus settings? I can't remember exactly how many for VW but I think at least 3 different.

hugovw1976 said:
In the head unit settings do you test other canbus settings? I can't remember exactly how many for VW but I think at least 3 different.
Click to expand...
Click to collapse
yea, i went through and tested all the VW and Audi options the original one worked best.

tittn said:
You can't control custom apps with steering wheel only built in music app allows to switch to next song
Click to expand...
Click to collapse
Not true... I can control poweramp
---------- Post added at 04:45 PM ---------- Previous post was at 04:42 PM ----------
hugovw1976 said:
What car do you have? And what canbus decoder? My unit have the same vehicle info apk and show oil instead of fuel but this is only a translation error of the programmer and should be easy to mode.
Right now I don't have the stock apk I need to check on my home computer for the stock apk science I run a mode apk to match my car.
Click to expand...
Click to collapse
Hi I am curious how you got this information.. Is it via a special app? Or did you edit vehicleinfo.apk?

raptor_demon said:
yea, i went through and tested all the VW and Audi options the original one worked best.
Click to expand...
Click to collapse
Ok, if door information don't work I believe it's a canbus decoder trouble.
---------- Post added at 02:44 AM ---------- Previous post was at 02:32 AM ----------
dayanandgp said:
Not true... I can control poweramp
---------- Post added at 04:45 PM ---------- Previous post was at 04:42 PM ----------
Hi I am curious how you got this information.. Is it via a special app? Or did you edit vehicleinfo.apk?
Click to expand...
Click to collapse
I mode canbus apk and vehicleinfo apk just for the pictures of the car that originally show but the information it's the same from original apps. This apps work with the canbus decoder information received from the car ( in this case from canbus line of VW) I install this unit on a old VW bug and I replicate original messages ( from VW) and send information with teensy 3.1

Can someone please send me the vehicle info apk?

i mode canbus apk and vehicleinfo apk just for the pictures of the car that originally show but the information it's the same from original apps. This apps work with the canbus decoder information received from the car ( in this case from canbus line of VW) I install this unit on a old VW bug and I replicate original messages ( from VW) and send information with teensy 3.1
Click to expand...
Click to collapse
Hi hugovw1976,
ould you have a tutorial to do that?
Thanks

Question Change firmware or canbus?

Hello, guys I'm new at this and I got a Ekiy T7 9 inch for my Peugeot 508 2013, the wheel controls worked, but in many ways it failed, I tried to work it out with the seller but no luck, I'm really disappointed, but maybe you could help me out.
I'm disappointed because you cannot configure as I've seen in other canbus settings, camera resolution and all the stuff to switch from reverse to front camera.
So here is my question, that can be done by changing the canbus or the firmware, to get all the options?
I've seen other moldels of canbus according to they site are compatible with my peugeot.
I attached pics of muy specs and menu,
PLEASE HELP, I can't afford to send it back or buy a new one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Never got around to hooking up my canbus decoder (no factory wires on the radio harness), but I've read it's common to need to adjust the baudrate to get the headunit to recognize the decoder. Have you tried this? Which decoder is selected currently in factory settings?

ziddey said:
Never got around to hooking up my canbus decoder (no factory wires on the radio harness), but I've read it's common to need to adjust the baudrate to get the headunit to recognize the decoder. Have you tried this? Which decoder is selected currently in factory settings?
Click to expand...
Click to collapse
Hi, thanks for the response, I selected my car a Peugeot 508, ir has the option of RCZ and 2019, chose 2019 due works better..
But still missing options and for example I saw some vids that the car reverse original sound, the beep, works in this unit doesn't, what I was planning if I find which canbus they have, install that one, if that doesn't brick the unit and maybe I can get all the options for the canbus.

But I want to be sure, if that doesn't brick the unit or i have the desired result.

