Recently, I successfully ported TWRP from Coolpad Note 3 Lite to Modena 2. After testing, everything works fine, on both devices. Since this device has locked bootloader, we need to bypass this by enabling fastmmi mode and factory mode to enable temporary root access and make initial backup and flashing. So, let´s get started.
Remember to read this post carefully. I am not resposible for any damage to your device. If you brick your device while flashing the TWRP you can *almost* always recover it using SP Flash Tool and YGDP Tool
IF YOU ACCIDENTALY BRICK YOUR DEVICE AND YOU WANT TO FLASH IT VIA SPFT, DO NOT FORMAT THE DEVICE IN SPFT!!! If you´ll format partitions in TWRP, that´s fine, but don´t do FORMAT ALL + DOWNLOAD or FIRMWARE UPGRADE! This will brick your device, like mine This tutorial will not (hopefully) brick it, but just in case something goes wrong, now you know what not to do.
Preparing the environment on your computer
Windows
Download ADB and Fastboot from this link
Open it
Install it system-wide
Also, install the drivers
GNU/Linux (Ubuntu / Debian based distros)
Open terminal
Type "sudo apt install adb fastboot libusb-dev" without the quotes (")
Other things, that are required
Since the file size of the recovery exceeds the maximum 8MB of allowed upload size, you can download it from DataFileHost.
Preparing the device
First, you need to remeber that this could render your device unbootable and will void warranty.
Enable developer options
Go to Settings -> About phone
Tap the build number 7 times
Go back
Go to Developer options
Make sure OEM unlocking and USB Debugging is enabled
Enabling factory mode
Open dialer app
Dial *#9527*#
Click on "DM"
You will be prompted to insert RD personnel password. Enter: 54321
Click cancel button
DM button should change colour to RED
Exit the app by clicking home button
Installing and setting up openrp app
Open terminal / command prompt
Type:
Code:
adb start-server
Type:
Code:
adb devices
Now, click on your phone allow debugging and make sure to tick the radiobutton to remember / always trust this computer
Type:
Code:
adb install
Press spacebar after the install word and drag and drop the downloaded openrp.apk file to terminal
Hit enter
After it´s done, type:
Code:
adb shell monkey -p com.yulong.openrp -v 500
Now, the fun part. ROOTING the device
But before that, BACKUP
Now, keep your phone plugged in, and do a normal reboot by pressing and holding the power button and clicking reboot
When it vibrates, press and hold the Volume down key (Vol-)
You will see these lines on the screen:
Code:
=>[Factory mode]
Code:
=>VolumeDown key is pressed
Code:
=>[fastmmi mode]
After that, you´ll see the LED turns green and "Up Down" text on the screen
Now, back to your computer, type in the command prompt
Code:
adb devices
You should see XXXXXXXXXXXXXX device listed (where XXXX... is the serial number)
Type in the command prompt:
Code:
adb shell dd if=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/recovery of=/storage/self/primary/stock_recovery.img
and
Code:
adb shell dd if=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/boot of=/storage/self/primary/stock_bootimg.img
Flashing the TWRP Image
Type in the command prompt:
Code:
adb push (drag and drop the recovery image file here, like you did with the openrp.apk file) /storage/self/primary/
Type:
Code:
adb reboot
Press and hold VolumeDown key (Vol-) to boot to fastmmi mode
Type:
Code:
adb shell dd if=/storage/self/primary/recovery_twrp_e502.img of=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/recovery
Type
Code:
adb reboot
Press and hold the VolumeUp key (Vol+) to boot into recovery. If you see white screen with "Recovery" text in it, congrats. Everything is working. If not, try again.
Flashing the SuperSU package
Download the zip from SuperSU website
Copy the zip over to the device, with TWRP running
In TWRP, click install, click the zip and confirm the installation.
Factory reset is not required, but you should at least wipe the cache
If this post was useful for you, hit the thanks button
RESERVED
Hi i have a problem here. at the part to drag and drop the openrp file. When i have downloaded the file a drag it and drop it after the install word. The problem is that if I want to drop it there it will do nothing, nothing there shows or anything. Please respond.
I guess you can type the path to the installation file instead of dragging.
Hello,
Very helpful thread, my coolpad Modena 2 (E502) is now rooted.
Don't forget to disable the factory mode once everything is done, or you won't be able to access the storage to usb anymore.
Thanks.
helo, can i get help, when i try to install openrp on abd and fastboot, it printed this message "Failure [INSTALL_FAILED_SHARED_USER_INCOMPATIBLE]"
can anyone help me on that step, so i can root my e502
TCRakt said:
Hello,
Very helpful thread, my coolpad Modena 2 (E502) is now rooted.
Don't forget to disable the factory mode once everything is done, or you won't be able to access the storage to usb anymore.
Thanks.
Click to expand...
Click to collapse
how to disable the factory mode ?? :crying:
Firefa23 said:
how to disable the factory mode ?? :crying:
Click to expand...
Click to collapse
Hello,
If I recall correctly (I don't have the phone anymore, just touched it once to root it at the time), you basically undo the "Enabling factory mode" step.
I think if you dial the number, you'll be back in the menu where you have the option to disable the factory mode.
Factory mode should be disabled when 'DM' is green.
