Database Info

Install TWRP and root LG v10 H901 T-Mobile

Download
Search for TWRP recovery for LG V10 H901 (File: twrp-2.8.7.0-h901.img (31.7 MB))
Backup Apps and Data
While this process should not wipe any of your data, a backup is highly recommended. Once you install a custom recovery like TWRP, make sure you backup your system, data,etc. from the recovery. It will be helpful in case anything goes wrong.
Prerequisites
This guide is compatible with LG V10 H901 only. Do not try it on any other devices or variants.
Unlocked bootloader is required to install a custom recovery like TWRP on your device. Click here.
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
Install Motorola USB Drivers on your computer.
Open Settings> Developer options and enable USB Debugging on your device.
Go to Developer options and enable Allow oem unlock.
How to Install TWRP Recovery on LG V10 H901
Download the recovery image file. Extract if in case a zip file. Now transfer the file to your PC where you can easily locate it.
Make sure you have setup ADB and fastboot on your PC. Also accept Always allow from this computer when you plug in the device for first time to enable USB Debugging.
Now power off your device and unplug it from your PC.
Boot into the bootloader or fastboot mode. To do so, press and hold volume down and the power button simultaneously for 5-6 seconds. When you see the bootloader screen, connect your device to the PC using a USB cable.(Choose fasboot if option is available) Alternatively, you can also issue the following command through your cmd or terminal, while connected to the PC in order to boot into the bootloader.
"adb reboot bootloader"
Navigate to the location where you have placed the recovery file. Rename the recovery file to a simple one, like recovery.img. While the folder with recovery.img file is open, hold shift key on keyboard and right-click on an empty space and select “Open command window here” option to launch a cmd window.
Now issue the following command in the command prompt to check your device connectivity
"fastboot devices"
Now flash custom recovery. Issue the following command for that.
"fastboot flash recovery recovery.img"
Custom recovery will now be installed on your device. Now boot your phone in recovery mode. You can do this by turning your device off and then press and hold volume down and power keys at the same time. Or you can simply enter the following command.
"fastboot boot recovery.img"
Once into the recovery, you can backup your current ROM, data, EFS and more.
Once you have installed TWRP, you are all set to install custom packages onto the device’s system. Alternatively, while on Linux or Mac OS, you can issue “./fastboot flash recovery recovery.img” command to flash the TWRP recovery.
Root
As you already have TWRP, simply flash the SuperSU file (version 2.56) to gain root access

@TheJesus @KAsp3rd, thanks guys for everything you've done over the past few days. no shade to @joe01gun but if people are going to use these instructions make sure you search the rest of the forum for what thejesus and kasp3rd put together to get us to this point - definitely appreciated. thanks @joe01gun for putting these additional instructions together.

Your post says the following:
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
yet, there's no link to the necessary files to "unzip" them. Any suggestions?
Thank you for the help, but where do we get fastboot set up on our PCs? Yes, this is getting confusing with the steps outlined above. I followed the first step and had to take out the battery because I was stuck in fastboot screen with small tiny text in the top left that didn't respond to any manipulation with the volume keys on the back of the device and wouldn't restart any way until I took out the battery.

sanjsrik said:
Your post says the following:
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
yet, there's no link to the necessary files to "unzip" them. Any suggestions?
Click to expand...
Click to collapse
I think it's cause he's not allowed to post links yet cause he's too new. I followed this guide http://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930
You can get twrp from the development forum.

Why
Intended to put the information condensed....
Yep....new
Links could not be uploaded.

joe01gun said:
Intended to put the information condensed....
Yep....new
Links could not be uploaded.
Click to expand...
Click to collapse
Your condensed thread is more convoluted than the actual development thread which also includes the links to everything.
I'm still wondering why you have install Motorola USB drivers for an LG phone..

Understood
Understood

The one on development is straightforward and I managed to make it done.
If you don't lock the bootloader back, you will see bootloader unlocked when starting up.
If you have root enabled file explorer, you should remove /system/priv-app/adaptclient folder to avoid annoying root request from adapt.

Please use the main dev thread for instructions on what to do, found below. Having duplicates for what is essentially the same thing can cause confusion and just takes up unnecessary space. So I have closed the thread.
[Recovery][LG-H901] Unofficial TWRP
Forum moderator,
matt4321

[ROOT] Coolad Modena 2 / Sky 2 (E502)

