Question Trouble rooting my Pixel 7 Pro

Question Trouble rooting my Pixel 7 Pro - Google Pixel 7 Pro

I am trying to root my new Pixel 7 Pro, build number TD1A.220804.031, but have run into an issue. Let me explain what I have done and where the issue arose:
I am following the instructions here: https://www.xda-developers.com/how-to-unlock-bootloader-root-magisk-google-pixel-7-pro/. I found the factory image for my phone, downloaded it, then downloaded/installed the Payload Dumper Tool, extracted init_boot.img, copied it to my phone, patched it using Magisk, and copied it back to my computer. Took a bit longer than expected, but no problems.
Via the phone’s setting, I enabled OEM Developer options and then allowed OEM Unlocking. Again, no issues. I then turned the phone off, attached the phone to my computer using a USB cable, and then booted it so that the bootloader menu was visible. In a command window on my PC, I then ran ‘fastboot flashing unlock’. I think this worked (because, when I restarted the phone, I had to go through the whole initialization process again).
The next step is where I ran into the problem. The first time, I put the modified init_boot.img in a new folder on the C: drive, but when I ran ‘fastboot flash init_boot path/to/magisk_patched.img’, I got the error “fastboot: error: cannot load <patched file>: permission denied”. So, then I copied the file to a folder on D:, ran the same command, and got the same error.
I suspect that I missed a step or something equally silly. Any suggestions as to what I should try or any pointers to other rooting guides that might be helpful? Don’t know if this means anything, but when the phone was powered off and plugged into the computer, I tried ‘adb reboot bootloader’ but nothing happened.

When you reboot, do you get the orange triangle with exclamation in it?
it might just be easier to move the magisk_patched.img to the platform-tools folder (the same folder that has adb.exe and fastboot.exe); if you are having "permission" issues from Windows, but you aren't from adb or fastboot, then supposedly having it in the same folder should run it under the same permissions.
Also, make sure that you run CMD as an elevated prompt; search for CMD, right-click, and "Run as administrator" -- this might help with the permission issues as well.
Final suggestion is to be sure to run platform-tools version r33.0.3...
Good luck and hope this helps...
P.S. Also, you might've had better luck and/or it's better organized if you posted in the Pixel 7 Pro (cheetah) forum instead of the Pixel 7 (panther)....

Use Pixel Flasher. Less hassle, more convenience.

Related

Root Nvidia Shield clarification

Hi after reading through the post on GitHub on how to simply root your shield I have a few questions that the tutorial doesn't make clear:
1)There are a ton of files at the top and not sure what to do with them...
2) There is a bit where it explains "On your computer, navigate into the directory containing this file and enter the following command:
fastboot boot zImage_dtb ramfs.img.gz"
But it doesn't say that after you open the directory what you do with it?
Do you keep the window open and that's fine?
Do you type in it's location into command prompt before you type in: fastboot boot zImage_dtb ramfs.img.gz?
Just a bit confused as to what all the files are and where I put them and how they have to be utilised etc
Just need clarification for peace of mind
wanted to post the link but forum won't let me yet

Root explanation
Hi here is the main walkthrough from github but as I said there are a few plot holes for people who are new.
If your SHIELD is already unlocked, you can skip this section.
SHIELD ships with an unlockable bootloader. The bootloader is locked by default, which prevents anyone (including yourself) from booting custom OSes and changing system partitions to potentially obtain extra privileges. This is a significant security feature: in the event that your device gets stolen, an attacker will not be able to retrieve your personal data or use your device if your lock screen has a password set.
By unlocking the bootloader, you allow anyone with physical access to your SHIELD to boot custom images and flash system partitions. This opens the way for an attacker to access your personal information or physically damage your device. For this reason, unlocking the bootloader will erase all your personal data like a factory reset does (so a potential thief cannot get it) and will also void your warranty.
If you know you really, really want to take these risks, here is how you unlock SHIELD's bootloader.
Switch your SHIELD off (long press the NVIDIA logo button and select Power off).
Power your SHIELD on while maintaining the back and home buttons pressed (these are the two buttons that lie under the big NVIDIA-logo button, on its left and right). Release them once you see the bootloader screen.
Connect your SHIELD to your computer using a USB cable.
On your computer, enter the following command:
fastboot oem unlock
This will display the unlock menu. Read the disclaimer and think one last time about what you are doing. This is your last chance to stop.
Use the back and home buttons to select your option. If you decide to continue, select Unlock and press the NVIDIA-logo button to validate. Your personal data will be erased and your device marked as warranty-void permanently.
Regardless of your choice, you will be back to the bootloader screen. Using the same buttons, navigate to Poweroff and select this to power your SHIELD off.
Rooting SHIELD
Now your bootloader is unlocked, but you still don't have root access. For this, we need to install SuperSU, and we will do so by booting a custom Linux image that will do this for us.
Power your SHIELD on while maintaining the back and home buttons pressed (these are the two buttons that lie under the big NVIDIA-logo button, on its left and right). Release them once you see the bootloader screen.
Connect your SHIELD to your computer using a USB cable
On your computer, navigate into the directory containing this file and enter the following command:
fastboot boot zImage_dtb ramfs.img.gz
The kernel and ramdisk will be downloaded and started. You will see 4 penguins on your screen, and the message ROOTING SHIELD will appear. Shortly after, your device will reboot. Congratulations, you are rooted!
For some unknown reason USB debugging in Developer options might become unchecked after rooting. You will need to re-check it if you want to use ADB.
It is safe to perform the rooting operation as many times as you want (e.g. after an OTA). Your user data will not be erased by rooting itself, it is the act of unlocking the bootloader that does.
Is there anyone who can add a little to this to make it more simple for a noob like me?
I understand there is a file set that is at the top of the page and I downloaded the files which include zImage_dtb ramfs.img.gz
but don't know how to utilise them etc
There are no videos on youtube of how to do it and if anyone can add just a few more steps so that I know where I'm going with this (don't want to brick my system).
I just want controller support installed like Tincore or gamekeyboard so I can unlock the potential of the games library on GooglePlay.
Thanks for reading.

you copy those two files "zImage_dtb" & "ramfs.img.gz" to the same directory your adb and fastboot executeables are (same directory you issued the oem unlock command from)
then navigate to the same directory you did the oem unlock from via command line then issue the command "fastboot boot zImage_dtb ramfs.img.gz"
it's pretty simple but I can run you through a simple example of what I did
1)download android sdk
2)copy platform tools folder to a directory on c drive (exp c:\tools\ )
3)copy the 2 files above to the same folder along with cwm recovery(optional)
4)boot shield into fastboot mode (home+back+power)
5)navigate to the folder with adb, fastboot, and the above files in it.
Code:
cd c:\tools
6)detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection
7)issue oem unlock command and follow the onscreen prompts
Code:
fastboot oem unlock
8)restart device, after a full boot cycle(wipes data), power back into fastboot
9)issue the "rooting image" command, device with automatically reboot
Code:
fastboot boot zImage_dtb ramfs.img.gz
*10) optionally reboot back into fastboot and install cwm recovery
Code:
fastboot flash recovery recovery.img
pretty simple

thanks for fast reply.
Ok so I have Two different versions of Android SDK (32 bit and 64 bit) which one do I use?
"copy platform tools to a directory on C drive (exp C:\TOOLS\)"
What are platform tools?
"copy the two files above to the same folder along with cwm recovery"
What two files? do you mean the zImage_dtb and ramfs.img.gz? Do they go into the C:\TOOLS\ folder?
"navigate to the folder with adb, fastboot, and the above files in it"
What do you mean by navigate? Do you simply mean open the folder or do I use a program to do this?
"Detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection"
What's fastboot devices? What does result and no result mean? What does Check driver and check connection mean? how dod I do that?
I'm confused by all the lingo, what applications I should be using and when exactly do I start using command lines etc
Thanks for help so far been great but I need step by step instructions eg
open folder, copy and paste file1 and file 2 to this folder
open application X
click import file 1 and file 2
type XXXXXX\root\cdrive into command
press enter
see?
I do not know what some of the words mean and how to do some of the stuff the tutorial says. It's jargon and I have all these files, in all these folders with no idea how to do this from start to finish.
Appreciate the help so far but you are dealing with a novice. I know the work won't take long but I need all the relevant info, in one list, with consistent language to ensure I do everything as it should be done.
Bless you sir and...
Good luck

If your confused by my instructions you need to wait for a "one click" installer, sorry.