Good luck
very good
Need Custom rom please
nougat / pie
Hello, could you resend the twrp recovery file for this phone again?. old links not work!.
(sorry for my bad english)
Related
nexus s i9023 with ics offical rom rooted and unlocked but power button suddenly stopped working so i flashed a jb volume wake zip to enable this feature but it gave me a bootloop now i cant even recover because of the power button i managed to get in the fastboot mode by putting the battery and quickly press volume up but in fastboot the device is not even detected by the usb (original) i have sdk and usb drivers but the problem is i put my phone in usb its like ive put a potato nothing happens and the sentences usb control init and usb control init end have disappeared in fastboot mode so i cant send commands to the phone through adb is there a way to make my phone detectable although when my phone is in the bootloop process its detected by the computer normally but no response of course.
THANKS in ADVANCE
osos96 said:
nexus s i9023 with ics offical rom rooted and unlocked but power button suddenly stopped working so i flashed a jb volume wake zip to enable this feature but it gave me a bootloop now i cant even recover because of the power button i managed to get in the fastboot mode by putting the battery and quickly press volume up but in fastboot the device is not even detected by the usb (original) i have sdk and usb drivers but the problem is i put my phone in usb its like ive put a potato nothing happens and the sentences usb control init and usb control init end have disappeared in fastboot mode so i cant send commands to the phone through adb is there a way to make my phone detectable although when my phone is in the bootloop process its detected by the computer normally but no response of course.
THANKS in ADVANCE
Click to expand...
Click to collapse
EDIT/UPDATE 1: i managed to get into recovery mode :victory:
HOW? NOTICE: IM NOT RESPONSIBLE FOR ANY DAMAGE OF ANY KINND YOU DO TO YOUR PHONE USE AT YOUR OWN RISK
1. keep phone plugged in usb
2.download SDK Manager from (http://developer.android.com/sdk/index.html)
3.install it in root path in Windows 7>>>>>C:/Users/[yourusername]/SDK
4.boot your phone NORMALLY in boot loop
5.connect your phone in usb if you neglected step one
6.your computer should detect it
7.open command promote (CMD) (shortcut windows flag+R) type cmd
8.a black screen will appear type in it "cd SDK/sdk/platform-tools" and press enter
9.path now should be C:\users\[your user name] \SDK\sdk\platform-tools>adb shell second line [email protected]:/ #
10.now type this (copy and paste is recommended) "mount -o remount,rw -t yaffs2 /system /system"
11.now simply type reboot recovery and your phone should reboot in recovery img
12.wipe factory settings now you should be good
osos96 said:
EDIT/UPDATE 1: i managed to get into recovery mode :victory:
HOW? NOTICE: IM NOT RESPONSIBLE FOR ANY DAMAGE OF ANY KINND YOU DO TO YOUR PHONE USE AT YOUR OWN RISK
1. keep phone plugged in usb
2.download SDK Manager from (http://developer.android.com/sdk/index.html)
3.install it in root path in Windows 7>>>>>C:/Users/[yourusername]/SDK
4.boot your phone NORMALLY in boot loop
5.connect your phone in usb if you neglected step one
6.your computer should detect it
7.open command promote (CMD) (shortcut windows flag+R) type cmd
8.a black screen will appear type in it "cd SDK/sdk/platform-tools" and press enter
9.path now should be C:\users\[your user name] \SDK\sdk\platform-tools>adb shell second line [email protected]:/ #
10.now type this (copy and paste is recommended) "mount -o remount,rw -t yaffs2 /system /system"
11.now simply type reboot recovery and your phone should reboot in recovery img
12.wipe factory settings now you should be good
Click to expand...
Click to collapse
I will try it now! If this works, then you are superman for me :good:
Edit:
1. should I type "adb shell second line [email protected]:/ #" after the new path is set and press enter?
2. if I do it, i always get the message "the command mount is wrong or can not be found"
!Lür said:
I will try it now! If this works, then you are superman for me :good:
Edit:
1. should I type "adb shell second line [email protected]:/ #" after the new path is set and press enter?
2. if I do it, i always get the message "the command mount is wrong or can not be found"
Click to expand...
Click to collapse
Was much easier for me, don´t know why.
Solution for me:
1. Turn device into Bootloop
2. Connect it via USB (PC founds it)
3. type in CMD "adb reboot recovery"
4. device is in recovery
Requirement is a working Android-SDK.
!Lür said:
Was much easier for me, don´t know why.
Solution for me:
1. Turn device into Bootloop
2. Connect it via USB (PC founds it)
3. type in CMD "adb reboot recovery"
4. device is in recovery
Requirement is a working Android-SDK.
Click to expand...
Click to collapse
yup i just made it a step by step tut for noobs and your welcome
Recently I found out there was a kit kat update for my droid ultra it downloaded the update using 4G LTE and now and decided to install it then the phone shuts down and powers back up on its on I thought it was part of the update but this is the 100th time it's done it ive been waiting 8 hours for it to stop but it just keeps going it's not even showing any sign that it is updating!!!
I tried booting into recovery to factory reset it but whenever I select recovery it just boots up the phone normally HELP PLEASE!!!
response
droidusr2014 said:
Recently I found out there was a kit kat update for my droid ultra it downloaded the update using 4G LTE and now and decided to install it then the phone shuts down and powers back up on its on I thought it was part of the update but this is the 100th time it's done it ive been waiting 8 hours for it to stop but it just keeps going it's not even showing any sign that it is updating!!!
