Question Any DSP solution working on the P7P? - Google Pixel 7 Pro

James DSP, Viper etc don't work - anyone knows of a solution that does?

krakout said:
James DSP, Viper etc don't work - anyone knows of a solution that does?
Click to expand...
Click to collapse
Wavelet works fine.

JohnTheFarm3r said:
Wavelet works fine.
Click to expand...
Click to collapse
Thanks, seen reports it consumes a fair amount of battery?

krakout said:
Thanks, seen reports it consumes a fair amount of battery?
Click to expand...
Click to collapse
I mean...like any other audio processing app. Wavelet is basically viper but "lite" version of it. Same developer behind both.
Not sure about those reports but never experienced any "battery drain" with it.

Ah thanks for the feedback!

krakout said:
James DSP, Viper etc don't work - anyone knows of a solution that does?
Click to expand...
Click to collapse
JamesDSP working fine for me. Need to say "Yes" when it asks you if you have a Huawei device. Viper4Android-RE also works for me (for those options that have had their functions enabled).

V4A-RE, RootlessJamesDSP, Wavelet, plenty of options available. Personally I use Wavelet. Seems to be the easiest for my use case (primarily for AutoEQ)

krakout said:
Thanks, seen reports it consumes a fair amount of battery?
Click to expand...
Click to collapse
Seeing as all of those things do software signal manipulation rather than using hardware DSP, obviously they will work the CPU harder, which will in turn cause increased battery consumption.

JamesDSP and Viper RE are working just fine here. Mind you, the current Viper RE only has a few settings working.

96carboard said:
Seeing as all of those things do software signal manipulation rather than using hardware DSP, obviously they will work the CPU harder, which will in turn cause increased battery consumption.
Click to expand...
Click to collapse
Well very true, but the thread I read (telegram I think?)a couple of people were suggesting it really drains it. Anyway I guess I can see for myself!

schmeggy929 said:
JamesDSP and Viper RE are working just fine here. Mind you, the current Viper RE only has a few settings working.
Click to expand...
Click to collapse
Hmm, for me James DSP complains it cannot be installed on a 64 bit only system. Europe you mind sharing where you got it?
Also tried ViperRE, always complains about not being installed...

Well you need to flash the viper module as well.
krakout said:
Hmm, for me James DSP complains it cannot be installed on a 64 bit only system. Europe you mind sharing where you got it?
Also tried ViperRE, always complains about not being installed...
Click to expand...
Click to collapse
You need to flash the viper module as well.
You can download jamesdsp here https://zackptg5.com/android.php
Select yes when it asks about Huawei device.
It does work, I have tried them myself.

The module was not installing for me, complaining about compatibility. But I'll try again with the Huawei thing, thanks!

Related

[Q] Anyone with Juice Defender and Root?

I'm wondering if anyone with Juice Defender and the CPU speed control can tell me if it works well or not?
Also, anybody try the AOSP helper??
toastthemost said:
I'm wondering if anyone with Juice Defender and the CPU speed control can tell me if it works well or not?
Also, anybody try the AOSP helper??
Click to expand...
Click to collapse
Oops I clicked the wrong button... oh well +1 to your thanks count
Anyways: I don't use Juicedefender because I think it reduced stability of my phone/doesn't defend its juice. However if you're looking for free CPU Sliders check out ROM Toolbox.
cogeary said:
Oops I clicked the wrong button... oh well +1 to your thanks count
Anyways: I don't use Juicedefender because I think it reduced stability of my phone/doesn't defend its juice. However if you're looking for free CPU Sliders check out ROM Toolbox.
Click to expand...
Click to collapse
Works really well for me, but thanks. Is ROM Toolbox's CPU changes pretty safe/stable?
toastthemost said:
Works really well for me, but thanks. Is ROM Toolbox's CPU changes pretty safe/stable?
Click to expand...
Click to collapse
Yes it's definitely safe and stable. Make sure that you confirm that a certain setting works before selecting "Apply on boot" and you'll be fine.

[Q] Having some heating issues. need some suggestions.