Recently, I successfully ported TWRP from Coolpad Note 3 Lite to Modena 2. After testing, everything works fine, on both devices. Since this device has locked bootloader, we need to bypass this by enabling fastmmi mode and factory mode to enable temporary root access and make initial backup and flashing. So, let´s get started.
Remember to read this post carefully. I am not resposible for any damage to your device. If you brick your device while flashing the TWRP you can *almost* always recover it using SP Flash Tool and YGDP Tool
IF YOU ACCIDENTALY BRICK YOUR DEVICE AND YOU WANT TO FLASH IT VIA SPFT, DO NOT FORMAT THE DEVICE IN SPFT!!! If you´ll format partitions in TWRP, that´s fine, but don´t do FORMAT ALL + DOWNLOAD or FIRMWARE UPGRADE! This will brick your device, like mine This tutorial will not (hopefully) brick it, but just in case something goes wrong, now you know what not to do.
Preparing the environment on your computer
Windows
Download ADB and Fastboot from this link
Open it
Install it system-wide
Also, install the drivers
GNU/Linux (Ubuntu / Debian based distros)
Open terminal
Type "sudo apt install adb fastboot libusb-dev" without the quotes (")
Other things, that are required
Since the file size of the recovery exceeds the maximum 8MB of allowed upload size, you can download it from DataFileHost.
Preparing the device
First, you need to remeber that this could render your device unbootable and will void warranty.
Enable developer options
Go to Settings -> About phone
Tap the build number 7 times
Go back
Go to Developer options
Make sure OEM unlocking and USB Debugging is enabled
Enabling factory mode
Open dialer app
Dial *#9527*#
Click on "DM"
You will be prompted to insert RD personnel password. Enter: 54321
Click cancel button
DM button should change colour to RED
Exit the app by clicking home button
Installing and setting up openrp app
Open terminal / command prompt
Type:
Code:
adb start-server
Type:
Code:
adb devices
Now, click on your phone allow debugging and make sure to tick the radiobutton to remember / always trust this computer
Type:
Code:
adb install
Press spacebar after the install word and drag and drop the downloaded openrp.apk file to terminal
Hit enter
After it´s done, type:
Code:
adb shell monkey -p com.yulong.openrp -v 500
Now, the fun part. ROOTING the device
But before that, BACKUP
Now, keep your phone plugged in, and do a normal reboot by pressing and holding the power button and clicking reboot
When it vibrates, press and hold the Volume down key (Vol-)
You will see these lines on the screen:
Code:
=>[Factory mode]
Code:
=>VolumeDown key is pressed
Code:
=>[fastmmi mode]
After that, you´ll see the LED turns green and "Up Down" text on the screen
Now, back to your computer, type in the command prompt
Code:
adb devices
You should see XXXXXXXXXXXXXX device listed (where XXXX... is the serial number)
Type in the command prompt:
Code:
adb shell dd if=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/recovery of=/storage/self/primary/stock_recovery.img
and
Code:
adb shell dd if=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/boot of=/storage/self/primary/stock_bootimg.img
Flashing the TWRP Image
Type in the command prompt:
Code:
adb push (drag and drop the recovery image file here, like you did with the openrp.apk file) /storage/self/primary/
Type:
Code:
adb reboot
Press and hold VolumeDown key (Vol-) to boot to fastmmi mode
Type:
Code:
adb shell dd if=/storage/self/primary/recovery_twrp_e502.img of=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/recovery
Type
Code:
adb reboot
Press and hold the VolumeUp key (Vol+) to boot into recovery. If you see white screen with "Recovery" text in it, congrats. Everything is working. If not, try again.
Flashing the SuperSU package
Download the zip from SuperSU website
Copy the zip over to the device, with TWRP running
In TWRP, click install, click the zip and confirm the installation.
Factory reset is not required, but you should at least wipe the cache
If this post was useful for you, hit the thanks button

RESERVED

Hi i have a problem here. at the part to drag and drop the openrp file. When i have downloaded the file a drag it and drop it after the install word. The problem is that if I want to drop it there it will do nothing, nothing there shows or anything. Please respond.

I guess you can type the path to the installation file instead of dragging.

Hello,
Very helpful thread, my coolpad Modena 2 (E502) is now rooted.
Don't forget to disable the factory mode once everything is done, or you won't be able to access the storage to usb anymore.
Thanks.

helo, can i get help, when i try to install openrp on abd and fastboot, it printed this message "Failure [INSTALL_FAILED_SHARED_USER_INCOMPATIBLE]"
can anyone help me on that step, so i can root my e502

TCRakt said:
Hello,
Very helpful thread, my coolpad Modena 2 (E502) is now rooted.
Don't forget to disable the factory mode once everything is done, or you won't be able to access the storage to usb anymore.
Thanks.
Click to expand...
Click to collapse
how to disable the factory mode ?? :crying:

Firefa23 said:
how to disable the factory mode ?? :crying:
Click to expand...
Click to collapse
Hello,
If I recall correctly (I don't have the phone anymore, just touched it once to root it at the time), you basically undo the "Enabling factory mode" step.
I think if you dial the number, you'll be back in the menu where you have the option to disable the factory mode.
Factory mode should be disabled when 'DM' is green.
Good luck

very good

Need Custom rom please
nougat / pie

Hello, could you resend the twrp recovery file for this phone again?. old links not work!.
(sorry for my bad english)

[GUIDE] [SUPPORT] How to root, optimize, and repair Xiaomi Redmi Go.