ElShaman said:
But I want to be sure, if that doesn't brick the unit or i have the desired result.
Click to expand...
Click to collapse
Changing the CANbus decoder will not brick your unit. Check with your reseller whether he send you the correct decoder.
Replacing your FYT firmware with other FYT firmware will probably not brick your unit either, but might work not as good as you do need some minor tweaks to adjust it for your specific unit.
But first check with your reseller whether he sent you the correct decoder

surfer63 said:
Changing the CANbus decoder will not brick your unit. Check with your reseller whether he send you the correct decoder.
Replacing your FYT firmware with other FYT firmware will probably not brick your unit either, but might work not as good as you do need some minor tweaks to adjust it for your specific unit.
But first check with your reseller whether he sent you the correct decoder
Click to expand...
Click to collapse
Ok,
I talked last night, my time with some canbus sellers, they told me it was not probably a decoder problem.
As far as I could find is the same decoders that normally uses other radios, seems that the factory settings menu is not full developed by the seller engineer department or developer team or manufacturer, so is missing options and features, to be called. Mine is PSA-RZ-69 others are 15, it seems is newer by the date is set in it.
Don't know if I can just change that menu? and I'm not an expert of firmware changing or tweaking, more programing...I'm good following instructions and technology, if is not too complicated I could try, just changing that ROM..
After I open a dispute te seller agreed to show to the department of engineers, some vids of other units that has it and are similar to mine...and try to solve the issues I presented to him.
For me, the biggest issues is that I cannot setup the front camera for it to swap after I disengage the reverse gear, also it doesn't show the lines, also that I lost the original car beeping sound of the sensors through the car spearkers, that I see it works with almost the same canbus decoder in other radios...
My best bet is software related...I'll keep posted if the seller resolves the issue...

I have another question, I can change the BT app of the radio, only that, for a better one? that accept split screen?

ElShaman said:
Ok,
I talked last night, my time with some canbus sellers, they told me it was not probably a decoder problem.
As far as I could find is the same decoders that normally uses other radios, seems that the factory settings menu is not full developed by the seller engineer department or developer team or manufacturer, so is missing options and features, to be called. Mine is PSA-RZ-69 others are 15, it seems is newer by the date is set in it.
Don't know if I can just change that menu? and I'm not an expert of firmware changing or tweaking, more programing...I'm good following instructions and technology, if is not too complicated I could try, just changing that ROM..
After I open a dispute te seller agreed to show to the department of engineers, some vids of other units that has it and are similar to mine...and try to solve the issues I presented to him.
For me, the biggest issues is that I cannot setup the front camera for it to swap after I disengage the reverse gear, also it doesn't show the lines, also that I lost the original car beeping sound of the sensors through the car spearkers, that I see it works with almost the same canbus decoder in other radios...
My best bet is software related...I'll keep posted if the seller resolves the issue...
Click to expand...
Click to collapse
What is the result of this dispute?

Question Ford C-Max Android Unit - My Feedback and help request

Hi everyone,
so i've bought a new android unit for my car. I have been checking the other posts in this forum but they are kind of "pro level" so i felt the need to clarify some doubts. I know you guys are experts, if you can help be i would be thankful. I'll also provide some feedback that maybe can help people who are considering buying it.
The unit i've bought is this one:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link for it: https://www.aliexpress.com/item/1005003003858975.html?spm=a2g0o.9042311.0.0.27424c4ds0To05
I have a Ford Grand C-Max manufactured 11/2015 (the restyled one), and i thought this radio would be a good fit (i've had other android units in my past cars). I bought the 6G+128GB version (TS6 version), with Android 11. The brand is "Navifly", however i guess this is just another brand variation.
1) Feedback​
Positive​- Fast and fluid Android experience - no lag to complain about.
- Sound Quality - a great improvement over the Ford Sync 2 original radio - better definition, better bass, supports higher volumes without distortion
- Radio has RDS - it actually shows the station name (we don't have DAB in Portugal, it is still FM) and the tuning quality is good
- GPS is ok. Not awesome, but usable. Supposedly, it also gets some Glonass satellites, but as you know Glonass constellation is sparser, so it usually only gets GPS triangulation. I use Waze, sometimes it takes a bit to understand where it is.
Negative​- Quality of design and build of the plastic fairings: the plastic fairings are much lower quality relatively to the Ford ones. They don't precisely fit the car dashboard, by a couple of milimiters. I have it provisionally installed, but i'll have to shave some plastic when i get it definitely installed. Additionaly, the chines fairings don't have the metal clips/retainers that the original plastics have to get it securely in place. I've has to order some to get this sorted out...
- The CANBUS communication:
-> i am not getting any steering wheel communication at all (no volume control, no call pick up. This is the worst part for me
-> the information of the parking sensors is erratic. My car has 6 sensors at the front and 6 at the back (360º coverage) and there is quite an error on the info shown in this android unit, so i am not not trusting it a lot. Besides that, it is slow to react (couple of seconds), and the car should be drawn vertically (you brain needs to rotate the view 90º to get it right).
-> No Park Assist (automated parking) information is shown at the unit, so the Park assist is not currently working
-> I can get reversal signal, climate info (when i change it), and open door information.
- The screen. For its size, its low resolution, not bright enough, and it is very reflective. Not very happy with it.
​2) Help Request​I need help to sort the CANBUS limitations. This is the canbus box they sent me:
I guess this box is not the most adequate for my C-Max. I can't read chinese characters so i really don't know what it says at all. I've tried to get into the canbus box definitions in the settings menu and have tried selecting other canbus choices with no avail: i couldn't get steering wheel info at all. So i've went a bit overkill and ordered two canbus boxes to see if a different canbus box solve my issues. I've ordered these two:
- Another Hiworld box (i guess this is a newer version than the one i have, so i hope they have sorted out the issues) https://www.aliexpress.com/item/1005002718903038.html?spm=a2g0o.9042311.0.0.27424c4dac8EZc
- An XP one: https://www.aliexpress.com/item/1005002327630203.html?spm=a2g0o.9042311.0.0.27424c4dac8EZc
So i now have three questions for you guys:
1) Is this a FYT unit? Or a Mekede?
2) Will any of the new boxes sort out my canbus miscommunication?
3) Is there any place where i can get a firmware update? Or canbus firmware update? This is what the Android System settings show about my unit:
Thank you guys in advance for your help!!