I tried booting into recovery to factory reset it but whenever I select recovery it just boots up the phone normally HELP PLEASE!!!
Click to expand...
Click to collapse
It appears as if you have installed some kind of rooting tool. The reason why the phone boots up normally after you choosing Recovery is because you don't have a custom recovery tool installed.
To solve this same problem, I factory reset my phone. (this is assuming that you have windows) To do this, install the Motorola Device Manager (google it and find the motorola support page, you can download it there) and reboot your computer.
Then connect the usb cable to your computer and download the android SDK platform tools from here -
ht tp://developer.android.com/sdk/index.html#download
^remove the space in ht tp because i can't post links
Extract the /sdk/platform-tools folder to a location which you can easily access.
Then, open command prompt and type
Code:
cd [mydirectory]
for example, if i stored the platform-tools folder on my desktop, i would type
Code:
cd C:\Users\[myusername]\Desktop\platform-tools
then open the bootloader (fastboot) by holding POWER and VOLUME-DOWN instead of just the power button when trying to boot.
OR type this into command prompt (your phone has to be turned on for this)
Code:
adb reboot bootloader
then, once your phone is in the bootloader (do not press anything on your phone at this point), type this in command prompt
Code:
fastboot -w
Remember, this will wipe all your user data / cache but it should make your phone work again. I'm not sure how to do this without factory resetting so if there are any users who are more experienced, feel free to post your better solution. thank you.
Thanks
Thank you so much currently I can't try out your method but it looks like it could work THANK YOU SO MUCH I'm going to try tonight and I'll tell you how it went. I really don't mind factory resetting as long as it saves my phone im all right thanks again :laugh:!!!
Pacnet_ said:
It appears as if you have installed some kind of rooting tool. The reason why the phone boots up normally after you choosing Recovery is because you don't have a custom recovery tool installed.
To solve this same problem, I factory reset my phone. (this is assuming that you have windows) To do this, install the Motorola Device Manager (google it and find the motorola support page, you can download it there) and reboot your computer.
Then connect the usb cable to your computer and download the android SDK platform tools from here -
ht tp://developer.android.com/sdk/index.html#download
^remove the space in ht tp because i can't post links
Extract the /sdk/platform-tools folder to a location which you can easily access.
Then, open command prompt and type
Code:
cd [mydirectory]
for example, if i stored the platform-tools folder on my desktop, i would type
Code:
cd C:\Users\[myusername]\Desktop\platform-tools
then open the bootloader (fastboot) by holding POWER and VOLUME-DOWN instead of just the power button when trying to boot.
OR type this into command prompt (your phone has to be turned on for this)
Code:
adb reboot bootloader
then, once your phone is in the bootloader (do not press anything on your phone at this point), type this in command prompt
Code:
fastboot -w
Remember, this will wipe all your user data / cache but it should make your phone work again. I'm not sure how to do this without factory resetting so if there are any users who are more experienced, feel free to post your better solution. thank you.
Click to expand...
Click to collapse
Will factory reset erase root??
One more thing I actually am currently rooted by using RockMyMoto so I think that is why the update didn't work but 1 last question when I factory reset will it erase root? I don't mind if it erases root but my main concern is that if root somehow stays I won't be able to do the software update.
Pacnet_ said:
It appears as if you have installed some kind of rooting tool. The reason why the phone boots up normally after you choosing Recovery is because you don't have a custom recovery tool installed.
To solve this same problem, I factory reset my phone. (this is assuming that you have windows) To do this, install the Motorola Device Manager (google it and find the motorola support page, you can download it there) and reboot your computer.
Then connect the usb cable to your computer and download the android SDK platform tools from here -
ht tp://developer.android.com/sdk/index.html#download
^remove the space in ht tp because i can't post links
Extract the /sdk/platform-tools folder to a location which you can easily access.
Then, open command prompt and type
Code:
cd [mydirectory]
for example, if i stored the platform-tools folder on my desktop, i would type
Code:
cd C:\Users\[myusername]\Desktop\platform-tools
then open the bootloader (fastboot) by holding POWER and VOLUME-DOWN instead of just the power button when trying to boot.
OR type this into command prompt (your phone has to be turned on for this)
Code:
adb reboot bootloader
then, once your phone is in the bootloader (do not press anything on your phone at this point), type this in command prompt
Code:
fastboot -w
Remember, this will wipe all your user data / cache but it should make your phone work again. I'm not sure how to do this without factory resetting so if there are any users who are more experienced, feel free to post your better solution. thank you.
Click to expand...
Click to collapse
Tried the method and it worked!!
I tried what you said and it worked perfectly but it still remembers my Wifi, wallpaper and all it showed the setup screen and I set it up so hopefully im in the clear the phone is downloading the update right now.
It will not allow the update and you will still end in boot loop. Need to remove root first: http://forum.xda-developers.com/showthread.php?t=2577029
Hi there!!
Well I was trying to root this phone since a month but due to lack of developers, it wasn't possible. So I tried and at last succeeded in rooting and porting TWRP recovery for Intex Aqua Music.
I tried to elaborate every step as much as I can so the tutorial becomes user friendly for everyone.
