Database Info

Note radio messed up phone HELP!!

So earlier today i Dl'ed the new radio and its been down here from there.
I was able to get to odin before and i installed
http://forum.xda-developers.com/showthread.php?t=1601483
And i now cant use odin. I found from this thread what to do if i could get into odin (also cant get cwm)
http://forum.xda-developers.com/showthread.php?t=1611796
What should i do?

Does your phone work at all? It sounds like you might have bricked it using ODIN incorrectly. Did you leave "repartition" checked? If so, you shouldn't have.
Can you get into download mode at all? Does your PC recognize your phone? If you don't know what I'm talking about, you need to go to the "DEV" section and read all of the sticky threads, which you hopefully already did before you tried to do anything with your phone. Asking a bunch of questions about things you haven't taken the time to read about isn't going to help you at all.
Have you tried the "Odin Oneclick" leak"s" that have been released? They include ODIN in the install package.
You claim the Note radio flash derped your phone? It has been known to mess with phones but I haven't known of it bricking any phones. If so, have you tried to flash a different radio? You need to provide as much info as you can about what you did and read all of the threads that pertain to what it is you think you wanted to do. If you provide more acurate info, maybe someone can help (if you didn't brick your phone with ODIN). Good luck.

actually my phones all fixed now i did alot of research and fixed it
Thanks anyways
Correction im trying to get the lock screen/ power off menu solution thats all i need atm

Dwolf16 said:
actually my phones all fixed now i did alot of research and fixed it
Thanks anyways
Correction im trying to get the lock screen/ power off menu solution thats all i need atm
Click to expand...
Click to collapse
I'm happy to hear you are back up and running. I think the best thing to do is just stay away from the "Note" radio...its just not worth the risk.

scott14719 said:
I'm happy to hear you are back up and running. I think the best thing to do is just stay away from the "Note" radio...its just not worth the risk.
Click to expand...
Click to collapse
Are you sure you didn't mean to say "it's just note worth the risk. " XDDDDDDD
~PsyCl0ne
Sent from my SAMSUNG-SGH-I727 using XDA

its really not...im still trying to fix my homescreen and shutdown

I'm learning a hard lesson about the Note radio, too.

i just need to find some one with a full efs folder so i cant replace mine and ill be fine

I've updated my method, try again. If ur having write issues with efs, no guarantee that simply dropping it I'm with fix it. I think this new method will allow it to stick

Stuck in boot loop after repartitioning.

Hi,
I was having wifi issues after flashing multiple stock roms, and kernels. So, in a fit, I decided to repartition and start fresh. I know, it wasn't my brightest moment. Any way, the thing is, all the roms that I have, comes with only the pda file.
Now, I need any stock firmware with modem and csc files, so that I can get my phone back. Any firmware that comes with these two files will do. I can't download multiple firmware to check as my connection speed is 256 kbps only. I would prefer if someone can help me get these files.
Also, if someone can tell me, whether I will need a new bootloader too? If yes, then where can I find the same.
Many thanks!!!

XXKPE comes with all the files. Use that.

lee82gx said:
XXKPE comes with all the files. Use that.
Click to expand...
Click to collapse
Thanks a lot, buddy. Will download it and check it out. Hopefully wifi works after this, or else I will be screwed. Just got my warranty expired too.

Yay! My phone is back to stock, and wifi works too.:victory: Mods, please close this thread.

[ROM][ODIN] P500VPBMB3 Sprint 4.1.2 Firmware

P500VPBMB3 Sprint 4.1.2 Firmware
For some unusual reason there is little to no development for the SPH-P500 and absolutely ZERO official firmware available for the Sprint model. This means, if you soft brick the tablet trying to install something you should not have, you have no easy way of getting back to the stock firmware. In addition, getting to the 4.1.2 version of the firmware is a royal pain due to the massive amount of "PATCH CHECKS" and assert checks built in to the OTA update. This means any deodexed system or a number of other reasons will be rejected if you try the OTA update while on non-official or approved firmware. So, for your convenience, I have compiled a simple ODIN-Flashable TAR file which will jet you up to speed installing the latest official Sprint 4.1.2 firmware.
Details:
P500VPBMB3 Stock w/ MB3 Modem
Package Includes: BOOT, RECOVERY, SYSTEM, MODEM AND CACHE ZONES
Download:
P500VPBMB3 Sprint 4.1.2 Firmware
Password on the archive is: www.mobiletechvideos.com
How To Flash:
BACKUP YOUR FILES AND DATA BEFORE FLASHING...ALWAYS. First extract this file using WinRAR or a program capable of extracting a RAR package as the package inside it is the TAR file you need. This was done to save time on the download. Once extracted, using ODIN, select PDA and choose this file. Now place your tablet in DOWNLOAD MODE by having it powered off, then power on by holding POWER and VOLUME DOWN until you see the on-screen text come up. Release the buttons and press VOLUME UP to enter DOWNLOAD MODE. Now click START on ODIN. Once completed (takes around 10 minutes), it is advised to enter RECOVERY MODE and perform a FACTORY DATA RESET for the best bug free experience since I don't know what ROM you are flashing from.
Did this help you out? Great, I'm glad it did! Click that THANKS button next to my name if you have the time. Please note, if you find yourself in a hard/soft brick situation of any type on any advice, give me a shout via PM or email through the contact page on our site. We also offer repairs on a number of other issues.