gogul1 said:
Ok so I have Two different versions of Android SDK (32 bit and 64 bit) which one do I use?
"copy platform tools to a directory on C drive (exp C:\TOOLS\)"
What are platform tools?
"copy the two files above to the same folder along with cwm recovery"
What two files? do you mean the zImage_dtb and ramfs.img.gz? Do they go into the C:\TOOLS\ folder?
"navigate to the folder with adb, fastboot, and the above files in it"
What do you mean by navigate? Do you simply mean open the folder or do I use a program to do this?
"Detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection"
What's fastboot devices? What does result and no result mean? What does Check driver and check connection mean? how dod I do that?
I'm confused by all the lingo, what applications I should be using and when exactly do I start using command lines etc
Thanks for help so far been great but I need step by step instructions eg
open folder, copy and paste file1 and file 2 to this folder
open application X
click import file 1 and file 2
type XXXXXX\root\cdrive into command
press enter
see?
I do not know what some of the words mean and how to do some of the stuff the tutorial says. It's jargon and I have all these files, in all these folders with no idea how to do this from start to finish.
Appreciate the help so far but you are dealing with a novice. I know the work won't take long but I need all the relevant info, in one list, with consistent language to ensure I do everything as it should be done.
Bless you sir and...
Good luck
Click to expand...
Click to collapse
Step by step instructions like that would take quite a long time to write. Its basically assumed that navigate is a straight forward instruction, namely, open My Computer, click C:\, click something else, etc etc. 32 bit vs 64 bit, again, you should know what your computer is running and use the correct one respectively.
The reason they dont issue novice instructions is for 1 reason only. People who such as yourself claim to not understand the "jargon" are also those who are more likely to make a mistake when rooting. This can lead to a completely bricked device, ie one that will no longer turn on and load up android, totally dead device. As far as the manufacturer is concerned, a bricked device unless bricked by one of their own updates on a non rooted shield installed correctly, is not covered by warranty. This leads said novice to accuse the tutorial writer of having something wrong in the tutorial when in reality they have clicked the wrong thing etc.
Either way, end result: dead device.
Rooting is not aimed at the novice. It is aimed at the advanced user.

Thank you
I understand that and appreciate the explanation. I can work my laptop and I know that my laptop is 32bit or 64bit but it did not say at any point that it was referring to my computer. It just said download the 32 or 64 bit version. Well I have to make sure what they are talking about before I go and try to root my device as I like clarification on everything I do so that I get it right (and don't brick it). At the moment the explanations are all over the place, some info here, another bit there and was hoping somebody could link it all for me and make sense of the order in which I would do things. I have installed graphic cards in my laptop, put custom firmware on to ipods, psp's, computer etc but this is my first foray into android territory and would like to get it right. I am trying to follow a video tutorial but my computer's reaction to driver updates for the ADB/Fastboot drivers is telling me my drivers are up to date and I'm not getting the error message his is. This means I'm not sure where to go as the situation is diffferent s He is trying to get motochopper working for shield so it will root the device and hoped it would do the same for me.
Hopefully some clarification will come sooner rather than later but won't venture fourth until I'm absolutely sure of what needs to be done.
Again, thanks for the help it is appreciated.:laugh:

Sorry for being so abrupt, it wasn't my intension, you are trying to learn. I will not give a step by step which I feel would be the best, yet potentially more dangerous option for you though.
The parts written in the "code" blocks are what you copy and paste into the command line. When I say navigate I mean by changing directory via command line. You can copy files with a graphical file manager as it's quicker but navigate could also mean graphically.
Google search how to tell if you are running 32 or 64 bit windows, there are better guides and videos than I would be able to describe in a few lines. I was assuming you had already unlocked your bootloader as it is required before root, I covered it as point of reference only.
Platform tools is a folder in the SDK, if you install the SDK you will see that folder where you install it.
Fastboot is the utility also in the SDK that you run from command line that's in the code blocks I posted. If you run the command it will either give a result saying a device is detected or it won't show anything (no result) and you have an issue. If you have a driver issue then that's a whole other problem with a specific forum topic for, but I also assumed you unlocked your bootloader which would require you have fastboot and driver issue resolved.
Main cause of my snappiness is it says the requirement (first line of what you quoted) is unlocked bootloader and you are asking questions about rooting (step two after unlocking bootloader) didn't realize you were stuck in step 0, trying to figure out where to start.

gogul1 said:
I understand that and appreciate the explanation. I can work my laptop and I know that my laptop is 32bit or 64bit but it did not say at any point that it was referring to my computer. It just said download the 32 or 64 bit version. Well I have to make sure what they are talking about before I go and try to root my device as I like clarification on everything I do so that I get it right (and don't brick it). At the moment the explanations are all over the place, some info here, another bit there and was hoping somebody could link it all for me and make sense of the order in which I would do things. I have installed graphic cards in my laptop, put custom firmware on to ipods, psp's, computer etc but this is my first foray into android territory and would like to get it right. I am trying to follow a video tutorial but my computer's reaction to driver updates for the ADB/Fastboot drivers is telling me my drivers are up to date and I'm not getting the error message his is. This means I'm not sure where to go as the situation is diffferent s He is trying to get motochopper working for shield so it will root the device and hoped it would do the same for me.
Hopefully some clarification will come sooner rather than later but won't venture fourth until I'm absolutely sure of what needs to be done.
Again, thanks for the help it is appreciated.:laugh:
Click to expand...
Click to collapse
Download 64 bit software for 64 bit windows and 32 bit on 32 bit windows. Only notable exceptions are where a guide explicitly says to get 32 bit for some particular reason (in my case the only time I have come across this is MSI afterburners screen recording facilities only functioning on a 32 bit program for some reason, no 64 bit version) or if you are running 32 bit windows and physically cannot run 64 bit software even though a guide says "use 64 bit java etc etc".
rather interested in installing a graphics card in a laptop seeming as laptops use graphics cards that are soldered down to the motherboard not on a seperate removable card in all with very few (but existant) exceptions.... I think asus, dell and someone else did offer them at one point, its actually what the MXM connector was invented for (but its used for a few other things now instead).
Anyway. Its always good to have clarification. I think the post above me gives a few starting points and as always: google is your friend (so are bing and yahoo, but they are those friends where once you leave your job or school or whatever you probably wont ever see again).

boot achieved
I boot loaded the Shield through dab and boot loader.
Shield restarted once I chose to unlock the shield. I lost all my stuff (as expected) and it restarted. The drivers then reinstalled on my laptop.
I restarted my laptop and the shield again and tried to reinstall the drivers that were made for the ADB but sadly I get this message now...
"Windows has determined that your driver software is up to date MTP USB DEVICE"
So I restarted everything and the device is now showing up in the Andriod Device driver list.
I am using minimal adb and Fastboot application. It opens the command menu
I type in
adb reboot bootloader and I get the reply "error:device not found"
any ideas?
Sigh!

gogul1 said:
I boot loaded the Shield through dab and boot loader.
Shield restarted once I chose to unlock the shield. I lost all my stuff (as expected) and it restarted. The drivers then reinstalled on my laptop.
I restarted my laptop and the shield again and tried to reinstall the drivers that were made for the ADB but sadly I get this message now...
"Windows has determined that your driver software is up to date MTP USB DEVICE"
So the shield is now showing up in my computer manager under Portable Devices and not under the Android Devices like it did when I installed the custom drivers the first time.
Will this be an issue when I come to root?
Sigh!
Click to expand...
Click to collapse
the MTP driver is for plugging the shield in and viewing the file system. If the device isn't under android devices in device manager then you may need to reinstall the ADB drivers or just double check that the ADB can see the device (it may).
Open a command prompt. type "cd [path to the android sdk]\platform-tools"
Then type "adb devices".
It should list all the android devices it can make a debug connection to. If the Shield is in that list your good, otherwise don't proceed any further until you can rectify that.
The other solution is that you dont need ADB drivers on a linux system for some reason. Don't ask why. I havent a clue. But that would necessitate installing linux.
And something that is useful for finding the adb on the command line again in future for windows. You don't want to "cd" into the correct folder every time (the command line equivalent of opening folders). Sometimes you just want to be able to open the command prompt, type "adb devices" and it to just work. That's doable by altering your system PATH variable.
Open my computer. Right click > Properties, should open the System window.
Left side there should be a button saying "Advanced system settings".
It will open the "System Properties" window to the "Advanced" tab (if it isnt on that tab just switch).
Bottom of the window should be a button saying "Environment Variables...". Click it.
Now the window that appears will be split in 2. User variables and System variables. There is a PATH entry in both, it is best that you only change 1. If you are the only user or you only want your user to be able to access the adb, you can change the User variable. Otherwise you can change the system variable for the adb to work on all users. For me I had to add python to my path once but I wanted to do this for all users so I changed the system one, the PSP SDK I installed however altered the User variable by default. Make your choice and find the variable "PATH" in either one.
Click Edit. A window will appear with Variable name and Variable Value. At this point what I recommend doing is copying the entire contents of value into a notepad file and saving them as a backup. Then cancel and go back into it.
Code:
C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Lua\5.1;C:\Program Files (x86)\Lua\5.1\clibs;C:\Python27;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\
That is my Path variable.If you look the path variable is mostly a series of filepaths (or other variables too) which are seperated with ";". When you type a command such as "adb" into a command prompt what windows does is searches the current command prompt directory for a file it can execute which is called "adb" (it ignores extensions unless explicitly given one), if it doesnt find it in the current directory it searches each folder in the system path variable for the same executable (it ignores sub directories, it will only search the folders above on my system). So if we want to be able to type adb from any folder, we need the folder the adb is in to be added to the system path variable.
Simply add this to the end of it
Code:
;[whatever the path to the adb folder on your system is]
It will be whatever you had to add after "cd" to get to the adb earlier (must not leave out the C:\Users etc etc if its stored in your documents, cd will let you get away with ignoring that, the variable requires the FULL filepath).
Save the variable. Open a command prompt. Type adb, should work. If not, QUICKLY RESTORE THE BACKUP BEFORE WORKING OUT WHAT WENT WRONG. Should be safe with the broken variable to be fair, but you don't want to risk anything. If you dont think your going to use the adb often then simply dont bother updating the path variable rather than taking the (minimal) risk.
Wow my path variable is beginning to get a bit long now I only manually added python and lua to it. The rest will be the default entries and the SQL server stuff appears to be from installing visual studio. Yours probably wont match.