I have tried other two canbus boxes from Hiworld and XP, with no avail. Still no steering wheel controls. Any suggestions?

JMourinho said:
I have tried other two canbus boxes from Hiworld and XP, with no avail. Still no steering wheel controls. Any suggestions?
Click to expand...
Click to collapse
What does reseller suggest when contacted for support.

JMourinho said:
So i now have three questions for you guys:
1) Is this a FYT unit? Or a Mekede?
2) Will any of the new boxes sort out my canbus miscommunication?
3) Is there any place where i can get a firmware update? Or canbus firmware update? This is what the Android System settings show about my unit:
Click to expand...
Click to collapse
Hi,
1) Mekede = FYT, not every FYT is a Mekede. But your unit is a Topways built unit sold by reseller TopNavi, so neither a Mekede nor a FYT nor a NaviFly. You are in the wrong sub-forum. Please ask in the general Android Head Units subforum
2) Ask your reseller TopNavi.
3) Please ask your TopNavi reseller or in the general Android Head Units subforum. There your will find the TSx series with firmwares and other information.
And by the way: It is a fake Android 11. It is still Android 10 (Api/SDK 29) as displayed on the web page. One can write a script that will set the "Android level" to any version you like: Android 10, 11, 31, 451, 10961, 4, ..
But it is a nice looking unit compared with the standard Ford units.
EDIT: This seems to be a FYT after all. Sorry for the confusion.
In my signature you find on the 3rd line the "HWGetInfo.apk". Please run it and share the created zip file.

Question TEYES CC2 2k - Bluetooth not working (to my phone) - RESOLVED

I've read through a few threads around obd connection issues and such, but this is just generally using Bluetooth to connect to my phone via the Bluetooth app.
The Bluetooth app doesn't seem to save any inputs for name or password, i tried the reset button but that just comes up with "reset unsuccessful"?
Also tried clearing storage under the app, that didnt help
Unsure what to try next?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

lynx_nz said:
I've read through a few threads around obd connection issues and such, but this is just generally using Bluetooth to connect to my phone via the Bluetooth app.
The Bluetooth app doesn't seem to save any inputs for name or password, i tried the reset button but that just comes up with "reset unsuccessful"?
Also tried clearing storage under the app, that didnt help
Unsure what to try next?
Click to expand...
Click to collapse
Device name will be the name of your phone head unit when scanning detects your phone...set phone bluetooth to scan, set head unit to scan (slide down at top of screen to make sure bluetooth is toggled on then enable BT scanning....the Device field should auto populate with phone name detected while scanning....password is 0000....that also should auto populate

thanks for the response, i tried all kinds of combinations to pair the phone with the headunit. Including other phones. Even the TEYES OBD2 device is never found.
Also, i think those settings are to do with the headunit and not already paired devices. I've seen a few other videos where these fields have TEYES and 0000 predefined. This TEYES video has it called CARKIT
I've tried a few more things;
factory reset (from settings -> user -> backup and reset)
removing and re-plugging in the cabling with Bluetooth antenna
Still no luck, stuck scanning with nothing showing up... (even TEYES OBD2 devices doesn't show)
Is this normal ?