Disclaimer: Rooting immediately voids your phone's warranty, you should consider very carefully whether you need to gain root privileges. And this tutorial will format your phone. So backup you important files at the very first.
Tutorial
First download all the files which i left and the end of the thread and proceed with the tutorial.
First of all you need to install ADB Drivers.
Once drivers are installed, you need to enable USB Debugging in your phone.
(goto phone settings->About phone->scroll down and you’ll see an entry labelled ‘Build number.’ Keep on tapping till you see a prompt that says ‘You are now a developer)
Now in phone settings you will see a new option called Developer Options.
Now goto Developer Options and enable OEM Unlocking(for unlocking the bootloader so you can flash the TWRP recovery) and USB Debugging.
Now connect you phone with usb cable to computer and open the adb and fastboot folder which you downloaded.
Then open command prompt there(shift+right click) and type:
Code:
adb devices
You will see a popup on you phone screen, Select allow and ok
Now you will see your device listed there in command prompt.
Now type the following commands:
Code:
adb reboot bootloader
Phone will switch off and go into bootloader. Then type
Code:
fastboot oem unlock
Now you phone will ask for confirmation. Use Volume UP Button to select yes then type
Code:
fastboot continue
.
Now your device will reboot(it will take some time so don't worry)
Now once your phone boot up you will see its formatted and bootloader will be unlocked.
Now again goto setting and enable USB Debugging like before and connect you phone with pc.
Now copy the recovery.img from recovery zip which you downloaded to adb and fastboot folder.
Then in adb command prompt type the following commands like before
Code:
adb reboot bootloader
Wait for the phone to go into bootloader mode, then
Code:
fastboot flash recovery recovery.img
fastboot continue
Now twrp is flashed in your phone. Now to root your device copy the supersu zip to you phone.
Switch off your mobile, then press Volume Up + Power button together then choose recovery mode with Volume UP Button and
press Volume Down Button.
Now phone will boot into TWRP recovery mode.
Click Install and choose the Super Su zip from file manager then install it.
The click reboot and once your phone boots up its rooted now.
Enjoy!
Thanks button will be appreciated if the tutorial works for you.
Thanks
Thanks man, helpful
===============================================================================
TUTORIAL REVISED AND WRITTEN BY @parcek
===============================================================================
FURTHER UPDATED FOR ROOTING NOOBS: 10 Steps
Two Methods: Windows and Linux
Originally posted by @brad2192: https://forum.xda-developers.com/android/development/lg-aristo-2-root-t3746425
Credit to @tecknight for updated files: https://forum.xda-developers.com/showpost.php?p=76837384&postcount=2
@brad2192: Updated Tutorial due to people using TWRP (the original tutorial was released before TWRP was released for this device)
1) Backup all apps and data using LG Backup phone apps
2) Enable USB debugging and Unlock OEM. There are two methods in which you will to accomplish this:
First Method: Smartphone GUI
A) On your Lg Aristo 2 Smartphone go into General Tab (If in Tab View), If in list view, scroll down towards System section
"System Settings > About Phone > Software Information > Click on "Build Number" 10 times.
Now go to "System Settings > About Phone > Developer Options > Enable OEM unlock."
and also "System Settings > About Phone > Developer Options > Enable USB debugging."
Second Method: Windows Command Prompt or Linux Terminal:
Windows:
B) Click and drag "adb" file into command prompt and type "reboot bootloader" after it. Press enter.
Click and drag "fastboot" file into command prompt and type "flashing unlock" after it. Press enter.
Linux:
C)Type in your terminal "adb reboot bootloader" and press enter.
Type in your terminal "fastboot flashing unlock."
NOTE: Below has the information which will teach you how to download ADB and FASTBOOT.
3) Download the following:
Updated - TWRP
Updated - Magisk
(Add this file into your phone's SD Card.)
Updated - boot image
Update: Windows:
B)This is how you download ADB and FASTBOOT for Windows: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
4) Open Command Prompt. Then click and drag the adb file (from the latter download link a.k.a platform-tools) into command prompt then press space and type "reboot bootloader" after and then press enter OR power down phone and hold volume down while plugging in USB)
5) Open Command Prompt. Then click and drag the fastboot file (from the latter download link a.k.a platform-tools) into command prompt and then type "flash recovery" after it and then click and drag "newtwrp.img" into command prompt and press enter.)
6) Open Command Prompt. Then click and drag fastboot (from the latter download link a.k.a platform-tools) into command prompt and then type "flash boot" after it and then click and drag "bootimglistedabove.img" into the command prompt after and then press enter) then follow step 7).
Update: Linux:
C) Depending on kernel, for this sake we will use a debian based kernal.
This is how you download ADB and FASTBOOT for Linux: Open terminal and type: "Sudo apt-get install adb && sudo apt-get install fastboot"
4) Open terminal and type: adb reboot bootloader
5) Open terminal and type: fastboot flash recovery (and then click and drag newtwrp.img onto the terminal) and hit enter
6) Open terminal and type: fastboot flash boot (and then click and drag bootfilelistedabove.img onto the terminal) and hit enter
This applies towards both Windows and Linux: continuation after their last listed step written above.
Step 7) Remove battery from phone, in order to force a shut down.
8) Boot into Recovery-TWRP Mode.