hehe you're going to hit me in a minute...
message deleted as I was being a moron....

ok I should be entirely clear as you guys are trying to help
ok I should be entirely clear as you guys are trying to help me so it's best i let you know what I have done up until this point.
Ok so I boot loader my shield.
I downloaded minimal ADB and Fastboot. I also downloaded the drivers you recommended in the forum.
I installed the drivers:
My shield showed up in the computer Manage list as a Portable device.
I chose to install the new drivers, it asked if I still wanted to go ahead as the drivers could not be verified and I said yes.
The drivers installed and the Shield changed from being in the portable list to showing up as an Android device.
Success I believe.
I then opened ADB BOOTLOADER and booted my Shield Manually.
I then typed in the relevant prompts in the command and a list of options showed up on the shield.
It showed my device number in the command prompt which was the one on my shield screen.
I then command the unlock function and the shield offered me the option to lock or unlock.
I chose Unlock and it then rebooted.
When it restarted, my computer reinstalled the device drivers and my shield had reset to factory settings (as it should).
I then looked in the Computer Manage list and my Shield had reverted back to being in the Portable Devices list.
I restarted both again and the Shield then showed up under Android Devices like it did when I installed the custom drivers the first time.
But the name of the device is Nvidia Shield - not Nvidia Shield ADB like in the tutorial video... not sure it that helps.
I enabled USB Debugging,
put the Superuser.apk and Su bin file into the minimal AADB and Bootloader folder.
I then put the Thor-insecure-boot.img in the Minimal ADB and Bootloader folder too.
I started up the command prompt from the minimal ADB and Bootloader.
I then saw this
C:\Program files <X86>\Minimal ADB and Fastboot>
I then typed in adb reboot boot loader and pressed enter
I got
error: device not found
So I decided to take the above advice and opened a command prompt
I typed in cd C:\tools\adt-bundle-windows-x86_64-20130729\sdk\platform-tools
and pressed enter:
It repeated what I typed and I then put in adb devices.
It then came back with:
List of Devices attached
but nothing was listed....
doh!

Progress!
Ok so I uninstalled my drivers to start again, plugged in the shield and it reinstalled my drivers and now under Android Devices it shows NVIDIA SHIELD ADB
Result!
Now I opened the dab cmd prompt
typed in
adb reboot fastboot
and it booted my shield! jolly good
But then I typed in
fastboot boot thor-insecure-boot.img
I then had
<waiting for device>
show up in the command window.
This is where it stayed.
On the screen of my shield I have options:
continue
restart bootloader
recovery mode
poweroff
Do I have to choose one of these in order for it to begin the thor img command?

C:\tools\adt-bundle-windows-x86_64-20130729\sdk\platform-tools Just incase you didnt get it earlier. That would be the path required for the variable change above. Just whack a ; on the end of the existing variable and throw that new path on the end and done.
But yes, adb devices not listing shield is not a good thing. Try reinstalling the ADB driver for the shield manually (you cant do it via device manager etc).

cool
I'm past that and now <waiting for device> problem to rectify. Am looking online now but there isn't much on there so far...
looking under device manager it shows up under Android Device as Nvidia Shield ADB but it also shows up under portable devices as SHIELD.
Whilst in boot mode the device only shows up in portable devices with a exclamation mark next to the device.
*UPDATE*
I uninstalled the portable device driver because I think it may have been causing confusion.
I then typed adb devices into CMD and a list of devices showed the serial number of the nvidia Shield.
I then typed in adb reboot bootloader in and it booted.
I then tried adb devices again and nothing showed up.
When I go into bootloader The Android Device: Nvidia Shield ADB driver disappears in manager once I go into bootloader mode. Is this normal?
Hmmmmmmm
definetly something to do with the drivers.
I'm on windows 7 64bit by the way.
Going back into device manager I noticed that there is another device under Other devices, upon looking at it it is Fastboot and has an exclamation mark in a yellow triangle next to it (Minimal dab and fast boot is open though).
Such a bummer as I'm so close yet so far

picture
ok so here is a pic of my devices list fastboot is there

before boot
This is the devices it can see before I put the shield in boot mode

devices seen after shielf in boot mode
the are the devices seen after I put the Shield in boot mode. It can't see any devices

waiting for devices
This is the screen on the shield in boot mode. The CMD screen says "Waiting for Devices"

How to unroot, lock bootloader and go back to stock?

For background, I have Verizon pixel 2 and am using a Mac.
I went down a massive rabbit hole last night reading through these forums and all the posts and was able to unlock bootloader, flash the January OTA and then root by doing the modified boot file with magisk. (interestingly enough the booting into recovery gives me red ! Over a dead Android and I could not load the OTA that way, nor did the adb sideload OTA comand work either, I had to push the extracted walleye img and then the zip file as discussed in one of the steps in some other thread here)
So anywho, in the end I now have a phone that gives me 2 errors when it reboots, one for unlocked bootloader and another for root telling me something is wrong with my phone and i should contact the manufacturer (which I read on here is normal), but my biggest issue is that my ADT alarm app doesn't work anymore (even if i check it off for hide in magisk). I feel like the root is just not worth it for me and I want to revert to completely stock image, even if it resets my phone and I have to re back everything up all over again like did when i had to do the unlocking of the boot loader.
So -- What are the steps I should take?
1)uninstall magisk from magisk manager?
2)delete magisk manager?
The above will unroot me, correct?
3)Do I push the stock boot image file onto the phone?
4) do I have to repush the latest OTA walleye image and zip file onto the phone again?
5) do I then do the adb reboot and do the flashing lock command (same command i did to unlock the boot loader) to lock up the bootloader and reset to stock?
If someone could be as explicit as possible in correctiong or validating my steps above it would be much, much appreciated.
I don't want to do any more unnecessary steps in flashing things than is needed so if I have extra steps above (perhaps 4 is not needed?) Let me know.
Thanks

Proceed with Caution
I am not an expert by any means, but can speak from personal experience. I was in the exact same situation as you. I followed the detailed steps to unlock the bootloader on my pixel 2, received similar issues, and the same prompt when the phone rebooted. All that to say proceed with caution.
My thoughts on questions 1 & 2: I personally wouldn't recommend you remove or delete magisk from the manager. When I did i had to reinstall it via twrp. My phone functioned fine, apart from the error at reboot.
My thoughts on questions 3 -5: When I followed the steps on XDA for your questions here I ended up bricking my Pixel 2 with locked bootloader from Verizon. Probably an error on my part, but wouldn't want someone else to go through the headache, hours of issues, and then an expensive paper weight.
My suggestion would be to:
1. Leave your phone as is and attempt to trouble shoot the app or apps you are having issue with
2. contact Google support on your phone and see if they would replace it
3. wait for an established method to unroot the pixel 2 here
Thankfully Google replaced my phone due to the error after rebooting, prior to me bricking it. I knew I had a replacement phone coming. So I attempted to go back to stock and that is when I messed it up.
Note sure this is exactly what you were looking for, but hope this helps you.

Dozens of posts with hundreds of pages on how to root but no advice on how to go back to stock cleanly?

iridium7777 said:
Dozens of posts with hundreds of pages on how to root but no advice on how to go back to stock cleanly?
Click to expand...
Click to collapse
Your version is Verizon which is making things more complicated. Generally when the bootloader is unlocked, you just hit flash-all.bat and then relock the phone. Given that the Verizon I'm not sure.
So you are on stock ROM with all these apks loaded ? If you go to settings, then do a factory data reset, you'll reset the phone back to stock and completely wipe the phone and return it to stock, at that point you can go into bootloader mode and relock.
Again your bootloader is unlocked, so the flash-all is your best option. If you see the red exclamation point with the error android laying on his back, you press power and up volume and toggle that and it will bring in the stock recovery which you can sideload the OTA however it may fail since you have magisk.
I bought my phone stock last year and have not rooted it or modified it in anyway. Too many problems and it only gets harder and harder as Google releases a new phone.