The One-for-All Guide to rooting, improving, and fixing various errors in Xiaomi Redmi Go!​Hello everyone! This thread that I made is for all people who wants to modify and gain full access, as well as to repair their Xiaomi Redmi Go devices the well-guided way, I've noticed that nobody has made an all-in-one guide for this phone so I decided to do it, this thread will keep on expanding depending on what I will discover about this phone, but for now, here is the thread, i expect that you have at least a little amount of knowledge when it comes to phones such as ADB and Developer Options.
What can we do with Xiaomi Redmi Go:
1. We can root it, and the best root manager for this phone is Magisk, SuperSU is also good, but if you're planning to use your phone for mobile banking, then Magisk is right for you. (Unfortunately this isn't true right now due to ctsProfile being hard to manipulate, Redmi Go supports hardware backed key attestation which means your device will definitely be not certified no matter what you do, so until we get a new method, don't root your phone if you want to use apps like Google Pay
2. TWRP is the current custom recovery available for this phone, it has flaws, but its currently the best out there, so its worth the shot to install it, the thread for it will guide you.
3. No custom kernels, people said that they have managed to install AOSP 9 and GSI on this device and made it boot up, but for me, it's better to wait for the official ROM update, after all, the device is still supported.
Prerequisites:
1. Xiaomi Redmi Go
2. An internet connection, a strong one is recommended if you want to download a ROM.
3. A computer with SDK Platform Tools ready to use, this is required, the link is here: https://developer.android.com/studio/releases/platform-tools
Don't forget to also get its driver! The link is also here: https://developer.android.com/studio/run/win-usb
The drivers are tricky to install but I will guide you on doing it in the easiest way possible, please continue on the thread.
4. SD card, your user data will be erased later, better back your files up, this is a warning.
5. Turning on "OEM unlocking" and USB Debugging in Developer Options, this is also really important!
Table of contents:
1. Unlocking the bootloader (and setting up ADB)
2. Rooting
3. Applying the custom recovery
4. Additional modifications
5. Stock ROM links
6. Bonus Section
WARNING: I am not responsible for anything that happens to your device as you follow my guide, do not blame me if you turned your device into a paperweight, made it explode, made it fly or whatever it may be, you chose to modify this phone and you should be accountable for it, you must know the consequences of what you're doing, try to point your finger at me because of what YOU did and I will laugh at you.
I am ready to assist though, so please feel free to ask some questions!
Let us begin, this will take several minutes, so please be patient and avoid rushing.
1. Unlocking the bootloader.
NOTE: This requires your computer to have SDK Platform Tools extracted to any location as long as its easy to access, and its really complicated to talk about it here, this step doesn't include the method where you request a code from Xiaomi, but I've provided a link for it.
A. First, get your phone up, and open the folder on where the SDK Platform Tools are placed, make sure that your in the directory where you see the .exe files of the SDK, now, hold Shift on the keyboard and click "Open Command Prompt here" and type "adb reboot bootloader", without quotes don't forget! This applies to all the steps that I will provide, don't forget to change the USB connection mode of your phone to PTP for it to be detected by ADB! (Only applies to Windows 8/8.1) Once your phone is asking for an authorization, check "Always allow this computer" then tap allow.
B. Once your device has been booted up into Fastboot or the bootloader, check first if your device is being detected, type "fastboot devices", if yes then proceed, if no, then stop here for now.
1B. If this happens then you may have to check your drivers and see if its installed correctly, once your device can be seen at "adb devices" it should also been seen in "fastboot devices" and when the phone is in adb sideload, if not then you have to reinstall ADB, get the proper drivers and do it again.
C. Now, type "fastboot oem unlock-go", the terminal will warn you that all of your user data will be removed, if you have them backed up then and go ahead and enter the command, if not, then just type "fastboot reboot" and start backing up your files, then do this again.
D. The phone will boot up and say "Erasing", to confirm that your phone has its bootloader unlocked, once it boots up again see if it says "Unlocked" on the bottom part of your screen, if there is then congratulations, it should be unlocked at this point.
1D. https://www.getdroidtips.com/unlock-bootloader-xiaomi-redmi-go/, this one particular link provides you on how to unlock the bootloader by entering a certain code, I believe this is a safer method but requires a bit of time, go here if you're interested.
NOTE: The phone supports the command "fastboot flashing unlock_critical" if you are going to unlock your phone with the normal command (fastboot oem unlock_go/fastboot flashing unlock), consider using this 2nd command too, what it does is that it allows you to also flash partitions you supposedly don't have access to, just be very careful not to flash any wrong file! It will be useful to make the "flash_all.bat" script work that you can find on the fastboot ROM for this device, more below!
Once your bootloader has been unlocked, you can now proceed to the other steps that I provided here, don't forget to enable USB Debugging on your Developer Options.
1.2 Setting up ADB
1. Grab your phone, unlock and open your Developer Options then enable "USB Debugging", then change your connection type to "PTP" if you are using Windows 8/8.1, I am not sure if this is required on 7, but it is not needed on Windows 10.
2. Go to this link: https://developer.android.com/studio/releases/platform-tools and download the .zip file, then extract it to a location that is easy to access, like your desktop.