27 downloads and nothing? I'd love some feedback so others can be confident in the firmware.

It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....

Haha it seems that way! Well thanks for your response. Nice to hear from somebody about this. For some reason the Tab 2 10.1 forum members seem to be dead but want development anyhow without any input!

There are a lot of people here in a german forum there is mostly nobody ...
i hope you get some feedback! if not: there is not problem first things that will reported are problems

Haha, how true! No news is good news right?

problem and feedback if it works...
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks

shmusie said:
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
Click to expand...
Click to collapse
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.

connexion2005 said:
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
Click to expand...
Click to collapse
Thank you very much for your prompt reply. You seem to be a helpful sort of person. I am sorry to be so dense but I have no idea what those things are. Is there a place where I can, sort of begin from scratch to learn all about these things or can you please fully explain what I need to do here?
I get that yo said that what you are offering is what I already have. What I don't understand is what exactly what to look for. I do know that if I install the wrong thing, I can brick my device. What I don't know if how to find what I am looking for. I already tried it in the search box-that's how I got to your thread.

This is honestly a very tough section as the P500 is a rare unit that has little to no development. You are in the right sub-forum but finding any mods for your unit may not be possible at this time unfortunately.

Thank you, thank you, thank you!!!!! You can root with Kingo root and make modifications with xposed. I just have been so busy with work.
I will flash this when I have time. Now I can be more risky with flashing because I can now go back to stock ROM.
Sent from my SM-N900P using Tapatalk

Android-Andi said:
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Click to expand...
Click to collapse
Hello, I know its been almost a year, but I tried to flash this ROM and get stuck after the tab reboots with the message "POWER RESET or UNKNOWN UPLOAD MODE", is there anything I can do to restore the tab (I did not do any backup).
Thanks a bunch

Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.

connexion2005 said:
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
Click to expand...
Click to collapse
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.

meresis said:
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
Click to expand...
Click to collapse
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...

connexion2005 said:
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
Click to expand...
Click to collapse
Indeed the back says P5110 ... Chinese devices ... Thanks a lot ! :good:

P500
Wow!! I made a mistake!! I bought this tab to have some fun rooting and installing custom roms. I should have checked the forums first to see if there was any support. Thanks for what you've provided here. I'm going to at least try to root and install xposed.

I have a sprint gtab2 10.1 that's out of contract, so i'm willing to start working on things if needed.

if we no longer need to use the Sprint data can we flash a SPH-P5100 rom for wifi only ?

resurrecting an old thread. Need to find the original firmware for sph-p500. This appears to be it, but I can't find or get the password to the .rar file. I can't find the firmware anywhere else after a TON of google searches. any help appreciated in either getting the password to the .rar file, or a different place to download the firmware.

Hard bricked

I just hard bricked my phone, and I'm hoping I can try to get it working again.
I have made backups using flashfire in the past. (I had a few different backups I made).
Prior to getting hard bricked, I was running the PIA firmware, but I was trying to restore from a backup that I had through flash fire, and due to a total rookie move I ended up restoring (or attempting to) restore to a PG1 unintentionally, and well now I can't do anything.
I think I may have a jig at home from a previous samsung phone (I believe an S3), would that work for my S7?
I also came across this thread: http://forum.xda-developers.com/showthread.php?t=2476353
Would that work for me?
I have a macbook pro I can use terminal with, I have a microSD card and reader, and I already have the stock PIA rom on my hard drive.
Is there hope still?
Right now regardless of what key combination I hold down my phone has a black screen.
Any help would greatly be appreciated.
Thanks in advance!

If you can't get into download mode then you don't have much to lose by trying what the other thread suggested.