How to boot into LG Aristo 2 TWRP Recovery:
a) The phone is off.
b) Hold the volume key and power key at the same time.
c) When the LG logo appears, let go of the power key (while still holding the volume down key) and then click and hold the power key once again.
d)You will be prompted to LG Aristo 2's stock recovery mode asking you if you are sure you would like to delete ur phone.
e) Go to the option "yes" and enter.
f) It will then warn you that can remove all data from your phone.
g) Go to the option "yes" and enter.
You will be in TWRP after this.
TWRP Mode:
9) In TWRP go to "Wipe > Format Data" and then type "yes" and confirm it. (Do not hit reboot, click back a few time and hit reboot > recovery)
10) In TWRP go to "Install > Select Storage" and select your SD Card. Then look for where you placed the "magisk" zip file. Install it.
Your phone is now rooted.
On TWRP menu: Reboot.
Restore your phone if you created an LG backup of your important files (like lets say contacts or applications).
-----------------------------------------------
If any mistakes were made and you phone becomes locked, here is how to go into download mode to repair your LG Aristo 2 into its default stock rom. Credit to @tecknight: https://forum.xda-developers.com/showpost.php?p=76837800&postcount=4
1) Power off phone.
2) connect usb to Lg Aristo 2 phone (without connecting the usb into the PC or laptop)
3) Hold volume up key and then connect USB into computer
4) download LG Bridge
5) detect phone
6) click on "Update Error Recovery"
Your LG Aristo 2 will be repaired and factory resetted.
-------------------------------------------------------------
What root means: In terms of PC language, Root means the superuser that has privileges to Add, Modify, and or Delete any kind of system files without prevention. Pretty much, it's like the actual Administrator account on a PC. Natively, whenever we buy a phone, it is as if to say, we are only using a guest account. Since the android OS is basically a Linux based computer (correct me if i am wrong) we can do anything we like... You want iOS emoji's on an android? A custom boot animation? Having root privileges allows you to go beyond your guest user restrictions because you then become the Admin.
Explaining the function of the provided Magisk app: It allows root privileges for programs intended for rooted phones.
There are other popular programs alternative of Magisk app, such as the SuperSU app: http://www.mediafire.com/file/2dljobq6yw93w76/UPDATE-SuperSU-v2.82-20170528234214.zip
--------------------------------
After being officially done setting up your rooted phone, make sure you disable OEM Unlock to avoid seeing the caution message before every boot.
--------------------------
How to backup your phone.
Also, using ADB, backup your phone.
Windows: Click and drag ADB file onto command prompt and paste " backup -apk -shared -all -f "C:\Users\UserName\Desktop\backupfilename.ab" "
Linux: Open terminal and type " adb backup -apk -shared -all -f "C:\Users\UserName\Desktop\backupfilename.ab" "
Update: For those who are encountering "Now unlock your phone and confirm operation" when typing the latter code, there is an alternative and much more easier and safer way to backup your phone.
Boot into TWRP and click on "backup" and then select what you would like to back up and then swipe to confirm the operation.
-----------------------------------------------------------------
Confirmed Successful rooting for LG Aristo 2 - June 2018
Thank You Brad and Tec!
Salam Aleykom.
You are a lifesaver my friend
Senorhamburgler said:
You are a lifesaver my friend
Click to expand...
Click to collapse
Brad I have a question, is there any way to get a custom ROM on this phone? If not how come? How does it all work?
And are you with Metro PCS as well? What apps can a safely delete to get this phone as close to a stock version of android as I can? Can I seriously just wipe out EVERY metro app? Hows your phone functioning?
tribal1209 said:
Brad I have a question, is there any way to get a custom ROM on this phone? If not how come? How does it all work?
And are you with Metro PCS as well? What apps can a safely delete to get this phone as close to a stock version of android as I can? Can I seriously just wipe out EVERY metro app? Hows your phone functioning?
Click to expand...
Click to collapse
Until there is a custom recovery built, we won't have custom roms. Dont wipe out every metro app. Anything you arent sure about, look up, or just freeze the app and test results. My phone is fine except SuperSU wont work properly due to the binary being occupied, but this is the best we have so far. I debloated no problem.
tribal1209 said:
Brad I have a question, is there any way to get a custom ROM on this phone? If not how come? How does it all work?
And are you with Metro PCS as well? What apps can a safely delete to get this phone as close to a stock version of android as I can? Can I seriously just wipe out EVERY metro app? Hows your phone functioning?
Click to expand...
Click to collapse
Senorhamburgler said:
Until there is a custom recovery built, we won't have custom roms. Dont wipe out every metro app. Anything you arent sure about, look up, or just freeze the app and test results. My phone is fine except SuperSU wont work properly due to the binary being occupied, but this is the best we have so far. I debloated no problem.
Click to expand...
Click to collapse
Root is the only thing needed, not a custom recovery. Apps like Magisk Manager can flash custom images. The reason there is no ROMs built for this device, I can tell you in my opinion there is no need for a Custom ROM. Magisk Manager has plenty of customizations available as well as many other root apps. Basically, custom recoveries are obsolete, it is not needed for gaining root access nor flashing files. Magisk can do it as well as Flashfire.
I need help.... Abd is not functioning it states "the term abd is not recognised as the nane of a cmdlet, function, scrip file of operable program."