@mikeprius -- thank you for replying. after reading more on here, it seems like that's the way to go -- flash-all script, seems like i don't really need to do 1&2 that i wrote above as the flash-all will wipe that out by itself.
at that point i should be running the latest stock 8.1 but with an unlocked bootloader (and according boot up message screen) and i should be able to re-do the fastbook unlocking command to lock the phone back up.
(and yes, after reading even more now -- and i tried this yesterday -- i completely missed the portion about PWR + Vol Up button, that's why i think i had that issue, but still, i was able to push the update by pushing img and then the zip through).

iridium7777 said:
@mikeprius -- thank you for replying. after reading more on here, it seems like that's the way to go -- flash-all script, seems like i don't really need to do 1&2 that i wrote above as the flash-all will wipe that out by itself.
at that point i should be running the latest stock 8.1 but with an unlocked bootloader (and according boot up message screen) and i should be able to re-do the fastbook unlocking command to lock the phone back up.
(and yes, after reading even more now -- and i tried this yesterday -- i completely missed the portion about PWR + Vol Up button, that's why i think i had that issue, but still, i was able to push the update by pushing img and then the zip through).
Click to expand...
Click to collapse
If I were in your situation and the bootloader is unlocked, just use flash-all which has a wipe script then call it a day. I think trying to screw around even more is just a waste of time and I wouldn't even bother with the OTA, just erase and flash stock. You don't have to relock your bootloader if you don't want to, if you stay fully stock you may still be able to get OTA updates. I'm not sure if a bootloader locked is required someone can chime in as it has been awhile since I've done this, but over 1 yr ago, I just kept the bootloader unlocked, kept things stock and everything was good to go. Obviously there are security issues with an unlocked bootloader, but I'm sure you know this already

@mikeprius you keep saying reset/erase, do you suggest i re-set the phone and then flash the stock image?
i was just going to flash the stock image, i figured it already wipes the phone, and locking the bootloader would wipe it again, so what's the point of erasing all data prior?

Not to hijack this thread, but a question to add... I thought that there were kernels that would mask certain things to allow all of those apps to work, and get rid of the "problem with device" message.
Is that correct?

iridium7777 said:
@mikeprius you keep saying reset/erase, do you suggest i re-set the phone and then flash the stock image?
i was just going to flash the stock image, i figured it already wipes the phone, and locking the bootloader would wipe it again, so what's the point of erasing all data prior?
Click to expand...
Click to collapse
Just flash the stock images. It will auto reset.
Again, don't mess with anything just flash stock images, then go from there.
Also flash the newest version of the stock images out there. The pixel 2 will error if you try to downgrade any version.

here are all the steps to UNROOT and LOCK the boot loader on your Pixel 2 on a Mac (windblows users simply ignore all the "./" references).
1) download the latest ADB tools from google
2) download the latest factory Walleye image
3) unzip files from 1&2 into a common directory
4) edit flash-all.sh file and add "./" infront of every instance of "fastboot" in the script [windows users ignore this step]
5)hook up your phone to your computer in debug and file transfer mode. check that "./adb devices" loads your devide
6)type " ./adb reboot bootloader"
7) check that your device is still connected by typing "./fastboot devices"
8) type "./flash-all.sh"
===the script will run and your phone will be restored to stock, and UNROOTED. upon boot up skip through all of the setup steps and get to the phone settings as fast as you can. enable developer option, enable debug mode, set phone to data transfer ====
9) check that your phone is connect to your computer by "./adb devices"
10) type "./adb reboot bootloader"
11) check your devices is still connected by "./fastboot devices"
12) type "./fastboot flashing lock"
===== this will re-wipe your device again, you'll see the circle of death, and this will LOCK your boot loader back up again======
side note, feel free to skip over the steps where you check that your phone is still connected to the computer (./fastboot devices) if you're less paranoid and comfortable.

iridium7777 said:
here are all the steps to UNROOT and LOCK the boot loader on your Pixel 2 on a Mac (windblows users simply ignore all the "./" references).
1) download the latest ADB tools from google
2) download the latest factory Walleye image
3) unzip files from 1&2 into a common directory
4) edit flash-all.sh file and add "./" infront of every instance of "fastboot" in the script [windows users ignore this step]
5)hook up your phone to your computer in debug and file transfer mode. check that "./adb devices" loads your devide
6)type " ./adb reboot bootloader"
7) check that your device is still connected by typing "./fastboot devices"
8) type "./flash-all.sh"
===the script will run and your phone will be restored to stock, and UNROOTED. upon boot up skip through all of the setup steps and get to the phone settings as fast as you can. enable developer option, enable debug mode, set phone to data transfer ====
9) check that your phone is connect to your computer by "./adb devices"
10) type "./adb reboot bootloader"
11) check your devices is still connected by "./fastboot devices"
12) type "./fastboot flashing lock"
===== this will re-wipe your device again, you'll see the circle of death, and this will LOCK your boot loader back up again======
side note, feel free to skip over the steps where you check that your phone is still connected to the computer (./fastboot devices) if you're less paranoid and comfortable.
Click to expand...
Click to collapse
hey there. what is the command suppose to look like? every combination I try gives me an error:
first, I don't even enter the Fastboot command the same wayit given me an error:
Asads-MacBook:~ asad$ ./fastboot devices
-bash: ./fastboot: No such file or directory
so I try this: Asads-MacBook:~ asad$ fastboot devices
[serial #] fastboot
these are all the errors I get:
Asads-MacBook:~ asad$ cd /Users/asad/Desktop/walleye-opm1.171019.021
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: fastboot./: No such file or directory
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: ./fastboot: No such file or directory
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
fastboot: usage: unknown command ./flash
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: fastboot./: No such file or directory
...
how is the command suppose to look that I can edit it the right way?

"fastboot: No such file or directory" means that you didn't do step 1, step 3 on the file you didn't download, and there should probably be a "cd /<whatever the 'common directory'>" is. (I just created a directory named adb. That's good enough for me to know what it's for.)
You have to download adb and fastboot (which come in the adb tools file), unzip them to whatever directory you're going to use for flashing the phone, and cd to that directory.
Then, since you're evidently on MacOS, each command has to have ./ in front of it (that says "the current directory"). Try all that, then see what happens.

Rukbat said:
"fastboot: No such file or directory" means that you didn't do step 1, step 3 on the file you didn't download, and there should probably be a "cd /<whatever the 'common directory'>" is. (I just created a directory named adb. That's good enough for me to know what it's for.)
You have to download adb and fastboot (which come in the adb tools file), unzip them to whatever directory you're going to use for flashing the phone, and cd to that directory.
Then, since you're evidently on MacOS, each command has to have ./ in front of it (that says "the current directory"). Try all that, then see what happens.
Click to expand...
Click to collapse
yayy! that worked!
so i had adb and fastboot in a folder (platform-tools) and i had the factory image in its own seperate folder (walleye-files). i was making the cd; walleye folder and trying to flash-all.sh there.
so i had to put the files from the walleye folder into the platform-tools folder. Then I made platform-tools the cd. now when . i could now follow all the steps from 4-12 and got the pixel 2 the way it was OTB.
thanks!

Great! I'm not a Mac expert (last time I used one was the 128K Mac in 1985), so I'm not sure how to export a path in MacOs, so I gave you the complicated way, but you got it done anyway. (If you ever find out how to add the platform-tools folder to your path, you can leave adb and fastboot in there and keep the ROMs [walleye] in their own folder, cd to it and adb and fastboot will still work.)

[GUIDE] [SUPPORT] How to root, optimize, and repair Xiaomi Redmi Go.