@sacnotsack, thanks for the response, and that is my intention, however I am missing 1 crucial part to that thread and that is the debrick.img
Can someone with the PIA (G930TUVU4APIA) rom please post a dump of a partial system img for me? If I'm not mistaken, you can dump it with these commands in ADB.
adb shell
dd if=/dev/block/sda20 of=/sdcard/debrick.img bs=4096 count=128
Just to clarify...
sda20 should be the system partition. Any way that's what it is for me.
You can check yourself by doing typing this in ADB:
ls -al /dev/block/bootdevice/by-name
You will get something like this:
lrwxrwxrwx root root 2016-01-08 10:35 system -> /dev/block/sda20
And to get the block size you would type this:
blockdev --getbsz /dev/block/sda20
So the command
"dd if=/dev/block/sda20 of=/sdcard/debrick.img bs=4096 count=128"
If I get this working, I'll compile a nice tut for S7 users and post all the results with files in case anyone else runs into this issue.
Thank you in advance

I don't mean to be an annoyance, but does anyone have any thoughts or could point me to some direction? I know there are a lot of you that are much more knowledgable in this than I am, and all I'm hoping I can get assistance for is if someone can just make a dump of the debrick.img file so I can try to load it on my SD card.
Thanks

Hi, the easiest way to restore back to stock is to download Odin. I think it's Windows exclusive so you'll need bootcamp and install windows. After that, download Odin and extract it. Download stock firmware from androidfilehost.com, then extract. Open Odin and you'll see the options BL, AP, CP, and CSC. The firmware will have 4 or 5 files and will include these labels. Put each respective files into each options in odin. (Sometimes Odin will freeze, but let it do it's thing) After that, go into download mode (hold Volume down, Power, and Home whole turning on). Wait for Odin to recognize your device, if it doesn't, then download Samsung drivers. After it recognizes, press start and wait for the process to finish. That's it! Hopefully I was able to help.

MetalPhoenix45 said:
Hi, the easiest way to restore back to stock is to download Odin. I think it's Windows exclusive so you'll need bootcamp and install windows. After that, download Odin and extract it. Download stock firmware from androidfilehost.com, then extract. Open Odin and you'll see the options BL, AP, CP, and CSC. The firmware will have 4 or 5 files and will include these labels. Put each respective files into each options in odin. (Sometimes Odin will freeze, but let it do it's thing) After that, go into download mode (hold Volume down, Power, and Home whole turning on). Wait for Odin to recognize your device, if it doesn't, then download Samsung drivers. After it recognizes, press start and wait for the process to finish. That's it! Hopefully I was able to help.
Click to expand...
Click to collapse
MetalPhoenix45, thanks for your response. I have a Windows computer as well and I am very familiar with ODIN. The issue is, that in your explanation my guess is you are thinking the phone is in a "soft bricked" mode. The difference between a hard brick phone and a soft brick phone is that in a hard brick phone nothing is recognized when plugged in, it doesn't power on and it also doesn't show any sign of charge when it's plugged into the power.
In a soft brick mode, your phone can be stuck in a boot loop, or at the very least it still shows signs of it getting power. In which case I can just force into download mode and do what you stated above. I don't think that the things you mentioned above would work for me because when I have my phone plugged in to my computer, in device manager it doesn't detect anything. It doesn't even say unknown device or unrecognized hardware. It doesn't see it at all, and I have loaded the Samsung drivers on my pc because ODIN recognized the device prior to my issue.
I do have the stock firmware and everything on my machine, but I just can't get my phone to power or on into download boot even with a JIG.

m0d hipp¥ said:
I just hard bricked my phone, and I'm hoping I can try to get it working again.
I have made backups using flashfire in the past. (I had a few different backups I made).
Prior to getting hard bricked, I was running the PIA firmware, but I was trying to restore from a backup that I had through flash fire, and due to a total rookie move I ended up restoring (or attempting to) restore to a PG1 unintentionally, and well now I can't do anything.
I think I may have a jig at home from a previous samsung phone (I believe an S3), would that work for my S7?
I also came across this thread: http://forum.xda-developers.com/showthread.php?t=2476353
Would that work for me?
I have a macbook pro I can use terminal with, I have a microSD card and reader, and I already have the stock PIA rom on my hard drive.
Is there hope still?
Right now regardless of what key combination I hold down my phone has a black screen.
Any help would greatly be appreciated.
Thanks in advance!
Click to expand...
Click to collapse
Have you had any luck on fixing s7 I've got same issue I've even got device broken down minus the charger port due to cost of screen replacement! Not sure exactly how to test battery itself but every combination of testing battery externally I've nothing any ideas? I'd rather replace the battery vs charger port or is it completely done? This is.the first root I've ever had go wrong and haven't found any solutions yet and been looking since November
Thanks in advance for any advice
On rooted 910v now have a 920t rooted but let's just say my temper got the best of me and we'll will be replacing screen? Oddly enough as many times as the note 4 has been dropped either by myself or son not even a single scratch s7 definitely a pot more brittle!!