Does not exist in current location.... Windows PowerShell does not load conmands by default...
MinaSaotome said:
I need help.... Abd is not functioning it states "the term abd is not recognised as the nane of a cmdlet, function, scrip file of operable program."
Does not exist in current location.... Windows PowerShell does not load conmands by default...
Click to expand...
Click to collapse
Hey man, I would press the Windows Key+R and type" "cmd"
Then, as long as your adb is located at C:\adb type: "cd C:\adb"
Then use adb, I hate how Windows 10 forces it on users!
Hey, I am so sorry to bother you but when I enter in the fourth step of your tutorial, it tells me "flash boot" command doesn't exist. Is there something I'm doing wrong?
---------- Post added at 01:15 AM ---------- Previous post was at 01:01 AM ----------
4btn said:
Hey, I am so sorry to bother you but when I enter in the fourth step of your tutorial, it tells me "flash boot" command doesn't exist. Is there something I'm doing wrong?
Click to expand...
Click to collapse
Okay, after messing around with it a few, I found that once it goes off into fastboot... my computer can't recognize it anymore?
brad2192 said:
Hey guys, spent a few hours figuring out how to root. Pretty Simple!
1) Enable Developer Options, USB Debugging & OEM Unlock
2) Reboot to Fastboot Mode (Using ADB via PC type: adb reboot bootloader)
3) Add root_boot.img into your adb folder
4) In ADB type: fastboot flash boot root_boot.img
5) After flash successful, type: fastboot reboot
6) Install Magisk Manager App
For those skeptical, proof of root here.
X-210 Stock .KDZ Backup HERE (Should not be needed.)
Click to expand...
Click to collapse
Do I need to unlock the bootloader first? I have it rebooted into fastboot and it's giving me instructions to do that, but won't let me push the boot image. If I do need to unlock it, does it wipe my device?
tge101 said:
Do I need to unlock the bootloader first? I have it rebooted into fastboot and it's giving me instructions to do that, but won't let me push the boot image. If I do need to unlock it, does it wipe my device?
Click to expand...
Click to collapse
Yes, that is what OEM unlock means. In doing so you do need to unlock the bootloader.
brad2192 said:
Yes, that is what OEM unlock means. In doing so you do need to unlock the bootloader.
Click to expand...
Click to collapse
Just wanted to make sure but does it wipe it?
tge101 said:
Just wanted to make sure but does it wipe it?
Click to expand...
Click to collapse
Yes, when you use "fastboot oem unlock" it unfortunately erases all data. One of our forum members is working on a TWRP at the moment that might be available today. You could wait to do this so you can create a backup.
brad2192 said:
Yes, when you use "fastboot oem unlock" it unfortunately erases all data. One of our forum members is working on a TWRP at the moment that might be available today. You could wait to do this so you can create a backup.
Click to expand...
Click to collapse
That'd be cool. But, wouldn't the bootloader still need to be unlocked for me to flash TWRP?
tge101 said:
That'd be cool. But, wouldn't the bootloader still need to be unlocked for me to flash TWRP?
Click to expand...
Click to collapse
I'm an idiot, yes LOL. Sorry, just got to work and I am tired you are correct. So, if you would like I suggest just using my tutorial. I believe there is ways of using LG backup to save most of your user data.
brad2192 said:
I'm an idiot, yes LOL. Sorry, just got to work and I am tired you are correct. So, if you would like I suggest just using my tutorial. I believe there is ways of using LG backup to save most of your user data.
Click to expand...
Click to collapse
All good, if I lose it I lose it. Is there a thread for the TWRP development?
I posted a test twrp on my blog for aristo 2
cannot open root_boot.img
hey maybe someone can help me out
previously already unlocked the bootloader on the phone so i skipped that step but i keep getting the error that it can not open root_boot.img
downloaded the file and moved into users/appdata/local/android/sdk/platform-tools
thats where adb.exe so i figured that is the adb folder maybe yes or no
could anyone help me out
greatly appreciate it
tge101 said:
All good, if I lose it I lose it. Is there a thread for the TWRP development?
Click to expand...
Click to collapse
Update: TWRP HERE
TJ-yesthelegend said:
hey maybe someone can help me out
previously already unlocked the bootloader on the phone so i skipped that step but i keep getting the error that it can not open root_boot.img
downloaded the file and moved into users/appdata/local/android/sdk/platform-tools
thats where adb.exe so i figured that is the adb folder maybe yes or no
could anyone help me out
greatly appreciate it
Click to expand...
Click to collapse
What are you typing into ADB to get that error?
Do you have to de-encrypt the phone for root? I am thinking of getting an Aristo2, currently using the MotoE4 (which I hate!), and rooting that requires de-encryption (I love encryption!). This is the MetroPCS version your talking about? Thank you...
Hi,
during the update the phone got stuck, daughter restarted couple of times but it always got to the 76%, hang there and then restarted itself in the endless loop.
I've tried the the hard reset (Power+VolUP) and it got to the screen saying "No Command". Then I pressed the same combo again to get to the bootloader and tried the wipe / reset. During that process I got the error message "E: Can't send SPI message. Try again" and then it said it was successful, but rebooting did nothing, got stuck in the restart loop.
So I've done the research and wanted to to upload the OTA update, have done that but that didn't do anything.