The One-for-All Guide to rooting, improving, and fixing various errors in Xiaomi Redmi Go!Hello everyone! This thread that I made is for all people who wants to modify and gain full access, as well as to repair their Xiaomi Redmi Go devices the well-guided way, I've noticed that nobody has made an all-in-one guide for this phone so I decided to do it, this thread will keep on expanding depending on what I will discover about this phone, but for now, here is the thread, i expect that you have at least a little amount of knowledge when it comes to phones such as ADB and Developer Options.
What can we do with Xiaomi Redmi Go:
1. We can root it, and the best root manager for this phone is Magisk, SuperSU is also good, but if you're planning to use your phone for mobile banking, then Magisk is right for you. (Unfortunately this isn't true right now due to ctsProfile being hard to manipulate, Redmi Go supports hardware backed key attestation which means your device will definitely be not certified no matter what you do, so until we get a new method, don't root your phone if you want to use apps like Google Pay
2. TWRP is the current custom recovery available for this phone, it has flaws, but its currently the best out there, so its worth the shot to install it, the thread for it will guide you.
3. No custom kernels, people said that they have managed to install AOSP 9 and GSI on this device and made it boot up, but for me, it's better to wait for the official ROM update, after all, the device is still supported.
Prerequisites:
1. Xiaomi Redmi Go
2. An internet connection, a strong one is recommended if you want to download a ROM.
3. A computer with SDK Platform Tools ready to use, this is required, the link is here: https://developer.android.com/studio/releases/platform-tools
Don't forget to also get its driver! The link is also here: https://developer.android.com/studio/run/win-usb
The drivers are tricky to install but I will guide you on doing it in the easiest way possible, please continue on the thread.
4. SD card, your user data will be erased later, better back your files up, this is a warning.
5. Turning on "OEM unlocking" and USB Debugging in Developer Options, this is also really important!
Table of contents:
1. Unlocking the bootloader (and setting up ADB)
2. Rooting
3. Applying the custom recovery
4. Additional modifications
5. Stock ROM links
6. Bonus Section
WARNING: I am not responsible for anything that happens to your device as you follow my guide, do not blame me if you turned your device into a paperweight, made it explode, made it fly or whatever it may be, you chose to modify this phone and you should be accountable for it, you must know the consequences of what you're doing, try to point your finger at me because of what YOU did and I will laugh at you.
I am ready to assist though, so please feel free to ask some questions!
Let us begin, this will take several minutes, so please be patient and avoid rushing.
1. Unlocking the bootloader.
NOTE: This requires your computer to have SDK Platform Tools extracted to any location as long as its easy to access, and its really complicated to talk about it here, this step doesn't include the method where you request a code from Xiaomi, but I've provided a link for it.
A. First, get your phone up, and open the folder on where the SDK Platform Tools are placed, make sure that your in the directory where you see the .exe files of the SDK, now, hold Shift on the keyboard and click "Open Command Prompt here" and type "adb reboot bootloader", without quotes don't forget! This applies to all the steps that I will provide, don't forget to change the USB connection mode of your phone to PTP for it to be detected by ADB! (Only applies to Windows 8/8.1) Once your phone is asking for an authorization, check "Always allow this computer" then tap allow.
B. Once your device has been booted up into Fastboot or the bootloader, check first if your device is being detected, type "fastboot devices", if yes then proceed, if no, then stop here for now.
1B. If this happens then you may have to check your drivers and see if its installed correctly, once your device can be seen at "adb devices" it should also been seen in "fastboot devices" and when the phone is in adb sideload, if not then you have to reinstall ADB, get the proper drivers and do it again.
C. Now, type "fastboot oem unlock-go", the terminal will warn you that all of your user data will be removed, if you have them backed up then and go ahead and enter the command, if not, then just type "fastboot reboot" and start backing up your files, then do this again.
D. The phone will boot up and say "Erasing", to confirm that your phone has its bootloader unlocked, once it boots up again see if it says "Unlocked" on the bottom part of your screen, if there is then congratulations, it should be unlocked at this point.
1D. https://www.getdroidtips.com/unlock-bootloader-xiaomi-redmi-go/, this one particular link provides you on how to unlock the bootloader by entering a certain code, I believe this is a safer method but requires a bit of time, go here if you're interested.
NOTE: The phone supports the command "fastboot flashing unlock_critical" if you are going to unlock your phone with the normal command (fastboot oem unlock_go/fastboot flashing unlock), consider using this 2nd command too, what it does is that it allows you to also flash partitions you supposedly don't have access to, just be very careful not to flash any wrong file! It will be useful to make the "flash_all.bat" script work that you can find on the fastboot ROM for this device, more below!
Once your bootloader has been unlocked, you can now proceed to the other steps that I provided here, don't forget to enable USB Debugging on your Developer Options.
1.2 Setting up ADB
1. Grab your phone, unlock and open your Developer Options then enable "USB Debugging", then change your connection type to "PTP" if you are using Windows 8/8.1, I am not sure if this is required on 7, but it is not needed on Windows 10.
2. Go to this link: https://developer.android.com/studio/releases/platform-tools and download the .zip file, then extract it to a location that is easy to access, like your desktop.
3. Get the official Google drivers here: https://developer.android.com/studio/run/win-usb download the .zip file as well, and extract it too.
4. Go to the extracted folder of your SDK Platform Tools, and go to the directory where you can see various .exe files such as "adb.exe", now, hold the Shift key then click the Right mouse button, then click "Open command prompt here" If this doesn't work for you, open up CMD with admin rights, then type in cd *the location of your platform tools* say on mine, I will input cd C:\Users\James\Downloads\platform-tools_r31.0.3-windows\platform-tools then enter
5. Open your Device Manager by pressing Windows + R, put "devmgmt.msc" without any quotes then Enter, do not close the Device Manager until you're done with all the steps! And please be fast here too or else ADB will not work, now go to your extracted folder of the Google USB driver, and look for the file "android_winusb.inf", copy the location path of it as you will need the exact location path of the file later, in my case it was "C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\android_winusb.inf".
4A. There are 3 main ADB devices that you have to install, Android ADB Interface, Android Bootloader Interface and Android Composite ADB Interface, so I will divide this into 3 sections, have your Device Manager, and the exact location of the .inf.
NOTE: Turn off the internet connection of your computer, why? Because, if you let Windows install the drivers for you, the drivers may be incorrect and will break things apart, as we will encounter several "Unknown devices" in the Device Manager and we have to update them with the extracted files from Google.
Android ADB Interface
1. Now, make sure that USB Debugging is enabled, now plug in your phone and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
2. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
NOTE: If you plug your phone and there is no "Android" device with exclamation mark, you can proceed to try and see if adb detects your device by typing "adb devices" in the command right now, it should be since this is what I experienced when setting up my device in Windows 10, this step usually applies only if you are using Windows 8/8.1
Android Bootloader Interface
1. To test, go to the command prompt you opened earlier, and type "adb devices", the device should now be detected at this point, when it does, type "adb reboot bootloader".
2. Now, make sure USB Debugging is enabled on the device before booting it into bootloader, now plug in your phone again and let the drivers install WHILE your computer is offline, Go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Bootloader Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
Android Composite ADB Interface
1. Before proceeding, type "fastboot devices", the device should now also be detected on fastboot, now, type "fastboot reboot", and afterwards, enable "USB Debugging" on the Developer Options, then go your command prompt, then type "adb reboot recovery".
2. Now, now plug in your phone again and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Composite ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
2. Applying the recovery/custom recovery
A. Open up your phone and ensure that USB Debugging has been enabled, now, open up your command prompt just like in Step 1 in Unlocking the Bootloader and type "adb reboot bootloader"
B. Next up, type "fastboot flash recovery path/to/recovery.img", substitute the path/to/ with the actual location of your recovery, and please make sure that the name of the image is "recovery.img"! Or else it will not overwrite/update the recovery, you can also put your recovery.img directly within the platform-tools folder so that all you have to type is "fastboot flash recovery recovery.img" then press enter.
C. Once your done, reboot the phone and press Volume Up + Power at the same time, and the recovery will start. (You may want to do this else the recovery will be automatically removed and replaced with the stock one)
1C. For the stock recovery, once you press the combination, the phone will say "No command", at this point, hold your Power button and press Volume up one time to get into recovery.
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282 here is the link of the TWRP recovery, I encourage you to follow the steps mentioned in the post properly.
WARNING: The fix I provided below is now pushed here for 1 certain reason, before you try to root your phone and do everything else, you must decrypt your internal storage first and it is quite easy, first you must get the decrypt.zip linked in this thread (if the .zip cannot be found, I still have a copy of it), go to TWRP and do "format data", not Wipe Data! How so? Once you reboot to TWRP, it will show you the "Wipe" button, tap that, then the "Format Data" button should show up, this will require you to type in "yes" so type it in, then once it is done formatting, go back to the main TWRP screen, tap "Reboot", then "Reboot to Recovery", afterwards you must go to "Install" then proceed to install the "decrypt.zip", after that you can now flash .zip files from your internal storage too, but beware that you must do this every time you update your device!
3. Rooting your phone
A. To get started, install TWRP for your phone first.
B. Get the .zip file of Magisk/SuperSU so you can install them, the links are https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 and https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
C. Reboot your phone to recovery or just plug it in, open the command prompt again just like in the previous step and put "adb reboot recovery" without quotes.
D. Tap "Install" on your TWRP recovery and select the respective installation .zip file of your chosen root management app, and wait for it to finish.
1D. The .zip for both SuperSU and Magisk can be installed through "adb sideload", if incase you don't have an SD card! It may also work with fastboot as well but I need someone to confirm this.
E. When it's done, wipe the cache first, then reboot.
1E. If the root management app didn't appear in your phone after boot, just install the APK of it in the Play Store and check if root has been applied, if not, repeat step C and D again.