crazynate121 said:
Have you had any luck on fixing s7 I've got same issue I've even got device broken down minus the charger port due to cost of screen replacement! Not sure exactly how to test battery itself but every combination of testing battery externally I've nothing any ideas? I'd rather replace the battery vs charger port or is it completely done? This is.the first root I've ever had go wrong and haven't found any solutions yet and been looking since November
Thanks in advance for any advice
On rooted 910v now have a 920t rooted but let's just say my temper got the best of me and we'll will be replacing screen? Oddly enough as many times as the note 4 has been dropped either by myself or son not even a single scratch s7 definitely a pot more brittle!!
Click to expand...
Click to collapse
Unfortunately, I had no luck. I ended up haing to replace the PCB to fix the issue. Basically I learned the hard way that samsung isn't very "dev friendly". I don't blame them, but for any phone enthusiasts that plan on tinkering with their phone if you get the snapdragon version of the S7 vs the exynos version, you WILL run into trouble.
This is because the bootloader can't be unlocked on the SD models. Furthermore, if you get flagged for custom roms your warranty gets void. Over the years I've noticed Samsung is getting more and more strict about this. Honestly if you want a phone that will play nice with modding it, you should look into the google variants, Nexus, or the OnePlus. I can tell you from personal experience, OnePlus plays well with dev users. In fact they don't void the warranty for using custom roms or anything like that; in fact they're very pro and open about supporting the user base and providing a phone that the user is happy with.
Any way, that was my experience. I don't want to go off topic here, so if you have any questions you can PM me if you like, but the short answer is, if you're hard bricked then you will need to replace the motherboard/pcb. I even contacted places to see if they can jtag or jig or anything and they're not able to do it with the snapdragon S7.

bah double post, sorry I can't delete this

Funny you said nexus just ordered 2 two days ago older 7 but 4g and and what not strictly for experimental and ethical purposes of course was actually shocked at the still high priced note 5 Screen tbh but we live and learn!! SOMETIMES? LOL

m0d hipp¥ said:
Unfortunately, I had no luck. I ended up haing to replace the PCB to fix the issue. Basically I learned the hard way that samsung isn't very "dev friendly". I don't blame them, but for any phone enthusiasts that plan on tinkering with their phone if you get the snapdragon version of the S7 vs the exynos version, you WILL run into trouble.
This is because the bootloader can't be unlocked on the SD models. Furthermore, if you get flagged for custom roms your warranty gets void. Over the years I've noticed Samsung is getting more and more strict about this. Honestly if you want a phone that will play nice with modding it, you should look into the google variants, Nexus, or the OnePlus. I can tell you from personal experience, OnePlus plays well with dev users. In fact they don't void the warranty for using custom roms or anything like that; in fact they're very pro and open about supporting the user base and providing a phone that the user is happy with.
Any way, that was my experience. I don't want to go off topic here, so if you have any questions you can PM me if you like, but the short answer is, if you're hard bricked then you will need to replace the motherboard/pcb. I even contacted places to see if they can jtag or jig or anything and they're not able to do it with the snapdragon S7.
Click to expand...
Click to collapse
I am in the same boat, and considering your experience after this sore event, maybe you can help a lot of us guys here in the same situation.
My case is even worst, because, here in my country, there are NO Snapdragons, just G930F Equinoxes.
You may help im providing us lames the debrick.img file, but you must be rooted to do so. This would ve much appreciated.
Another way is to insert a blank 16GB+ SD card on the phone and format it through Odin. You just insert the card on the slot, enter download mode in the phone and load all files in Odin including the .pit. In Odin options select "Re-format" and "T Flash" that will say to the phone to format the ExtSDCard and use the ExtSDCard as destination instead of the internal emmc!
Post the image of the SD, that you can extract it with the Win32DiskImage, and you and your family will be blessed for ten generations. Also save the file in case you mess things again.
There is one method using QFil,but i'm stil trying to asemble all required files and don't now if it will even work. Should work...!!!
Anyway, can you please help us?
Best regards..