So I've found some articles on how to upload the stock rom/image but I'm unable to do so as sending adb commands is disabled due to the phone being LOCKED. I've learned that the USB debugging needs to be enabled, however I'm unable to get into the OS to set it up, so found this article:
How to enable USB Debugging in Android using recovery mode?
One million questions, Is it possible to Enable USB Debugging in Android Using Recovery Mode or any other technique? Well, the answer is Yes! It is now
www.isrgrajan.com
which outlines the following steps (in summary):
Download the Stock ROM for your device- Google it, I am dam sure you can find it. [DONE]
Download SuperSU from UPDATE-SuperSU-v1.65.zip [DONE][looks pretty old though]
Steps to Enable USB Debugging Using Recovery Mode
Unzip the stock ROM. [DONE]
Within the extracted folder, you will find the system.img well extract it too using Ext4 Unpacker [DONE but plenty of folder are empty, but eventually plentu of APK along]
Also, extract the Update-SuperSU.v1.65.zip file. [DONE, again, looks pretty old]
Now open the folder where you have extracted the system.img files [DONE]
Grab any .apk file from this folder and change the extension from .apk to .zip [PROBLEM: the apks are all over the shop. Which APK shall I pick up?]
And Copy the RSA Certificated to the Update-SuperSU.v1.65 folder (delete previous files if exist) [PROBLEM: unable to find any "RSA Certificated" like files once I open ANY apk]
Also, copy the build.prop to the system folder located within Update-SuperSU.v1.65 folder [BLOCKED by previous step]
Locate the update-script file within this folder and edit it using Notepad++ [BLOCKED by previous step]
You need to update the build.prop file after adding the following line at the bottom [BLOCKED by previous step]
persist.service.adb.enable=1
Next step is updating SQLite Database [WHERE would I do this step?]
Which can be done by adding the following code to the update-script file
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "UPDATE global SET value=1 WHERE name='adb_enabled'"
What would I do then? How to actually apply the changes back to the phone?
Does anyone know of better / latest step by step process of enabling / unlocking the device or is my device now completely and unrepairably bricked?
Thank you.
Android - Enable ADB from recovery
Android - Enable ADB from recovery. GitHub Gist: instantly share code, notes, and snippets.
gist.github.com
jwoegerbauer said:
https://gist.github.com/varhub/7b9555cdd1e5ad785ffde2300fcfd0bd
Click to expand...
Click to collapse
For a while (since when, I don't know) persistent properties are not shared as individual files in /data/property.
They are all packed inside /data/property/persistent_properties.
Try setprop instead.
jwoegerbauer said:
Android - Enable ADB from recovery
Android - Enable ADB from recovery. GitHub Gist: instantly share code, notes, and snippets.
gist.github.com
Click to expand...
Click to collapse
will give it a go. thank you.
jwoegerbauer said:
Android - Enable ADB from recovery
Android - Enable ADB from recovery. GitHub Gist: instantly share code, notes, and snippets.
gist.github.com
Click to expand...
Click to collapse
I've tried the steps but I'm crashing on sending any commands to the device. While I'm in the recovery, I see the following details and options:
```
Android Recovery
google/blueline/blueline
12/SP1A.210812.016.B2/8602260
user/release-keys
Use volume up/down and power
Warning: Previous installation has failed. Your device may fail to boot if you reboot or power off now
- Reboot system now
- Reboot to bootloader
- Enter Fastboot
- Apply Update from ADB
- Apply update from SD card
- Wipe data/factory reset
- Mount /system
- View recovery logs
- Run Graphics Test
- Run Locale Test
- Power Off
```
where I run the adb command:
`adb shell mount data` I get the `adb.exe: no devices/emulators found`.
when I go to the `Apply update from ADB` and run the command above I get `error: closed`.
Basically I'm unable to run any adb commands as of the first message, and the only place I can it's from within the update. I've noticed that while in the 'Update via ADB', then in the Win Device Manager I can see that the driver is changed to `Android Composite ADB Interface` and only now it's accepting very limited commands. `adb devices` command generates: `<device id number>: sideload`.
When in the fastboot, it switches to `Android Bootloader Interface` in the DEvice manager.
When in recovery, the device is disconnected from the computer. (is not listed in the device manager)
any thoughts. thanks
Note: that phone was never rooted.
Bootloader looks like this at the moment:
```
Fastboot Mode
Product revision: blueline MP1.0(ROW)
Bootloader version: b1c1-0.4-7617406
Basebandversion...
serial number:
secure booth: PRODUCTION
NOS Production: yes
DRAM: 4GB
Device State: Locked
Boot slot: a
```
vajnorcan said:
I've tried the steps but I'm crashing on sending any commands to the device. While I'm in the recovery, I see the following details and options:
```
Android Recovery
google/blueline/blueline
12/SP1A.210812.016.B2/8602260
user/release-keys
Use volume up/down and power
Warning: Previous installation has failed. Your device may fail to boot if you reboot or power off now
- Reboot system now
- Reboot to bootloader
- Enter Fastboot
- Apply Update from ADB
- Apply update from SD card
- Wipe data/factory reset
- Mount /system
- View recovery logs
- Run Graphics Test
- Run Locale Test
- Power Off
```
where I run the adb command:
`adb shell mount data` I get the `adb.exe: no devices/emulators found`.
when I go to the `Apply update from ADB` and run the command above I get `error: closed`.