ok, so i think it is resolved... what i did;
followed instructions here, assuming this is a hard reset - https://teyes.co.nz/pages/cc3-2k-april-2023-29-04-2023?shpxid=23b36055-992d-4ddd-8fba-327143c7af43
obtained latest firmware for CC2 2K
modified config.txt updating sys.fyt.bluetooth_type=0
inserted usb stick, let the update run
fixed, bluetooth working again - headunit is named TEYES, code 0000

one more note, i have heard from another user that pressing the "Reset Bluetooth" button in the Bluetooth app as seen above can actually cause the problem. The only recovery is a full re-flash as above.

lynx_nz said:
one more note, i have heard from another user that pressing the "Reset Bluetooth" button in the Bluetooth app as seen above can actually cause the problem. The only recovery is a full re-flash as above.
Click to expand...
Click to collapse
You can actually just have that line in the config txt file and it will reset the blue tooth without factory reset or reloading firmware.
I’ve just done it.

I just wanted to say thank you for posting this solution! I had the exact same issue and was able to fix it by adding that single line in the config.txt and doing a config-only flash since I'm not rooted.

lynx_nz said:
ok, so i think it is resolved... what i did;
modified config.txt updating sys.fyt.bluetooth_type=0
Click to expand...
Click to collapse
ponkotsu67 said:
I just wanted to say thank you for posting this solution! I had the exact same issue and was able to fix it by adding that single line in the config.txt and doing a config-only flash since I'm not rooted.
Click to expand...
Click to collapse
What number did you both replace with a zero?
Most of the older FYT devices (including the older Teyes) used sys.fyt.bluetooth_type=1 and this could be changed to sys.fyt.bluetooth_type=0
The newer devices seem to use sys.fyt.bluetooth_type=7, or sys.fyt.bluetooth_type=0
I'm wondering if your newer units were set to 1 by mistake. It's odd that the included Teyes odb wouldn't even connect.

j0hn83 said:
What number did you both replace with a zero?
Click to expand...
Click to collapse
I wasn't able to check on my actual unit before flashing and the latest firmware update config.txt file didn't have that line at all so I added it myself.
In this older firmware update from October 2022, the number seems to be set to 1 so I assume that was the value on my unit when the issue happened. (forgot to mention, I have just the regular CC3)
Is there any documentation that might explain what bluetooth_type 0, 1, or 7 might mean?

ponkotsu67 said:
Is there any documentation that might explain what bluetooth_type 0, 1, or 7 might mean?
Click to expand...
Click to collapse
It's my belief that 0 uses the Bluetooth module built in to our Unisoc chipsets.
1 uses an additional Bluetooth module installed on our motherboards and 7 uses a newer Bluetooth module on the newer motherboard's (like the CC3 2K and Mekede M6 Pro).
So for your older cc3 you can use 0 or 1 and the newer units can use 0 or 7

double post, sorry !

Hi ! I have the same problem just 3 days after installation...
There is solution without full re installation ?
Or it s possible to modify the text file directly from the unit?
Thanks a lot !
CC3 2k 3+32gb

Scoty42 said:
You can actually just have that line in the config txt file and it will reset the blue tooth without factory reset or reloading firmware.
I’ve just done it.
Click to expand...
Click to collapse
Hi!
Could you give the steps ?
Thanks a lot !