PadsPCB said:
I am in the same boat, and considering your experience after this sore event, maybe you can help a lot of us guys here in the same situation.
My case is even worst, because, here in my country, there are NO Snapdragons, just G930F Equinoxes.
You may help im providing us lames the debrick.img file, but you must be rooted to do so. This would ve much appreciated.
Another way is to insert a blank 16GB+ SD card on the phone and format it through Odin. You just insert the card on the slot, enter download mode in the phone and load all files in Odin including the .pit. In Odin options select "Re-format" and "T Flash" that will say to the phone to format the ExtSDCard and use the ExtSDCard as destination instead of the internal emmc!
Post the image of the SD, that you can extract it with the Win32DiskImage, and you and your family will be blessed for ten generations. Also save the file in case you mess things again.
There is one method using QFil,but i'm stil trying to asemble all required files and don't now if it will even work. Should work...!!!
Anyway, can you please help us?
Best regards..
Click to expand...
Click to collapse
Unfortunately, I won't be of much help. If you have the exynos S7, you would need to ask someone else with the same version of your phone for the software because the SD versions would run on different software due to different hardware.
Is there a reason why you don't try sending it out to get serviced so they can replace your PCB ?
I tried to get the debrick.img file a while back as well, but had no luck in doing so and actually I don't have my S7 phone anymore. I bought the OnePlus 3T and it's been working much better for my needs. I'm sorry to say this, but If you have any intention of modding a phone you have 2 options. 1. Get a phone that supports modding and allows you to unlock the bootloader 2. Get the unlocked variant of the phone.
If I have learned anything from my experience, it's that it is incredibly important to do your research. Not only look at the specs of the phone, but look at reviews from other users with the phone. Also if you plan on modding it, go through some threads and see how easy/difficult it is to mod that version of phone you're interested in.

m0d hipp¥ said:
Unfortunately, I won't be of much help. If you have the exynos S7, you would need to ask someone else with the same version of your phone for the software because the SD versions would run on different software due to different hardware.
Is there a reason why you don't try sending it out to get serviced so they can replace your PCB ?
I tried to get the debrick.img file a while back as well, but had no luck in doing so and actually I don't have my S7 phone anymore. I bought the OnePlus 3T and it's been working much better for my needs. I'm sorry to say this, but If you have any intention of modding a phone you have 2 options. 1. Get a phone that supports modding and allows you to unlock the bootloader 2. Get the unlocked variant of the phone.
If I have learned anything from my experience, it's that it is incredibly important to do your research. Not only look at the specs of the phone, but look at reviews from other users with the phone. Also if you plan on modding it, go through some threads and see how easy/difficult it is to mod that version of phone you're interested in.
Click to expand...
Click to collapse
Then i think got stuck, beacause in these forums there is no one willing/able/interested in helping anyone.
I said i'm in the SAME boat == I got an SM-G930T (from T-Mobile) that has a SnapDragon cpu but HERE in my country THERE ARE NO Snapdragons only Equinoxes. If we had such phones here surely i would have done this already, but G930F's won't do, as i have already tried.
So, as you know how i feel about a brand new SM-G930T Bricked, you wold be my last hope. There is no way to send it back to Samsung beacause it was bought from a friend and surely no warranty.
Anyway, best regards and rest in peace

Oh sorry, I misunderstood you. I'd like to think that it's not so much people don't want to try to help out, it's just that there is nothing that can be done for users on the snapdragon device so no one bothers unfortunately. Sorry to hear about this, and it really is unfortunate that you had to go through the same thing I went through with no help. Trust me, if I was able to do anything to provide any guidance I would.
Good luck!

[ROM][Odin](Stock PL1) (QI1 linked)Samsung Galaxy J3 Emerge SM-J327P

This is the Odin ROM of the PL1 software for the Samsung Galaxy J3 Emerge. It was pulled from Smart Switch, which is the replacement to Kies. This is specifically for the SM-J327P for Sprint. It would appear that Boost and Virgin Mobile variants can be flashed as they are used on Sprint's network, but no promises will be made.
By using these files, any user assumes the responsibility for their devices, that they understand how to use the files and software, and accept any and all risks involved with such operations.
When selecting the files in Odin, one must select the appropriate files based on the prefix of the file name. Each of the four boxes must have a file listing.
In the "CSC" box, use the file beginning with "home_CSC" to retain your user data, or use the "CSC" file to completely wipe user data. If you bricked your device, you may need to resort to using the "CSC" file. If you flash with "home" and it still fails to work, use "CSC." (that's my understanding of the two files anyways)
If you are down-grading, you may have to select the "NAND erase all" check box. This will completely wipe the device and should allow a fresh install. Be careful, if the phone dies, I would worry about a hard brick, but I'm not positive about that though.
Google Drive link:
https://drive.google.com/file/d/0B2iEgzRTFjrQWlpEbURIWUlXLWc/view?usp=drivesdk
There have been several reports that these Odin ROMs fail to flash. If that happens to you, you may be able to try an alternate procedure here. Keep in mind this procedure will trip Knox and probably void warranty if you haven't done that already:
https://forum.xda-developers.com/general/general/rom-stock-pl1-samsung-galaxy-j3-emerge-t3689346
The newer QI1 version is posted here, and has been confirmed:
https://forum.xda-developers.com/showpost.php?p=74171277&postcount=39
and if you're more enterprising with your computer and image file skills:
https://forum.xda-developers.com/showpost.php?p=74137125&postcount=29

