hi,
am new here, i have android head unit in my car (kia borrego) and i want to update it, i need someone to tell how to update in details and to give me the correct files, details for my android head unit are in the picture below/attached
no body can help me
OP the information you need is all in the mtcd forums. Take your time, read and enjoy.
marchnz said:
OP the information you need is all in the mtcd forums. Take your time, read and enjoy.
Click to expand...
Click to collapse
sorry but am very weake in this, can you pleas tell me where i can find it?
Related
Hey guys! Been out of the rooting game for a while now. All these locked bootloader nowadays has that effect. Thank God for the Chinese! I just ordered a android head unit for the car from Amazon :
Volsmart 7 inch Android 5.1.1 Car Stereo Lollipop Quad Core 1024600 Capacitive Touch Screen without DVD Player support GPS Navigation Radio Bluetooth OBD2 USB SD WiFi ScreenMirror Backup Camera https://www.amazon.com/dp/B01FVV8U2M/ref=cm_sw_r_other_apa_5jF5xbJ1VW5C8
And I'm wondering what the root process is like for one of these. I'm not sure sure if I should be looking for this specific device, or just something generic based on the software version for instructions. Can anyone point me in the right direction?
I have Volsmart 5.1 Mtcd-kgl mcu version 1.75_1. If your Mcu version is older, you can ask the seller to give you the latest firmware.
You can use Malaysk MTCD ROM.
I used Malaysk Rom v5 and then upgraded to V6. My HU is running without issue. Malaysk ROM is a pre rooted ROM.
Make sure that you know how to get to recovery menu of the head unit.
Right after upgrading to Makaysk ROM, it is hard to get to recovery to clear cache and data. Keep trying several times, you will be able to. After this, getting to the recovery is normal.
If you don't want to use Malaysk ROM, use Kingo Root, just follow the Xposed LP thread under MTCB development. I did try it successfully before I used Malaysk ROM.
So basically it's just as simple as flashing a different rom, eh? Sounds a little too easy lol
Got it all installed over the weekend. Working great!
Volsmart firmware
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
---------- Post added at 07:08 AM ---------- Previous post was at 07:00 AM ----------
cemotech said:
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
Click to expand...
Click to collapse
Sorry, after some more searching I found it here. http://forum.xda-developers.com/and...k3188-mtcd-t3366561/post69468247#post69468247
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Ariel please share de link
Hi,
I'm looking for a repository of all known factory ROMs for MTCE devices. I haven't noticed a MTCE board here on XDA and the fileserver at http://huifei.fs-fileserver.de/content/ is down for no apparent reason?
if you'll need i have the last
STOCK ROM XTRONS (GS) 04.09.2018 ANDROID 8.0
but the forum don't let me posting outside links
if you need PM me
detail
Are you looking for a specific ROM or are you the owner of a bunch of ROMs and you need a host to offer them to the people?
I am looking for a convenient place where all the ROMs that people find and share are stored. This used to be http://huifei.fs-fileserver.de, but the link has been dead for some time.
NaviPR said:
I am looking for a convenient place where all the ROMs that people find and share are stored. This used to be http://huifei.fs-fileserver.de, but the link has been dead for some time.
Click to expand...
Click to collapse
You're probably looking for this:
https://yadi.sk/d/umCvHqCDzHccr
nFKT said:
You're probably looking for this:
https://yadi.sk/d/umCvHqCDzHccr
Click to expand...
Click to collapse
Correct! Thanks!
good!
Hello All,
I've used the XDA forums for research in info for a long time but I'm new to posting to the forums so I hope I'm posting in the correct location for this.
I have a new HU and am trying to identify the manufacturer so I can hopefully find the correct ROM and recovery for it.
HU Specs:
MCU - MTCE_HT_V3.13c_1
Model & Hardware - PX30(1024x600)
Android Version - 9
Build Number - rk3326_mid_userdebug 9 PQ2A.190305.002.20190603.120251 test-keys
As I understand, the HT portion of the above MCU should designate the manufacturer but I don't find them listed in any of the known manufacturers lists. If anyone can assist with identifying who they are and if there are any ROMs I can safely use with this HU I would appreciate it very much. Please let me know if I need to supply any other info. Thanks.
Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.
LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...
themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!
I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
AHMD92 said:
hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
Click to expand...
Click to collapse
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
@surfer63 always impressed me, by his fully attention to the community members, he points members ALWAYS trough the right way, like "Yes do it BUT before read ....." to keep them as much adviced as possible.
You must be surely a project manager in your live or someone with a fully responsability Job (minimum, a team Manager, maybe Director).
I let fall my hat in front of your @surfer63 , you're a PRO
Sorry for the out of scope here, but feel the need of sharing this photos with you, after all, for me you're ALL my friends:
Look what the man did to my car, he literally destroyed it :
My sadness, now in penal court !
surfer63 said:
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
Click to expand...
Click to collapse
tq mate very helpful , btw any tips on how to boot into recovery ? i tried many way still no luck.