Question Carplay Resolution Problem

My device had AC controller APP and I wanted to disable it. and I disabled it by applying the patch on the topic in the link below.
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Currently, parts such as volume up on the bottom of the screen have turned into buttons like in old android phones, but now when I exit the Carplay application, the resolution is broken. I have to close the app and open it again. What's the problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I've attached a video showing the exact problem.
When I open the carplay while the navibar is open, the carplay size remains as it is, and when I close the navibar, it does not return to its old resolution..
I have to close the app and enter the app while the navibar is hidden.
2023-05-22 13.46 (online-video-cutter.com)
Watch "2023-05-22 13.46 (online-video-cutter.com)" on Streamable.
streamable.com

First of all: I have no clue about the solution (or actually resolution ).
Secondly: You call it Carplay (or Android Auto for Android), but it is not Carplay and neither Android Auto.
It is carlink, which is a reverse engineered apk to try to "clone" the functionality of carplay and AA as good as possible. Obviously that does not always work correctly and is still less stable than real, actual Carplay or AA.
I think that in some months time, the Chinese have reverse engineered this as well for Tesla screens for Carplay and AA and then it might work correctly.
Same happened with wireless carplay, followed by wireless AA. It needs time.

surfer63 said:
First of all: I have no clue about the solution (or actually resolution ).
Secondly: You call it Carplay (or Android Auto for Android), but it is not Carplay and neither Android Auto.
It is carlink, which is a reverse engineered apk to try to "clone" the functionality of carplay and AA as good as possible. Obviously that does not always work correctly and is still less stable than real, actual Carplay or AA.
I think that in some months time, the Chinese have reverse engineered this as well for Tesla screens for Carplay and AA and then it might work correctly.
Same happened with wireless carplay, followed by wireless AA. It needs time.
Click to expand...
Click to collapse
Why are you so offensive?
I just asked a question yesterday because I don't know. I am not as knowledgeable about these issues as you and I asked because I was curious, but you thought that I was accusing you that you did not know.

thericksizzler said:
Why are you so offensive?
I just asked a question yesterday because I don't know. I am not as knowledgeable about these issues as you and I asked because I was curious, but you thought that I was accusing you that you did not know.
Click to expand...
Click to collapse
I think you need to read his post again. There's nothing offensive in surfer63's reply. It's a helpful, honest post.
He just explained it isn't official carlink or Android Auto. The Chinese reverse engineered it and they haven't make it fully compatible with your particular resolution and orientation.
Until the Chinese developers update it there will be nothing you can do except remember to keep the navibar hidden.
This will also effect Android Auto on vertical displays as they come from the same apk.

thericksizzler said:
Why are you so offensive?
I just asked a question yesterday because I don't know. I am not as knowledgeable about these issues as you and I asked because I was curious, but you thought that I was accusing you that you did not know.
Click to expand...
Click to collapse
To add to @j0hn83's answer: it is certainly not offensive or meant like that in any way.
I just try to give a informative answer. Maybe not the one you were hoping for, but that is simply the situation.

j0hn83 said:
I think you need to read his post again. There's nothing offensive in surfer63's reply. It's a helpful, honest post.
He just explained it isn't official carlink or Android Auto. The Chinese reverse engineered it and they haven't make it fully compatible with your particular resolution and orientation.
Until the Chinese developers update it there will be nothing you can do except remember to keep the navibar hidden.
This will also effect Android Auto on vertical displays as they come from the same apk.
Click to expand...
Click to collapse
"First of all: I have no clue about the solution (or actually resolution )."
I wrote that comment for this part. Because i asked something yesterday and i asked What does the problem and the microphone have to do with it?
But I think he misunderstood. Maybe it's because of me. because my english is not very good. I can't say that I express myself very well.

thericksizzler said:
"First of all: I have no clue about the solution (or actually resolution )."
I wrote that comment for this part. Because i asked something yesterday and i asked What does the problem and the microphone have to do with it?
But I think he misunderstood. Maybe it's because of me. because my english is not very good. I can't say that I express myself very well.
Click to expand...
Click to collapse
This is my last answer to this topic.
That remark has nothing to do with your question Yesterday, but directly to your question in this thread.
Secondly: I have answered numerous questions from you and provided you with more than one patch.
And you blame me of being offensive?

surfer63 said:
This is my last answer to this topic.
That remark has nothing to do with your question Yesterday, but directly to your question in this thread.
Secondly: I have answered numerous questions from you and provided yourwith more than one patch.
And you blame me of being offensive?
Click to expand...
Click to collapse
not to blame. I just think you misunderstood me. That's why I wrote it like this. Sorry if I misunderstood.