Greaper88 said:
This is the Odin ROM of the PL1 software for the Samsung Galaxy J3 Emerge. It was pulled from Smart Switch, which is the replacement to Kies. This is specifically for the SM-J327P for Sprint.
By using these files, any user assumes the responsibility for their devices, that they understand how to use the files and software, and accept any and all risks involved with such operations.
When selecting the files in Odin, one must select the appropriate files based on the prefix of the file name. Each of the four boxes must have a file listing. I'm not sure what the difference between the "CSC" and the "HOME _CSC" files is (or that it really matters), but I'd imagine that if one is resorting to this, then someone could tell us... Based on my previous devices, I'd recommend the "CSC" file.
https://drive.google.com/file/d/0B2iEgzRTFjrQWlpEbURIWUlXLWc/view?usp=drivesdk
Click to expand...
Click to collapse
good stuff broseph,might (MIGHT) have a go ,idk re cinfiging my type of peivacy and workarounds aint time cheap so ill leave it at that, good ish tho, I wanna create a deodexed verasion myself but had a setback pc wise regarding a unbootable Hdd , I believe a deodexed rom to be a pre-requisite to having the xposed framework workout ....am i correct in believing this guys and gals? Let me know because I really love my ubuntu pc and would most likely buy a hdd just for these type of tasks since compipation would require over 100gb from what I have heard ,. 4 gb file then decompile and rexompile eaxh of the apps and framework resources.

Doctur said:
good stuff broseph,might (MIGHT) have a go ,idk re cinfiging my type of peivacy and workarounds aint time cheap so ill leave it at that, good ish tho, I wanna create a deodexed verasion myself but had a setback pc wise regarding a unbootable Hdd , I believe a deodexed rom to be a pre-requisite to having the xposed framework workout ....am i correct in believing this guys and gals? Let me know because I really love my ubuntu pc and would most likely buy a hdd just for these type of tasks since compipation would require over 100gb from what I have heard ,. 4 gb file then decompile and rexompile eaxh of the apps and framework resources.
Click to expand...
Click to collapse
The system ROM is actually about five and a half gigabytes based on the storage info in the device settings (on my device anyways). So here's what I'm thinking makes sense for space required. I'm just gonna round the decompiled ROM up to 6GB to allow room to play with. Here's the space you'll need at a minimum:
1. 6GB for the compiled ROM.
2. 6GB for the decompiled ROM.
3. 6GB minimum for working with the ROM, so that your source is unmodified.
4. 6GB for the recompiled ROM.
So you'd need a minimum of 24 GB to work with, but the more you have, the more breathing room you have. This is just my 2¢... As for the rest of it, I have no real clue.

I just bought the j327p last week and I am returning it today if I can't get the tethering to work.
I tried editing a lot of the easily searchable fixes which there aren't many.
Do you know if installing this might work?

Just obtained this phone from Boost Mobile. Am I correct in thinking that this ROM should work on a Boost Mobile phone seeing as Boost is an MVNO of Sprint?

SammaelAkuma said:
Just obtained this phone from Boost Mobile. Am I correct in thinking that this ROM should work on a Boost Mobile phone seeing as Boost is an MVNO of Sprint?
Click to expand...
Click to collapse
It works and it's been updated from APL1 to AQB6 .. at least mine has .. and I don't know what was updated or what's new but it's still on Android 6.0 .. I just used this to fix my Boost J3 Emerge after it got stuck installing an app from the Galaxy S8

Doctur said:
...I believe a deodexed rom to be a pre-requisite to having the xposed
This link will get xposed to work...
https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
TD378
Divided we stall,
United We Install!
Click to expand...
Click to collapse

Actually Wanam got xposed working on our device. Nice tut but its really almost standard issue when dealing with samsung. Im guessing this is your first galaxy phone? Personally done myself on the galaxy s4 sch r970 (ya the one from 2013.. ), j7 j700t and this galaxy emerge 327p, there are also many tutorials on how to do so, thanks for trying to help, but you could have just linked wanams thread wich has all cautions and tuts in like 12 words a HUGE thanks to Wanam for spending countless hours making a modded version of xposed that is compatible with ours as well as many other galaxy devices!!!

