Hello All,
I've used the XDA forums for research in info for a long time but I'm new to posting to the forums so I hope I'm posting in the correct location for this.
I have a new HU and am trying to identify the manufacturer so I can hopefully find the correct ROM and recovery for it.
HU Specs:
MCU - MTCE_HT_V3.13c_1
Model & Hardware - PX30(1024x600)
Android Version - 9
Build Number - rk3326_mid_userdebug 9 PQ2A.190305.002.20190603.120251 test-keys
As I understand, the HT portion of the above MCU should designate the manufacturer but I don't find them listed in any of the known manufacturers lists. If anyone can assist with identifying who they are and if there are any ROMs I can safely use with this HU I would appreciate it very much. Please let me know if I need to supply any other info. Thanks.
Related
Is there anybody out there that has any knowledge on this tablet? The back of it Says D.Age, the model i have seen listed as DA-988 and DA988. Searches on line seem to point to Double Power Tech (DOPO?) as the main company that make them. I am looking to get any information I can on backing up the firmware that is on this tablet, and seeing if there is any custome roms anywhere arount for it. I believe it has a boxchip A13 1.2 processor in it. If there is a way to get more information, please let me know, and I will post what is needed. I do have this info from the about screen:
Model Number DA988
Android Version 4.0..4
Baseband version 1.5
Kernel Version 3.0.8
Build Number 98v2-P1-H1-H01-2833.20121103
Any thoughts or help would be great
Thanks everyone.
Hello All,
Long time lurker but finally I have not been able to find a solution to my problem.
I made the mistake of purchasing a Y511-T00 on a recent trip to china after quickly reading the box which said WCDMA. There was a sticker on the side however that said TD-SCDMA. Anyway finally home I realise no 3G. Which I can live with 90% of my time online is via wifi and mobile wifi device.
The issue has come now where I need to get a better ROM for the phone. I have some half baked english rom that is laggy and does not save credentials for facebook etc. In fact I am at a point where I would not mind getting the Huawei stock with emotion UI. The details of the phone are as follows
Model Number : HUAWEI Y511-T00 (China Mobile)
Android version : 4.2.2
Baseband version MOLY.WR8.W1319.MD.TG.MP.V4.P18 , 2013/07/31 15:37
Kernel Version 3.4.5
Build Number : Y511-U30V100R001C328B120
Hardware version : VER.A
If anyone can assist with a guide on how to change the rom and maybe confirm if i can use the y511-u00 roms as I need something in english I would greatly appreciate it. Also any directions to a forum for support for this phone with other users in English would be great
Thanks so much
Hi,
Sorry, but I don't find anything related to your device, so you must post this question in general Q&A forum from here:
> General discussion > Questions and Answers
Good luck
Thread closed and completed. Thank You.
i have head unit HuiFei and its version MCU version MTCB - KGL4 - V.2.08 AT OCT 24 2014 and model no. S07 anndoid version 4.4.4 -10122014
and lately unit started to give me a lot of error so i decided to upgrade or down grade to have it working i installed from your site the following upgrade
MCU version MTCB - KGL1 - V.08 OCT 24 2014 and Andoid version became 4.4.2-30102014
after this i have the can bus did not work even after i put a check in the factory setting still does not work , put i am happy with the unit no more error and BT for i phone working better without unit
how i can get my can bus system works and my car is SKODA FANTAZIA 2010 ?
THANKS
AEMIRA said:
i have head unit HuiFei and its version MCU version MTCB - KGL4 - V.2.08 AT OCT 24 2014 and model no. S07 anndoid version 4.4.4 -10122014
and lately unit started to give me a lot of error so i decided to upgrade or down grade to have it working i installed from your site the following upgrade
MCU version MTCB - KGL1 - V.08 OCT 24 2014 and Andoid version became 4.4.2-30102014
after this i have the can bus did not work even after i put a check in the factory setting still does not work , put i am happy with the unit no more error and BT for i phone working better without unit
how i can get my can bus system works and my car is SKODA FANTAZIA 2010 ?
THANKS
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is an XDA area dedicated to Android Head Units at http://forum.xda-developers.com/android-auto/android-head-units which would be a good starting place. I suggest you post your question with all relevant details in the thread there at http://forum.xda-developers.com/showthread.php?t=2660662 where the experts familiar with your device will be best able to guide you but I don't know if anyone will have any special insight on your particular car model. Be patient and give the members plenty of time to respond.
Good luck!
EDIT: Member has posted in the suggested forum. Thread closed.
Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.
LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...
themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!
I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
hi,
am new here, i have android head unit in my car (kia borrego) and i want to update it, i need someone to tell how to update in details and to give me the correct files, details for my android head unit are in the picture below/attached
no body can help me
OP the information you need is all in the mtcd forums. Take your time, read and enjoy.
marchnz said:
OP the information you need is all in the mtcd forums. Take your time, read and enjoy.
Click to expand...
Click to collapse
sorry but am very weake in this, can you pleas tell me where i can find it?