Hello I am having heating issues. I'm not sure if this is normal or not and would like to know if there is anything I can do to reduce the heating issue?
I rooted my phone about 3 months ago. I installed the Liquid Smooth Rom. However I re-flashed TW because of some feature that I missed.
I have these apps on my phone: Rom Toolbox; Titanium Backup; EZ-Unlock; Root Checker Basic; Rom Management; Root Explorer; SD Booster; Trickster Mod & Supersu.
I've tried underclocking the phone by lowering the CPU max in both Trickster Mod and Rom Toolbox but both seem to revert back to the highest CPU settings.
My issue is that when I run my tethering app (pdanet/foxfi) my phone gets really hot and my battery drains like crazy.
Does anyone have any suggestions for me? I mean, I have those apps I listed above but really don't know how to set them up correctly to control my phone efficiently.
Thank you for any help you can offer.
prolonged tethering is going to stress the battery. Plus, pdanet and foxfi are not too reliable or efficient (my experience)
if you're on TW, I'd do a search for WifiTether_TrevE_Mod. I think it may be on google playstore as well.
epagib said:
prolonged tethering is going to stress the battery. Plus, pdanet and foxfi are not too reliable or efficient (my experience)
if you're on TW, I'd do a search for WifiTether_TrevE_Mod. I think it may be on google playstore as well.
Click to expand...
Click to collapse
Ok, thanks so much!
I'll look it up. I take it that it is more reliable and easier on the battery?
EDIT: I'm sorry, but I am a bit of a newb here. I did a search and came across this thread. http://forum.xda-developers.com/showthread.php?t=1988735
I'm sure this is the one that you were referring to. However I can't seem to find a download link. (Maybe I'm blind or just don't understand). I also did a search on the play store and came up empty. Can you point me in the right direction please.
Sithlyone said:
Ok, thanks so much!
I'll look it up. I take it that it is more reliable and easier on the battery?
EDIT: I'm sorry, but I am a bit of a newb here. I did a search and came across this thread. http://forum.xda-developers.com/showthread.php?t=1988735
I'm sure this is the one that you were referring to. However I can't seem to find a download link. (Maybe I'm blind or just don't understand). I also did a search on the play store and came up empty. Can you point me in the right direction please.
Click to expand...
Click to collapse
Yes, wifitether by TrevE is excellent. If you follow his work...that guy is a programming genius.
I have copy, can update but wont be till after work tonight (midnight)
epagib said:
Yes, wifitether by TrevE is excellent. If you follow his work...that guy is a programming genius.
I have copy, can update but wont be till after work tonight (midnight)
Click to expand...
Click to collapse
Ok, great.
Also, is there a optimization thread somewhere? I would like to know how to optimize my phone for top battery efficiency while not giving up to much on the usability side. I know about screen brightness and keeping my sync off and all of the basic things. I would like to know how to set up my system and such. I've froze many of the bloatware apps using TiBu but this hasn't resulted in the marked improvement I was hoping for. Maybe I didn't freeze the right ones.
One recommendation. Don't run 2 CPU management apps at once. Bad **** happens. Gerry rid of rom toolbox and keep trickster
Sent from my SCH-I535 using Tapatalk 4

[Q] Music problems, Flashlight gesture not working...