BONUS: It may be useful also to grab EdXposed or LSposed for Magisk and the link is here: https://forum.xda-developers.com/t/...or-of-xposed-oreo-pie-q-r-2020-07-19.4070199/ and here: https://forum.xda-developers.com/t/...e-magisk-module-edxposed-alternative.4228973/, please choose only one! You will use the normal Xposed if you're using a different root management app such as SuperSU, the link is here: https://forum.xda-developers.com/showthread.php?t=3034811
What this does is that if the app is an Xposed/EdXposed/LSposed framework module, any modifications it does to your phone will be based on memory only, it won't modify your phone directly which means your device will be clean, and if it incase the said modification bricks your phone, you can easily recover from it too!
BONUS 2: I also recommend getting the Busybox module from Magisk itself, it can easily be downloaded from the Magisk app, you will need this module if you want your root applications to work more efficiently and avoid errors, as most of them requires Busybox to work, don't use the Busybox installer apps on Play Store as they modify /system directly, only use it if you are using SuperSU.
4. Additional modifications
Once you've managed to root your phone and everything else, what I recommend you could do with your device is to get the following apps:
Titanium Backup - It has the ability to back up apps on your phone, and even its data! this app could do so much more than with what I just mentioned.
LSpeed - A root boosting app that has almost every root tweak packed into it, its really convenient to use! I do not recommend using Entropy tweaks as I heard it is a placebo.
Greenify - For me, this is the only legit battery saving app aside from LSpeed which also offers tons of battery saving features, it requires Xposed to have more options you have to buy it to gain full functionality
ROM Toolbox - This app pretty much contains everything a rooted user needs, such as a terminal and root-based file manager.
System app uninstaller (optional) - Just in case if you're planning to remove some bloatware (the list of it is below)
Root Browser - An alternative to ROM Toolbox, this root explorer is really popular and gets the job done without any interruptions.
Terminal emulator - This will allow you to enter various commands on your phone, like being able to reboot the phone without using any keys.
In order to make the phone as fluid as possible, just leave it with stock ROM installed, try to also use lite apps like Facebook Lite to reduce RAM and battery consumption.
Kernel Adiutor - Another great root application, it's like LSpeed but it doesn't automate tweaks, it instead allows you to modify most of it on your own, then it reapplies your tweaks every time your cellphone will boot up if you tap the "Apply on startup" switch. the link for the app is here: https://m.apkpure.com/kernel-adiutor-root/com.grarak.kerneladiutor
NOTE: Most of these apps can be found on the Play Store, and please don't install any more similar root boosting apps such as HEBF, scripts such as V6 Supercharger, or modifying files like build.prop, it is due to the fact that this will conflict with LSpeed, as LSpeed contains most of the tweaks that past scripts and apps provide, this will result in your phone slowing down a lot, Greenify will require Xposed Framework which is mentioned above on the Rooting section, the link to LSpeed is here https://github.com/Paget96/LSpeed, because the app has been removed from Play Store.
WARNING: The perf.zip https://forum.xda-developers.com/android/development/-t3935220 here, that was provided in Xiaomi Redmi Go forum section must be applied with extreme caution, you have to make a backup of your build.prop in /system, and build.prop + default.prop in /vendor for easy recovery, you can use ZipMe to easily make a backup for these files.
5. Stock ROM links
https://xiaomirom.com/en/rom/redmi-go-tiare-global-fastboot-recovery-rom/, this link so far provides all the ROMs (both recovery and fastboot) available for download on this phone, and they are actually light enough, so it will be easy to download them.
https://xiaomifirmwareupdater.com/archive/miui/tiare/ a new link I've found recently, this rom contains the .tgz format of the latest ROM for the Xiaomi Redmi Go, which could be used for fastboot and Mi Flash Tool, just search for the model and go for Global.
NOTE: Most of the ROMs for this phone provided on several sites, even on the actual Xiaomi website, has an invalid format of .zip, and doesn't contain a flashall script, as a result, Mi Flash Tool will never be able to use these ROMs, you could not also use adb sideload and fastboot for these ROMs, only the stock recovery of the phone could install the ROM, due to the links provided above finally giving the latest ROM versions for the phone, extracting the stock recovery is very easy now, you can do it yourself but if you need a link, tell me.
5A. Applying the stock ROM
This section will be divided into 2 sections, flashing the ROM through recovery, flashing the ROM through fastboot manually, or automatically with flash_all.bat
Stock recovery method.
A. Download the stock ROM with .zip format and put it into your SD Card.
B. Flash your recovery back to stock with the steps given above, boot into your stock recovery, then using your Power button and volume keys to navigate, select "Apply update from SD card".
C. Select the .zip file and wait for the update to finish.
D. The device will boot up automatically after, if not, just go back to the main menu of the recovery and select "Reboot system", enjoy!
Fastboot manual flashing method.
A. Ensure that you have prepared your device and computer for ADB, now grab the ROM given in this thread in .tgz format, and keep extracting the file until you see the files such as "flash-all.sh" after extraction, as you need to extract the .tgz ROM two times before you could use it properly.
B. Now go to the extracted folder of the stock ROM, go the "images" folder and copy the following image files: boot.img, system.img, recovery.img (make a backup of this file somewhere!), vendor.img, cache.img, userdata.img, persist.img, and splash.img.
C. Paste them to the extracted folder of your SDK Platform Tools where various .exe files are located such as "adb.exe", or in my case the location is "C:\Users\Symphony\Downloads\platform-tools_r29.0.4-windows\platform-tools".
D. Now open your command prompt on this directory, or Shift + Right click, then plug in your phone, now type "adb reboot bootloader" so your phone will go to bootloader, don't forget to enable "USB Debugging" and PTP connection mode before rebooting! (only applies to Windows 8/8.1, it may vary on Windows 7 but it is different on 10, no need for PTP connection mode, you can just turn on USB debugging and that's all)
E. Now, this is a little tricky, but try to follow me as much as you can, make sure first that you are detected with "fastboot devices", input the following commands that I will give so you can flash the ROM to your phone, now go to the command prompt and:
To flash the boot.img to your phone, put the command: "fastboot flash boot boot.img"
For the recovery, the command is: "fastboot flash recovery recovery.img"
For the system or main OS: "fastboot flash system system.img"
For cache: "fastboot flash cache cache.img"
For persist: "fastboot flash persist persist.img"
For the vendor or additional system files: "fastboot flash vendor vendor.img"
For data or apps: "fastboot flash userdata userdata.img"
For splash or probably boot animation: "fastboot flash splash splash.img"
D. After that, type "fastboot reboot", and enjoy!
Fastboot automatic flashing method (NEW!)
A. Extract the fastboot ROM 2 times as instructed, after getting the files, grab all the files and copy it to the directory of your platform tools where files such as "adb.exe" can be found, just copy all the files in there and that's all you have to do.
B. Open the "flash_all.bat" on Notepad and remove the following lines:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || exit /B 1
Afterwards, save the .bat file, that should be ready to use now
C. As instructed above, you must also do "fastboot flashing unlock_critical" after unlocking your bootloader the normal way, this will act as your 2nd unlock command, without this, the flash_all.bat will not work as it should be.
D. Boot up your phone in fastboot mode, open up your adb devices and make sure that your phone is seen in "fastboot devices", once it does, type in "flash_all.bat" without any quotes and execute it, the command will now automatically flash everything without you doing anything else, it will also automatically reboot after doing so.
Bonus section:
1. TWRP-compatible stock ROM
For this part, in order for you to generate a TWRP-flashable stock ROM is by basically making it yourself, you have to make sure that your patch is latest, and its pretty much a good idea to just tick everything in the backup selection except for the recovery, as well as the cache as you don't need those.
Once you have it, go ahead and keep it somewhere safe but easy to find, so if case that you need to use it, you could get it immediately, this is extremely useful so please just do it, as of now, I've confirmed that only the /data backup was usable, but please try to confirm if other partition backups are working for you.
Certain custom ROMs that can boot up in this device could be flashed through TWRP though, and the links of them are provided here in this thread.
2. GSI, AOSP 9 and custom ROMs
The link for AOSP is provided here: https://forum.xda-developers.com/android/development/redmi-aosp-9-t3922192
The link for GSI is right here: https://forum.xda-developers.com/android/general/tested-gsi-redmi-t3924705
These images/ROMs can be applied with TWRP, just make sure to follow the steps mentioned in these posts to avoid inconvenience, don't forget to take precautions too! I haven't tried them, but so far I believe that these are stable to use.
There are also custom ROMs released for the device but I am lazy to link all of them, they can easily be found by going here: https://forum.xda-developers.com/tags/xiaomi-redmi-go/
Please take note that I haven't tested these custom ROMs yet and I most likely never will, since the stock ROM for the device is already good enough, you can comment here and tell me what custom ROMs are stable so I can link them here for future reference.
3. Current status
My phone is still working, yes! and it's still staying strong, updated to 2.25 using the fastboot method and it is still fast, the only issue currently is that SafetyNet is a lot more secure than before, so it will be impossible to use stuff like Google Pay for now.
I usually decided to lay low and just stay with my LSpeed, Kernel Adiutor and Greenify, all I had to do is to tinker with these apps and my phone just reached into a whole new level! The performance improvement is nice, that I didn't need to use a custom ROM anymore.
4. How to install a OTA update after rooting your device
Due to the changes made by Google on SafetyNet, and the fact that this device will always require you to wipe the device every update, it is pretty much the same, it doesn't matter anymore if you are certified or not, you will still receive an OTA update even if your device is not certified as long as you are using the stock ROM, you only won't be able to install it, and if you want to install the OTA update you must install it by flashing the updated fastboot ROM, I have links for it above, you can try installing the OTA updates yourself through the settings but you will still have to do a factory reset anyway, you have to also unroot also and revert to stock recovery, else the installation will fail, and your device may slower afterwards.
5. Bloatware you can safely remove (NEW!)
So, like I said above, as much as how lightweight the device is, there are still bloatware that you can remove if you really want, but it's only 3 of them:
Mi Video
Mint Browser
Mi Music
The rest such as Mi Share and Mint Launcher are also bloatware, you can remove them but to me they are useful so I didn't, do not remove the "Cleaner" app, if it however says something like "com.CleanMaster", you can try removing it but take caution as your Play Store may be removed along with it too.
Credits to everyone who made the apps/tools that I mentioned here! such as @topjohnwu for the Magisk, and @YasiR Siddiqui for the TWRP, @Paget96 for the awesome LSpeed app, @rovo89 for the Xposed Framework and many more, you guys totally rock!

Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
Can you please elaborate all of what you've done so far? I will also ask you a few questions.
1. Is your phone usable with the platform tools? I mean with adb and such.
2. Did you try going into recovery and flashing stock ROM through there?
3. Is your phone being detected by "fastboot devices"? The fastboot mode of Redmi Go is its download mode, and i've provided the link for the stock ROM that's usable thru fastboot mode, as well as on how to apply it.

My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
TheAngryGuitarist said:
My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.
Click to expand...
Click to collapse
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.

_XblackshadowX_ said:
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.
Click to expand...
Click to collapse
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community! ?

TheAngryGuitarist said:
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community!
Click to expand...
Click to collapse
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.

_XblackshadowX_ said:
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.
Click to expand...
Click to collapse
I'm not really sure if a malware caused this issue or a failed system update over-night.

TheAngryGuitarist said:
I'm not really sure if a malware caused this issue or a failed system update over-night.
Click to expand...
Click to collapse
I usually had failed system updates numerous times because when i install them, the phone has already been modified by a lot, and that's actually riskier.
That's why i recommend unrooting and putting back the stock recovery before updating first, still works on mine even with "Device is not certified" by Play Store.

The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282

I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?

_XblackshadowX_ said:
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?
Click to expand...
Click to collapse
Yeah, I've done everything you told, I also turned the connection mode to PTP also. Somehow it just not showing that android with an exclamation mark.
after that, I even tried to use the 15-second ADB installer. after installing that I tried to flash recovery but that just didn't do anything. After using that flashing command, I had the same stock recovery.
I'm really thankful you took the time to answer my question.

Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.

I am not able to flash TWRP on my redmi go

How to update the redmi go to the latest version without formatting/Factory Reset should I just follow Fastboot flashing method and if so which files should I just flash. Thank you

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Hi! sorry for the late reply, if this is the case then it's fine, you can just connect the device, open up adb tools, type adb devices and ensure that your USB debugging is on, and the device will connect immediately, at that point all you need is the adb driver for Fastboot

akki_007 said:
Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.
Click to expand...
Click to collapse
oh no, but why lock your bootloader? you can try using a recovery ROM, you must have a spare SD Card within you, grab a recovery ROM, put it in your sd card then put it into the phone and use it on stock recovery, you should be able to apply it and boot back into the system, please update me

igpraan said:
I am not able to flash TWRP on my redmi go
Click to expand...
Click to collapse
you must have unlocked bootloader if you want to do so.

niknah said:
The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282
Click to expand...
Click to collapse
that's strange, the TWRP I linked isn't giving me any vertical lines

January images

The factory images are up my friends. Go pick what you need :good:
https://support.google.com/pixelphone/thread/24852169?hl=en
Added bonus: Here is a link to the January stock boot and magisk patched boot.img's
This is for the global build #QQ1B.200105.004 :good:
https://drive.google.com/file/d/1Dgh7w0r4ZzPZ7qOePhfADjPuLp-K84yO/view?usp=drivesdk
PS: I used stable magisk 20.2 to patch the boot.img

Dey Up Bruv...
Im downloading mine already <3

OTA is only 12MB.

Only 1st january, not 5th?

can confirm Jan update works with magisk root and ed_xposed. Thanks for updating us with the update availability!

Badger50 said:
The factory images are up my friends. Go pick what you need :good:
https://support.google.com/pixelphone/thread/24852169?hl=en
Added bonus: Here is a link to the January stock boot and magisk patched boot.img's
This is for the global build #QQ1B.200105.004 :good:
https://drive.google.com/file/d/1Dgh7w0r4ZzPZ7qOePhfADjPuLp-K84yO/view?usp=drivesdk
PS: I used stable magisk 20.2 to patch the boot.img
Click to expand...
Click to collapse
Hi, and thx.
But can u share a small how-to, for updating, step by step? Just wanna be sure that I on the right way.

lapapunk said:
Hi, and thx.
But can u share a small how-to, for updating, step by step? Just wanna be sure that I on the right way.
Click to expand...
Click to collapse
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.6. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt {See 6A} on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
6A. For Win 10 users. Open a command prompt by typing "cmd" in the search box, then open the prompt. You'll see C:\Users\<your name> with the flashing cursor. Then type "cd" then hit the space bar. Then drag and drop your completed platform-tools folder in the command line, and let it populate. Then hit enter, and now you can issue your fastboot commands :good:
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!

When doing the above flashing use an A to C, not the supplied cable. If you're already in a flash failure with the supplied cable grab an A to C and flash again without doing a factory reset or taking any other actions to try and get it up; this will usually get it booting as if the first flash was successful.
Edit... I know you would have put it in there if you'd remembered Badg, it's hard to remember every little speed bump when whipping up a set of instructions like that.

@Badger50
Ok, thx.
But what about this guide? On my pixel 2xl this method worked great. Will it work on 4xl?

Badger50 said:
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.5. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!
Click to expand...
Click to collapse
You're an absolute legend mate, thanks!!

lapapunk said:
@Badger50
Ok, thx.
But what about this guide? On my pixel 2xl this method worked great. Will it work on 4xl?
Click to expand...
Click to collapse
Nothing wrong with that either. It was written by Mr. Magisk himself. However, that is mostly for OTA's that I never use. I prefer updating by factory images :good:

krabman said:
When doing the above flashing use an A to C, not the supplied cable. If you're already in a flash failure with the supplied cable grab an A to C and flash again without doing a factory reset or taking any other actions to try and get it up; this will usually get it booting as if the first flash was successful.
Edit... I know you would have put it in there if you'd remembered Badg, it's hard to remember every little speed bump when whipping up a set of instructions like that.
Click to expand...
Click to collapse
Many thanks for reminding me of probably the biggest bug-a-boo problem plaguing the pixel line when it comes to updating or data transfer. Which is why I have several different cables! The P2XL was a great teacher for sure :good:

Do we flash global for TMobile?

Some_Ghost said:
Do we flash global for TMobile?
Click to expand...
Click to collapse
According to Google....yes :good:

After the January update, I no longer have call screening (automatic or otherwise). Not sure if related to being a GSuite user or not. Ugh...

Badger50 said:
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.5. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!
Click to expand...
Click to collapse
you are a great help and i wish i could take you out for a beer or 5

Badger50 said:
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.5. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!
Click to expand...
Click to collapse
What should I do when the cmd window comes to "fastboot: error: failed to extract 'android-info.txt': iteration ended" as shown in the attachment.
And the process stops.

howardfok said:
What should I do when the cmd window comes to "fastboot: error: failed to extract 'android-info.txt': iteration ended" as shown in the attachment.
And the process stops.
Click to expand...
Click to collapse
Hard to say exactly since i've never seen that error. Did you follow my guide to the letter?
Is this the first time this has happened?
Are you using power shell commands?
Are your platform-tools up to date?
Have you tied different USB A to USB C cables and ports?
More info would be helpful :good:

Badger50 said:
Hard to say exactly since i've never seen that error. Did you follow my guide to the letter?
Is this the first time this has happened?
Are you using power shell commands?
Are your platform-tools up to date?
Have you tied different USB A to USB C cables and ports?
More info would be helpful :good:
Click to expand...
Click to collapse
Yes, I followed your guide and the cmd window worded well at the previous procedure and showed several [ok] but stuck at this point.
I doubled clicked 'flash-all.bat' file rather than used power shell.
The platform-tools is up to date since it was downloaded today.
I have not tried another cable. The cable may work well because I used this to unlock bootloader and root the device last month.
BTW, should I re-zip the replaced boot.img (Patch from Magisk) and other .img files (from the full image) to get a new zip file before flashing?

howardfok said:
Yes, I followed your guide and the cmd window worded well at the previous procedure and showed several [ok] but stuck at this point.
I doubled clicked 'flash-all.bat' file rather than used power shell.
The platform-tools is up to date since it was downloaded today.
I have not tried another cable. The cable may work well because I used this to unlock bootloader and root the device last month.
BTW, should I re-zip the replaced boot.img (Patch from Magisk) and other .img files (from the full image) to get a new zip file before flashing?
Click to expand...
Click to collapse
I would try a different cable and port first.
Don't worry about the patched boot.img until you have a successful flash of the factory image, and your phone boots up first. The secondary image.zip within the factory image definitely needs to remain zipped and in your platform-tools tools folder. The installation script needs to extract it so it can be flashed. This may be why your getting the error if this is the case.

Question [SOLVED] "Pixel Is Starting"

Soft-Bricked my phone this morning flashing a Substratum Theme. Don't ask, I don't know why but it did.
Did a factory reset, Pixel Flasher, set up Magisk, rebooted - got Pixel is Starting. - couldn't get out of it and this was AFTER I recopied all my stuff back over form the last update I had on my Computer and Swift/Google Backups.
Factory reset, same thing happened while doing a reboot at some point int he process.
THIRD Factory reset, got everything done, restored, up and running, just did a reboot and it's back.WTF?? And how do I get out if this?

How are you factory resetting the device?
Also, perhaps something that you are restoring is causing the boot issue. You shouldn't restore data from Swift Backup immediately after fully re-imaging your phone - if that is part of what you are doing.