3. Get the official Google drivers here: https://developer.android.com/studio/run/win-usb download the .zip file as well, and extract it too.
4. Go to the extracted folder of your SDK Platform Tools, and go to the directory where you can see various .exe files such as "adb.exe", now, hold the Shift key then click the Right mouse button, then click "Open command prompt here" If this doesn't work for you, open up CMD with admin rights, then type in cd *the location of your platform tools* say on mine, I will input cd C:\Users\James\Downloads\platform-tools_r31.0.3-windows\platform-tools then enter
5. Open your Device Manager by pressing Windows + R, put "devmgmt.msc" without any quotes then Enter, do not close the Device Manager until you're done with all the steps! And please be fast here too or else ADB will not work, now go to your extracted folder of the Google USB driver, and look for the file "android_winusb.inf", copy the location path of it as you will need the exact location path of the file later, in my case it was "C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\android_winusb.inf".
4A. There are 3 main ADB devices that you have to install, Android ADB Interface, Android Bootloader Interface and Android Composite ADB Interface, so I will divide this into 3 sections, have your Device Manager, and the exact location of the .inf.
NOTE: Turn off the internet connection of your computer, why? Because, if you let Windows install the drivers for you, the drivers may be incorrect and will break things apart, as we will encounter several "Unknown devices" in the Device Manager and we have to update them with the extracted files from Google.
Android ADB Interface
1. Now, make sure that USB Debugging is enabled, now plug in your phone and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
2. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
NOTE: If you plug your phone and there is no "Android" device with exclamation mark, you can proceed to try and see if adb detects your device by typing "adb devices" in the command right now, it should be since this is what I experienced when setting up my device in Windows 10, this step usually applies only if you are using Windows 8/8.1
Android Bootloader Interface
1. To test, go to the command prompt you opened earlier, and type "adb devices", the device should now be detected at this point, when it does, type "adb reboot bootloader".
2. Now, make sure USB Debugging is enabled on the device before booting it into bootloader, now plug in your phone again and let the drivers install WHILE your computer is offline, Go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Bootloader Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
Android Composite ADB Interface
1. Before proceeding, type "fastboot devices", the device should now also be detected on fastboot, now, type "fastboot reboot", and afterwards, enable "USB Debugging" on the Developer Options, then go your command prompt, then type "adb reboot recovery".
2. Now, now plug in your phone again and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Composite ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
2. Applying the recovery/custom recovery
A. Open up your phone and ensure that USB Debugging has been enabled, now, open up your command prompt just like in Step 1 in Unlocking the Bootloader and type "adb reboot bootloader"
B. Next up, type "fastboot flash recovery path/to/recovery.img", substitute the path/to/ with the actual location of your recovery, and please make sure that the name of the image is "recovery.img"! Or else it will not overwrite/update the recovery, you can also put your recovery.img directly within the platform-tools folder so that all you have to type is "fastboot flash recovery recovery.img" then press enter.
C. Once your done, reboot the phone and press Volume Up + Power at the same time, and the recovery will start. (You may want to do this else the recovery will be automatically removed and replaced with the stock one)
1C. For the stock recovery, once you press the combination, the phone will say "No command", at this point, hold your Power button and press Volume up one time to get into recovery.
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282 here is the link of the TWRP recovery, I encourage you to follow the steps mentioned in the post properly.
WARNING: The fix I provided below is now pushed here for 1 certain reason, before you try to root your phone and do everything else, you must decrypt your internal storage first and it is quite easy, first you must get the decrypt.zip linked in this thread (if the .zip cannot be found, I still have a copy of it), go to TWRP and do "format data", not Wipe Data! How so? Once you reboot to TWRP, it will show you the "Wipe" button, tap that, then the "Format Data" button should show up, this will require you to type in "yes" so type it in, then once it is done formatting, go back to the main TWRP screen, tap "Reboot", then "Reboot to Recovery", afterwards you must go to "Install" then proceed to install the "decrypt.zip", after that you can now flash .zip files from your internal storage too, but beware that you must do this every time you update your device!
3. Rooting your phone
A. To get started, install TWRP for your phone first.
B. Get the .zip file of Magisk/SuperSU so you can install them, the links are https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 and https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
C. Reboot your phone to recovery or just plug it in, open the command prompt again just like in the previous step and put "adb reboot recovery" without quotes.
D. Tap "Install" on your TWRP recovery and select the respective installation .zip file of your chosen root management app, and wait for it to finish.
1D. The .zip for both SuperSU and Magisk can be installed through "adb sideload", if incase you don't have an SD card! It may also work with fastboot as well but I need someone to confirm this.
E. When it's done, wipe the cache first, then reboot.
1E. If the root management app didn't appear in your phone after boot, just install the APK of it in the Play Store and check if root has been applied, if not, repeat step C and D again.