I have some problems with the OPO nothing big:
Connection to a headphone often dont work, it plays but i cant here it.
Flashlight gesture ON is often not working, i think it just dont wake ups the phone, OFF works fine.
Using: ParanoidAndroid4.5B1
Anybody has the same problems? My phone is undervolted to -87mV, but i dont think thats the problem.
Is your headphone... happen to be a headset? (with a microphone)?
The flashlight gesture on/off is a ROM problem (or maybe its just you) you have to ask in your respective ROM thread to be sure.
What kernel are you using?
zephiK said:
Is your headphone... happen to be a headset? (with a microphone)?
The flashlight gesture on/off is a ROM problem (or maybe its just you) you have to ask in your respective ROM thread to be sure.
What kernel are you using?
Click to expand...
Click to collapse
No connected to my stereo system, i was not sure how to write this sorry.
I will, but i just dont want to write on every page of the ROM with my problems i have
Using Franco r10
_Beni_ said:
No connected to my stereo system, i was not sure how to write this sorry.
I will, but i just dont want to write on every page of the ROM with my problems i have
Using Franco r10
Click to expand...
Click to collapse
I had a similar problem when it comes to headsets. Try this, plug in the headphone jack very slowly until you hear a "static" pop when you hear it, leave it there for a couple seconds and then plug the jack fully in. When you hear the static pop, 1-2 seconds later it should start playing the music.
I prefer Franco Kernel but currently I'm testing AK Kernel as Franco hasn't been updated for awhile so I'm going around testing what other kernels have to offer. AK kernel seems to have this problem resolved, give that kernel a try and see if your headphone problem still occurs.
Well I don't use PA so I can't really help you with that. Its most likely a ROM problem if the gestures are enabled.
I heard of someone whos phone often got hot in his pocket, because the flashlight was activated by this gesture in his pocket. Maybe they tried to fix this and this is a bug..?
MateUserHHTT said:
I heard of someone whos phone often got hot in his pocket, because the flashlight was activated by this gesture in his pocket. Maybe they tried to fix this and this is a bug..?
Click to expand...
Click to collapse
They fixed this in the 30O OTA. They've made it so it uses a proximity sensor so if its blocked, gestures are disabled.
zephiK said:
They fixed this in the 30O OTA. They've made it so it uses a proximity sensor so if its blocked, gestures are disabled.
Click to expand...
Click to collapse
Oh, ok. This is clever.
MateUserHHTT said:
Oh, ok. This is clever.
Click to expand...
Click to collapse
LG did this before
zephiK said:
LG did this before
Click to expand...
Click to collapse
Oh, okay. But it's still clever. ;P
zephiK said:
I had a similar problem when it comes to headsets. Try this, plug in the headphone jack very slowly until you hear a "static" pop when you hear it, leave it there for a couple seconds and then plug the jack fully in. When you hear the static pop, 1-2 seconds later it should start playing the music.
I prefer Franco Kernel but currently I'm testing AK Kernel as Franco hasn't been updated for awhile so I'm going around testing what other kernels have to offer. AK kernel seems to have this problem resolved, give that kernel a try and see if your headphone problem still occurs.
Well I don't use PA so I can't really help you with that. Its most likely a ROM problem if the gestures are enabled.
Click to expand...
Click to collapse
So since your post it tried to switch to AK.
Now im done.
I did flash a old version because it didnt read (at all )
Lets try it... it dont seems to be as smooth as Franco
_Beni_ said:
So since your post it tried to switch to AK.
Now im done.
I did flash a old version because it didnt read (at all )
Lets try it... it dont seems to be as smooth as Franco
Click to expand...
Click to collapse
It works with AK? .... yeah AK you kind of need a tweaking app, their default settings aren't optimized. It still has mpdecision on even though intelliplug is in the kernel. Thats one thing I like about Franco Kernel, it doesn't have as many customizations for the kernel but the default settings are very optimized so it works good out of the box. For AK, I have to customize everything to my liking including intelliplug, governors, etc.
zephiK said:
It works with AK? .... yeah AK you kind of need a tweaking app, their default settings aren't optimized. It still has mpdecision on even though intelliplug is in the kernel. Thats one thing I like about Franco Kernel, it doesn't have as many customizations for the kernel but the default settings are very optimized so it works good out of the box. For AK, I have to customize everything to my liking including intelliplug, governors, etc.
Click to expand...
Click to collapse
V for light works better and the music problems are gone
Can u post some of your settings?
I dont want the same again, i spent many hours for optimizing the **** called s3.
_Beni_ said:
V for light works better and the music problems are gone
Can u post some of your settings?
I dont want the same again, i spent many hours for optimizing the **** called s3.
Click to expand...
Click to collapse
I haven't tweaked mines too much, I'm trying out
governor: slim
cpu min: 268
cpu max: 2457
intelliplug on
touch boost off
gpu max: 330
gpu governor: conservative
zephiK said:
I haven't tweaked mines too much, I'm trying out
governor: slim
cpu min: 268
cpu max: 2457
intelliplug on
touch boost off
gpu max: 330
gpu governor: conservative
Click to expand...
Click to collapse
Thanks
The audio problem is not fixed, i tried it again and now it dont work
_Beni_ said:
Thanks
The audio problem is not fixed, i tried it again and now it dont work
Click to expand...
Click to collapse
Odd... Ak fixed my audio problem.
I'm having a similar problem, no audio through headphones.
I'm on PA and AK.
I thought it was to do with PA so posted my issue there, but now I think it may be the kernel.
Also I get audio output at first it goes away when I get a notification(audio), but that too is very random, some notifications don't affect it some do.
Only a reboot fixes it temporarily, till another notification triggers the issue
Logs: GdriveLink
https://docs.google.com/file/d/0B_HLm5mfHuwKWExGcy1yUGpCYjQ/edit?usp=docslist_api .