NippleSauce said:
How are you factory resetting the device?
Also, perhaps something that you are restoring is causing the boot issue. You shouldn't restore data from Swift Backup immediately after fully re-imaging your phone - if that is part of what you are doing.
Click to expand...
Click to collapse
No, I’m doing the factory reset in recovery. Then when the phone booths up just going through the bare minimum of settings to get to the home screen so I can flash the newest update and get routed. Since it’s a factory update and I need to disable verity and verification I have to wipe again anyway and then I go through the whole set up process, let google restore all my apps and stuff and then I use swift back up to restore my apps and data.
I wonder if when I do my back up from Swift I should just do data instead of letting the apps overwrite them selves

Searching online it looks like I can still connect with ADB. I’ll see if I can use the flashing tool and maybe re-flash without wiping

Ahh, gotcha. You can try what you said but I would also suggest re-imaging your phone with the matching factory image that you are currently running. You can do a proper, full re-image through recovery without wiping your phone.

NippleSauce said:
Ahh, gotcha. You can try what you said but I would also suggest re-imaging your phone with the matching factory image that you are currently running. You can do a proper, full re-image through recovery without wiping your phone.
Click to expand...
Click to collapse
How do I do that?

HipKat said:
How do I do that?
Click to expand...
Click to collapse
A lot of commands lol. I will update this comment in just a moment once I head over to my desktop. Typing this out on my phone would be a real disaster, haha.
Alrighty! Here is that update:
1. Ensure that you have the latest version of platform-tools somewhere on your hard drive. Also ensure that your phone has ADB enabled - which you said yours has enabled already - so you should be all good there.
2. Download the correct, most updated factory image here:
--> https://developers.google.com/android/images
3. Extract the contents of the factory image into your platform-tools folder. If you want to root, also be sure to extract the init_boot.img from image.zip file that is inside of the main factory image zip file.
4. Right-click and edit the flash-all.bat file and remove the "-w" near the bottom of the document. "-w" means "wipe". Make sure to save the document after making this change.
5. Copy the directory of your platform-tools folder.
6. Open CMD as an administrator.
7. In CMD, change directories to your platform-tools folder. The command is:
cd DirectoryLocationYouCopiedGoesHere
8. Connect your phone to your PC over USB.
9. In CMD once it is navigated to the platform-tools folder (which should also contain the extracted factory image files at this point), type the following commands:
adb reboot-bootloader
**This will reboot your phone into the bootloader**
flash-all
**This will run the flash-all.bat script which will re-image your phone with the downloaded factory image. It will not wipe your phone if you remembered to remove the "-w" line as mentioned above. Also, DO NOT interact with your phone while this command is running. It will automatically boot itself once it is done - which can take up to 5-10 minutes.
10. You can probably do the rest on your own from this point. But the basis of what comes next would be installing Magisk, copying the init_boot.img over to your phone, patching it in Magisk, copying the patched init_boot.img back over to your computer, booting your phone into recovery mode once again (via CMD) and then running the following command in CMD as admin:
fastboot flash init_boot MagiskPatchedInitBootFileNameGoesHere.img
**This will flash the patched init_boot.img file**
Then use this command:
fastboot reboot
**That will take your phone out of recovery and cause it to boot normally**.
I actually have to run to a birthday party right now so I can't write any more specific details. If you don't feel comfortable doing this all, please let me know. If that's the case, I'll make a video showing how to do this tomorrow or something, haha.

NippleSauce said:
A lot of commands lol. I will update this comment in just a moment once I head over to my desktop. Typing this out on my phone would be a real disaster, haha.
Click to expand...
Click to collapse
Lol,I’m hip

NippleSauce said:
A lot of commands lol. I will update this comment in just a moment once I head over to my desktop. Typing this out on my phone would be a real disaster, haha.
Alrighty! Here is that update:
1. Ensure that you have the latest version of platform-tools somewhere on your hard drive. Also ensure that your phone has ADB enabled - which you said yours has enabled already - so you should be all good there.
2. Download the correct, most updated factory image here:
--> https://developers.google.com/android/images
3. Extract the contents of the factory image into your platform-tools folder. If you want to root, also be sure to extract the init_boot.img from image.zip file that is inside of the main factory image zip file.
4. Right-click and edit the flash-all.bat file and remove the "-w" near the bottom of the document. "-w" means "wipe". Make sure to save the document after making this change.
5. Copy the directory of your platform-tools folder.
6. Open CMD as an administrator.
7. In CMD, change directories to your platform-tools folder. The command is:
cd DirectoryLocationYouCopiedGoesHere
8. Connect your phone to your PC over USB.
9. In CMD once it is navigated to the platform-tools folder (which should also contain the extracted factory image files at this point), type the following commands:
adb reboot-bootloader
**This will reboot your phone into the bootloader**
flash-all
**This will run the flash-all.bat script which will re-image your phone with the downloaded factory image. It will not wipe your phone if you remembered to remove the "-w" line as mentioned above. Also, DO NOT interact with your phone while this command is running. It will automatically boot itself once it is done - which can take up to 5-10 minutes.
10. You can probably do the rest on your own from this point. But the basis of what comes next would be installing Magisk, copying the init_boot.img over to your phone, patching it in Magisk, copying the patched init_boot.img back over to your computer, booting your phone into recovery mode once again (via CMD) and then running the following command in CMD as admin:
fastboot flash init_boot MagiskPatchedInitBootFileNameGoesHere.img
**This will flash the patched init_boot.img file**
Then use this command:
fastboot reboot
**That will take your phone out of recovery and cause it to boot normally**.
I actually have to run to a birthday party right now so I can't write any more specific details. If you don't feel comfortable doing this all, please let me know. If that's the case, I'll make a video showing how to do this tomorrow or something, haha.
Click to expand...
Click to collapse
Flashing now. For future reference, in CMD, you need to run adb kill-server, then adb-devices before rebooting to bootloader (I'm not a TOTAL ADB noob lol). In my case, none were found so I just disconnected and reconnected the USB from the phone and it found it.
Also, Pixel Flasher was not able to work in Recovery or in the Pixel Is Starting state, which shows up on the tool as ADB - probably not rooted.
I'll update when it's done

Grrrr, no luck. Right back to Pixel is Starting.
Back to the hard way

HipKat said:
Grrrr, no luck. Right back to Pixel is Starting.
Back to the hard way
Click to expand...
Click to collapse
When you're on this screen, normally it's a launcher thing. Have you flashed any mods for launchers?
If you're still able to access your settings through the notification bar, you should be able to go to apps in your settings and open the Play Store to temporarily download another launcher. This will at least allow you to get some usage from your phone.

Curiousn00b said:
When you're on this screen, normally it's a launcher thing. Have you flashed any mods for launchers?
If you're still able to access your settings through the notification bar, you should be able to go to apps in your settings and open the Play Store to temporarily download another launcher. This will at least allow you to get some usage from your phone.
Click to expand...
Click to collapse
It's an encryption thing with the unlock method, pin, fingerprint, etc form everything I've read, and I read a lot and no one has been able to get past it without a wipe. I've used Nova Pro with the same settings over many devices
You can't get to apps. You can get to settings but if you select Apps and try to open an app, the only options are Uninstall and Force Stop

It's in the data on the Swift Restore. Everything is good after restoring Google Backup, and Swift missing Apps. I restored only data on system apps and user apps and the next reboot gave me this error. I wonder if I should NOT restore system data... I almost didn't just to see what happened, but I would have anyway

Confirmed, not restoring System Data was the fix. Funny, I have restored Sys Data Twice before today....

HipKat said:
Flashing now. For future reference, in CMD, you need to run adb kill-server, then adb-devices before rebooting to bootloader (I'm not a TOTAL ADB noob lol). In my case, none were found so I just disconnected and reconnected the USB from the phone and it found it.
Click to expand...
Click to collapse
In adb you do not have to run those commands. Adb devices would just let you check if an adb enabled device is connected. Adb kill-server only needs to be run if you had already used adb commands with your connected device, disconnected it and then reconnected it. That would kill the originally established and utilized adb connection which would then allow you to establish another one - which I suppose I should have mentioned considering you had tried things over adb prior to my comment, haha. My apologies.
But regardless, I'm glad that you got it working again! So it was that Swift Backup restore after all? That is good to know. Awesome stuff.

NippleSauce said:
In adb you do not have to run those commands. Adb devices would just let you check if an adb enabled device is connected. Adb kill-server only needs to be run if you had already used adb commands with your connected device, disconnected it and then reconnected it. That would kill the originally established and utilized adb connection which would then allow you to establish another one - which I suppose I should have mentioned considering you had tried things over adb prior to my comment, haha. My apologies.
But regardless, I'm glad that you got it working again! So it was that Swift Backup restore after all? That is good to know. Awesome stuff.
Click to expand...
Click to collapse
Yeah, I should know better than to restore old System Data. It used to be a no-no, but the first 2 times I did a restore after first rooting and then a wipe a few weeks ago, I hadn't even thought of it. That's what 78 years away from the Rooting game does to you.
As for those commands, ADB-Devices came back with nothing till I did kill-server. Probably just something on my end

Database Info

welcome