BONUS: It may be useful also to grab EdXposed or LSposed for Magisk and the link is here: https://forum.xda-developers.com/t/...or-of-xposed-oreo-pie-q-r-2020-07-19.4070199/ and here: https://forum.xda-developers.com/t/...e-magisk-module-edxposed-alternative.4228973/, please choose only one! You will use the normal Xposed if you're using a different root management app such as SuperSU, the link is here: https://forum.xda-developers.com/showthread.php?t=3034811
What this does is that if the app is an Xposed/EdXposed/LSposed framework module, any modifications it does to your phone will be based on memory only, it won't modify your phone directly which means your device will be clean, and if it incase the said modification bricks your phone, you can easily recover from it too!
BONUS 2: I also recommend getting the Busybox module from Magisk itself, it can easily be downloaded from the Magisk app, you will need this module if you want your root applications to work more efficiently and avoid errors, as most of them requires Busybox to work, don't use the Busybox installer apps on Play Store as they modify /system directly, only use it if you are using SuperSU.
4. Additional modifications
Once you've managed to root your phone and everything else, what I recommend you could do with your device is to get the following apps:
Titanium Backup - It has the ability to back up apps on your phone, and even its data! this app could do so much more than with what I just mentioned.
LSpeed - A root boosting app that has almost every root tweak packed into it, its really convenient to use! I do not recommend using Entropy tweaks as I heard it is a placebo.
Greenify - For me, this is the only legit battery saving app aside from LSpeed which also offers tons of battery saving features, it requires Xposed to have more options you have to buy it to gain full functionality
ROM Toolbox - This app pretty much contains everything a rooted user needs, such as a terminal and root-based file manager.
System app uninstaller (optional) - Just in case if you're planning to remove some bloatware (the list of it is below)
Root Browser - An alternative to ROM Toolbox, this root explorer is really popular and gets the job done without any interruptions.
Terminal emulator - This will allow you to enter various commands on your phone, like being able to reboot the phone without using any keys.
In order to make the phone as fluid as possible, just leave it with stock ROM installed, try to also use lite apps like Facebook Lite to reduce RAM and battery consumption.
Kernel Adiutor - Another great root application, it's like LSpeed but it doesn't automate tweaks, it instead allows you to modify most of it on your own, then it reapplies your tweaks every time your cellphone will boot up if you tap the "Apply on startup" switch. the link for the app is here: https://m.apkpure.com/kernel-adiutor-root/com.grarak.kerneladiutor
NOTE: Most of these apps can be found on the Play Store, and please don't install any more similar root boosting apps such as HEBF, scripts such as V6 Supercharger, or modifying files like build.prop, it is due to the fact that this will conflict with LSpeed, as LSpeed contains most of the tweaks that past scripts and apps provide, this will result in your phone slowing down a lot, Greenify will require Xposed Framework which is mentioned above on the Rooting section, the link to LSpeed is here https://github.com/Paget96/LSpeed, because the app has been removed from Play Store.
WARNING: The perf.zip https://forum.xda-developers.com/android/development/-t3935220 here, that was provided in Xiaomi Redmi Go forum section must be applied with extreme caution, you have to make a backup of your build.prop in /system, and build.prop + default.prop in /vendor for easy recovery, you can use ZipMe to easily make a backup for these files.
5. Stock ROM links
https://xiaomirom.com/en/rom/redmi-go-tiare-global-fastboot-recovery-rom/, this link so far provides all the ROMs (both recovery and fastboot) available for download on this phone, and they are actually light enough, so it will be easy to download them.
https://xiaomifirmwareupdater.com/archive/miui/tiare/ a new link I've found recently, this rom contains the .tgz format of the latest ROM for the Xiaomi Redmi Go, which could be used for fastboot and Mi Flash Tool, just search for the model and go for Global.
NOTE: Most of the ROMs for this phone provided on several sites, even on the actual Xiaomi website, has an invalid format of .zip, and doesn't contain a flashall script, as a result, Mi Flash Tool will never be able to use these ROMs, you could not also use adb sideload and fastboot for these ROMs, only the stock recovery of the phone could install the ROM, due to the links provided above finally giving the latest ROM versions for the phone, extracting the stock recovery is very easy now, you can do it yourself but if you need a link, tell me.
5A. Applying the stock ROM
This section will be divided into 2 sections, flashing the ROM through recovery, flashing the ROM through fastboot manually, or automatically with flash_all.bat
Stock recovery method.
A. Download the stock ROM with .zip format and put it into your SD Card.
B. Flash your recovery back to stock with the steps given above, boot into your stock recovery, then using your Power button and volume keys to navigate, select "Apply update from SD card".
C. Select the .zip file and wait for the update to finish.
D. The device will boot up automatically after, if not, just go back to the main menu of the recovery and select "Reboot system", enjoy!
Fastboot manual flashing method.
A. Ensure that you have prepared your device and computer for ADB, now grab the ROM given in this thread in .tgz format, and keep extracting the file until you see the files such as "flash-all.sh" after extraction, as you need to extract the .tgz ROM two times before you could use it properly.
B. Now go to the extracted folder of the stock ROM, go the "images" folder and copy the following image files: boot.img, system.img, recovery.img (make a backup of this file somewhere!), vendor.img, cache.img, userdata.img, persist.img, and splash.img.
C. Paste them to the extracted folder of your SDK Platform Tools where various .exe files are located such as "adb.exe", or in my case the location is "C:\Users\Symphony\Downloads\platform-tools_r29.0.4-windows\platform-tools".