Project89Odin said:
...Im guessing this is your first galaxy phone? Personally done myself on the galaxy s4 sch r970 (ya the one from 2013.. ), j7 j700t and this galaxy emerge 327p...
Click to expand...
Click to collapse
Choose to stay away from "main stream" phones for a number of reasons.
But at the request of your post, link has been updated!
TD378
DIVIDED WE STALL
UNITED WE INSTALL

Thank you, the Galaxy J3 is not a very followed device by samsung of the fact that it is not high-end
________________________________________________________________________________
http://iphon8.fr/ galaxy note 9

Greaper88 said:
This is the Odin ROM of the PL1 software for the Samsung Galaxy J3 Emerge. It was pulled from Smart Switch, which is the replacement to Kies. This is specifically for the SM-J327P for Sprint.
By using these files, any user assumes the responsibility for their devices, that they understand how to use the files and software, and accept any and all risks involved with such operations.
When selecting the files in Odin, one must select the appropriate files based on the prefix of the file name. Each of the four boxes must have a file listing. I'm not sure what the difference between the "CSC" and the "HOME _CSC" files is (or that it really matters), but I'd imagine that if one is resorting to this, then someone could tell us... Based on my previous devices, I'd recommend the "CSC" file.
Click to expand...
Click to collapse
I'm having a severe problem right now... I'm praying this works. I keep getting a "SECURE CHECK FAIL : ABOOT" error with every firmware I try. I have a bricked j3 emerge.
do you have any tips on which file I can put where in odin? I was patient to let this download... and I feel like this is the closest thing I have that will get it working.

vivianajeanty said:
I'm having a severe problem right now... I'm praying this works. I keep getting a "SECURE CHECK FAIL : ABOOT" error with every firmware I try. I have a bricked j3 emerge.
do you have any tips on which file I can put where in odin? I was patient to let this download... and I feel like this is the closest thing I have that will get it working.
Click to expand...
Click to collapse
Download the default firmware here...
http://updato.com/firmware-archive-select-model?record=F2F2C99C28B211E7963AFA163EE8F90B
In Odin, put each file in the correct section "ex. APxxx goes in AP section."
Use CSCxxx file NOT Home_CSCxxx in CSC section. All data will be lost.
Brick problem will be solved. Let me know if you need a tut created.
TD378
Divided we stall
United we install

If refering to me as this being my first Samsung that would be a negative....mainly all ive dealt with or care to deal with besides a few exceptions ( IOS Not EVER being one of those) After all thesr years of either referring quickly to this site or the last 2 1/2 pouring countless hours learning random device or specific ...usefull or not (* Few times have i bee let downyet its been an occurance.. worth noting) I belived it was time to throw my hat inthe ring.
So mainly besides wanting to recontribute the resources I have.....mostly my hours of studying and stuff i picked up retentetion being put work and the test and the Love of Working in A Linux Terminal
(*Flavor preference is not important.)
And the Fact that I have a Laptop that can process at about 3.7ghz with 8 threads if you include hyperthreading...along with my growing older and not wanting to Let small contributions like that and Development left saught after by the few.....and honestly which matters in some places I am only scraping by so Financially I have nothing to offer the community along with Tha Mad Love I have for everything XDA ....put that together and you got me doing what I can..Lately it hasnt been to much but wait around and other issues that have eaten away at time leaving me unable to do simple things such as deodex......tho I was looking to do it the hard way and by hand..
My apologizies if the post after mine answered or the second one did but I have yet to read link .....so besides me knowing Wanam got a way around it for most the Install and Stuff
My true and Last Attempt at my first Question
FINGERS CROSSED
LONG
Would there be any necessity in the terms of Modular Functionality either individual or a compilation of your choosing and or combination that would specifically require you to deodex the firmware of any 5.0 or Higher Samsung Based Firmware so that one might have a higher sucess rate or all around better experince?
SHORT
Should i spend my time deodexing this rom for the few who have it in attempts to better the end user experience , spend my time else ?
Id like a little bit of step i the right direction but might just do it and then move to more time , intelectually and pc resource consuming work....
---------- Post added at 01:14 PM ---------- Previous post was at 01:04 PM ----------
vivianajeanty said:
I'm having a severe problem right now... I'm praying this works. I keep getting a "SECURE CHECK FAIL : ABOOT" error with every firmware I try. I have a bricked j3 emerge.
do you have any tips on which file I can put where in odin? I was patient to let this download... and I feel like this is the closest thing I have that will get it working.
Click to expand...
Click to collapse
Umm I know if you downloaded off a disrepputable and FREE source that it might be the CSC partiton. I ll pm you with a copy of my firmware that was Adb Pulled by my old Firmware subcription site and did in Fact come from my device.....or the file was set to reupload for seeding purposes....idk either way we will handle this as a community united.
NOTE
I have since given device up....
Havent given up on it ...
So yeah to modding out a new more flagship type model...
Building ,Porting , Deodexing this J3 ....
And just seeing a lil development o a mid to low end device * price =low specs=mid....ish
Growing as a person in both knowledge and contributionally as well. Thanks 4 time.... **Sorry if I ramble.**