Delete

Delete
Thanks mate.
How about apps like Greenify?
kevp75 said:
Thanks mate.
How about apps like Greenify?
Click to expand...
Click to collapse
Sure! I use that too but I thought it was a bit too obvious. I'll add it though
Craz Basics said:
Sure! I use that too but I thought it was a bit too obvious. I'll add it though
Click to expand...
Click to collapse
thanks mate.
I'd recommend tasker as well. set with a profile for screenoff to run greenify all apps.
sometime greenify wont run on its own... with tasker it force it to run
kevp75 said:
thanks mate.
I'd recommend tasker as well. set with a profile for screenoff to run greenify all apps.
sometime greenify wont run on its own... with tasker it force it to run
Click to expand...
Click to collapse
Added
Craz Basics said:
Added
Click to expand...
Click to collapse
may have a couple more for ya
not sure if you remember these but...
there were some fha/dha memory tweaks for the s6 build.prop about a year ago....
im testing now and so far incredible (30+ apps open with no redraws). just want to wait another day or so to verify stability
kevp75 said:
may have a couple more for ya
not sure if you remember these but...
there were some fha/dha memory tweaks for the s6 build.prop about a year ago....
im testing now and so far incredible (30+ apps open with no redraws). just want to wait another day or so to verify stability
Click to expand...
Click to collapse
I never had the s6, I had the HTC one m8. What's it do exaxtly?? Sounds interesting!
Craz Basics said:
I never had the s6, I had the HTC one m8. What's it do exaxtly?? Sounds interesting!
Click to expand...
Click to collapse
Hey bro.
All memory management stuff
havent tried the dha stuff... but the fha is working like a champion.
if i can remember to do it... i'll right up a flashable to delete existing dha values from build.prop and inject the fha stuff
https://forum.xda-developers.com/galaxy-s6/development/research-memory-management-dha-t3132060
kevp75 said:
Hey bro.
All memory management stuff
havent tried the dha stuff... but the fha is working like a champion.
if i can remember to do it... i'll right up a flashable to delete existing dha values from build.prop and inject the fha stuff
https://forum.xda-developers.com/galaxy-s6/development/research-memory-management-dha-t3132060
Click to expand...
Click to collapse
Gotya!! I think Lspeed has some options that it looks like this is what it would change.
Craz Basics said:
Gotya!! I think Lspeed has some options that it looks like this is what it would change.
Click to expand...
Click to collapse
I'll have to look it over. GovTuners working pretty well for me (same with the build.prop tweaks)... and I had issues with on on my lg g4...
p.s. You V4A ... primo mate so glad to have that back lololol
kevp75 said:
I'll have to look it over. GovTuners working pretty well for me (same with the build.prop tweaks)... and I had issues with on on my lg g4...
p.s. You V4A ... primo mate so glad to have that back lololol
Click to expand...
Click to collapse
The build prop tweaks you were making? And what did you have issues with on your g4? And, yeah!! V4A is amazing. Did you flash the zip I made or follow the guide?
Craz Basics said:
The build prop tweaks you were making? And what did you have issues with on your g4? And, yeah!! V4A is amazing. Did you flash the zip I made or follow the guide?
Click to expand...
Click to collapse
flashed yur zip
lspeed and govtuner seemed to conflict with each other9
did you remove govtuner? in my case I tried govtuner and the phone lagged even worse, rebooted and now I tried all the permormance profiles in ls speed and seems a little better, still of course you can see the lag some times
kevp75 said:
flashed yur zip
lspeed and govtuner seemed to conflict with each other9
Click to expand...
Click to collapse
Gotya, glad it worked! I don't use l speed anymore though, quickvic said not to use them with his root.bat
c-prodigo said:
did you remove govtuner? in my case I tried govtuner and the phone lagged even worse, rebooted and now I tried all the permormance profiles in ls speed and seems a little better, still of course you can see the lag some times
Click to expand...
Click to collapse
Try to enable init.d. should be an option in kernel aduitor!
so, we remove ls speed, and keep kernel auditor, but just for the init.d?
---------- Post added at 03:03 PM ---------- Previous post was at 02:36 PM ----------
Well I did, and you were right, with just govtuner on its running much better, I will keep testing on
c-prodigo said:
so, we remove ls speed, and keep kernel auditor, but just for the init.d?
---------- Post added at 03:03 PM ---------- Previous post was at 02:36 PM ----------
Well I did, and you were right, with just govtuner on its running much better, I will keep testing on
Click to expand...
Click to collapse
Sweet! Glad it worked. I also did the power efficient option in govtuner
Edit: dropped down performance number to 7 from 10. Gonna see if I can get better SOT.
Craz Basics said:
Sweet! Glad it worked. I also did the power efficient option in govtuner
Edit: dropped down performance number to 7 from 10. Gonna see if I can get better SOT.
Click to expand...
Click to collapse
aye...
i only had up until 7 and on balanced.
im not a heavy user... check fb, xda, and read news most of the time ... i save the gaming for my xbox1
kevp75 said:
aye...
i only had up until 7 and on balanced.
im not a heavy user... check fb, xda, and read news most of the time ... i save the gaming for my xbox1
Click to expand...
Click to collapse
I play small games, nothing that would effect battery. And with performance you get to go to 10. I'm going to try power saving mode on it.
Edit: Seems to run fine with it on battery profile. I also used kernel aduitor and set the big cpu to interactive and left the little ones on conservative. I enabled apply on boot as well I'm getting a full charge to see how it is on battery!
Making a ROM - https://forum.xda-developers.com/s7...other-development/rom-crazy-rom-v1-0-t3637871
I flashed and had to flash stock because once it booted, it would randomly restart after a minute or so. So I lost all my tweaks lol. :/