D. Now open your command prompt on this directory, or Shift + Right click, then plug in your phone, now type "adb reboot bootloader" so your phone will go to bootloader, don't forget to enable "USB Debugging" and PTP connection mode before rebooting! (only applies to Windows 8/8.1, it may vary on Windows 7 but it is different on 10, no need for PTP connection mode, you can just turn on USB debugging and that's all)
E. Now, this is a little tricky, but try to follow me as much as you can, make sure first that you are detected with "fastboot devices", input the following commands that I will give so you can flash the ROM to your phone, now go to the command prompt and:
To flash the boot.img to your phone, put the command: "fastboot flash boot boot.img"
For the recovery, the command is: "fastboot flash recovery recovery.img"
For the system or main OS: "fastboot flash system system.img"
For cache: "fastboot flash cache cache.img"
For persist: "fastboot flash persist persist.img"
For the vendor or additional system files: "fastboot flash vendor vendor.img"
For data or apps: "fastboot flash userdata userdata.img"
For splash or probably boot animation: "fastboot flash splash splash.img"
D. After that, type "fastboot reboot", and enjoy!
Fastboot automatic flashing method (NEW!)
A. Extract the fastboot ROM 2 times as instructed, after getting the files, grab all the files and copy it to the directory of your platform tools where files such as "adb.exe" can be found, just copy all the files in there and that's all you have to do.
B. Open the "flash_all.bat" on Notepad and remove the following lines:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || exit /B 1
Afterwards, save the .bat file, that should be ready to use now
C. As instructed above, you must also do "fastboot flashing unlock_critical" after unlocking your bootloader the normal way, this will act as your 2nd unlock command, without this, the flash_all.bat will not work as it should be.
D. Boot up your phone in fastboot mode, open up your adb devices and make sure that your phone is seen in "fastboot devices", once it does, type in "flash_all.bat" without any quotes and execute it, the command will now automatically flash everything without you doing anything else, it will also automatically reboot after doing so.
Bonus section:
1. TWRP-compatible stock ROM
For this part, in order for you to generate a TWRP-flashable stock ROM is by basically making it yourself, you have to make sure that your patch is latest, and its pretty much a good idea to just tick everything in the backup selection except for the recovery, as well as the cache as you don't need those.
Once you have it, go ahead and keep it somewhere safe but easy to find, so if case that you need to use it, you could get it immediately, this is extremely useful so please just do it, as of now, I've confirmed that only the /data backup was usable, but please try to confirm if other partition backups are working for you.
Certain custom ROMs that can boot up in this device could be flashed through TWRP though, and the links of them are provided here in this thread.
2. GSI, AOSP 9 and custom ROMs
The link for AOSP is provided here: https://forum.xda-developers.com/android/development/redmi-aosp-9-t3922192
The link for GSI is right here: https://forum.xda-developers.com/android/general/tested-gsi-redmi-t3924705
These images/ROMs can be applied with TWRP, just make sure to follow the steps mentioned in these posts to avoid inconvenience, don't forget to take precautions too! I haven't tried them, but so far I believe that these are stable to use.
There are also custom ROMs released for the device but I am lazy to link all of them, they can easily be found by going here: https://forum.xda-developers.com/tags/xiaomi-redmi-go/
Please take note that I haven't tested these custom ROMs yet and I most likely never will, since the stock ROM for the device is already good enough, you can comment here and tell me what custom ROMs are stable so I can link them here for future reference.
3. Current status
My phone is still working, yes! and it's still staying strong, updated to 2.25 using the fastboot method and it is still fast, the only issue currently is that SafetyNet is a lot more secure than before, so it will be impossible to use stuff like Google Pay for now.
I usually decided to lay low and just stay with my LSpeed, Kernel Adiutor and Greenify, all I had to do is to tinker with these apps and my phone just reached into a whole new level! The performance improvement is nice, that I didn't need to use a custom ROM anymore.
4. How to install a OTA update after rooting your device
Due to the changes made by Google on SafetyNet, and the fact that this device will always require you to wipe the device every update, it is pretty much the same, it doesn't matter anymore if you are certified or not, you will still receive an OTA update even if your device is not certified as long as you are using the stock ROM, you only won't be able to install it, and if you want to install the OTA update you must install it by flashing the updated fastboot ROM, I have links for it above, you can try installing the OTA updates yourself through the settings but you will still have to do a factory reset anyway, you have to also unroot also and revert to stock recovery, else the installation will fail, and your device may slower afterwards.
5. Bloatware you can safely remove (NEW!)
So, like I said above, as much as how lightweight the device is, there are still bloatware that you can remove if you really want, but it's only 3 of them:
Mi Video
Mint Browser
Mi Music
The rest such as Mi Share and Mint Launcher are also bloatware, you can remove them but to me they are useful so I didn't, do not remove the "Cleaner" app, if it however says something like "com.CleanMaster", you can try removing it but take caution as your Play Store may be removed along with it too.
Credits to everyone who made the apps/tools that I mentioned here! such as @topjohnwu for the Magisk, and @YasiR Siddiqui for the TWRP, @Paget96 for the awesome LSpeed app, @rovo89 for the Xposed Framework and many more, you guys totally rock!

Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
Can you please elaborate all of what you've done so far? I will also ask you a few questions.
1. Is your phone usable with the platform tools? I mean with adb and such.
2. Did you try going into recovery and flashing stock ROM through there?
3. Is your phone being detected by "fastboot devices"? The fastboot mode of Redmi Go is its download mode, and i've provided the link for the stock ROM that's usable thru fastboot mode, as well as on how to apply it.

My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
TheAngryGuitarist said:
My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.
Click to expand...
Click to collapse
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.

_XblackshadowX_ said:
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.
Click to expand...
Click to collapse
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community! ?

TheAngryGuitarist said:
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community!
Click to expand...
Click to collapse
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.

_XblackshadowX_ said:
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.
Click to expand...
Click to collapse
I'm not really sure if a malware caused this issue or a failed system update over-night.

TheAngryGuitarist said:
I'm not really sure if a malware caused this issue or a failed system update over-night.
Click to expand...
Click to collapse
I usually had failed system updates numerous times because when i install them, the phone has already been modified by a lot, and that's actually riskier.
That's why i recommend unrooting and putting back the stock recovery before updating first, still works on mine even with "Device is not certified" by Play Store.

The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282

I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?

_XblackshadowX_ said:
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?
Click to expand...
Click to collapse
Yeah, I've done everything you told, I also turned the connection mode to PTP also. Somehow it just not showing that android with an exclamation mark.
after that, I even tried to use the 15-second ADB installer. after installing that I tried to flash recovery but that just didn't do anything. After using that flashing command, I had the same stock recovery.
I'm really thankful you took the time to answer my question.

Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.

I am not able to flash TWRP on my redmi go

How to update the redmi go to the latest version without formatting/Factory Reset should I just follow Fastboot flashing method and if so which files should I just flash. Thank you

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Hi! sorry for the late reply, if this is the case then it's fine, you can just connect the device, open up adb tools, type adb devices and ensure that your USB debugging is on, and the device will connect immediately, at that point all you need is the adb driver for Fastboot

akki_007 said:
Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.
Click to expand...
Click to collapse
oh no, but why lock your bootloader? you can try using a recovery ROM, you must have a spare SD Card within you, grab a recovery ROM, put it in your sd card then put it into the phone and use it on stock recovery, you should be able to apply it and boot back into the system, please update me

igpraan said:
I am not able to flash TWRP on my redmi go
Click to expand...
Click to collapse
you must have unlocked bootloader if you want to do so.

niknah said:
The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282
Click to expand...
Click to collapse
that's strange, the TWRP I linked isn't giving me any vertical lines

Need help getting ADB to recognise my device?

So I may be doing something totally idiotic, but I seem to be stuck at the most simple part of unlocking my bootloader.
I follow this to step 2:
https://www.xda-developers.com/unlock-bootloader-root-oneplus-7-pro/
when it says "Set up ADB" I follow the link to this:
https://www.xda-developers.com/install-adb-windows-macos-linux/
until I get to step 7. When I enter the command 'adb devices' I never get a serial number nor a prompt to allow or deny USB Debugging access. I never get see my device’s serial number in the command prompt.
So doing a bit of digging I have looked into ensuring my ADB and One Plus driver was installed correctly, and I even purchased a new data transfer cable to make sure that wasn't the issue.
I check my device drivers and see get an error in my ADB Interface driver, but after following a few tutorials I'm still lost as to whether its updated or if I'm doing so incorrectly, or if that's even the problem.
Any direction would be appreciated.
I am running Windows 8.1 and my device is Android 10, model GM1915.

NephilimHoss said:
So I may be doing something totally idiotic, but I seem to be stuck at the most simple part of unlocking my bootloader.
I check my device drivers and see get an error in my ADB Interface driver, but after following a few tutorials I'm still lost as to whether its updated or if I'm doing so incorrectly, or if that's even the problem.
Click to expand...
Click to collapse
Hallelujah!!
Finally found a way to manually install the correct driver from a tutorial on visualgbd{dot}com, so now my device is recognised.
I had to find where my drivers were being default downloaded since they weren't in the place the tutorial indicated, but that was the only hitch.
SO. On to the actual unlock. :fingers-crossed:

So I need help.
I followed an XDA video tutorial which was a bit difficult for a newbie, but I think I did everything correctly up to installing TWRP.
I got to the point of flashing my ROM and jumped to the Eelo website instructions:
- Go to main menu, then tap Wipe.
- Now tap Format Data and continue with the formatting process. This will remove encryption as well as delete all files stored on the internal storage.
- Return to the previous menu and tap Advanced Wipe.
- Select the Cache and System partitions to be wiped and then Swipe to Wipe.
- Sideload the /e/ .zip package:
- On the device, select “Advanced”, “ADB Sideload”, then swipe to begin sideload.
- On the host machine, sideload the package using: 'adb sideload filename.zip'
I followed this and while the package did not sideload, I beleive my recovery partition was wiped I seem to be stuck.
I'm at the point where I feel I need to Flash OEM Stock and start over, but I am getting a bootloader loop.
Really need help. I feel at this point I'm going to start making things worse as I look at various tutorials and whatnot.