this did get my boost samsung j3 emerge working again but the problem is no matter what i do i can not get it to pass the safety net test :/ the software version is also different from the stock version
this version:j327pvpu1apl1
stock version:J327PVPU0APJ2
am i correct in assuming that this could be my safety net issue? and if so can anyone help point me in the right direction to the stock boost firmware? ill be searching for it regardless but if i can get help before i find it then that'd be super thanks for asking

tac0xenon said:
this did get my boost samsung j3 emerge working again but the problem is no matter what i do i can not get it to pass the safety net test :/ the software version is also different from the stock version
this version:j327pvpu1apl1
stock version:J327PVPU0APJ2
am i correct in assuming that this could be my safety net issue? and if so can anyone help point me in the right direction to the stock boost firmware? ill be searching for it regardless but if i can get help before i find it then that'd be super thanks for asking
Click to expand...
Click to collapse
Are you rooted? Or running a custom kernel? Both of those things and a few others will cause you to fail. Another option would be to select NAND erase in ODIN when you flash. That will completely wipe your device before flashing, but as with any flashing procedures, it could lead to an unusable device.

Greaper88 said:
Are you rooted? Or running a custom kernel? Both of those things and a few others will cause you to fail. Another option would be to select NAND erase in ODIN when you flash. That will completely wipe your device before flashing, but as with any flashing procedures, it could lead to an unusable device.
Click to expand...
Click to collapse
I was rooted with super su but after failing safety net I began searching for a a way around it and i successfully unrooted my phone then re rooted with magisk and passed the safety net test yay! And life was good for a while until I to install xposed framework. I made a super noob mistake and flashed it with a low battery percentage and of course it died in the middle of it. I turned my phone on and no OS... Crap baskets... noob mistake number 2 my nandroid backup I must not have been paying attention and tried to save it to internal storage instead of the SD card which if you own this phone you probably know that it doesn't work that way so double crap baskets.
Fast forward to finding this post I loaded it up everything works as it should but it won't pass safety net rooted or not and no custom kernel
This is not a life or death problem as everything works flawlessly except for the safety net test But my woman likes to go on walks and play Pokémon go together and now I can't and it is slightly annoying that we are no longer able to. It's a cheap way to get outside and have a little fun towards the end of the week as opposed to Netflix and other boring stuff

tac0xenon said:
I was rooted with super su but after failing safety net I began searching for a a way around it and i successfully unrooted my phone then re rooted with magisk and passed the safety net test yay! And life was good for a while until I to install xposed framework. I made a super noob mistake and flashed it with a low battery percentage and of course it died in the middle of it. I turned my phone on and no OS... Crap baskets... noob mistake number 2 my nandroid backup I must not have been paying attention and tried to save it to internal storage instead of the SD card which if you own this phone you probably know that it doesn't work that way so double crap baskets.
Fast forward to finding this post I loaded it up everything works as it should but it won't pass safety net rooted or not and no custom kernel
This is not a life or death problem as everything works flawlessly except for the safety net test But my woman likes to go on walks and play Pokémon go together and now I can't and it is slightly annoying that we are no longer able to. It's a cheap way to get outside and have a little fun towards the end of the week as opposed to Netflix and other boring stuff
Click to expand...
Click to collapse
Hmm. I do know that you need to enable "oem unlock" and power the phone COMPLETELY off. It doesn't hurt to pull the battery for a minute, but shouldn't be necessary. Then power it on into download mode, and leave the auto reset checked in ODIN. It can take a couple of flashes I've read to get everything back to where it should be.

Greaper88 said:
Hmm. I do know that you need to enable "oem unlock" and power the phone COMPLETELY off. It doesn't hurt to pull the battery for a minute, but shouldn't be necessary. Then power it on into download mode, and leave the auto reset checked in ODIN. It can take a couple of flashes I've read to get everything back to where it should be.
Click to expand...
Click to collapse
Thanks for the tips I'll try it when I get home and let you know how it goes much appreciated

Greaper88 said:
Hmm. I do know that you need to enable "oem unlock" and power the phone COMPLETELY off. It doesn't hurt to pull the battery for a minute, but shouldn't be necessary. Then power it on into download mode, and leave the auto reset checked in ODIN. It can take a couple of flashes I've read to get everything back to where it should be.
Click to expand...
Click to collapse
Had to flash three times but your advice worked thank you very much

Frp
Hello I have a question I'm a newbie and I would like to know if when I do install the stock rom does that mean I have to put in the google account information of the person providing the stock rom