[Solved] How to enable high brightness mode?

Is there something like a magisk module for that? I'm rooted on 9.0.4 8.1.0
Burllz said:
Is there something like a magisk module for that? I'm rooted on 9.0.4
Click to expand...
Click to collapse
There is one I found, but it's to fix adaptive brightness being too low:
https://forum.xda-developers.com/oneplus-6/themes/mod-brighter-adaptive-brightness-t3796846
Burllz said:
Is there something like a magisk module for that? I'm rooted on 9.0.4
Click to expand...
Click to collapse
Usually it's kernel based. Not sure about magisk. Lots of them support it but most of them need you to turn it on/off manually. I like elemental ex kernel because flar2 (the developer) provides a paid app that makes high brightness mode fully automatic. You can even Adjust the light threshold by which it comes on and off. I have it and love it on 9.0.5 oos. Worked for me rooted on 9.0.4 as well.
You can also buy high brightness mode for like $1 in the play store. If don't want to pay, custom ROMs, kernels or magisk modul.
thejase said:
Usually it's kernel based. Not sure about magisk. Lots of them support it but most of them need you to turn it on/off manually. I like elemental ex kernel because flar2 (the developer) provides a paid app that makes high brightness mode fully automatic. You can even Adjust the light threshold by which it comes on and off. I have it and love it on 9.0.5 oos. Worked for me rooted on 9.0.4 as well.
Click to expand...
Click to collapse
I'll try the kernel if its available for oreo.
gmark247 said:
You can also buy high brightness mode for like $1 in the play store. If don't want to pay, custom ROMs, kernels or magisk modul.
Click to expand...
Click to collapse
Yeah I know about this app but does it work? Is it safe? A kernel seems like a better option.
Burllz said:
I'll try the kernel if its available for oreo.
Yeah I know about this app but does it work? Is it safe? A kernel seems like a better option.
Click to expand...
Click to collapse
I use the app, it works fine for me. You won't get a display as bright as the high end flagships like Samsung or Apple, but it definitely increases the brightness when you're outdoor
gmark247 said:
I use the app, it works fine for me. You won't get a display as bright as the high end flagships like Samsung or Apple, but it definitely increases the brightness when you're outdoor
Click to expand...
Click to collapse
Apparently the app is developed by the guy who makes the ex kernel so I think I'm gonna use both. Thanks!
I have not received my ONEPLUS 6 yet.. so just curious if you all feel like Stock OnePlus brightness is decent in direct sunlight?
Burllz said:
Apparently the app is developed by the guy who makes the ex kernel so I think I'm gonna use both. Thanks!
Click to expand...
Click to collapse
Yup, that's what I do! I also recommend the magisk module lkt for battery savings.
---------- Post added at 05:26 PM ---------- Previous post was at 05:25 PM ----------
Jaws4God said:
I have not received my ONEPLUS 6 yet.. so just curious if you all feel like Stock OnePlus brightness is decent in direct sunlight?
Click to expand...
Click to collapse
It's not great at stock max brightness
Jaws4God said:
I have not received my ONEPLUS 6 yet.. so just curious if you all feel like Stock OnePlus brightness is decent in direct sunlight?
Click to expand...
Click to collapse
It's awful I cant see anything at direct sun light. For some reason it's a bit brighter on oreo.

Categories

Resources