Basically I'm unable to run any adb commands as of the first message, and the only place I can it's from within the update. I've noticed that while in the 'Update via ADB', then in the Win Device Manager I can see that the driver is changed to `Android Composite ADB Interface` and only now it's accepting very limited commands. `adb devices` command generates: `<device id number>: sideload`.
When in the fastboot, it switches to `Android Bootloader Interface` in the DEvice manager.
When in recovery, the device is disconnected from the computer. (is not listed in the device manager)
any thoughts. thanks
Note: that phone was never rooted.
Bootloader looks like this at the moment:
```
Fastboot Mode
Product revision: blueline MP1.0(ROW)
Bootloader version: b1c1-0.4-7617406
Basebandversion...
serial number:
secure booth: PRODUCTION
NOS Production: yes
DRAM: 4GB
Device State: Locked
Boot slot: a
```
Click to expand...
Click to collapse
On my pixel3, /dev/block/dm-4 is mounted to /data. Try "adb shell mount /dev/block/dm-4 /data".
The instructions you are following are very old, and likely obsolete. SuperSu is also obsolete. Try to find a newer method.
dcarvil said:
On my pixel3, /dev/block/dm-4 is mounted to /data. Try "adb shell mount /dev/block/dm-4 /data".
The instructions you are following are very old, and likely obsolete. SuperSu is also obsolete. Try to find a newer method.
Click to expand...
Click to collapse
the issue is I'm unable to run that command `adb shell mount...` with the `no devices/emulator found` message. I believe it's because the device is not even listed in the device manager (windows) when in recovery mode. When in the update mode, then it's listed in the DM. See my post above, I've updated it few times. Thanks
Btw on that link if you check the posts there are newer ones (1.5y back) claiming it works so might actually work
If you're unable to sideload the OTA via PC, I don't think there's any other option besides paying for a repair, or replacing the device. A locked bootloader definitely makes recovery a lot harder.
V0latyle said:
If you're unable to sideload the OTA via PC, I don't think there's any other option besides paying for a repair, or replacing the device. A locked bootloader definitely makes recovery a lot harder.
Click to expand...
Click to collapse
I'm able to sideload the OTA, but restart goes into start being stuck and back and forth but never gets any further than the first google load screen
vajnorcan said:
I'm able to sideload the OTA, but restart goes into start being stuck and back and forth but never gets any further than the first google load screen
Click to expand...
Click to collapse
Were you using adb/fastboot before this happened? Was the device recognised then? If not, are you sure you have the right drivers?
AlexKarimov said:
Were you using adb/fastboot before this happened? Was the device recognised then? If not, are you sure you have the right drivers?
Click to expand...
Click to collapse
I've used the adb to upload the ota and that went, according the message ok, but the system won't start up. Device is recognized only when I choose the "Apply update from ADB" option in recovery mode. The moment I choose it, it shows up as a device in device manager and "adb devices" lists it ok. In fastboot mode it does list it in device manager, but "adb devices" doesn't list it.
It's the latest driver
vajnorcan said:
I've used the adb to upload the ota and that went, according the message ok, but the system won't start up. Device is recognized only when I choose the "Apply update from ADB" option in recovery mode. The moment I choose it, it shows up as a device in device manager and "adb devices" lists it ok. In fastboot mode it does list it in device manager, but "adb devices" doesn't list it.
It's the latest driver
Click to expand...
Click to collapse
If I understand correctly, you're using "adb devices" when in fastboot mode? You need to use "fastboot devices". If that works and lists the phone then you may be able to use the flash tool on the Google website
AlexKarimov said:
If I understand correctly, you're using "adb devices" when in fastboot mode? You need to use "fastboot devices". If that works and lists the phone then you may be able to use the flash tool on the Google website
Click to expand...
Click to collapse
This requires OEM Unlocking to be enabled so it won't be much help here.
Rescue Mode might work though.
@vajnorcan try this:
Boot to bootloader and select Rescue Mode using the volume buttons, then press Power to enter it.
On your PC, go to pixelrepair.withgoogle.com and connect the USB cable to your device. Select your carrier or select "Other" if device is unlocked.
I don't know whether this will actually work...I haven't heard of anyone using this tool to successfully recover.
AlexKarimov said:
If I understand correctly, you're using "adb devices" when in fastboot mode? You need to use "fastboot devices". If that works and lists the phone then you may be able to use the flash tool on the Google website
Click to expand...
Click to collapse
'fastboot devices' is reading the device, which is good. but trying the online flash tool fails due to the device being locked. :/
V0latyle said:
This requires OEM Unlocking to be enabled so it won't be much help here.
Rescue Mode might work though.
@vajnorcan try this:
Boot to bootloader and select Rescue Mode using the volume buttons, then press Power to enter it.
On your PC, go to pixelrepair.withgoogle.com and connect the USB cable to your device. Select your carrier or select "Other" if device is unlocked.
I don't know whether this will actually work...I haven't heard of anyone using this tool to successfully recover.
Click to expand...
Click to collapse
The google tool has found and connected to the device, but it ends up in an error (on the device) and saying "disconnected", looked promising, but not for long. thanks.