In case additional information is helpful:
My device does not show up in my device list, but it is detected with "fastboot devices".
I attempted to flash TWRP with "fastboot flash boot <TWRP.img> and it writes to 'boot-a'. But when I then try to boot into recovery mode, instead of booting into TWRP I enter the fastboot screen.
I tried using mauronofrio's Tool All In One to flash stock ROM and possibly fix the partition, if thats what the problem is, but I cant tell it did anything.

Huawei T8600 Rename '/system/bin/sh' to 'sh_' by accident

Thank you for viewing this post!
My English is bad. If this post have any grammer error, I apologize.
Enviroment
Device: HUAWEI T8600
OS: Android 2.2
CPU: Marvell PXA920
Problems​
'/system/bin/sh' has been rename to 'sh_'
WIFI connect failed (stuck in 'get ip info' and then disconnected)
IMEI number lost
Root access lost
Cannot enter Recovery mode
Some app throw error
Cause & Trys​I want to replace the origin 'sh' binary by 'bash' for more shell syntax & compatibility.
So I get the root access by SuperOneClick.
Then I run the following code:
Bash:
adb shell
su
cd /system/bin
mv sh sh_
ping my_ip
I want to stop the Ping command, so I press Ctrl+C, at that time adb shell break.
(My origin purpose is to end the Ping command)
Then when I use 'adb shell' command, it returns '/system/bin/sh not found'.
I realize that I have done a big mistake, so I want use Terminal Emulator App for rename it back.
But it cannot be open. (show a line '/system/bin/sh not found' quickly and then quit)
Then I try Root Explorer, but it cannot be open. (it's shown that there has no Root access)
And my wifi cannot connet (stuck in get ip infomation).
I try restore factory settings & clear all user data, but it still seems useless.
I install Terminal Emulator again (use SD card), but it shows 'JNI init failed' and then quit.
After I do that, my imei number seems to be lost. (use *#06#, popup a white window)
And device cannot be detected by adb, Recovery mode cannot enter either.
I write a app to run 'echo hello,world' command, it's okay.
I write a app to run 'su' command, but it returns -1 and failed.
I searched web for a sulution, and then I found:
ROM: https://forum.xda-developers.com/t/almost-all-huawei-stock-roms-firmware-updated-28-06-12.1671527/
Similar Question: https://forum.xda-developers.com/t/q-system-bin-sh-deleted-accidently.1134925/
I tried to replace my phone's rom by Factory Mode (use *#*#2846579*#*#) -> Update, but it popup that 'IMEI error, cannot update'.
The question metioned in that link not support my device.
Then I tried to exact Update.app using Update.app Exactor, but it said 'Invaild data'.
Some Resources​
ROM (T8600V100R001C01B016SP13.zip)
/system/app backup (app.zip)
It's all my mistake, I regret very much.
What should I do to save my device?

Re-flash Stock ROM.

jwoegerbauer said:
Re-flash Stock ROM.
Click to expand...
Click to collapse
Thanks to reply
I tried to replace my phone's rom by Factory Mode (use *#*#2846579*#*#) -> Update, but it popup that 'IMEI error, cannot update'.
And I can't enter Recovery mode, I press keys but it soon started normally.
I search the web but found nothing about T8600 flash rom by usb.
And adb device & fastboot device can not detect my device now.
Is there other ways to flash that?

Typically this is accomplished by ADB SIDELOAD method.
In your initial post you mentioned that ADB is working. What's really true?

jwoegerbauer said:
Typically this is accomplished by ADB SIDELOAD method.
Click to expand...
Click to collapse
Thanks,
I searched web with ADB SIDELOAD.
It seems that I should enter TWRP.
But I have no TWRP installed.
Or it break when I restore factory settings, I don't sure. I press down key + Power, the android started normally.
Adb & fastboot cannot recognize my device now, so I can't flash a Recovery to my device.

Look inside here:
Download Huawei Flash Files & Tool(Stock ROM) - RepairMyMobile.co
Download Huawei Flash file & Tools, Stock ROM or Firmware used for flashing..why Huawei flashing fails and flash tool generate errors, free support site
repairmymobile.co

jwoegerbauer said:
Look inside here:
Download Huawei Flash Files & Tool(Stock ROM) - RepairMyMobile.co
Download Huawei Flash file & Tools, Stock ROM or Firmware used for flashing..why Huawei flashing fails and flash tool generate errors, free support site
repairmymobile.co
Click to expand...
Click to collapse
Thanks, but this link seems not contain my device's cpu & rom.
My device is T8600, and CPU is Marvell.

Do a Google search for a Stock ROM matching the phone at yourself.
If none found then take phone to authorized service center and let them try to fix it.

jwoegerbauer said:
Do a Google search for a Stock ROM matching the phone at yourself.
If none found then take phone to authorized service center and let them try to fix it.
Click to expand...
Click to collapse
Thanks.